summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/diskspace.c
AgeCommit message (Collapse)AuthorFilesLines
2011-10-12diskspace: extract check_mountpoint() functionDan McGee1-17/+23
This will be useful when extending disk space checks to free space checking before we download package files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08diskspace: fix memory leak on root mount not foundDave Reisner1-1/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08Use more correct integer types in diskspace checksDan McGee1-14/+15
This adjusts type usage to match POSIX provided types from <sys/types.h> rather than assuming everything will fit in a long or unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as appropriate. These are affected the same way off_t is on 32 bit platforms, where the types are extende to 64 bits if large file support is enabled. Because most numbers here are block counts, this isn't near as pressing as using a 32-bit variable for file sizes where anything over 2GiB can burn you; we likely can support files at least 512 but mainly 4096 times larger. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-03Former transaction callback rename refactorDan McGee1-3/+3
Put all the callback stuff in alpm.h in one spot, and make the following renames for clarity with the new structure: ALPM_TRANS_EVT_* --> ALPM_EVENT_* ALPM_TRANS_CONV_* --> ALPM_QUESTION_* ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_* alpm_option_get_convcb() --> alpm_option_get_questioncb() alpm_option_set_convcb() --> alpm_option_set_questioncb() Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-03Move all callbacks up to the handle levelDan McGee1-3/+3
This was just disgusting before, unnecessary to limit these to only usage in a transaction. Still a lot of more room for cleanup but we'll start by attaching them to the handle rather than the transaction we may or may not even want to use these callbacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-20Remove alpm_option_get_* usage from backendDan McGee1-1/+1
These are all available directly on the handle without indirection. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18Remove usages of alpm_list_next() in backendDan McGee1-3/+3
Another function call that can be replaced by a single pointer dereference. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15libalpm: fix a remaining old syntax of RET_ERR() macroRémy Oudompheng1-1/+1
It would prevent compilation of pacman on FreeBSD, and possibly other systems. Signed-off-by: Rémy Oudompheng <remy@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-21Convert package filelists to an array instead of linked listDan McGee1-8/+16
This accomplishes quite a few things with one rather invasive change. 1. Iteration is much more performant, due to a reduction in pointer chasing and linear item access. 2. Data structures are smaller- we no longer have the overhead of the linked list as the file struts are now laid out consecutively in memory. 3. Memory allocation has been massively reworked. Before, we would allocate three different pieces of memory per file item- the list struct, the file struct, and the copied filename. What this resulted in was massive fragmentation of memory when loading filelists since the memory allocator had to leave holes all over the place. The new situation here now removes the need for any list item allocation; allocates the file structs in contiguous memory (and reallocs as necessary), leaving only the strings as individually allocated. Tests using valgrind (massif) show some pretty significant memory reductions on the worst case `pacman -Ql > /dev/null` (366387 files on my machine): Before: Peak heap: 54,416,024 B Useful heap: 36,840,692 B Extra heap: 17,575,332 B After: Peak heap: 38,004,352 B Useful heap: 28,101,347 B Extra heap: 9,903,005 B Several small helper methods have been introduced, including a list to array conversion helper as well as a filelist merge sort that works directly on arrays. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee1-16/+16
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03diskspace: remove all libarchive usageDan McGee1-41/+7
Now that the filelists capture mode and size information, we can read the data from there and prevent having to loop through and uncompress every archive to check required diskspace usage. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Move alpm filelists to a struct objectDan McGee1-3/+4
This allows us to capture size and mode data when building filelists from package files. Future patches will take advantage of this newly available information, and frontends can use it as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-01Prefix _alpm_errno_t members with ALPMAllan McRae1-6/+6
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-01Prefix alpm_transprog_t members with ALPMAllan McRae1-3/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-01Prefix alpm_loglevel_t members with ALPMAllan McRae1-11/+11
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmtrans_t to alpm_trans_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae1-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-27Fix several -Wshadow warningsDan McGee1-4/+4
Only one of these looked like a real red flag, in find_requiredby(), but it doesn't hurt to fix several of them up anyway. Unfortunately, we can't turn this on universally due to things like the sync(), remove(), etc. builtins which we often use as variable names. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Switch all logging to use handle directlyDan McGee1-11/+11
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Move pm_errno onto the handleDan McGee1-7/+7
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee1-1/+1
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove global handle from diskspace.cDan McGee1-12/+10
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Push down extern handle variable to files that need itDan McGee1-0/+3
This will make the patching process less invasive as we start to remove this variable from all source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21syntax: if/while statements should have no trailing spaceDan McGee1-3/+3
This is the standard, and we have had a few of these introduced lately that should not be here. Done with: find -name '*.c' | xargs sed -i -e 's#if (#if(#g' find -name '*.c' | xargs sed -i -e 's#while (#while(#g' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-16Merge branch 'maint'Dan McGee1-2/+2
Conflicts: lib/libalpm/alpm.h lib/libalpm/trans.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-06diskspace: add the actually used statfs type in ifdefsRémy Oudompheng1-2/+2
Some systems, like FreeBSD might define both statfs and statvfs: however if statvfs exists whereas getmntinfo() uses a statfs struct, the current ifdefs would select the wrong line of code. Signed-off-by: Rémy Oudompheng <remy@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-21Style change: return(x) --> return xDan McGee1-11/+11
This was discussed and more or less agreed upon on the mailing list. A huge checkin, but if we just do it and let people adjust the pain will end soon enough. Rebasing should be relatively straighforward for anyone that sees conflicts; just be sure you use the new return style if possible. The following semantic patch was used to do the change, along with some hand-massaging in order to preserve parenthesis where appropriate: The semantic match that finds this problem is as follows, although some hand-massaging was done in order to keep parenthesis where appropriate: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a; @@ - return(a); + return a; // </smpl> A macros_file was also provided with the following content: Additional steps taken, mainly for ASSERT() macros: $ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c $ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-17Ensure we have a root partition when checking spaceDan McGee1-2/+13
Partially addresses the "why doesn't CheckSpace work in a chroot" issue. We can't make it work, but we can at least detect when it won't work by checking for a partition for our given installation root. If we can't determine the mountpoint for this, bail out with an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-17Add missing newline to warning messageAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-02libalpm/diskspace.c: remove bogus parenthesisXavier Chantry1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: allow used flag to be toggled for both remove and installDan McGee1-2/+3
Turn it into an enum rather than a boolean, and use a bitmask like we do for reading DB entries. The relevant flag is turned on in our two calculate loops, and anything reading the used flag later can decided which flag (or either) is relevant. This will allow the read-only partition code to be triggered on a remove-only operation, e.g. if /boot was read-only and one tried to remove grub in a sync transaction. Of course, right now, we don't actually run the diskspace check code in the '-R' codepath. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Check mountpoint read-only status when checking spaceDan McGee1-4/+20
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: use calloc instead of mallocDan McGee1-10/+2
Prevents us from having to manually zero out several of our fields. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Fix mount dir length calculationDan McGee1-3/+3
In the getmntinfo() section, the local variable mnt doesn't exist; this would have caused a compile error if I had tested the code on such a platform. Unify both codepaths to just run strlen() on the already copied mount path instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Skip diskspace checking for symlinks and directories in all casesDan McGee1-42/+43
We did this in some but not all cases, assuming the 0 value coming out of libarchive would not be a problem. However, this does not work for "fake" filesystems such as rpc_pipefs, which reports a free block and total block count of zero. Fix this by not ever counting symlinks or directories, and adding a note explaining that if we someday do count directories, their size needs to be attributed to the proper place. This patch also includes a few cleanups/performance tweaks- avoid calling strlen() on the mountpoint directory string as much by storing this size in our mountpoint struct, and push the snprintf() call up to the calculate functions since we were already doing it here in the remove case. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Call archive_read_data_skip() while checking diskspaceDan McGee1-0/+7
libarchive eventually calls it anyway, but backtraces make a lot more sense if we call it, as well as matching our precedent from alpm_pkg_load(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Add error message stating which partition is fullDan McGee1-7/+10
This is helpful anyway to the user, and should also be helpful to us if we see problems cropping up in the check during development. Also add a missing ->used = 0 initialization in the code path less taken. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Ensure we use local package when calculating removed sizeDan McGee1-5/+7
We were checking if a package existed locally, but then using the incoming package to calculate removed size rather than the currently installed package. Also adjust the local variable in the replaces loop to make it more clear that we are always dealing with local packages here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Remove need for floating point division in backendDan McGee1-10/+10
All of these can be done with integer division; the only slightly interesting part is ensuring we round up like before with calling the ceil() function. We can also remove the math library from requirements; now that the only ceil() calls are gone, we don't need this anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Fix some more simple conversion "errors"Dan McGee1-10/+10
None of these warn at the normal "-Wall -Werror" level, but casts do occur that we are fine with. Make them explicit to silence some warnings when using "-Wconversion". Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Use size_t for alpm_list sizesAllan McRae1-3/+3
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21Only check diskspace availability if needs more than zeroAllan McRae1-1/+2
The amount of diskspace needed for a transaction can be less than zero. Only test this against the available disk space if it is positive, which avoids a comparison being made between signed and unsigned types (-Wsign-compare). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Add a cushion for diskspace checkingDan McGee1-3/+8
It is the minimum of 5% of disk capacity or 20 MiB on a per-partition basis. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13diskspace style cleanups and small fixesDan McGee1-48/+53
* Use our normal return() function syntax * Rework a few things to reduce number of casts * Fix void function argument declaration * Add missing gettext _() call * Remove need for seperate malloc() of statvfs/statfs structure * Unify argument order of static functions- mountpoints now always passed first * Count all files that start with '.' in a package against the DB * Rename db to db_local in check_diskspace to clarify some code * Fix some line wrapping to respect 80 characters Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-12-13Refactor statfs/statvfs type checkDan McGee1-34/+17
Turn it into a configure-type typedef, which allows us to reduce the amount of duplicated code and clean up some #ifdef magic in the code itself. Adjust some of the other defined checks to look at the headers available rather than trying to pull in the right ones based on configure checks. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-12-13Display progress bar for disk space checkingAllan McRae1-2/+17
Checking disk space needed for a transaction can take a while so add an informative progress bar. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Implement disk space checkingAllan McRae1-1/+42
Pull together the work of the previous commits to implement a check for enough free space before performing an install transaction. Abort if there is not enough free space with an appropriate pm_errno.. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Add functions to calculate approximate disk usage by packagesAllan McRae1-0/+100
Two helper function are added to calculate the disk usage from packages that are either currently installed on the system or from a package archive. Some minor approximations have been made: 1. Size for directories is not considered when removing a package from the filesystem to avoid multiple counting across packages. Also, these are reported to take zero size while installing. 2. Symlinks are reported to contribute zero size towards removal as libarchive reports them to have zero size for install. 3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards usage on dbpath on install, but their size is not counted on package removal. 4. No handling of extra size needed for .pacsave/.pacnew files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-17 12:44:24 +0100