summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/error.c
AgeCommit message (Collapse)AuthorFilesLines
2009-01-13Remove libdownload support and fix libfetch one.Xavier Chantry1-4/+1
Aaron said to consider libdownload a dead project so libdownload support was removed to more easily fix libfetch one (otherwise many ifdef needed). There was no direct replacement for ferror to detect an error while downloading. So instead, I added a check at the end to see if the file was fully downloaded, which is just a small chunk of code taken from here: http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-01Make libfetch the 'native' download libraryDan McGee1-3/+3
Use libfetch naming in the code in place of libdownload names. This is in preparation for dropping support for libdownload at some point as libfetch can run on Linux. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26Fix some fallout from the delta/download changesDan McGee1-1/+1
We removed one too many FREELIST() calls when trying to fix some memleaks, and add a safety/sanity check to ensure filename is set, as packages in old DBs are likely to not have this field. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-19Give libalpm native support for both libdownload and libfetchDan McGee1-2/+16
This should remove the need for any additional patching to run on platforms that have libfetch available but not libdownload. It isn't the prettiest, but we have kept our libdownload impact down to just a few files, so it can be easily done. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Allow disabling of internal (libdownload) codeDan McGee1-3/+9
Add a new --disable-internal-download flag to configure allowing the internal download code to be skipped. This will be helpful on platforms that currently don't support either libdownload or libfetch (such as Cygwin) and for just compiling a lighter weight pacman binary. This was made really easy by our recent refactoring of the download code into separate internal and external functions, as well as some error code cleanup. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Remove unnecessary header file, move one macro to util.cDan McGee1-1/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07libalpm error cleanup, step 1Dan McGee1-14/+11
Remove unused error codes, begin refactoring some of the others. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-18Kill PM_TRANS_TYPE_ADD.Chantry Xavier1-2/+0
This was totally useless. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-28libalpm: clean up of md5sum functions.Chantry Xavier1-4/+2
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum, and only used once, so not very useful. I removed them. Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated, so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-12-11Update GNU GPL boilerplate and copyright datesDan McGee1-4/+2
Update the GPL boilerplate to direct people to the GNU website for a copy of the license, as well as bump all of Judd's copyrights to 2007. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17War on whitespaceDan McGee1-3/+3
Run the kernel's cleanfile script on all of our source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-20Download delta files if UseDelta is set.Nathan Jones1-0/+5
Delta files will be used if the size is smaller than a percent (MAX_DELTA_RATIO) of the package size. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-12make alpm_strerror binding friendlyStefano Esposito1-0/+5
I'm currently working on python bindings for alpm written in pyrex. While working i found that declaring alpm_strerror as char * alpm_strerror (void) instead of char * alpm_strerror (int err) and then using pm_errno in the implementation instead of err, could make it more bindings-friendly. Dan: cleaned up and added void to declaration. Instead of replacing existing function, add a new function called 'alpm_strerrorlast(void)'. Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-22Post trial install changes, round oneDan McGee1-0/+2
A bunch of changes related to my first "real" install of pacman-git into /usr/local and trying to use it. * Shift some uses of free -> FREE in libalpm. * Move stat and sanity checks of config paths into libalpm from the config and argument parsing in pacman.c. * Fix issue where dbpath still was not defined early enough due to its requirement for being used in alpm_db_register. This should be rewritten so it doesn't have this dependency, but this will work for now. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-13Remove some more diskspace checking holdover stuffDan McGee1-2/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-05Const correctness!Dan McGee1-1/+1
Add some 'const' keywords all over the code to make it a bit more strict on what you can and can't do with data. This is especially important when we return pointers to the pacman frontend- ideally this would always be untouchable data. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-05Rip alpm_parse_config out of libalpmDan McGee1-9/+0
Switch over to the new frontend parseconfig. * Fix a few issues in parseconfig * Remove unused callback upon database registration * Remove conf file related errors from error.c/alpm.h Signed-off-by: Dan McGee <dan@archlinux.org>
2007-04-27Clean up gettext on the libalpm sideDan McGee1-2/+0
Remove inclusion of libintl.h from all files, because we can do it once in util.c where the _() macro is defined. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-05This commit looks much more monumental than it is. Almost all just #includeDan McGee1-0/+6
reordering and adding ones that were forgotten (noticed when trying to compile after reordering). * Updated the HACKING file to include information on #include usage. * print -> vprint in "making dir" function in pactest.
2007-02-09* Fixed some missing error values in strerrorAaron Griffin1-14/+22
* Cleanup up some error enum values * Revamped the 'pmserver_t' functionality. Less allocation, removed a param and cleaned up some duplicate URL parsing
2007-02-08Attempt to NOT remove packages on filesystem errors (like a read-onlyAaron Griffin1-0/+2
filesystem). See FS#5887
2007-01-30K. Piche <kpiche@rogers.com>Aaron Griffin1-1/+1
* gcc visiblity changes Also modified _alpm_versioncmp -> alpm_versioncmp (public function) as per K. Piche's suggestions
2007-01-18Dan McGee <dpmcgee@gmail.com>Aaron Griffin1-1/+1
* Removed some unnecessary headers and library links * Made things static if possible * Cleaned up makefiles a bit * Fixed some old comments in the code * Fixed some errors the static code checker splint pointed out * Backwards arguments in a memset call in _alpm_db_read (could have been worse) * Other various small fixes Other: * Default to 80 columns when getcols cannot determine display width * Removal of ._install as a valid install file in packages
2006-11-16* makepkg.conf.in variable changes (missed the checkin)Aaron Griffin1-1/+1
* Better error reporting when unpacking an archive fails * Fixed -Sc and -Scc cache dir opening/reading
2006-10-31Numerous changes:Aaron Griffin1-0/+2
* Furthered the "lazy caching" to force the pkgcache to read nothing (INFRQ_NONE) by default. Anything requiring package data should now check the infolevel of each package and attempt to update it. This could be ironed out a bit more later (by using the front-end get_info function * Switched to libfetch. Drastic changes to the download code and the callback progress bar functions. Also fixed the return value of _alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and files urls, along with 'mtime's and numerous other fancy features from libfetch.
2006-10-15Merged frugalware changes (too many to list). Also added some config fileAaron Griffin1-2/+26
handling changes (support [sections] to carry over to included files - this helps with backwards compatibility with existing pacman config files)
2006-09-28removed libtar support in favour of libarchiveJudd Vinet1-0/+2
2006-05-15first stage of i18n stuff from VMiklosJudd Vinet1-37/+39
2006-03-08removed an uneeded error code (DB_UPTODATE)Aurelien Foret1-2/+0
2006-02-07error codes cleanupAurelien Foret1-3/+4
2006-01-21resolvedeps: return the depmiss info to the frontend in case of failureAurelien Foret1-2/+0
2006-01-13removed unuseful error codesAurelien Foret1-3/+0
2006-01-02patch from VMiklos - use PACKAGE_VERSION instead of PACMAN_VERSIONJudd Vinet1-1/+1
2005-10-09added more error messages, enabled the db permission check in trans_commitJudd Vinet1-6/+36
2005-10-09Added an error string for lock file creation failureAurelien Foret1-0/+3
2005-04-17renamed PM_ERR_INVALID_NAME to PM_ERR_PKG_INVALID_NAMEAurelien Foret1-1/+1
2005-03-15Initial revisionJudd Vinet1-0/+90