| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Replaced calls to the STRNCPY macro with the actual strncpy function, and
pacman passes all pactests.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
* Skip running scriptlet when chroot fails - to prevent issues in the host
filesystem
|
|
* correct _alpm_rmrf usage with regard to symlinks and directories
|
|
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
|
|
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
|
|
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand
* Mostly removed the INFRQ_ parameters from outside the be_files backend (making
the backend more extensible in the long run)
* packages created from _alpm_db_scan now have the db and origin set (making
accessors actually work for these packages)
* removed _alpm_db_ensure_pkgcache
* totally revamped the _alpm_checkconflicts function, making it cleaner and
easier to read (and thus fix in the long run) - maintainable code ftw
NOTE: feel free to rename the functions... I couldn't think of anything better
* removed an extra loop in sync.c:find_replacements - no sense in looping over
an entire DB while strcmp'ing the name, when we have get_pkgfromcache
Other:
* package struct "license" -> "licenses"
* Created _alpm_sync_find (duplicate code in some places, find_pkginsync
* Minor const correctness changes along the way
* fixed a couple extra '/' pathing issues (non-issues really)
* removed a duplicate pkg_cmp function
|
|
want the actual number of characters, not the number of bytes.
* Added a TODO to take care of later in scriptlet processing.
|
|
unbelievable amount of strcmp() calls (25 million) due to the list searching.
This has been reimplemented with a set-intersection scheme, due to the fact
that file lists are always ordered. - NEEDS TESTING
* Minor clean up, "globalized" the str_cmp helper to match the alpm comparison
signature, so we can use it elsewhere.
|
|
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
|
|
* ALPM_LOG_FUNCTION macro and all the great work to add this macro everywhere
|
|
* Fix up add.c a bit better than it was in regards to FS #3492.
* Optimized the sqrt call in dependency cycle checking to a single call.
* Removal of an outdated comment.
|
|
* Fix FS #5409- document that pacman.conf repo ordering is important
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
|
|
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
|
|
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
|
|
* Removed some unnecessary headers and library links
* Made things static if possible
* Cleaned up makefiles a bit
* Fixed some old comments in the code
* Fixed some errors the static code checker splint pointed out
* Backwards arguments in a memset call in _alpm_db_read (could have been worse)
* Other various small fixes
Other:
* Default to 80 columns when getcols cannot determine display width
* Removal of ._install as a valid install file in packages
|
|
Addition of a forced fflush in an attempt to diagnose mutli-logging
Removal of varargs from the internal logaction function, they are handled in
alpm_logaction just fine
|
|
* avoid repeated regex compilations (regex for search string do not
change while scanning the package database)
* remove needless string duplication (regex function do not change target
string nor free them)
* code cleanup
This patch improves search performance:
bash-3.2$ time ./src/pacman/pacman.static.old -Ss "(database|web).*server" >/dev/null
real 0m1.026s
user 0m0.544s
sys 0m0.208s
bash-3.2$ time ./src/pacman/pacman.static -Ss "(database|web).*server" >/dev/null
real 0m0.777s
user 0m0.456s
sys 0m0.128s
bash-3.2$
|
|
* Modified some dependancy checking
* Changed "performing local database upgrade" message to be more clear
* Change 'usize' to 'isize' in database files
* Scriptlet output is now sent to pacman's log file
* Limited some debugging output to be more clear
|
|
(no PKGBUILD)
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
|
|
* Better error reporting when unpacking an archive fails
* Fixed -Sc and -Scc cache dir opening/reading
|
|
machine - still pending
* Addition of _alpm_pkg_makefilename to simplify the with/without -ARCH prefix
scheme we're going with for the interim
|
|
* Addition of hacky architecture check in the _splitname function
* Removal of libfetch from the archlinux proper - it has been renamed to
libdownload and can be found at http://phraktured.net/libdownload
* Merge of _some_ of the Frugalware makepkg change - this may still be
incomplete
* Removal of libftp from cvs proper
* PKGBUILD manpage now says 'PKGBUILD' instead of FrugalBuild (he he)
|
|
* Furthered the "lazy caching" to force the pkgcache to read nothing
(INFRQ_NONE) by default. Anything requiring package data should now check
the infolevel of each package and attempt to update it. This could be
ironed out a bit more later (by using the front-end get_info function
* Switched to libfetch. Drastic changes to the download code and the callback
progress bar functions. Also fixed the return value of
_alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and
files urls, along with 'mtime's and numerous other fancy features from
libfetch.
|
|
from db to whatever format we need.
|
|
* Removed the PMList typedef, in favor of the same naming scheme other
structs use 'pmlist_t'
* Added a time stamp on debug output, to make it more informational
* Moved alpm_db_register to _alpm_db_register, making the public function
not take a callback parameter
|
|
handling changes (support [sections] to carry over to included files - this
helps with backwards compatibility with existing pacman config files)
|
|
|
|
|
|
|
|
- code cleanup
|
|
|
|
- renamed _alpm_log_action to _alpm_logaction
|
|
tabulations)
|
|
|
|
<vmiklos@frugalware.org>)
- code reowrk to ensure the /tmp/alpm_foo directory is always removed
|
|
(patch from Christian Hamaer <krics@linuxforum.hu>)
|
|
|
|
|
|
environment
|
