summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/util.c
AgeCommit message (Collapse)AuthorFilesLines
2010-10-14Move and rename splitnameAllan McRae1-0/+45
The splitname function is a general utility function and so is better suited to util.h. Rename it to _alpm_splitname to indicate it is an internal libalpm function as was the case prior to splitting local and sync db handling. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee1-1/+43
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder1-5/+6
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27redirect scriptlet stderr synchronously through alpmJonathan Conder1-36/+55
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well. For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and all callbacks in the child process have been replaced for thread-safety. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-01Check return value of chdir and getcwdAllan McRae1-4/+4
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-01Check return value of fwrite when copying filesAllan McRae1-1/+9
Check that writing to destination file actually occurs in _alpm_copyfile. Required adding a new error (PM_ERR_WRITE) as none of the others appeared appropriate. Prevents compiler warning when using -D_FORTIFY_SOURCE=2. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-20Clarify testing within conditional statementsAllan McRae1-1/+1
Follow the HACKING guidelines and always use != 0 or == 0 rather than negation within conditional statements to improve clarity. Most of these are !strcmp usages which is the example of what not to do in the HACKING document. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-03-15Bump copyright dates to 2010Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Only extract new DB entriesXavier Chantry1-1/+2
This implements FS#15198. The idea apparently came from Csaba Henk <csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to him, even though I did not look at the code :) The idea is to only extract folders for new packages into the package database and clean up the old directories. This is essentially implementing Xyne's "rebase" script within pacman. If using -Syy, just remove and extract everything. If using -Sy : 1. Generate list of directories in DB 2. Generate list of directories in archive 3. Compare both 4. Clean up old directories 5. Extract new directories Original-work-by: Allan McRae <allan@archlinux.org> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: fix compile error, s/int/size_t/] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16Refactor do/while cycle and multiple while cyclesLaszlo Papp1-4/+7
* It makes the code clearer to read/understand * Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd [Dan: don't change the coding style] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-11Merge branch 'maint'Dan McGee1-1/+2
2009-10-28Fix opendir error condition checksDan McGee1-1/+2
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch: opendir(path)) == (DIR *)-1; is maybe the result of misunderstanding the manpage. If an opendir() call isn't successful it returns NULL rather than '(DIR *)-1'. Noticed-by: Laszlo Papp <djszapi@archlinux.us> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Rework the alpm_unpack functionsXavier Chantry1-11/+44
Add support to extract a list of entries Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11cygwin fix : use unsigned char for ctype functionXavier Chantry1-2/+2
See http://www.nabble.com/-PATCH-RFA--Distinguish-between-EOF-and-character-with-value-0xff-td23161772.html#a23188494 cygwin 1.7 actually displays a warning when using signed char with the ctype function, so that compilation fails when using -Wall -Werror. So we just cast all arguments to unsigned char. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11libalpm: clean up lock functionDan McGee1-8/+5
We were doing a lot of manual work; leverage the standard library a bit to do more for us. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11int typing: s/unsigned short/int/ in libalpmDan McGee1-2/+1
After our recent screwup with size_t and ssize_t in the download code, I found the `-Wsign-conversion` flag to GCC to see if we were doing anything else boneheaded. I didn't find anything quite as bad, but we did have some goofups- most of our public unsigned methods would return -1 on error, which is a bit odd in an unsigned context. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-07libalpm/util.c : remove _alpm_strreplaceXavier Chantry1-45/+0
This function is unused since commit 358cc5804a2df873180e6d9ef2420ab3247f8437. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: also kill from util.h] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-03Add a missing newline.Xavier Chantry1-1/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-03Use full path to ldconfigMarc - A. Dahlhaus1-1/+1
If /sbin is not in the PATH and sudo is used, ldconfig cannot be found. So use /sbin/ldconfig instead. The code checked for the existence of /sbin/ldconfig anyway.. Signed-off-by: Marc - A. Dahlhaus <mad@wol.de> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-16Run ldconfig inside chroot.Xavier Chantry1-3/+100
This fixes FS#15294. The code to run a command inside a chroot was refactored from the _alpm_runscriptlet function to _alpm_run_chroot. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-07-01Update copyright headers and messagesDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-20alpm_unpack : change prefix handling to workaround FS#12148.Xavier Chantry1-8/+24
Instead of appending the prefix to each entry name, we can chdir to the prefix before extracting, and restoring when it is done. This seems to work better with the strange and special case of FS#12148 where an archive contained the "./" entry. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-01-18Merge branch 'maint'Dan McGee1-2/+2
2009-01-18Use archive_entry_set_perm instead of archive_entry_set_modeNagy Gabor1-2/+2
This patch fixes FS#12148 ('unstable' regular file). I also changed the other archive_entry_set_mode usage in add.c to archive_entry_set_perm. Since I cannot find any relevant info in libarchive manual, I quote Tim Kientzle (the author of libarchive) here, and I say thank you for his help. *** Tim Kientzle wrote ************************************* This is the problem in libalpm/util.c: 323 if(S_ISREG(st->st_mode)) { 324 archive_entry_set_mode(entry, 0644); 325 } else if(S_ISDIR(st->st_mode)) { 326 archive_entry_set_mode(entry, 0755); 327 } Your example unstable.db.tar.gz is not empty. It has one entry in it, called "./". That entry is marked as a directory. But, when you call archive_entry_set_mode(), you are changing the file type! archive_read_extract() then creates the file /var/unstable as you requested. (archive_read_extract() will replace an empty directory with a file.) You should either set the mode value correctly: 323 if(S_ISREG(st->st_mode)) { 324 archive_entry_set_mode(entry, IFREG | 0644); 325 } else if(S_ISDIR(st->st_mode)) { 326 archive_entry_set_mode(entry, IFDIR | 0755); 327 } Or use archive_entry_set_perm(), which does not change the file type: 323 if(S_ISREG(st->st_mode)) { 324 archive_entry_set_perm(entry, 0644); 325 } else if(S_ISDIR(st->st_mode)) { 326 archive_entry_set_perm(entry, 0755); 327 } ************************************************************ Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13Rename alpm_get_md5sum to alpm_compute_md5sum and alpm_dep_get_string to ↵Nagy Gabor1-2/+2
alpm_dep_compute_string This patch introduces the following function name convention: _compute_ in function name: the return value must be freed. _get_ in function name: the return value must not be freed. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03libalpm: add PID to db.lckAllan McRae1-2/+13
This is the first step in being able to automatically remove phantom lock files. Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: fix compilation warnings] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13libalpm: handle syscall interruption correctlyDan McGee1-1/+2
It is possible to throw EINTR from a system call such as open(), close(), or waitpid() if custom signal handlers are set up and they are not initialized with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT) was given during the call to waitpid(), causing it to throw the EINTR error and we could not accommodate it. Simply wrap these calls in a simple loop that allows us to retry the call if interrupted. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-20Remove an usused variable from alpm/util.c/_alpm_lckmk()Nagy Gabor1-10/+2
Probably a tweakable "lockdb-retry" option was planned which is not implemented. (Now it should be implemented in front-end.) So now this variable was unused and caused a small memleak. (FREE(dir) was not reached in case of error.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-09Fix segfault on x86_64 when using UseSyslogDan McGee1-2/+9
Due to differences in handling va_list between i686 and x86_64, this bug can only be seen on x86_64. va_list usage is not allowed but we had been getting away with it. See http://lists.opensuse.org/opensuse-programming/2008-02/msg00005.html for details and explanation. This fixes FS#11096. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-25Remove unused strverscmp substituteDan McGee1-102/+0
Our internal vercmp function was the only user of this, and it no longer relies on it. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-16Use access() instead of stat() when possibleDan McGee1-8/+4
We were using the stat() system call in quite a few places when we didn't actually need anything the stat struct returned- we were simply checking for file existence. access() will be more efficient in those cases. Before (strace pacman -Ss pacman): % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 33.16 0.005987 0 19016 stat64 After: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 34.85 0.003863 0 12633 1 access 7.95 0.000881 0 6391 7 stat64 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-15Fix compilation warning on x86_64Dan McGee1-1/+1
Glad we have so many developers using this as their native architecture. int/size_t issue here. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-10Update makepath to remove PATH_MAX usageDan McGee1-17/+21
The start of a few commits to remove some PATH_MAX usage from our code. Use a dynamically allocated string instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-29Updates to _alpm_copyfile()Dan McGee1-8/+14
Rework to use a single #define for the buffsize, and in the process clean up some other code and double the default buffer size. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26Completely rework delta algorithmChantry Xavier1-2/+2
Using the graph structures that Nagy set up for dependency sorting, we now do a similar process for deltas. Load up all of the deltas into a graph object on which we can then apply Dijkstra's algorithm, using the new weight field of graph struct. We initialize the nodes weight using the base files that we can use in our filecache (both filename and md5sum must match). The algorithm then picks the best path among those that can be resolved. Note that this algorithm has a few advantages over the old one: 1. It is completely file agnostic. These delta chains do not have to consist of package files- this could be adopted to do delta-fied DBs. 2. It does not use the local_db anymore, or even care if a package or file is currently installed. Instead, it only looks in the filecache for files and packages that match delta chain entries. Original-work-by: Dan McGee <dan@archlinux.org> Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-04-15Some comments for _alpm_unpack.K. Piche1-0/+11
Signed-off-by: K. Piche <kevin@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Remove unnecessary header file, move one macro to util.cDan McGee1-1/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07libalpm error cleanup, step 1Dan McGee1-1/+1
Remove unused error codes, begin refactoring some of the others. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-27Add an archive_fgets() functionDan McGee1-0/+29
This crude function allows reading from an archive on a line-by-line basis similar to the familiar fgets() call on a FILE stream. This is the first step in being able to read DB entries straight from an archive. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-28libalpm: clean up of md5sum functions.Chantry Xavier1-7/+20
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum, and only used once, so not very useful. I removed them. Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated, so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-14FS#9183 : force correct permissions on tmp/.Jaroslaw Swierczynski1-2/+7
[Xav: removed unneeded makepath_internal function, and fixed the permission value : 1777 -> 01777] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-13Ensure correct dir permissions in the database.Chantry Xavier1-0/+2
Fix for FS#9176. A previous commit (6e8daa553bbd5) already forced all database files to 644. Now the directories are also forced to 755. Additionally, repo-add now sets the umask to 022, just like makepkg does, to fix the problem at its root. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-13util.c : fix segfault when the cachedir isn't usable.Chantry Xavier1-2/+0
For example, if the cachedir is a broken symlink or a non writable directory, pacman fallbacks to /tmp/. Just before doing that, it freed the handle->cachedirs list twice ! once in _alpm_filecache_setup, and once in alpm_option_set_cachedirs. So the first one was removed. Fixes FS#9186. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-06Don't stat cachedir immediatelyDan McGee1-3/+0
By attempting to stat the cachedir when we load the pacman config, pacman bails out if it is a non-existant directory, even if it will never be needed. This is unfortunate as it is only used for sync transactions anyway. Instead, wait until we need it in _alpm_filecache_setup to actually do anything. Reported as FS#9096. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-11Update GNU GPL boilerplate and copyright datesDan McGee1-4/+2
Update the GPL boilerplate to direct people to the GNU website for a copy of the license, as well as bump all of Judd's copyrights to 2007. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-09_alpm_unpack: return 1 when the file is not found.Chantry Xavier1-1/+2
If _alpm_unpack has a specific file to extract (not NULL), but doesn't find it, it'll now return 1, for indicating the failure. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Force mode of all database files to 644Aaron Griffin1-11/+24
In the case of a packaging error where install or changelog had bad permissions, pacman respected the original permissions without trying to fix it - this means that some operations (changelog) artificially required root permissions to run In addition, minor function housekeeping on _alpm_unpack Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-17War on whitespaceDan McGee1-4/+4
Run the kernel's cleanfile script on all of our source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-16libalpm: simplify sync db lastupdateDan McGee1-14/+0
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string time storage abstraction in favor of just writing the time_t value to the disk. The only drawback is that everyone's sync DBs will have to be updated at least once so that the lastupdate values are stored right. :) Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-11libalpm: fix lstat wrapper to actually use newpathDan McGee1-1/+1
Commit b55abdce7aebb142ce79da3aa3645afe7693a3c4 introduced an lstat wrapper function that never dereferences paths with a trailing slash, but still called lstat on path instead of newpath. Oops! Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-01 16:14:30 +0100