summaryrefslogtreecommitdiffstats
path: root/lib/libalpm
AgeCommit message (Collapse)AuthorFilesLines
2011-03-09Remove all traces of libfetchDave Reisner4-316/+2
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09dload: temp patch to allow curl/fetch coexistanceDave Reisner1-1/+15
this is just some debuggery to allow pacman to operate with both fetch and curl at the same time. use the PACMANDL variable to control which library is used. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09dload.c: add curl_download_internalDave Reisner1-0/+208
This is a feature complete re-implementation of the fetch based internal downloader, with a few improvements: * support for SSL * gzip and deflate compression on HTTP connections * reuses a single connection over the entire session for lower resource usage. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09handle error case for PM_ERR_LIBCURLDave Reisner2-0/+9
Add PM_ERR_LIBCURL to error enum and handle case in error.c by returning curl_easy_strerror() based on the error number carried by the gloabl alpm handle. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09share code between libfetch and libcurlDave Reisner1-10/+12
no actual code changes here. change preprocessor logic to include get_tempfile, get_destfile, signal handler enum, and the interrupt handler logic when either HAVE_LIBCURL or HAVE_LIBFETCH are defined. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09prefix fetch based functions with fetch_Dave Reisner1-6/+6
Do this in preparation for implementing similar curl based functionality. We want the ability to test these side by side. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09handle: Add CURL* and CURLcode vars to structDave Reisner2-0/+16
Adding the CURLcode is necessary in order to return an error string from pm_error. Unlike libfetch, curl returns numerical error numbers and does not maintain a staticly allocated string with the last error generated. Adding the curl object itself to the handle is advantageous (and encouraged by curl_easy_perform(3)) because the handle is reusable for successive operations. This cuts back on overhead when downloading multiple files in a single transaction. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09add curl to alpm initialization and teardown routinesDave Reisner3-0/+21
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-07Do not print warning with files entry in sync dbAllan McRae1-2/+4
repo-add can add a "files" entry into the sync db. Currently we do nothing with this file, so explicitly skip it to prevent unknown database file warnings. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-03Fix gettext plural detectionDan McGee1-1/+1
Our keywords were all screwed up in this regard. Fix it so our ngettext() shortcut calls are actually recognized and respected. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-02libalpm/diskspace.c: remove bogus parenthesisXavier Chantry2-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-01Ensure d_type is not DT_UNKNOWN before relying on itDan McGee1-9/+13
Fixes FS#23090, a rather serious problem where the user was completely unable to read the local database. Even if entry->d_type is available, the given filesystem providing it may not fill the contents, in which case we should fall back to a stat() as we did before. In this case, the filesystem was XFS but there may be others. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-01Fix some easy to find double translationsDan McGee4-22/+7
A lot of these were places that should have used the same message but didn't, or were very easy to convert to using the same message and letting some of the burden off of the translators. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Update translation template filesDan McGee1-42/+82
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Check local DB version before continuing transactionDan McGee8-3/+88
Ensure we have a local DB version that is up to par with what we expect before we go down any road that might modify it. This should prevent stupid mistakes with the 3.5.X upgrade and people not running pacman-db-upgrade after the transaction as they will need to. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Move locking functions to where they are neededDan McGee3-49/+48
We only call these from the transaction init and teardown, so move them to that file, mark them static, and push more of the logic of handle manipulation into these functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Fix trans no-argument function definitionsDan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-27Fix double close of the lock fileJonathan Conder5-15/+10
According to FOPEN(3), using fclose on an fdopen'd file stream also closes the underlying file descriptor. This happened in _alpm_lckmk (util.c), which meant that when alpm_trans_release closed it again, the log file (which reused the original file descriptor) was closed instead. Signed-off-by: Jonathan Conder <jonno.conder@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25alpm: alpm_db_get_pkgcache_list => alpm_db_get_pkgcacheDave Reisner8-20/+20
This avoids needless breakage of the public API. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25alpm: remove public visibility of pmpkghash_tDave Reisner5-22/+7
There's no API functions exposed which allow manipulation of this type, so remove it from public view. Also, rename the public and private alpm_db_get_pkgcache symbol to alpm_db_get_pkgcache_has. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Continue resolving dependencies rather than bailing on first errorDan McGee1-16/+20
This allows error messages emitted by the frontend to be a bit more descriptive and not have the annoying "well why didn't you tell me that the first time" problem. If a package had multiple missing deps, we would bail on the first one before rather than finish processing all missing dependencies, and only print one error message. Instead, continue through this entire set of missing deps and append all eventual errors. The added pactest tests this case, as the to be installed package has two missing dependencies. However, pactest does not actually test or see the difference in output from before and after, so it passes in both cases, but it is clearly visible in the logs. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Various small spelling fixes and small tweaksDan McGee2-7/+12
Nothing that changes behavior here. Spelling fixes and pushing a variable down to the scope it is used. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-24Mark log callback format string constDan McGee3-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-22Remove trans->skip_addDan McGee3-10/+0
This is old code that has since gone stale; we no longer ever add anything to this list so no need to keep it around and check the contents during extraction. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-17Don't generate filelist unless we are going to use itDan McGee1-1/+1
We throw it away if !full, so no need to waste time creating the list in the first place. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-17Conflict checking code cleanupDan McGee2-31/+13
* Make conflict_isin() static; it is used nowhere else. * Remove does_conflict(): it turns out to be replaceable by a single call to _alpm_depcmp(). By pushing it up, we can reduce calls to _alpm_splitdep() from 60,368 to 16,940 during one test -Su operation I ran. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-15Fix some database size estimation problemsDan McGee3-11/+32
* Use stat() and not lstat(); we don't care for the size of the symlink if it is one, we want the size of the reference file. * FS#22896, fix local database estimation on platforms that don't abide by the nlink assumption for number of children. * Fix a missing newline on an error message. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-15Use CALLOC for _alpm_graph_new()Pang Yan Han1-11/+2
Change _alpm_graph_new() to use CALLOC to avoid explicit zeroing out of fields in pmgraph_t. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: allow used flag to be toggled for both remove and installDan McGee2-3/+9
Turn it into an enum rather than a boolean, and use a bitmask like we do for reading DB entries. The relevant flag is turned on in our two calculate loops, and anything reading the used flag later can decided which flag (or either) is relevant. This will allow the read-only partition code to be triggered on a remove-only operation, e.g. if /boot was read-only and one tried to remove grub in a sync transaction. Of course, right now, we don't actually run the diskspace check code in the '-R' codepath. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Check mountpoint read-only status when checking spaceDan McGee2-4/+21
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: use calloc instead of mallocDan McGee1-10/+2
Prevents us from having to manually zero out several of our fields. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Fix mount dir length calculationDan McGee1-3/+3
In the getmntinfo() section, the local variable mnt doesn't exist; this would have caused a compile error if I had tested the code on such a platform. Unify both codepaths to just run strlen() on the already copied mount path instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Avoid a memmove by advancing value pointerDan McGee1-0/+1
In packages, our description file contains: key = value is here type entries, and we passed "key " and " value is here" to our strtrim function, causing us to always memmove the value portion to remove the space. Since this is a throwaway buffer, do the advancing on our own before trimming to save the need to shift memory around; "value is here" will now be passed and strtrim will be responsible for trailing whitespace. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Fix fileconflict progress with only one packageDan McGee1-2/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Skip diskspace checking for symlinks and directories in all casesDan McGee2-42/+44
We did this in some but not all cases, assuming the 0 value coming out of libarchive would not be a problem. However, this does not work for "fake" filesystems such as rpc_pipefs, which reports a free block and total block count of zero. Fix this by not ever counting symlinks or directories, and adding a note explaining that if we someday do count directories, their size needs to be attributed to the proper place. This patch also includes a few cleanups/performance tweaks- avoid calling strlen() on the mountpoint directory string as much by storing this size in our mountpoint struct, and push the snprintf() call up to the calculate functions since we were already doing it here in the remove case. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Refactor out common code in pkghash add functionsPang Yan Han1-30/+15
The overlapping code in _alpm_pkghash_add() and _alpm_pkghash_add_sorted() are now in a new static function pkghash_add_pkg(). This function has a third flag parameter which determines whether the package should be added in sorted order. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Handle null pkgcache for local/sync db_populate()Pang Yan Han2-1/+11
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not caught, allowing the functions to continue instead of exiting. A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse invalid pointers in a non-existent db->pkgcache->list. pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return NULL when we run out of memory / exceed max hash table size. The local/sync db_populate() functions are also exited. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-06Merge branch 'maint'Dan McGee4-0/+1565
2011-02-06Remove redundant _alpm_strtrim() in be_local.cPang Yan Han1-9/+9
When reading the "desc" file in _alpm_local_db_read(), some strings are trimmed and checked for length > 0 before their use/duplication subsequently. They are then trimmed again when there is no need to. The following code snippet should illustrate it clearly: while(fgets(line, sizeof(line), fp) && strlen(_alpm_strtrim(line))) { char *linedup; STRDUP(linedup, _alpm_strtrim(line), goto error); info->groups = alpm_list_add(info->groups, linedup); } This patch removes the redundant _alpm_strtrim() calls in _alpm_local_db_read() such as the one inside the STRDUP shown above. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Handle PM_ERR_WRITE in alpm_strerror()Pang Yan Han1-0/+2
PM_ERR_WRITE is defined in alpm.h but not handled in alpm_strerror(). This patch corrects that. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add new translations from TransifexDan McGee4-0/+1565
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Update translation file indexes and MakevarsDan McGee2-2/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add comment about download file resolutionDan McGee1-0/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Merge remote-tracking branch 'allan/hash'Dan McGee15-73/+610
2011-02-04Add more error checking and loggingDan McGee2-2/+6
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Ensure found files are actually filesDan McGee2-3/+4
We located files in a few places but didn't check if they were files or directories. Ensure they are actually files using stat() and S_ISREG(); this showed itself when trying to download to the directory name itself in FS#22645. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Improve pkghash_remove algorithmDan McGee1-19/+43
Rather than potentially move every item to the next NULL, attempt to move at most one item at a time by iterating backwards from the NULL location in the hash array. If we move an item, we repeat the process on the now shorter "chain" until no more items need moving. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Use alpm_list_remove_item in pkghash_removeDan McGee1-31/+4
Removes the code that was duplicated and has now been refactored into a separate method. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add new alpm_list_remove_item() functionDan McGee2-33/+54
This takes in the list and a list item, and does the pointer dance necessary to remove it from the list regardless of whether it is first, last, or somewhere in the middle. It is useful for callers that already know what item needs to be removed and have a pointer to it rather than doing a search by data that the plain alpm_list_remove() does. Refactor alpm_list_remove() to use this function as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Actually remove packages from pkghash on removalAllan McRae3-10/+31
Fully removes a package from the hash. Also unify prototype with removal from an alpm_list_t, fixing issues when removing a package from the pkgcache. Signed-off-by: Allan McRae <allan@archlinux.org>