| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the user switches from unstable repo to a stable one, it is quite hard to
sync its system with the new repo (the user will see many "Local is newer
than stable" messages, nothing more). That's why I introduced -Suu, which
treats a sync package like an upgrade, iff the package version doesn't match
with the local one's.
I added a new pactest (sync104.py) to test this, and I updated the
documentation of -Su.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: slight doc reword]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#15546
Also fix the interface of unlink_file which was really stupid..
(alpm_list_t used with only one element)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
A package can now replace symdir->dir by dir without fileconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When one package wants to replace a directory by a file, we check that all
files in that directory were owned by that package.
Additionally pacman can be more verbose when the extraction of the symlink
(or file) fails. The patch to add.c looks more complex than it is, I just
moved and reindented code to handle cases 10 and 11 together.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
"Foo replaces bar" simply means that "foo is a new version of bar".
So this patch refactors the code to use this "rule".
_alpm_sync_sysupgrade now does the following for each local package [bar]
(pseudo-code):
for db in syncdbs {
if(db contains bar) {check if db/bar is an upgrade; break;}
replacers = find(bar replacers in db);
if(replacers!=NULL) {ask_user; break;}
}
Note:
1. Replacers are grouped per repo. If more than one package replace bar in
a repo, all of them are considered ("package set of bar replacers").
2. If repo1/foo1 and repo2/foo2 both replaces bar, only repo1/foo1 is
considered (if repo1 stands before repo2 in pacman.conf). FS#11737 is fixed.
3. It can happen that pacman doesn't consider any replacer, if it found a
literal "earlier", so sync132.py modified accordingly (btw, that situation
should not appear irl).
The new sysupgrade code doesn't use sync_newversion(), so I removed the
"local is newer than repo" message, which was annoying with -Qu and
SyncFirst.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add an initial pactest/test/.gitignore to exclude sync200.py
that is generated from sync200.py.in
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes a bug introduced by my previous changes which changes the
behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable
packages from the transaction. The bug is that the target-list was no
longer being consulted first to resolve dependencies, which means that if
two packages in the sync database satisfied a dependency, and the user
explicitly requested one of those two packages in the sync, the other
package was still being pulled in.
A new test was added, sync993.py, to verify the desired behavior.
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages,
except for packages explicitly listed for sync by the user. This
eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is
used.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Enabled a new prompt to ask the user if they'd like to remove
unresolvable packages from the transaction rather than failing it.
Many pactest tests that used to fail now return success codes, because
pacman now issues a prompt allowing the user to cancel rather than
failing many transactions, and the pactest scripts always choose to
cancel with no error rather than failing. The only net effect is that
the return status of pacman is now 0 in cases where it used to be
nonzero.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
When we do our sed edits, we really don't need every command printed out to
the terminal. Now with "make -s", the output is quite palatable.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Do the checks in the tests that need it, and get rid of some of the
cluttered output when it is not available (one line per test run).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was a stupid and unimportant regression caused by commit
4476598e4e128f4595d5383ecb51a9576a447b5b .
When libdownload is not available, a xfercommand is needed for this pactest
to run properly.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff
of scripts/Makefile.am, which replaces predefined expressions in
NAME.py.in pactests with configure variables.
This can be used to write pactests which consider compile time options.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
[Dan: autotools are tough, make a few adjustments for correctness]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes the fileconflict004.py test complete.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will enable us to mark tests we know currently fail to differentiate
them from those that we know should pass. Regressions should be easier to
spot this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thread: http://www.archlinux.org/pipermail/pacman-dev/2008-July/012465.html
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a group removal test.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also remove some meaningless pactests (broken requiredby, requiredby*.py
tests). requiredby001.py was renamed to upgrade076.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I divided resolvedeps into 2 functions. The new _alpm_resolvedep function
will resolve one dependency, for example the 'foo>=1.0-1' dependency. It
can be useful in sync_addtarget refactoring.
The resolvedeps parameters were changed, to be coherent with recursedeps:
* the target-list is an alpm_list* instead of alpm_list**. This is OK,
because alpm_list_add == alpm_list_add_last
* syncpkg param was removed. list contains the to-be-installed packages,
resolvedeps will add the required dependencies into this list
* trans param was removed, it was used in QUESTION() only, which can be used
on the main (handle->trans) transaction only (because the front-end cannot
access our pseudo-transactions at all!).
The patch fixes some wrong dynamic pmdepmissing_t usage.
I did a behavior change (and sync1003.py was modified accordingly), which
needs some explanation: The old resolvedeps didn't elect packages from
'remove' list. I've dropped this because I don't want that 2nd excluding
list param. In fact, in real life, we ~never need this rule. Resolvedeps is
called before checkconflicts, so only -Su's %REPLACES% packages are sitting
in 'remove' list. This means, that we have the replacement packages in our
target list. Usually "foo replaces bar" means, that bar isn't in our repos
any more, so resolvedeps *cannot* elect it; but usually it won't try it at
all, because foo is in the target list, and it is expected to satisfy
'bar>=1.0-1'-like dependencies too. Since checkdeps and checkconflicts is
done after resolvedeps, this cannot cause any harm.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 84283672853350a84d2a71b72dc06e180cad1587 introduced the regression,
and a previous commit introduced the vercmptest.sh test script to track down
these issues. This commit solves the problem by removing the previous
attempt at locating the pkgrel portions and replacing it with something that
performs the correct logic.
While tracking down everything I needed to, I also found a mistake in one of
the pactests which is fixed here as well as increased the functionality and
verbosity of the vercmptest script to both print out each test it is running
as well as automatically run the mirror of each test case.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds the sync equivalents of upgrade010.py and upgrade070.py.
Both additional test pass.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a test for when removing multilpe packages recursively from a
chain of dependent packages. This situation can occur when removing
installed dependencies with makepkg if a "makedepend" recursively depends on
a "depend" or if redundant dependancies are included.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch offers a way to fix FS#9228.
By putting "SyncFirst = pacman" in pacman.conf, the version check will
happen before the transaction really starts, and before any replacements is
made.
Otherwise, no version check is done.
The sync301 pactest was updated to use this SyncFirst option.
Example session with SyncFirst = pacman, and a newer pacman version
available :
$ pacman -Su (or pacman -S <any targets>)
:: the following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets: pacman-x.y.z-t
Total Download Size: x.xx MB
Total Installed Size: x.xx MB
Proceed with installation? [Y/n] n
As Nagy previously noted, doing this check on any -S operations might look
intrusive, but it can be required.
For example, the case where you want to install a package with versioned
provisions, using a pacman version which didn't support that feature yet
(and there is already a newer pacman in sync db supporting it).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were a bit juryrigged using one call to mkstemp() before rather than
extracting the new files side-by-side and doing our comparisons there. We
were also facing some permissions issues. Instead, make our life easier by
extracting all temp files to a '.paccheck' extension, doing our md5
comparisons, and then taking the correct actions.
Still to be done here- a cleanup of the use of PATH_MAX which should not be
necessary if we use dynamic allocation on the heap.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should allow some future tests to set modes and ensure they are set
after installation. It is also in anticipation of a test for checking
permissions on pacnew files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This update causes query003 to fail before commit
4b8ada818e21aae43b4f54f146ffa215fdb9213e. Hopefully the issue doesn't crop
up again but we might as well test for it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch should avoid duplicated target names in the backend.
1. sync_loadtarget will return with PM_ERR_TRANS_DUP_TARGET when trying to
add a duplicated target
2. sysupgrade never pulls duplicated targets
3. resolvedeps won't pull duplicated targets anymore
A pulled list was introduced in sync_prepare to improve the
pmsyncpkg_t<->pmpkg_t list conversion by making it more direct.
Also replace sync1005 and sync1006 by the sync1008 pactest, which is
similar but more interesting (the provisions are dependencies instead of
explicit targets).
sync1005 didn't work as expected anyway. It was expecting that pacman
failed, and pacman indeed failed, but not for the good reason. It didn't
fail during the preparation step because of conflicting targets, but during
the commit step, because of a md5 error...
And sync1006 didn't pass and was not really worth fixing. We have already
enough failing pactests more important than these two.
sync1008 pass with this patch.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
From the man page :
"This is pretty useless and we're not sure why it even exists."
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Its implementation was quite broken:
* add_loadtarget() might have silently filtered out some targets when
replacing an older version.
* This was used in sync.c to determine whether a target is implicit or not,
which is incorrect behavior. Before this patch we silently removed user
confirmed replacements; now we always warn on a replacement.
* remove001.py behavior was quite odd in adding same target 5 times to the
target list, we can change this behavior to be a failure.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: changed remove001 pactest accordingly]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: rewrote commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This hasn't been updated in forever, and a simple python program could
regenerate it anyway. Or even grep.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is in anticipation of removing the -A/--add option from the pacman
frontend. I've went through each of the pacman pactests that used the -A
operation and decided whether they were worth keeping, whether there was
already an upgrade test doing the same thing, or whether it should be moved
over.
The GIT rename log should make several of the moves obvious, but for those
that were deleted:
add001: handled by upgrade004
add002: worthless
add004: worthless
add010: handled by upgrade011
add050: handled by upgrade010
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_files.c
lib/libalpm/package.c
|
|
If the end of the pB list was reached before the end of pA, we failed to
read any remaining files from the pA list. Add an additional loop to ensure
all entries of pA are added to the return list regardless of whether we have
reached the end of pB.
This new loop also eliminates the now-unnecessary check for a null pB, as we
need to ensure we are excluding directories in the resulting output anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch fixes upgrade040.py and upgrade041.py (041 now fails!):
* the old pactests didn't check the existence of the relocated file
* upgrade041.py was broken due to a typo (missing comma)
New upgrade046.py pactest was added (derived from the fixed upgrade041.py).
This fails because the file relocation check is _hacked_ to conflict.c, and
_alpm_db_find_fileconflicts is not called in case of --force.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
|
|
Add a bunch of guards around function calls like open() and stat() to ensure
we are not going to get ourselves a python error. This made implementing and
testing the new upgrade045 pactest much easier, as its whole purpose was to
create a dead symlink and debug a segfault of pacman (which caused no DB
entries to be written) to support the previously checked in fix for FS#9235
(commit 0c2206f542ce6df2606586d43f190cd5a423fb13). Both of these cases are
now non-fatal in pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
The original patch from Nagy tried to resolve target vs target conflicts,
and so broke the following pactests : sync040, sync041 and sync990
Nagy's proposal to solve this situation was to choose the interactive way,
ask the user how to deal with it: either remove pkg1 or remove pkg2 or stop
here. So he left this as a TODO.
But instead of trying to resolve these conflicts or asking the user, I
tried to find a more conservative way, looking at what the current pactests
expected:
If between the two conflicting packages, one provides the other, pacman
will keep that one and remove the other from the target list. That breaks
sync893 and sync897. But Dan agreed these two looked weird and should be
changed.
This commit should close FS#8897, FS#8899 and FS#9024.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-October/009745.html
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010393.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is the symmetric of --asdeps, install packages explicitly.
Documentation and completion files were updated accordingly.
Added sync301.py and upgrade032.py pactest files to test this.
I also made a little modification in ALLDEPS handling too.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
The deptest code (pacman -T) used by makepkg was mostly in the frontend.
There were 2 drawbacks:
1) the public splitdep function returns a pmdepend_t struct, but the
_alpm_dep_free function for freeing it is private. So there was a memleak.
2) there is a helper in the backend (satisfycmp in deps.c) which makes this
function much easier.
So this adds a new public alpm_deptest in libalpm/deps.c, which cleans
pacman_deptest in pacman/deptest.c a lot.
Besides, alpm_splitdep was made private, because the frontend no longer
requires it, and _alpm_dep_free is also private.
Finally the deptest001 pactest was extended.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also add 3 new pactests to cover both the -U and -S operations for versioned
provisions.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This pactest demonstrates that we should copy the reason between the
to-be-replaced and replaced packages
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
