| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
In the spirit of making libmakepkg more useful as a library, and,
critically, *using* that library for additional pacman scripts, we
should include all of output_format.sh and term_colors.sh directly in
libmakepkg and hopefully stop having to embed additional copies in e.g.
repo-add via m4 macros.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This behavior is confusing, since it means absolutely everything goes to
stderr and makepkg itself is a quiet program that produces no expected
output???
The only situation where messages should go to stderr rather than
stdout, is with --geninteg which is meant to return the checksums on
stdout (but we don't want to totally get rid of status messages when
redirecting the results elsewhere, or, worse, redirect status messages
to a PKGBUILD). For this specific case, redirect message output to
stderr in the --geninteg callers directly.
Implements FS#17173
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
[[ ${array[@]} ]] will resolve to false if array only contains empty
strings. This means that values such as "depends=('')" can be inserted
into a pkgbuild and bypass the linting.
This causes makepkg to successfully build the package while pacman
refuses to install it because of the unmet dependency on ''.
Instead check the length of the array.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pull out the expected=y/n check into a separate function and make use of
the fact we can just prepend the fallback arrays to get the same result.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that we require bash 4.4 this is "more correct" than analyzing the
output of declare -p to see if it compares favorably with -a.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds opt-in lz4 compression of *pkg.tar files with makepkg.
This is nice to have as an option for very fast compression
and is already installed with libarchive.
Signed-off-by: Alex Butler<alexheretic@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 9a4d61622066d5d30c649f1c958b26526a4ceddf debug packages were
merged into one exclusive pkgbase-debug, but the print_all_package_names
function did not get updated to match this logic.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Assuming that everything is a string leads to code which is effectively:
a=
a+=('bar')
This creates an array with 2 elements instead of one. Using proper array
initialization fixes this.
https://lists.archlinux.org/pipermail/pacman-dev/2018-June/022591.html
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Simplifies the function a bit, but mostly, mkdir -p will never fail if
the directory exists, and therefore makepkg never checks to see if it is
actually writable. On the other hand, it's unnecessary to check if the
directory exists once we know mkdir -p succeeded...
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since bash 4.1 extglobs can be used within [[ ... ]] regardless of
whether the shopt is set. Our configure.ac requires bash 4.1.0 at a
minimum for pacman scripts.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
micro-optimization: We only care about temporarily enforcing extglob, so
that is the only one we need to explicitly restore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
depends, provides, conflicts, replaces, and other variables that are
meant to contain package names, are now checked to ensure
1) the name component contains only characters that would equate to
a valid pkgname.
2) the version component contains only characters that would equate
to a valid pkgver.
3) comparison operator is a valid comparison operator (e.g. provides
only allows exact = while optdepends doesn't allow anything)
This also refactors pkgname into a shared utility function, wires up
pkgbase optdepends and provides to use it, and gives pkgver a touchup
to allow referencing where it was called from.
Fixes FS#57833 and a bit of extra.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We use an extended glob here, but were relying on having it globally set
in makepkg. This causes it to fail when used in scripts.
Since scripts using libmakepkg may not want extglob to be set, save and
restore the environment while explicitly setting extglob only where we
need it.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
print_all_package_names used in_opt_array to check whether or not the
PKGBUILD itself has options=('debug' 'split') -- while checking to see
if it was enabled per split package which doesn't make sense as these
options apply globally. This prevented debug packages from being listed
if enabled via makepkg.conf rather than per PKGBUILD.
Instead, use check_option to determine whether makepkg actually thinks
it is meant to try creating a split debug package.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Additionally provide a separate error for failure to create the
directory vs lack of write permissions on a pre-existing directory.
This also means we now consistently try to create any nonexistent *DEST
directories as needed before aborting with E_FS_PERMISSIONS. Previously
only $BUILDDIR received that kindness.
Fixes FS#43537
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently this seems to be only theoretically useful. The most likely
reason for wanting a packagelist is in order to script makepkg and
derive the filenames for the packages we want to install or repo-add,
but in the current implementation this requires a lot of additional
post-processing which must be duplicated in every utility to wrap
makepkg.
- It is of minimal use to know what packages might get created on some
other device utilizing a different CPU/OS architecture, so don't list
them.
- It is non-trivial to reimplement makepkg's logic for sourcing any of
several makepkg.conf configuration files, then applying environment
overrides in order to get the PKGDEST and PKGEXT, so include them
directly in the returned filenames.
- Output is delimited by newlines, for readability. For maximum
parsing reliability, libmakepkg needs to learn how to lint the PKGDEST
and PKGEXT variables to ensure they do not contain newlines, which
will be submitted in a separate patch.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows for more easily extending the list of allowed compression
methods, as it has to be modified in only one place.
Also allow the user to specify their own preferred command + options for
source packages in addition to compiled packages. Currently,
makepkg.conf(5) erroneously claims this is already possible.
|
|
For your convenience, makepkg now has 16 distinct ways to fail.
Also closes FS#54204.
Signed-off-by: Ivy Foster <iff@escondida.tk>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A git repository is marked as signed if it contains the query "signed"
as defined by https://tools.ietf.org/html/rfc3986
Adds two utility functions in util/source.sh.in to extract fragments and
queries, and modifies source/git.sh.in to use them.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
parseopts is used in makepkg and other scripts such as pacman-key as a
getopt replacement.
Instead of including it in those scripts via a macro, move it to
libmakepkg/util/parseopts.sh and have scripts source this file where
appropriate.
To keep the parseopts test, a new variable was introduced:
PM_LIBMAKEPKG_DIR
Signed-off-by: Alad Wenter <alad@archlinux.info>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order for the scripts to be used in testsuites, it is easiest to generate
all of them so they are found in the build directory (which may be different
to the source directory).
Signed-off-by: Alad Wenter <alad@archlinux.info>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
`makepkg -g` looks for existing checksums in the PKGBUILD file, so that
it can generate new sums of the same type. Previously it only checked
variables of the form "sha256sums", and not "sha256sums_x86_64". That
meant it would always fall back to MD5 for packages with only
architecture-specific sources. This change makes it look at
architecture-specific checksums too to determine the type.
Signed-off-by: Jack O'Connor <oconnor663@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This happened to work for the majority of cases because the only calling
function used a variable named "i" that was related to the variable being
passed to the function.
Fixes FS#48340.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extract array detection into its own utility function that ensures
extglob is enabled.
Suggested-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg used to check OPTIONS too, which could override
BUILDENV. Implement a new function that handles these
options more like OPTIONS.
This also reduces code duplication a bit.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed
command on build.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These functions group in with other functions that extract PKGBUILD
information.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Also rename some functions for clarity:
funcgrep -> grep_function
extract_global_var -> extract_global_variable
extract_function_var -> extract_function_variable
pkgbuild_get_attribute -> get_pkgbuild_attribute
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This performs all the needed work for libmakepkg to be included in
tarballs, installed into the correct place, and read into makepkg.
Also change the install root for libmakepkg to an architecture independant
location.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
