summaryrefslogtreecommitdiffstats
path: root/scripts/libmakepkg/util
AgeCommit message (Collapse)AuthorFilesLines
2018-04-29libmakepkg/lint_pkgbuild: lint depends/etc. as if they are pkgnameEli Schwartz1-0/+27
depends, provides, conflicts, replaces, and other variables that are meant to contain package names, are now checked to ensure 1) the name component contains only characters that would equate to a valid pkgname. 2) the version component contains only characters that would equate to a valid pkgver. 3) comparison operator is a valid comparison operator (e.g. provides only allows exact = while optdepends doesn't allow anything) This also refactors pkgname into a shared utility function, wires up pkgbase optdepends and provides to use it, and gives pkgver a touchup to allow referencing where it was called from. Fixes FS#57833 and a bit of extra. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/util/pkgbuild.sh: fix missing extglobEli Schwartz1-0/+6
We use an extended glob here, but were relying on having it globally set in makepkg. This causes it to fail when used in scripts. Since scripts using libmakepkg may not want extglob to be set, save and restore the environment while explicitly setting extglob only where we need it. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-18makepkg --packagelist: fix listing debug packages with makepkg.confEli Schwartz1-2/+1
print_all_package_names used in_opt_array to check whether or not the PKGBUILD itself has options=('debug' 'split') -- while checking to see if it was enabled per split package which doesn't make sense as these options apply globally. This prevented debug packages from being listed if enabled via makepkg.conf rather than per PKGBUILD. Instead, use check_option to determine whether makepkg actually thinks it is meant to try creating a split debug package. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg: refactor checking for write permissions into a utility functionEli Schwartz1-0/+17
Additionally provide a separate error for failure to create the directory vs lack of write permissions on a pre-existing directory. This also means we now consistently try to create any nonexistent *DEST directories as needed before aborting with E_FS_PERMISSIONS. Previously only $BUILDDIR received that kindness. Fixes FS#43537 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Update coyrights for 2018Allan McRae8-8/+8
make update-copyright OLD=2017 NEW=201 Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg --packagelist: just list the built package files we will buildEli Schwartz1-7/+5
Currently this seems to be only theoretically useful. The most likely reason for wanting a packagelist is in order to script makepkg and derive the filenames for the packages we want to install or repo-add, but in the current implementation this requires a lot of additional post-processing which must be duplicated in every utility to wrap makepkg. - It is of minimal use to know what packages might get created on some other device utilizing a different CPU/OS architecture, so don't list them. - It is non-trivial to reimplement makepkg's logic for sourcing any of several makepkg.conf configuration files, then applying environment overrides in order to get the PKGDEST and PKGEXT, so include them directly in the returned filenames. - Output is delimited by newlines, for readability. For maximum parsing reliability, libmakepkg needs to learn how to lint the PKGDEST and PKGEXT variables to ensure they do not contain newlines, which will be submitted in a separate patch. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: refactor archive compression for reusabilityEli Schwartz1-0/+47
This allows for more easily extending the list of allowed compression methods, as it has to be modified in only one place. Also allow the user to specify their own preferred command + options for source packages in addition to compiled packages. Currently, makepkg.conf(5) erroneously claims this is already possible.
2017-12-07makepkg: implement error codesIvy Foster1-0/+41
For your convenience, makepkg now has 16 distinct ways to fail. Also closes FS#54204. Signed-off-by: Ivy Foster <iff@escondida.tk> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-04makepkg: Verify git signaturesEli Schwartz1-0/+27
A git repository is marked as signed if it contains the query "signed" as defined by https://tools.ietf.org/html/rfc3986 Adds two utility functions in util/source.sh.in to extract fragments and queries, and modifies source/git.sh.in to use them. Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-04Update copyright yearsAllan McRae6-6/+6
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22makepkg: Move parseopts from library to libmakepkgAlad Wenter1-0/+173
parseopts is used in makepkg and other scripts such as pacman-key as a getopt replacement. Instead of including it in those scripts via a macro, move it to libmakepkg/util/parseopts.sh and have scripts source this file where appropriate. To keep the parseopts test, a new variable was introduced: PM_LIBMAKEPKG_DIR Signed-off-by: Alad Wenter <alad@archlinux.info> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22libmakepkg: generate all scriptsAlad Wenter3-0/+0
In order for the scripts to be used in testsuites, it is easiest to generate all of them so they are found in the build directory (which may be different to the source directory). Signed-off-by: Alad Wenter <alad@archlinux.info> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-30libmakepkg: look for architecture-specific hashes in get_integlistJack O'Connor1-0/+11
`makepkg -g` looks for existing checksums in the PKGBUILD file, so that it can generate new sums of the same type. Previously it only checked variables of the form "sha256sums", and not "sha256sums_x86_64". That meant it would always fall back to MD5 for packages with only architecture-specific sources. This change makes it look at architecture-specific checksums too to determine the type. Signed-off-by: Jack O'Connor <oconnor663@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18libmakepkg: extract functions for integrity checkingAshley Whetter1-1/+19
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26libmakepkg: fix is_array functionAllan McRae1-1/+1
This happened to work for the majority of cases because the only calling function used a variable named "i" that was related to the variable being passed to the function. Fixes FS#48340. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20libmakepkg: increase robustness of the detection of array variablesAllan McRae1-0/+17
Extract array detection into its own utility function that ensures extglob is enabled. Suggested-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Update copyright years for 2016Allan McRae5-5/+5
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19libmakepkg: Add check_buildoption for distcc and ccacheJan Alexander Steffens (heftig)1-0/+34
makepkg used to check OPTIONS too, which could override BUILDENV. Implement a new function that handles these options more like OPTIONS. This also reduces code duplication a bit. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: util/pkgbuild.sh needs processing on buildAllan McRae1-0/+0
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed command on build. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20libmakepkg: move color settings to functionAllan McRae1-0/+20
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract functions for handling source URLsAllan McRae1-0/+144
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: fix test styleAllan McRae2-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: move more functions for extracting information from PKGBIULDsAllan McRae1-1/+46
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract more utility functionsAllan McRae1-1/+31
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract get_full_version and get_pkg_archAllan McRae1-0/+35
These functions group in with other functions that extract PKGBUILD information. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract in_arrayAllan McRae1-0/+38
2015-05-16libmakepkg: move functions for extracting pkgbuild attributesAllan McRae1-0/+111
Also rename some functions for clarity: funcgrep -> grep_function extract_global_var -> extract_global_variable extract_function_var -> extract_function_variable pkgbuild_get_attribute -> get_pkgbuild_attribute Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split PKGBUILD/makepkg.conf option checking to libmakepkgAllan McRae1-0/+108
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split message functions into libmakepkgAllan McRae1-0/+49
This performs all the needed work for libmakepkg to be included in tarballs, installed into the correct place, and read into makepkg. Also change the install root for libmakepkg to an architecture independant location. Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-19 18:04:11 +0100