summaryrefslogtreecommitdiffstats
path: root/scripts/libmakepkg
AgeCommit message (Collapse)AuthorFilesLines
2018-09-19makepkg: lint_pkgver: Run even if PKGVERFUNCLuke Shumaker1-5/+0
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver() will change the value of pkgver anyway, and there's no point in linting the old value. update_pkgver() will call check_pkgver() itself to validate the new value. However, that "optimization" only holds if we're definitely going to call update_pkgver() later; and that's way more complicated than if (( PKGVERFUNC )); then it's more like: if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then Which is to say: If I have a PKGBUILD with pkgver(): * if I run `makepkg -g` I expect it to lint pkgver, but it won't * if I run `makepkg -R` I expect it to lint pkgver, but it won't * ... So let's fix that. Rather than try to keep a huge list of conditions in sync with the flow of makepkg.sh.in, let's just drop it. As far as I can tell, the only thing that skipping lint_pkgver() really enables is letting the PKGBUILD author write `pkgver=` in the initial version, and letting pkgver() fill it in. They can just start writing `pkgver=0` for that workflow. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: reject PKGBUILDs with both split and non-split package functionsEli Schwartz1-1/+8
We accept package_foo() in non-split packages, because it's easier to switch to/from a split package just by removing a pkgname element. But it makes no sense to have both in one PKGBUILD. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19libmakepkg/lint_config: fix lint_variable actually running the PKGBUILD lintEli Schwartz1-2/+2
Due to a copy-paste error when initially implementing this, it actually uses a duplicate function name, usually resulting in lint_pkgbuild overwriting the function definition. Then the PKGBUILD lint gets run twice, one time before the PKGBUILD is even sourced -- to potentially surprising results, like erroring out on a pre-existing shell definition that doesn't match our expectations. Seen in the wild with lint_config triggering an error for 'declare -x arch="foo"' Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts: Remove trailing semicolonsJan Alexander Steffens (heftig)2-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util/option: Refactor checking to reduce code duplicationJan Alexander Steffens (heftig)1-53/+24
Pull out the expected=y/n check into a separate function and make use of the fact we can just prepend the fallback arrays to get the same result. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util: use parameter transformation when checking variable typeEli Schwartz1-1/+1
Now that we require bash 4.4 this is "more correct" than analyzing the output of declare -p to see if it compares favorably with -a. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: when signing packages, report package filename on failureEli Schwartz1-1/+1
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function was moved out of fakeroot, and thus out of the create_package loop. This meant that if package signing failed, it was no longer possible to tell which package it failed on by checking which package creation is currently running. Successful signing attempts do not have this problem as we already printed the name of the signature file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg: add pkgbase to linted variablesmorganamilo1-1/+1
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10Add lz4 compression support to makepkgAlex Butler1-0/+1
Adds opt-in lz4 compression of *pkg.tar files with makepkg. This is nice to have as an option for very fast compression and is already installed with libarchive. Signed-off-by: Alex Butler<alexheretic@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg: reduce strictness of pkgver in depends lintingEli Schwartz1-1/+2
This change was introduced to prevent entries like depends=('foo>'). However, it had the unintended side effect of causing a number of working PKGBUILDs to fail to build. This happened when a PKGBUILD defined one variable through calling a "complex" statement within the PKGBUILD's package function (e.g. a function or evaluating in a subshell), then used it to define the package metadata variable. extract_function_variable() cannot execute the package function in order to retrieve this information, so it performs a simple grep + eval instead and in the process misses the contextual awareness of running within the package function. While not catching these "issues" can result in incorrect SRCINFO, the resulting packages are fine. Stop aborting on the common case where the pkgver of a dependency is dynamically set during the package function until the large number of broken PKGBUILDs are fixed, and the restrictions of the PKGBUILD format are documented. "Fixes" FS#58776 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19libmakepkg: remove accidentally added fileAllan McRae1-0/+0
A blank file slipped into libmakepkg in commit 2c94118d. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19libmakepkg/tidy: fix debug sources not being properly detected sometimesEli Schwartz1-1/+1
DW_AT_comp_dir is meant to contain the directory in which the compiler was run DW_AT_name contains the source file the compiler was told to use. In the event that DW_AT_name is an absolute path, it is (obviously) not meant to be computed relative to DW_AT_comp_dir. However, we did not handle this correctly, and as a result tried to copy source files using doubled-up filepaths. The correct approach should be to use DW_AT_name on its own, in the event that it is an absolute path. See http://wiki.dwarfstd.org/index.php?title=Best_Practices. This fixes debug package generation for many packages that use absolute paths in their build systems... like CMake. Reported-by: Jagannathan Tiruvallur Eachambadi <jagannathante@gmail.com> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: don't print per-pkgname debug packagesEli Schwartz1-3/+4
In commit 9a4d61622066d5d30c649f1c958b26526a4ceddf debug packages were merged into one exclusive pkgbase-debug, but the print_all_package_names function did not get updated to match this logic. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18Fix signing of debug packagesAllan McRae1-1/+1
Commit 9c8d7a80 broke the signing of debug packages by merging code up but not changing the test condition. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: fix initialization when extracting arraysDave Reisner1-1/+5
Assuming that everything is a string leads to code which is effectively: a= a+=('bar') This creates an array with 2 elements instead of one. Using proper array initialization fixes this. https://lists.archlinux.org/pipermail/pacman-dev/2018-June/022591.html Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18Add missing sha224 sums in man page and lintingmorganamilo1-1/+2
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg/lint_pkgbuild: squelch syntax error when a pkgname is emptyEli Schwartz1-2/+1
We fail with an error, but then we also fail with: ==> ERROR: depends is not allowed to be empty. /usr/share/makepkg/lint_pkgbuild/pkgname.sh: line 39: continue: only meaningful in a `for', `while', or `until' loop During the refactor to provide enhanced pkgname=pkgver linting, this was moved out of the ${pkgname[@]} loop to a distinct function, at which time it should have been modified to return rather than continue. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg/lint_pkgbuild: permit versioned optdependsEli Schwartz1-5/+13
pacman accepts these, and there is no good reason to be more restrictive ourselves; we should follow the example of "depends" here. Update the documentation to actually state that this is supported. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg: when checking for write permissions, handle pre-existing dirsEli Schwartz1-5/+5
Simplifies the function a bit, but mostly, mkdir -p will never fail if the directory exists, and therefore makepkg never checks to see if it is actually writable. On the other hand, it's unnecessary to check if the directory exists once we know mkdir -p succeeded... Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: Support file 5.33's application/x-pie-executableJan Alexander Steffens (heftig)1-0/+2
file 5.33 introduces a new MIME type "application/x-pie-executable", which is used for relocatable binaries. makepkg ignored these binaries and did not attempt to strip them. Handle the new MIME type like the old "application/x-sharedlib". Stripping the binaries with --strip-unneeded to keep relocation information should be the correct thing to do. file 5.33 also misidentifies actual libraries as PIE executables, so we didn't strip any shared libraries, either. We now work around this bug. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12util/pkgbuild: fix broken indentationAndrew Gregory1-8/+8
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg/integrity: determine what is a signature preferring local filenameEli Schwartz1-1/+1
Checking the file extension to determine if something is a signature is currently done in three places: - verify_file_signature: uses $file to print status, reuses it for comparison - source_has_signatures: uses $netfile, but removes url component if filename component exists - generate_one_checksum: uses $netfile and fails to detect renamed files This leads to inconsistent behavior when trying to use a signature of the form "foo-1.0.tar.gz.asc::https://example.com/foo-1.0.tar.gz.pgp" Fix this by treating the third case like the second case. Reported-by: Giancarlo Razzolini <grazzolini@archlinux.org> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: don't save/set/restore extglob in bash [[ testsEli Schwartz1-5/+0
Since bash 4.1 extglobs can be used within [[ ... ]] regardless of whether the shopt is set. Our configure.ac requires bash 4.1.0 at a minimum for pacman scripts. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: only save the shellopts we needEli Schwartz6-12/+12
micro-optimization: We only care about temporarily enforcing extglob, so that is the only one we need to explicitly restore. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg/lint_pkgbuild: fix regression in linting ↵Eli Schwartz6-11/+27
depends=(foo=$epoch:$pkgver-$pkgrel) In commit 91b72cc386ca03241791748da5da2b150c724ace support was added for linting depends/etc. to ensure they contain only valid dependency specifiers. However it did not properly take into account the possibility of dependencies linked to a specific pkgrel or epoch, which promptly failed to build because "-" and ":" is not allowed in a pkgver. pkgrel is something supported by pacman and useful for e.g. split packages which cannot be mismatched even if the pkgver is the same. Fix by removing an optional suffixed "-$decimal" when checking for a valid pkgver. epoch is kind of difficult to do without :D so likewise fix by removing an optional prefixed "$integer:" Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12remove unneeded break argument from option parsingRafael Ascensão1-1/+1
Some scripts are using `break 2` to break out of the option parsing loop. Since a single `break` is sufficient in these cases, remove the extra argument. Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/lint_pkgbuild: lint depends/etc. as if they are pkgnameEli Schwartz10-82/+308
depends, provides, conflicts, replaces, and other variables that are meant to contain package names, are now checked to ensure 1) the name component contains only characters that would equate to a valid pkgname. 2) the version component contains only characters that would equate to a valid pkgver. 3) comparison operator is a valid comparison operator (e.g. provides only allows exact = while optdepends doesn't allow anything) This also refactors pkgname into a shared utility function, wires up pkgbase optdepends and provides to use it, and gives pkgver a touchup to allow referencing where it was called from. Fixes FS#57833 and a bit of extra. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/util/pkgbuild.sh: fix missing extglobEli Schwartz1-0/+6
We use an extended glob here, but were relying on having it globally set in makepkg. This causes it to fail when used in scripts. Since scripts using libmakepkg may not want extglob to be set, save and restore the environment while explicitly setting extglob only where we need it. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-18makepkg --packagelist: fix listing debug packages with makepkg.confEli Schwartz1-2/+1
print_all_package_names used in_opt_array to check whether or not the PKGBUILD itself has options=('debug' 'split') -- while checking to see if it was enabled per split package which doesn't make sense as these options apply globally. This prevented debug packages from being listed if enabled via makepkg.conf rather than per PKGBUILD. Instead, use check_option to determine whether makepkg actually thinks it is meant to try creating a split debug package. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15libmakepkg: Add basic rules to lint makepkg.conf variablesEli Schwartz3-0/+156
Currently the only things we check are: - Things that should be arrays, are not strings, and vice versa (this was mostly copy-pasted from the similar code in lint_pkgbuild). - Variables that are meant to contain pathname components cannot contain a newline character, because newline characters in pathnames are weird and also don't play well with future changes intended for the --packagelist option. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15libmakepkg/integrity: fix regression that broke --installEli Schwartz1-13/+10
In commit c6b04c04653ba9933fe978829148312e412a9ea7 package signing was moved out of fakeroot, and as part of this process, the global pkgname variable was modified in order to extract the built package names. However, if a debug package was not available and added to the list of packages, the function was aborted early, before the pkgname array was restored, thereby corrupting the later stages of makepkg and specifically the install_package function which needs to know which pkgnames to install. Fix this by inlining the debug package signing inside the `if` check, and as added security switch to using `for pkg in "${pkgname[@]}"` as is done in many other parts of makepkg, since package signing does not depend on the value of pkgname for anything. Additionally, since debug packages may not actually exist, check if the package file exists first. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15makepkg: avoid false "Signing package(s)" msg when signing is disabledEli Schwartz1-3/+3
Followup on c6b04c04653ba9933fe978829148312e412a9ea7 which refactored the signing function to run outside of fakeroot, and in the process moved the status message to outside the $SIGNPKG check. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg: refactor checking for write permissions into a utility functionEli Schwartz1-0/+17
Additionally provide a separate error for failure to create the directory vs lack of write permissions on a pre-existing directory. This also means we now consistently try to create any nonexistent *DEST directories as needed before aborting with E_FS_PERMISSIONS. Previously only $BUILDDIR received that kindness. Fixes FS#43537 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Update coyrights for 2018Allan McRae53-53/+53
make update-copyright OLD=2017 NEW=201 Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Fix linting of whitespace in pkgverRikard Falkeborn1-1/+1
In order to detect if pkgver contains whitespace, we need to quote it. Previously, only the characters up to the first whitespace was checked. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg --packagelist: just list the built package files we will buildEli Schwartz1-7/+5
Currently this seems to be only theoretically useful. The most likely reason for wanting a packagelist is in order to script makepkg and derive the filenames for the packages we want to install or repo-add, but in the current implementation this requires a lot of additional post-processing which must be duplicated in every utility to wrap makepkg. - It is of minimal use to know what packages might get created on some other device utilizing a different CPU/OS architecture, so don't list them. - It is non-trivial to reimplement makepkg's logic for sourcing any of several makepkg.conf configuration files, then applying environment overrides in order to get the PKGDEST and PKGEXT, so include them directly in the returned filenames. - Output is delimited by newlines, for readability. For maximum parsing reliability, libmakepkg needs to learn how to lint the PKGDEST and PKGEXT variables to ensure they do not contain newlines, which will be submitted in a separate patch. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-10Fix moving source files into debug packagesAllan McRae1-4/+5
Commit 8bec63bf92d8dd028aa88dbd5109c314cdb9ebea attempted to switch to using -fdebug-prefix-map to set file locations in debug packages. It make a few mistakes... 1) Adding debug C{,XX}FLAGS only worked if DBGSRCDIR was defined in makepkg.conf. Fix this by falling back to the default value. 2) Using -fdebug-prefix-map altered a lot of assumptions about file locations when copying source files into debug packages. This resulted in lots of messages of failed cp in packaging output. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-06libmakepkg/integrity: fix git signatures not seen with multiple filesEli Schwartz1-4/+4
In eaa82b4d0775252856a4e54a6f2a9ea191cf0b8f source_has_signature() was modified to check if git repositories are marked as signed. However, due to a typo the unused variable $netfile was checked. This worked as long as the last source element was marked as signed, due to $netfile being mistakenly set as a global in check_vcs_software(), but usually failed with multiple sources. Break this more consistently by properly declaring $netfile as a local variable in check_vcs_software() which it should be regardless. Fix it again by completely moving over to $netfile in source_has_signature() as netfile is more descriptive of the current state. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-06libmakepkg/integrity: fix regression that broke invalid file sigsEli Schwartz1-0/+2
In 42e7020281d3ae260e1e9693495f527b7f476625 creating the gpg statusfile for a source file was split into a separate function, which used the return code to indicate unsigned files and proto-specific errors. However, the fallback return code was set by the final gpg invocation, which would be 1 if the signature was somehow broken (for example, the key was not available in the gpg keyring). As a result makepkg thought that file did not have a signature and skipped over it rather than erroring out. Fix this by explicitly setting the return code for all verify_*_signature() functions. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: tell the compiler to record debugging info for debug packagesEli Schwartz1-5/+2
In commit 8b0d59b83a60eb504567590346119fe4cd891cad support was added for storing the source files of binaries in debug packages. This made use of the debugedit program which is part of the RPM package manager, which is not very standalone. The same effect can be achieved using -fdebug-prefix-map, an option accepted by both the gcc and clang compilers which modifies how the compiler itself stores the references to the source files rather than requiring us to later edit the produced binaries. This also removes the dependency on external programs like debugedit. As a result of this change, source files will only be effectively added for programs which actually use the exported CFLAGS. This is a reasonable tradeoff as we expect our CFLAGS to be used rather than ignored. Upstream software which do not produce useful debug packages are expected to fix their build systems to respect the environment CFLAGS. As a result of this change, the routine for extracting source filenames from binaries had to be modified to derive the source file from the final debug location, rather than the other way around. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: Add a config option to specify the location of debug sourcesEli Schwartz1-1/+1
In commit 8b0d59b83a60eb504567590346119fe4cd891cad support was added for storing the source files of binaries in debug packages. Allow the user to specify where those source files should be stored via makepkg.conf Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: refactor archive compression for reusabilityEli Schwartz1-0/+47
This allows for more easily extending the list of allowed compression methods, as it has to be modified in only one place. Also allow the user to specify their own preferred command + options for source packages in addition to compiled packages. Currently, makepkg.conf(5) erroneously claims this is already possible.
2017-12-07libmakepkg: fix .gitignore to simply ignore all generated .sh filesEli Schwartz1-17/+1
Prior to commit aca153bfa6b1bcd828f0b35db453bb9fea6a08bf some .sh files were not generated and simply included directly, and it was necessary to explicitly iterate all ignored files to prevent git from ignoring the directly-included files. However, now all .sh files are in fact generated so it makes no sense to list each one separately in the .gitignore file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: implement error codesIvy Foster1-0/+41
For your convenience, makepkg now has 16 distinct ways to fail. Also closes FS#54204. Signed-off-by: Ivy Foster <iff@escondida.tk> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-10-17libmakepkg: only output package file names when checking for build referencesAllan McRae1-1/+1
The leading directory is distraction from identifying the files containing build references. Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-14libmakepkg: grammar fixAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-13libmakepkg: check for invalid tags in gitEli Schwartz1-1/+10
As per https://lists.archlinux.org/pipermail/arch-general/2017-July/043876.html git doesn't check that the tag name matches what an annotated tag object *thinks* it should be called. This is a bit of a theoretical attack and some would argue that we should always use commits since upstream can legitimately change a tag, but nevertheless this can result in a downgrade attack if the git download transport was manipulated or the upstream repository hacked. So, check the tag blob to make sure the tag actually matches the name we used for `git checkout`. This really should be fixed in git itself, rather than forcing all downstream users of git verify-tag to implement their own checks, but the git developers disagree, see the discussion surrounding https://public-inbox.org/git/xmqqk2hzldx8.fsf@gitster.mtv.corp.google.com/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg: Fix improperly spelled local variable declarationEli Schwartz1-1/+1
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg/integrity: Fix error message not sent to stderrEli Schwartz1-1/+1
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg: fix unsanitized source filenamesEli Schwartz1-2/+2
There were a couple places where filenames beginning with "-" were not properly guarded against by passing them after "--". Some PKGBUILD authors are crazy, but we still take those into account. Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>