summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2016-08-30Fix file name in scripts potfileAllan McRae1-5/+5
2016-08-30libmakepkg: look for architecture-specific hashes in get_integlistJack O'Connor1-0/+11
`makepkg -g` looks for existing checksums in the PKGBUILD file, so that it can generate new sums of the same type. Previously it only checked variables of the form "sha256sums", and not "sha256sums_x86_64". That meant it would always fall back to MD5 for packages with only architecture-specific sources. This change makes it look at architecture-specific checksums too to determine the type. Signed-off-by: Jack O'Connor <oconnor663@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-30pacman-key: reject armored signaturesAllan McRae1-0/+4
pacman expects an unarmored signature. makepkg forces the generation of unarmored signatures, and repo-add will reject any armored signature. For consistency pacman-key should also reject armored signatures. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18libmakepkg: extract functions for integrity checkingAshley Whetter10-429/+579
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18Use a more generic regexp when parsing output of gpg(1) in signature ↵Leonid Isaev1-1/+1
verification. The current way of extracting key trust from output of gpg --verify is not very robust against changes in the format of said output. As a result, pacman-key can return an error even if the signature is actuall good. This change relaxes the regexp when parsing output of gpg. Signed-off-by: Leonid Isaev <leonid.isaev@jila.colorado.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18makepkg: ignore the architecture for --printsrcinfoAlastair Hughes1-1/+1
Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18makepkg: move build enviroment set-up to functionAllan McRae1-36/+43
This is a requirement to split the preparation of the build environment into libmakepkg, which will allow dropping in extensions (e.g. to allow PGO). After this patch, disabling buildflags or makeflags and enabling debug CFLAGS will only effect the build(), check() and package() functions. The relevant variables are no longer exported for the prepare() function. This should have zero impact for the prepare() function of a properly written PKGBUILD, as no building/linking is done there... Signed-off-by: Allan McRae <allan@archlinux.org>
2016-03-28libmakepkg: extract functions for writing .SRCINFO filesAshley Whetter4-101/+129
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-03-21libmakepkg: ensure emptydir find command acts on individual directoriesAllan McRae1-1/+2
Using "-exec command {} +" systax exits on any error. Such errors occur when running rmdir on a non-empty directory. Switch to "{} ;" syntax instead which avoids exiting before the find command is completed. Fixes FS#48515. Note, we can not use "-empty" in the find command because it is not supported by Busybox find, and the "--ignore-fail-on-non-empty" flag for rmdir is not available on BSD rmdir variants. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26repo-add: do not alter the database if only verifying signatureAllan McRae1-0/+11
Fixes FS#48085. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26makepkg: Turn PACMAN_OPTS into an arrayXyne1-5/+5
Avoid potential word expansion with future inclusions Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26makepkg: Remove upx and optipng supportAllan McRae5-110/+0
These options were added before libmakepkg allowed passes like this to be dropped in. I prefer only real core packaging tasks to be included in makepkg and additional things like this to be dropped in by a user or distribution that wants to support them. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26libmakepkg: fix is_array functionAllan McRae1-1/+1
This happened to work for the majority of cases because the only calling function used a variable named "i" that was related to the variable being passed to the function. Fixes FS#48340. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-23Regenerate translations for 5.0.1Allan McRae42-9318/+12487
2016-02-23Pull translation updates from TransifexAllan McRae45-7497/+4402
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-23makepkg: do not run prepare() with --noextractEvangelos Foutras1-3/+3
This is partial revert of 8454daa7feef (makepkg: run pkgver() and prepare() with --noextract). Reasoning for the reversion (copied from FS#43498): Running prepare() when --noextract is used no longer allows running 'makepkg -o && makepkg -e' with any PKGBUILD that applies patches in prepare(). [1] Sure there's --noprepare which restores the old behavior, but that's a lot of extra typing for what I believe is a much more common use of --noextract. For OP's use case of doing git bisects, you can specify the commit in the source array and thus skip --noextract since makepkg will checkout the correct commit each time. [1] I often extract the sources using 'makepkg -o', manually edit some source files, and then use 'makepkg -e' to package it (while possibly repeating the edit/package steps). Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-21only include .SRCINFO comments in source tarballDominik Fischer1-4/+11
This avoids introducing unnecessary changes to the time stamp into package repositories that regularly use --printsrcinfo to update the .SRCINFO file. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20makepkg: remove pkg from OPT_LONG arrayAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20Revert "makepkg: Empty/create only $pkgdir's relevant to current PKGBUILD"Allan McRae1-5/+2
This reverts commit f9423cfa5d5b9f2041b70676438082faad1cd1ee. This created issue when building packages with debug info multiple times. It could be fixed, but it confirmed my initial opinion that keeping other directories in $pkgdirbase was wrong. Use different BUILDDIRs if you want to build different things from a single PKGBUILD.
2016-02-20Make "makepkg -g" ignore the current architecture.Alastair Hughes1-1/+2
Commit 663c74150ab4ba6d3adc55b0e3f539557a16e352 (makepkg: merge arch dependent variables after PKGBUILD linting) broke "makepkg -g" on a PKGBUILD which did not include the current architecture, by moving the lint_pkgbuild call before GENINTEG was processed. Fix that by setting IGNOREARCH for the "-g" option. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20libmakepkg: increase robustness of the detection of array variablesAllan McRae2-3/+20
Extract array detection into its own utility function that ensures extglob is enabled. Suggested-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20repo-remove: fix checking for non-existent .db databaseAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-30Update translationsAllan McRae47-1030/+2578
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-25makepkg: do not run prepare() and pkgver() with --repackageAllan McRae1-19/+21
Bug introduced with commit 8454daa7. Reported-by: Zuyi Hu <hzy068808@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-25Fix testing of arrays status for arch specific variablesZuyi Hu1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-17Pull translations updates from TransifexAllan McRae45-5376/+4361
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Update copyright years for 2016Allan McRae51-57/+57
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: Output full URL in case of download failureFlorian Pritz1-1/+1
Most entries in $sources contain variables so finding out why a URL fails to download is hard because one has to manually replace the variables when looking at the PKGBUILD. Simply output the full URL here so that it can be easily seen what is wrong. Old: ==> ERROR: Failure while downloading example-1.2.4.tar.gz New: ==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz With the new format it is much more obvious that the directory name is the culprint (1.1 vs 1.2) while the old one would not display that information. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: run pkgver() and prepare() with --noextractAllan McRae1-8/+9
Modifications made to the source before running with --noextract may alter the version string returned by pkgver(). Always run this function if present and check build status before proceeding. Fixes FS#46800. Also run prepare() when --noextract is used (unless --noprepare is specified). Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-09Pull translations from Transifex and prepare for next releaseAllan McRae46-20992/+31932
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: record build information in .BUILDINFOAllan McRae1-14/+19
This information can be used to reproduce build conditions, which can then be used to determine if a package builds reproducibly. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: add whirlpool to the list of hashing algorithmsLuke1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild/variable: increase robustnessAllan McRae1-12/+54
Approach the detection of variables of the wrong type using an approach similar to that used for construction of .SRCINFO files. While doing silly things in bash could still result in false negatives, this approach should be very robust to generatinf false positives results. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: merge arch dependent variables after PKGBUILD lintingAllan McRae1-8/+8
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: remove obsolete commentAllan McRae1-1/+0
Behaviour changed in commit dce82f9d. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild: explicitly return valueAllan McRae5-4/+12
Set the return value to be local and always explictly returns it. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-05Refactor lint_source to work with earlier versions of BashAaron Campbell1-1/+1
Negative subscripts to indexed arrays are not supported before 4.2. However, since substring expansion works on arrays, we can specify an offset of -1 to be taken relative to one greater than the maximum index of the specified array (see Parameter Expansion section of the bash man page). This works with both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman. Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28scripts/po: fix translated file nameAllan McRae1-1/+1
This file was renamed during review and its entry in POTFILES.in was not updated. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28makepkg: fix $pkgname element duplicationBenjamin Yates1-2/+2
run_split_packaging did not preserve the $pkgname array correctly, and would create duplicate entries in the list during restore. After restoring the backup (a b c) would become (a b c b c). This probably went unnoticed because during --install, pacman would reconcile the duplicates. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27libmakepkg: fix pkgver checkingAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-22makepkg: Fix hard-coded debug suffixMohammad Alsaleh1-2/+2
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Set CCACHE_BASEDIR to make paths in $srcdir relativeJan Alexander Steffens (heftig)1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Correctly layer distcc and ccacheJan Alexander Steffens (heftig)1-6/+13
ccache expects further compiler wrappers to be specified via CCACHE_PREFIX. Otherwise, ccache will hash the wrapper executable instead of the real one. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19libmakepkg: Add check_buildoption for distcc and ccacheJan Alexander Steffens (heftig)2-4/+38
makepkg used to check OPTIONS too, which could override BUILDENV. Implement a new function that handles these options more like OPTIONS. This also reduces code duplication a bit. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: separate "sourcefile" into two wordsAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19Remove space before ellipsesAllan McRae3-4/+4
Makes all use of ellipses consistent... Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22makepkg: remove ability to build individual packagesAllan McRae1-8/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: remove declaration of unused local variablesAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: return 1 on error in arch arrayAllan McRae1-2/+2
The return value was being assigned when an error was found in a PKGBUILD's arch array but it never was returned. Also remove error message explaining about adding the arch array to a PKGBUILD. That was added a long time ago when the arch array first became compulsory. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: update .gitignoreAllan McRae1-2/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-22 12:19:55 +0100