summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2011-09-30makepkg: support .tar.Z source packages creationlolilolicon1-1/+3
SRCEXT should allow whatever PKGEXT does. Also address an uninitialized use of $ret. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-30pacman-key: remove errexit flag from shebangDave Reisner1-1/+1
We're ill equipped to be using this flag as we don't trap and respond to the ERR signal. The result is that if is ever tripped, pacman-key will instantly exit with no indication of why. At the same time, we're already fairly good about doing our own error checking and verbalizing it before dying. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30pacman-key: return 0 from get_from if default value usedAllan McRae1-1/+4
This prevents the error trap being set off when GPGDir is commented in pacman.conf. Bug introduced in 507b01b9. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28pkgdelta: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the right-hand side of expression when the == or != operator is used, unless intended as a pattern. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28makepkg: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the righthand side of expression when the == or != operator is used, unless intended as a pattern. Quoting bash(1): When the == and != operators are used, the string to the right of the operator is considered a pattern. Any part of the pattern may be quoted to force it to be matched as a string. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-27makepkg: ensure '-' is last in a character globDave Reisner1-1/+2
If '-' isn't the last item, it's interpreted as a range and not literally, causing problematic behavior in parsing optdepends. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27pacman-key: use consistent punctuation in error messagesDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: allow get_from to return a default valueDave Reisner1-2/+4
Keep the non-zero return val to let the caller know that the key wasn't found. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: simplify writing to config fileDave Reisner1-5/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: normalize whitespace for optdepends in .PKGINFOAllan McRae1-1/+1
Many PKGBUILDs use formatting whitespace when specifying optdepends. This is removed when adding a package to a repo-database so the output of "pacman -Si <package>" and "pacman -Qip <package file>" becomes inconsistent. Instead, do the adjustment when creating the .PKGINFO file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: allow versioned optdepends with epochAllan McRae1-2/+2
Allow the specification of versioned optdepends with an epoch. This also (partially) enforces a whitespace between ":" and the description which is required for the future optdepends parsing code. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee28-795/+1951
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee27-715/+890
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: add an additional plain text 'foo-trusted' fileDan McGee1-1/+28
This is similar to the 'foo-revoked' file we had. This will be used to inform the user what keys in the shipped keyring need to be explicitly trusted by the user. A distro such as Arch will likely have 3-4 master keys listed in this trusted file, but an additional 25 developer keys present in the keyring that the user shouldn't have to directly sign. We use this list to prompt the user to sign the keys locally. If the key is already signed locally gpg will print a bit of junk but will continue without pestering the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: factor out validate_with_gpg() methodDan McGee1-16/+14
This was copy-pasted code for the most part once the filename was factored out. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: remove holdkeys functionalityDan McGee1-12/+0
We're putting the cart ahead of the horse a bit here. Given that our keyring is not one where everything is implicitly trusted (ala gpgv), keeping or deleting a key has no bearing on its trusted status, only whether we can actually verify things signed by said key. If we need to address this down the road, we can find a solution that works for the problem at hand rather than trying to solve it now before signing is even widespread. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: implement promptless lsigningDan McGee1-2/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: disable, don't remove, revoked keysDan McGee1-21/+13
Unlike our protégé apt-key, removing a key from our keyring is not sufficient to prevent it from being trusted or used for verification. We are better off flagging it as disabled and leaving it in the keyring so it cannot be reimported or fetched at a later date from a keyserver and continue to be used. Implement the logic to disable the key instead of delete it, figuring out --command-fd in the process. Note that the surefire way to disable a key involves including said key in the keyring package, such that it is both in foobar.gpg and foobar-revoked. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: simplify import in populateDan McGee1-5/+1
This finishes the cleanup started in 710e83999bbf. We can do a straight import from another keyring rather than all the funky parsing and piping business we were doing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: don't hide --verify details in populateDan McGee1-2/+4
Otherwise we're hiding extremely relevant bits like this one: gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: print message in populate if signature is missingDan McGee1-6/+14
Rather than saying it was invalid, tell the user no signature exists. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: clean up populate outputDan McGee1-3/+3
* Ensure usage message is indented correctly * Show short filenames for both the gpg keyring and revocation file Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: ensure array iterations are quotedDan McGee1-6/+6
When doing something like `pacman-key --edit-key 'Dan McGee'`, one would expect it to work, and not fail. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-15buildsys: remove existing symlinks before installingDave Reisner1-0/+2
This fixes build errors when performing a manual install straight to a filesystem where the files already exist. Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14makepkg: fix recreation of hardlinks to .gz manpagesDave Reisner1-5/+6
4ed12ae tightened up the logic to use only find, but ignored the fact that since the manpage hard link names were no longer captured. They were created as separate compressed manpages, rather than as hardlinks. This also introduces a minor efficiency of deleting all hardlinks at once and using proper iteration over an array rather than a string. Note to anyone else touching this code: e2fsprogs and libpcap are useful for testing this. If that changes in the future, you can use the below bash to locate others: IFS=$'\n' read -rd '' -a a < <(find /usr/share/man -type f \! -links 1) pacman -Qqo "${a[@]}" | sort -u I broke it! Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-14makepkg: add missing newline on passing gpg sourcecheckDave Reisner1-3/+4
When a sourceball passes this check without any warnings, a newline is omitted. Similar to the if clause of this else block, print a single new line at the end of the clause instead of accounting for each output. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-12makepkg: check for var existance before file existanceDave Reisner1-1/+1
This prevents makepkg from aborting with 'file not found' when changelog= or install= are declared in a PKGBUILD, but empty. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-11makepkg: unset errexit when sourcing /etc/profileDave Reisner1-1/+3
This is a fix for a bash3 specific bug, where a file sourced by /etc/profile would exit non-zero and make its way back up to makepkg, forcing it to exit after package installation. Along with unsetting the ERR handler, temporarily unset errexit to avoid this. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-08makepkg: use more awk'ish syntax in sanity checksDave Reisner1-6/+6
This simplifies the flow a bit, making the pipeline a little easier to grok. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-08makepkg: avoid for loop in deleting manpage hardlinksDave Reisner1-4/+2
find can do this all on its own and remain portable. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-08makepkg: act on function return value, not outputDave Reisner1-1/+1
Correcting a typo, as this function will never output anything. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-08makepkg: refactor check_pgpsigs outputDave Reisner1-16/+18
- display associated warnings on same line as pass/fail msg, to be more consistent with checksum verification output - properly error on a revoked key (matching pacman's behavior) Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-06makepkg: use globs in place of regexDave Reisner1-7/+9
We seem to enjoy using bash regex capabilities, but never referencing the result with BASH_REMATCH. Replace almost all regexes with equivalent globs which are faster and functionally equivalent in these cases. This enables the extglob shopt. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-06makepkg: unset variables as per !{make,build}flagsDave Reisner1-4/+2
Don't just set the flag variables to zero length strings, actually unset them from the environment. This fixes issues with broken gnu Makefies that use ?= for assigment, where the presence of a var is enough to make this condition avoid assignment. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-06rankmirrors: properly sort resulting timesDave Reisner1-1/+2
- Properly read each sorted line into a new array, instead of breaking on every word. - LC_COLLATE should apply to the sort portion of the pipeline, not the printing. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-03pacman-key: add --refresh-keys operationDan McGee1-3/+8
This allows new signatures to be pulled, revocations to be found, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-03pacman-key: split keyserver to a separate optionDan McGee1-15/+16
This also renames '--receive' to '-recv-keys' to match the wrapped gpg option name, rather than invent a new one, now that the calling convention is the same. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-03pacman-key help and documentation cleanupDan McGee1-6/+6
We were using the mystical [<foobar>] options which is some sort of cross between a <required> argument and an [optional] one. Remove this madness and do some other general cleanup/consistency work in the manpage. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-03pacman-key: document --lsign-keyDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01makepkg: fix overzealous PGP signature file matchingDan McGee1-2/+2
The regex wasn't rooted at the end of the filename, nor was it matching a period/dot before the file extension. The end result was this matched a file named '07_all_sig.patch' which is totally broken. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01makepkg: fix sanity checking in versioningDave Reisner1-3/+3
Read the entire variable, respecting escapes, which are necessary to retain for the successive eval. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01makepkg: read filenames in a while loopDave Reisner1-6/+4
Further improvments on 2ca27ab which will allow the changelog and install script files to contain whitespace. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01makepkg: fix breakage in eval'ing quoted stringsDave Reisner1-5/+5
Broken in 2ca27a by me, trying to fix another problem. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30pacman-key: add --lsign-key operationDan McGee1-3/+14
This allows local signing of a given key to help establish the web of trust rooted at the generated (or imported) master key. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30pacman-key master key generationDan McGee1-0/+25
This enables pacman-key, during --init, to generate a single secret key for the pacman keyring if one is not present. This will be used as the root of the web of trust for those that do not wish to manage it with their own key, as will be the default. This does not preclude later adding other secret keys to the keyring, or removing this one- we simply ensure you have at least one secret key available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30pacman-key: fix broken logic around updating trust databaseDan McGee1-4/+10
Any option that flips UPDATEDB=1 doesn't work right now due to what we thought was a good idea in commit cab1379a1ab14. Fix this by not including the update operation in the option count and special casing it where necessary. Also, bring back the helpful "Updating trust database" message. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: have --init add more options to default gpg.confDan McGee1-5/+22
This adds a add_gpg_conf_option() helper function which tries to be intelligent and only add not found options, and those which have not been explicitly commented out. The new options added are 'no-greeting', 'no-permission-warning', and a default 'keyserver'. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: refine permission and locking checksDan McGee1-3/+3
* secring.gpg can be 600, readable by root user only * ensure grep for lock-never option in check_keyring doesn't catch comments Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: rework and document holding keys in keyringAllan McRae1-7/+5
The HoldKey option was undocumented and was not suited for pacman.conf. Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list of keys not to be removed from the pacman keyring with the --populate option. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: update trust database for relevant operationsAllan McRae1-12/+9
After most operations that touch the keyring, it is a good idea to always run a check on the trustdb as this prevents gpg complaining on later operations. Inspiration-from: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>