summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2012-01-19Turn gpg commands into functions in pacman-keycanyonknight1-16/+58
Adds functions for every gpg command. By pulling out the gpg commands from the "program start" section, additional commands can be run before or after a specific gpg command without adding additional clutter to the function call section. Adds an explicit exit status of 0 to prevent arithmetic expansions from returning non-zero, thereby falsely causing pacman-key to have a non-zero exit status. This change creates the framework for additional error messages and better exit statuses being added to every pacman-key gpg call. Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19repo-add: clean up help messagesDan McGee1-6/+14
Use consistent blank lines across all commands, get rid of the translated double newlines which only serve to confuse translators, and fix -h/--help for that extra special third command this script offers. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: abort on missing download agentAllan McRae1-1/+2
makepkg would not abort on a missing download agent due to the output variable being declared local on the same line as the function call in the assignment. That would result in strange output such as: ==> Retrieving Sources... ==> ERROR: There is no agent set up to handle foo URLs. Check /etc/makepkg.conf. Aborting... -> Downloading foobaz... /home/arch/code/pacman/scripts/makepkg: line 401: foo://foobaz: No such file or directory ==> ERROR: Failure while downloading foobaz Aborting... Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: fix missing source file detectionAllan McRae1-1/+2
Declaring the variable as local on the same line as the assignment results in result of the assignment being returned rather than the result of the function on the righthand side of the assignment. Declaring the variable as local on a separate line means the result of the function on the r.h.s. is returned and our error function will be invoked if necessary (although it is practically impossible to ever trigger it...). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: simplify source archive generationAllan McRae1-5/+3
Simplify the source tarball generation by unifying the handling of local and remote files. This also allows local files to be found in $SRCDEST (FS#26580) and makepkg will abort on missing local source files (only possible to trigger in combination with --skipinteg). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-06Update translations from TransifexDan McGee27-202/+356
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-06Update scripts translation catalogDan McGee1-2/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23pacman-key: Add missing quotesTimothy Redaelli1-3/+3
Signed-off-by: Timothy Redaelli <timothy.redaelli@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05repo-add: enforce maximum .sig file sizeDan McGee1-7/+12
This prevents user error in adding a file generated via `gpg --sign` rather than `--detach-sign`, for example. The same 16KiB limit is used we use in our pacman download code. The section is moved above the checksum generation to avoid presenting info messages to the user if the signature isn't valid. Addresses a shortcoming pointed out in FS#27453. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01makepkg: avoid using comm for diff'ing package listsDave Reisner1-7/+9
Whereas comm will check inputs to see if they're sorted (and warn when they aren't), grep doesn't even care about ordering. In this particular instance -- neither do we. We're only interested that the two lists are equivalent. Fixes FS#26580. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01Miscellaneous post-4.0.1 updatesDan McGee1-7/+7
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-21Final changes before 4.0.1 releasev4.0.1Dan McGee1-3/+1
* Add last-minute changes to NEWS * Don't treat '_' or '_n' special in scripts when finding translatable strings; this breaks with one use of `read` and a dummy _ variable Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-21makepkg: trim trailing space from whitespace sensitive varsDave Reisner1-3/+3
This applies to pkgver, pkgrel, and epoch and ensures that any trailing whitespace outside of the context of the variable declaration itself is properly trimmed. The Bash parser will ignore this, and so should we. We don't need to worry about leading space because it would force a syntax error, or fail validation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee13-127/+159
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Update translations from TransifexDan McGee27-402/+769
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Updates in preparation for 4.0.1 releaseDan McGee1-2/+11
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner1-1/+1
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae1-2/+2
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17pacman-key: add a default keyserver timeout value on --initDan McGee1-0/+1
The default is supposidely 30 seconds from the gpg manpage, but that sure wasn't what I was seeing- it was somewhere closer to two minutes of silence. Add a more reasonable 10 second timeout value which should be good enough for any keyserver that doesn't totally stink at it's job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14makepkg: don't attach traps until after argument parsingDan McGee1-11/+9
Nothing we do in our traps is necessary this early in the script. This fixes FS#26196. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13scripts/*.sh.in: Fix signal handler error messagesLukas Fleischer2-3/+7
This includes some fixes to the messages that are displayed when a signal is caught in makepkg or repo-add: * Instead of always showing "==> ERROR: TERM signal caught. Exiting...", replace "TERM" by whatever signal is actually caught. * Fix a typo in the SIGERR error message in repo-add ("occurred" instead of "occured"). Francois already fixed this for makepkg in 1e51b81c. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13repo-add: Avoid race condition in signal handlersLukas Fleischer1-2/+8
There is a small chance that a user sends SIGINT (or any other signal that is trapped) when we're already in clean_up() which used to lead to trap_exit() being executed and the remaining code in clean_up() being skipped due to the bash signal/trap handler blocking EXIT (since its handler is already being executed, even if it's interrupted). In practice, this behaviour caused unexpected results (primarily because pressing ^C at the wrong time left a lock file behind): $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ==> ERROR: File 'foobar' not found. ==> No packages modified, nothing to do. ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck. ==> ERROR: Held by process 18522 Fix this and reduce the chance of race conditions in signal handlers by: * Unhooking all traps in both clean_up() and trap_exit(). * Call clean_up() explicitly in trap_exit() to make sure we remove the lock file and the temporary directory even if we send SIGINT when clean_up() is already being executed but didn't reach the unhook code yet. Also, add an optional parameter to clean_up() to allow for setting an explicit exit code when we call clean_up() from trap_exit(). Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee5-620/+765
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pacman-key: don't escape single quote in usage messageDan McGee1-1/+1
This screws up gettext and causes the message to display always untranslated. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee27-1084/+1386
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11makepkg: strip comments after pkgver/pkgrel when checking valueAllan McRae1-2/+2
Inline comments after pkgver or pkgrel would cause the sanity checks to fail so remove them before checking the value. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update translation message catalogs in prep for 4.0 releaseDan McGee1-9/+11
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update translations from TransifexDan McGee27-1084/+782
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06pacman-key: treat foo-trusted as an ownertrust export fileDan McGee1-6/+18
This allows it to serve double-duty. In order to allow users to base verification decisions off of both a valid signature and a trusted signature, we need to assign some level of owner trust to the keys we designate as trusted on import. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06pacman-key: refine and clarify import/import-trustdb behaviorDan McGee1-10/+3
* --import now only imports keys from pubkey.gpg and does not import owner trust; if you want to have both simply run the operations in sequence. * --import-trustdb has been simplified; it will overwrite existing values in the trust database as before, but there is no need to export it first as those values are safe if left untouched. * Fix the manpage referring to a non-existent option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-03makepkg: create tar file for bogus PKGEXTlolilolicon1-16/+10
If PKGEXT is not one of the recognized tar*'s, create_package() would create an empty package file and fail, since bsdtar on the left side of the pipe returns 141 on SIGPIPE (broken pipe). This patch changes the behavior for an invalid PKGEXT. A warning is printed on stderr, and a tar file is created. Also retire the obsolete $EXT variable. Add the obligatory comment why we don't use bsdtar's compression. Finally, fix mixed-tab-space indentation. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-30makepkg: support .tar.Z source packages creationlolilolicon1-1/+3
SRCEXT should allow whatever PKGEXT does. Also address an uninitialized use of $ret. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-30pacman-key: remove errexit flag from shebangDave Reisner1-1/+1
We're ill equipped to be using this flag as we don't trap and respond to the ERR signal. The result is that if is ever tripped, pacman-key will instantly exit with no indication of why. At the same time, we're already fairly good about doing our own error checking and verbalizing it before dying. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30pacman-key: return 0 from get_from if default value usedAllan McRae1-1/+4
This prevents the error trap being set off when GPGDir is commented in pacman.conf. Bug introduced in 507b01b9. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28pkgdelta: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the right-hand side of expression when the == or != operator is used, unless intended as a pattern. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28makepkg: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the righthand side of expression when the == or != operator is used, unless intended as a pattern. Quoting bash(1): When the == and != operators are used, the string to the right of the operator is considered a pattern. Any part of the pattern may be quoted to force it to be matched as a string. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-27makepkg: ensure '-' is last in a character globDave Reisner1-1/+2
If '-' isn't the last item, it's interpreted as a range and not literally, causing problematic behavior in parsing optdepends. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27pacman-key: use consistent punctuation in error messagesDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: allow get_from to return a default valueDave Reisner1-2/+4
Keep the non-zero return val to let the caller know that the key wasn't found. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: simplify writing to config fileDave Reisner1-5/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: normalize whitespace for optdepends in .PKGINFOAllan McRae1-1/+1
Many PKGBUILDs use formatting whitespace when specifying optdepends. This is removed when adding a package to a repo-database so the output of "pacman -Si <package>" and "pacman -Qip <package file>" becomes inconsistent. Instead, do the adjustment when creating the .PKGINFO file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: allow versioned optdepends with epochAllan McRae1-2/+2
Allow the specification of versioned optdepends with an epoch. This also (partially) enforces a whitespace between ":" and the description which is required for the future optdepends parsing code. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee28-795/+1951
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee27-715/+890
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: add an additional plain text 'foo-trusted' fileDan McGee1-1/+28
This is similar to the 'foo-revoked' file we had. This will be used to inform the user what keys in the shipped keyring need to be explicitly trusted by the user. A distro such as Arch will likely have 3-4 master keys listed in this trusted file, but an additional 25 developer keys present in the keyring that the user shouldn't have to directly sign. We use this list to prompt the user to sign the keys locally. If the key is already signed locally gpg will print a bit of junk but will continue without pestering the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: factor out validate_with_gpg() methodDan McGee1-16/+14
This was copy-pasted code for the most part once the filename was factored out. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: remove holdkeys functionalityDan McGee1-12/+0
We're putting the cart ahead of the horse a bit here. Given that our keyring is not one where everything is implicitly trusted (ala gpgv), keeping or deleting a key has no bearing on its trusted status, only whether we can actually verify things signed by said key. If we need to address this down the road, we can find a solution that works for the problem at hand rather than trying to solve it now before signing is even widespread. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: implement promptless lsigningDan McGee1-2/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: disable, don't remove, revoked keysDan McGee1-21/+13
Unlike our protégé apt-key, removing a key from our keyring is not sufficient to prevent it from being trusted or used for verification. We are better off flagging it as disabled and leaving it in the keyring so it cannot be reimported or fetched at a later date from a keyserver and continue to be used. Implement the logic to disable the key instead of delete it, figuring out --command-fd in the process. Note that the surefire way to disable a key involves including said key in the keyring package, such that it is both in foobar.gpg and foobar-revoked. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: simplify import in populateDan McGee1-5/+1
This finishes the cleanup started in 710e83999bbf. We can do a straight import from another keyring rather than all the funky parsing and piping business we were doing. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-26 04:15:29 +0100