summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2015-11-23lint_pkgbuild: explicitly return valueAllan McRae5-4/+12
Set the return value to be local and always explictly returns it. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-05Refactor lint_source to work with earlier versions of BashAaron Campbell1-1/+1
Negative subscripts to indexed arrays are not supported before 4.2. However, since substring expansion works on arrays, we can specify an offset of -1 to be taken relative to one greater than the maximum index of the specified array (see Parameter Expansion section of the bash man page). This works with both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman. Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28scripts/po: fix translated file nameAllan McRae1-1/+1
This file was renamed during review and its entry in POTFILES.in was not updated. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28makepkg: fix $pkgname element duplicationBenjamin Yates1-2/+2
run_split_packaging did not preserve the $pkgname array correctly, and would create duplicate entries in the list during restore. After restoring the backup (a b c) would become (a b c b c). This probably went unnoticed because during --install, pacman would reconcile the duplicates. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27libmakepkg: fix pkgver checkingAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-22makepkg: Fix hard-coded debug suffixMohammad Alsaleh1-2/+2
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Set CCACHE_BASEDIR to make paths in $srcdir relativeJan Alexander Steffens (heftig)1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Correctly layer distcc and ccacheJan Alexander Steffens (heftig)1-6/+13
ccache expects further compiler wrappers to be specified via CCACHE_PREFIX. Otherwise, ccache will hash the wrapper executable instead of the real one. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19libmakepkg: Add check_buildoption for distcc and ccacheJan Alexander Steffens (heftig)2-4/+38
makepkg used to check OPTIONS too, which could override BUILDENV. Implement a new function that handles these options more like OPTIONS. This also reduces code duplication a bit. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: separate "sourcefile" into two wordsAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19Remove space before ellipsesAllan McRae3-4/+4
Makes all use of ellipses consistent... Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22makepkg: remove ability to build individual packagesAllan McRae1-8/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: remove declaration of unused local variablesAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: return 1 on error in arch arrayAllan McRae1-2/+2
The return value was being assigned when an error was found in a PKGBUILD's arch array but it never was returned. Also remove error message explaining about adding the arch array to a PKGBUILD. That was added a long time ago when the arch array first became compulsory. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: update .gitignoreAllan McRae1-2/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22makepkg: remove FORCE_VER variableAllan McRae1-4/+0
This variable is no longer in VCS building. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: check if PKGBUILD variables are arrays or not as appropriateAllan McRae3-0/+67
When extracting variables from PKGBUILD (e.g. for .SRCINFO creation) we make assumptions about whether variables are arrays or not. This adds a check to the PKGBUILD linter to ensure variables are arrays or not as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: util/pkgbuild.sh needs processing on buildAllan McRae2-1/+1
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed command on build. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-08-08Remove ko_KR translationAllan McRae2-1762/+0
The "ko_KR" locale is the same as the "ko" locale. Remove the "ko_KR" variant as it is incomplete and has been superseded by "ko" on transifex. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20libmakepkg: move color settings to functionAllan McRae2-18/+24
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20dont remove x bit when marking pkgdir RODave Reisner1-1/+1
f170a94c137d355 potentially causes $pkgdirbase/$pkg to be undeleteable with -R or -C if a previous build was interrupted. We simply can't traverse to this directory, and rm blows up. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20libmakepkg: lint_package requires cd_safeAllan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20repo-add: Reject armored signaturesJohannes Löthberg1-0/+4
Pacman cannot handle armored signatures, so make repo-add error out if one is detected. Signed-off-by: Johannes Löthberg <johannes@kyriasis.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20makepkg: Add flag for printing SRCINFO to stdoutJohannes Löthberg1-1/+8
This commit adds a makepkg option to generate and print the SRCINFO file for a PKGBUILD, required by the new AUR, to stdout. AUR 4.0 will use Git instead of source tarballs for uploading packages, so making makepkg capable of printing the SRCINFO would simplify package management, instead of having to extract it from a source tarball. It is also useful for scripting other things, so that instead of having to parse PKGBUILDs, one can make makepkg generate the SRCINFO and then you can parse that instead, which is much simpler and less error-prone. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20repo-add: Generate unarmored DB signatureJohannes Löthberg1-1/+1
Pacman cannot handle armored signatures, so use gpg's --no-armor flag to force an unarmored signature. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract functions for source download and extractionAllan McRae11-524/+749
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract functions for handling source URLsAllan McRae5-120/+148
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: fix test styleAllan McRae2-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: move more functions for extracting information from PKGBIULDsAllan McRae2-46/+46
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract more utility functionsAllan McRae2-31/+31
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract get_full_version and get_pkg_archAllan McRae2-35/+35
These functions group in with other functions that extract PKGBUILD information. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16Simplify libmakepkg .gitignoreAllan McRae1-11/+2
2015-05-16makepkg: put further restrictions on pkgbaseAllan McRae1-0/+9
pkgbase should be subject to the same restrictions as pkgname Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16makepkg: merge validate_pkgver into check_pkgverAllan McRae2-9/+5
The check that pkgver is non-empty done in check_pkgver should also be performed after running the pkgver() function. Merge validate_pkgver into check_pkgver and run check_pkgver after updating pkgver. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract PKGBUILD linting functionsAllan McRae21-333/+874
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract in_arrayAllan McRae4-16/+41
2015-05-16libmakepkg: move functions for extracting pkgbuild attributesAllan McRae3-106/+130
Also rename some functions for clarity: funcgrep -> grep_function extract_global_var -> extract_global_variable extract_function_var -> extract_function_variable pkgbuild_get_attribute -> get_pkgbuild_attribute Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-12libmakepkg: fix test bracket styleAllan McRae14-14/+14
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-12makepkg: Empty/create only $pkgdir's relevant to current PKGBUILDDavid Macek1-2/+5
Currently makepkg clears the whole $pkgbasedir which is needless. Moreover, in the obscure case of multiple makepkg runs (with different $pkgname) that share a $pkgdirbase, only $pkgdir's from the last run will remain. Since I consider the contents of $pkgdir an important artifact, this commit restricts the deletion to individual $pkgdir's. When CLEANUP is set, the behavior is unchanged. Discussed in: https://lists.archlinux.org/pipermail/pacman-dev/2015-February/019939.html Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-12makepkg-template: support multiple --template-dirsDominik Fischer1-16/+21
Especially when maintaining local templates in addition to the ones stored in /usr/share/makepkg-template, it can be useful to include templates stored in multiple different locations into one PKGBUILD. This patch makes this possible by allowing --template-dir to be specified multiple times. This also introduces a dedicated error message when a template cannot be found, in contrast to the already existing "Couldn't detect version for template '%s'". If a template of the same name is present in more than one of the given directories, the last one always takes precedence. Neither the default behaviour without the option given, nor the handling of a single template dir is changed. Signed-off-by: Dominik Fischer <d.f.fischer@web.de> Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26Add makepkg option --packagelistIvy Foster1-3/+25
makepkg --packagelist prints the name of each package that would normally be produced, minus $PKGEXT, and exits. Implements FS#42150 Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: merge desc and depends filesAllan McRae1-7/+3
There is little point in these two files being separated as the whole sync db is parsed at once. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26makepkg: write validpgpkeys to .SRCINFOAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26Always create files databaseAllan McRae1-102/+153
Both the "db" and "files" databases are created in one call to repo-add. Only the "foo.db.tar.xz" name is passed to repo-add. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: remove duplication finding old package detailsAllan McRae1-9/+1
The information needed to create a delta entry and remove the old package from the filesystem are the same. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: check early for xdelta if it is neededAllan McRae1-4/+24
The check for xdelta3 was done as needed (and not in all cases). Do this check early so that repo-add does not abort part way through. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: only update database if entire command succeededAllan McRae1-4/+4
It is not hard to think of situations where the repo database should not be updated unless the whole operation succeeds. Error out before a partial database update occurs. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: move database creation into its own functionAllan McRae1-20/+22
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26repo-add: move database rotation into its own functionAllan McRae1-30/+37
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-26Merge branch 'maint'Allan McRae1-3/+3
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-14 17:29:02 +0100