Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit e76ec94083235ddc5510ab57b7c2bc12a1d34e8a)
|
|
Extracting function variables containing arbitrarily scoped variables of
arbitrary nature is a disaster, but let's at least cover the common case
of using the actual '$pkgname' in an install/changelog file. It's the
odd case of actually being basically justified use of disambiguating
between the same variable used in multiple different split packages...
and also, --printsrcinfo already uses and overwrites the variable
'pkgname' in pkgbuild_extract_to_srcinfo, so this "works" in .SRCINFO
but doesn't work in .src.tar.gz
It doesn't work in lint_pkgbuild either, but in that case the problem is
being too permissive, not too restrictive -- we might end up checking
the same file twice, and printing that it is missing twice.
Fixes FS#64932
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit d626a17ef94d79975ff17d04250152ea46aaade3)
|
|
In commit 9c817b654996249b8022e189ee7e2692f4668431 we made these sources
extendable, and heuristically determined the correct extraction
functions to use. But our fallback for protos that didn't have an exact
extract_* function didn't take into account that 'extract_file' matches
an actual proto... so we passed the netfile in while the function
expected a file.
Solution: the function should expect a netfile too, thereby allowing us
to delay an attempted resolution of netfile -> file, to the one case
where it is actually used. This makes us slightly more efficient in the
non-file case, makes our functions a bit more consistent, and makes
file:// extraction work again.
Fixes FS#64648
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit 349c22d043290ccd0cce9f30981f5415e295442a)
|
|
When file is called via fakeroot, it doesn't matter whether you use -z
or not, it is still incompatible with seccomp. Fix by configuring it
with FILECMD when used in the fakeroot 'tidy' run.
Fixes FS#65100
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Fixes issue where users were allowed to run cleanup while running
--geninteg or --printsrcinfo or --packagelist, thus mixing invalid
responses into stdout.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Exclude files with hardlinks when cat'ing all the files, and do a second
run to look at each file with hardlinks, keep track of the ones we've
already operated on, and only cat each inode once. Then use "wc -c" to get
the size of all (deduplicated) files the same way we were already doing.
Original-patch-by: Ronan Pigott <rpigott@berkeley.edu>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
zipman:
read -r protects against those evil manpages whose filenames contain
backslash escapes, (muahahaha?)
IFS= read protects against filenames with:
- leading whitespace (but no one is actually stupid enough to configure
their MAN_DIRS=() in makepkg.conf with such silly directories, *right*?)
- trailing whitespace (but likewise, no one should be stupid enough to
write an uncompressed manpage for section '1 ' or something)
Also fix several other cases where we read filenames without protecting
against surrounding whitespace, or without using null-delimited
filenames when we could trivially do so.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2018 NEW=2019
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg now complains when PACKAGER is not in the format
"name <email>".
Hide this warning when PACKAGER is unset but still warn if it is set to
something out of format.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 7afe51171 attempted to add zstd compression support to repo-add,
but failed...
FS#64213
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Also caught the source of a man page not being distributed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pull all translations with >75% completion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Saving fflages breaks reproducible builds due to encoding information
specific to the filesystem that was used to build the package. This
information is not needed for packaging purposes anyway.
Including fflags also means that attempting to extract a package file as
root (or fakeroot) might result in angry warnings being printed to the
console by bsdtar, followed by a non-zero exit code, unless the user
remembers to use --no-fflags during extraction. This is unpleasant UI, even
if pacman itself won't care about these.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an email address is specified, we use --locate-key to look up the key
using WKD and keyserver as a fallback. If the key is specified as a key
ID, this doesn't work, so we use the normal keyserver-based --recv-keys.
Note that --refresh-keys still uses the keyservers exclusively for
refreshing, though the situation might potentially be improved in a new
version of GnuPG:
https://lists.gnupg.org/pipermail/gnupg-users/2019-July/062169.html
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
remove_deps is called once, at the end of clean_up() before makepkg
exit. If remove_deps returns >0 (e.g. when pressing "n" in the resulting
prompt), the error is caught by the ERR signal handler. This in turns
sends SIGUSR1 to the process group, with resulting exit code 138.
In case remove_deps fails, this patch exits makepkg with E_REMOVE_DEPS
if there was no previous error (that is, EXIT_CODE equals E_OK).
Otherwise, makepkg exits with EXIT_CODE.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When running `makepkg -i` it may be necessary to first remove make- and
checkdepends before installing the built package - for example if they
conflict each other. This is the case for wireguard-arch which
makedepends and conflicts wireguard-dkms.
Signed-off-by: Erich Eckner <git@eckner.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Without the -f option to wait, we might move on and try to delete the
logpipe before the process is completed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The logpipe fifo can remain when exiting on a non-error condition such
as recieving signals INT and USR1. This can be seen by doing either a
manual CTRL-C to interrupt the build or by sending a signal such as:
$ makepkg & sleep 5 ; kill -USR1 $!
Remove the fifo in all cases on script exit if it still exists.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Not all compression types can be detected in the seccomp sandbox, so we
need to disable it. This requires either configuring makepkg to know the
sandbox is available, or checking for file >= 5.38 in which the sandbox
option is a no-op even when seccomp is disabled.
- Requires autoconf-archive for autotools version compare macro.
- meson version comparison could be made a lot simpler using meson-git.
Fixes FS#58626
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There is no good reason to bloat the keyring by importing tons of
signatures we cannot use; drop any signatures that don't validate
against another available key (probably the master keys).
If any desired signatures get cleaned, the key can be refreshed after
importing the new signing public key.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
By default, the latest versions of GnuPG disable the Web of Trust and
refuse to import signatures from public keyservers. This is to prevent
denial of service attacks, because refusing to import signatures only if
the key size is too big, is apparently too silly to consider.
Either way, pacman needs the WoT. If pacman imports a key at all, it
means everything failed and we are in fallback mode, trying to overcome
a shortcoming in the availability of keys in the keyring package.
(This commonly means the user needs to acquire a new key during the same
transaction that updates archlinux-keyring.)
In order for that new key to be usable, it *must* also import signatures
from the Master Keys.
I don't give credence to this supposed DoS, since the worst case
scenario is nothing happening and needing to CTRL+C in order to exit the
program. In the case of pacman, this is better than being unable to
install anything at all (which is gnupg doing a much more harmful DoS to
pacman), and in the already unusual case where something like
--refresh-keys is being used directly instead of depending on the
keyring package itself, gnupg supports WKD out of the box and will
prefer that for people whose keys are marketed as being non-DOSable.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an option is a two-part option, we print both (separated by IFS=' '),
but when grepping to see if it already exists, we only checked the first
component. This means that something like keyserver-options could only
check if there were existing keyserver options of any sort, but not
which ones.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The rust language supports $RUSTFLAGS to be used automatically in all
rustc invocations. Allow setting this in makepkg.conf (e.g. for
optimization or debuginfo support), and teach debug+strip to pass the
rustc command line argument necessary to rewrite source file paths in
the debugging symbols.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman should be able to extract an email address from PACKAGER for WKD
lookup, so issue a warning if it is not of the form
"Example Name <email@address.invalid>". Neither the name nor the email
address must contain additional angle brackets.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
An artificial symbol can be produced when requesting debugging symbols
and the compiler has inlined a function. These symbols will give
spurious results when listing source files for inclusion in debug
packages. This will ignore these symbols and avoid an error that can be
generated when creating a debug package.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
bash uses POSIX extended regular expressions via regex(3), which does
not guarantee support for shorthand character classes. Although glibc
supports it, msys2-runtime does not.
Make sure the completion script works (hopefully) everywhere by being
more portable.
Fixes: https://github.com/msys2/MSYS2-packages/pull/1549
Original-patch-by: plotasse <platos@protonmail.ch>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#63000
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgname and pkgver are used as directory names within database files.
libarchive does not provide a reliable locale-independent method for
reading archive file names, causing errors when archive paths include
non-ascii characters.
This is a first step toward dealing with FS#49342, by hopefully reducing
the number of packages with non-ascii data in the wild before updating
libalpm to reject them outright.
See https://github.com/libarchive/libarchive/wiki/Filenames
and https://github.com/libarchive/libarchive/issues/587
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When scripting/automating around makepkg, it is sometimes desirable to
know how makepkg will be configured to operate. One example is the
archlinux devtools, which must forward select makepkg.conf variables
into a build chroot (for example PACKAGER) or use those variables itself
(for example {SRC,PKG,LOG}DEST).
The configuration file can be in up to 3 places, and should be capable
of being overridden via environment variables. It is sufficiently
complex to represent distinct functionality, and sufficiently useful to
merit easy accessibility in other scripts, therefore, let us move it
into a publicly exposed utility library.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These variables must begin with .src.tar / .pkg.tar respectively, so
fail early if those expectations are not matched. This prevents makepkg
from creating e.g. package files literally named "./pacman-5.1.3-1-x86_64"
which are actually uncompressed tarballs.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Implements FS#17752
Signed-off-by: Luca Bertozzi <ekarndam@autistici.org>
|
|
file 5.37 changed the gzip MIME type from application/x-gzip to
application/gzip, so support this when checking to extract source files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since makepkg exports a public library of functions, other projects may
wish to use these functions. Highlights include parseopts or our
messaging functions.
Install a pkg-config file in order to let downstream users detect where
they can source the libmakepkg functionality. This is useful e.g. to
gracefully handle the case where a thirdparty project is configured and
installed into a different datarootdir from pacman, but still wants to
use the installed pacman's version of libmakepkg.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When the executable checking was refactored into libmakepkg, it carried
with it, usage of $E_* error codes, which need to be declared from
error.sh but are only available when the parent program already sources
error.sh; additionally, message.sh was only loaded in a parent
library, but not where it was needed, and option.sh was often loaded
when it wasn't needed at all.
util.sh, meanwhile, has always depended on message.sh functions.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The right-hand side of the [[ ... = ... ]] keyword is an exception to
the general rule that quoting is unnecessary with [[
This is usually not a problem, e.g. in libmakepkg, lint_one_pkgname will
already fail if pkgname has an asterisk, but it certainly doesn't hurt
to be "more proper" and go with the spec; it is more dangerous in
repo-add, which can get caught in an infinite loop instead of safely
asserting there is no package named 'foo*'.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes "arch" and "checkdepends" never having been unset, fixes b2sums
(but not ${!b2sums_@}) being recently left out.
The "build" function used to be unset as well, explicitly unset it as a
function and do the same for other official functions as well.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit b5191ea140386dd9b73e4509ffa9a6d347c1b5fa we moved to using
shell globbing to print package files for a couple of reasons including
reproducible packaging of .METADATA files.
Unfortunately, this only works reliably when the glob pattern does not
resolve to a symlinked directory due to a change in the bash 5.0
release. Note that the previous, desired behavior was rather to merely
refuse to recurse into symlinked directories, but due to an unrelated
issue, the symlink handling for globstar was reworked in a way that had
this side effect.
See https://lists.gnu.org/archive/html/bug-bash/2019-04/msg00015.html
for discussion; this may be fixed at some point, but bash 5.0 is broken
either way.
The appropriate way of handling this seems to be to use **/* to match
instead; this produces the same results on both bash 4 and bash 5, as
the ** matches any leading directory component (or none), and the *
matches any file, directory, or symlink to either one.
Fixes FS#62278
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "tip" ref actually signifies the most recently updated branch. hg
does not support a default branch named anything other than "default",
except by creating a "@" bookmark. The correct way to explicitly update
to the default clone ref, is therefore to use one of these, rather than
"tip".
Fixes FS#62092
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
One of the callers was changed to use known_hash_algos, one was not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|