summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2012-01-19Fix broken output when asking question and stdin is pipedOlivier Brunel1-0/+6
When asking question and stdin is piped, the response does not get printed out, resulting in a missing \n and broken output (FS#27909); printing the response fixes it. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Remove unused strtoupper() functionDan McGee2-14/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Don't remove unknown files in cache cleaning codeDan McGee1-22/+10
This removes the hack I added to skip '*.sig' files earlier since there are other files that also fall into the same bucket- source packages from `makepkg --source`, delta files, etc. Rather than prompting for each and every one, simply skip them. Doing '-Scc' rather than '-Sc' will delete these files if that is really what you want to do. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-12Use fileno() in isatty() callDan McGee1-1/+1
This was our only use of the function that had a hardcoded file descriptor. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-06Update translations from TransifexDan McGee5-29/+31
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23Allow comments after repo section header in pacman.confAllan McRae1-5/+7
Pacman assumes that the final character of a line specifing a repo in pacman.conf is a "]". But it did not clean whitespace from the line after removing any comments. So lines like: [allanbrokeit] # could break system caused pacman not to recognize the repo. Adjust config parsing to strip comments before trimming whitespace from the end of the string. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01Miscellaneous post-4.0.1 updatesDan McGee1-4/+4
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-21Final changes before 4.0.1 releasev4.0.1Dan McGee1-1/+2
* Add last-minute changes to NEWS * Don't treat '_' or '_n' special in scripts when finding translatable strings; this breaks with one use of `read` and a dummy _ variable Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee14-150/+163
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Update translations from TransifexDan McGee27-410/+403
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Updates in preparation for 4.0.1 releaseDan McGee1-4/+4
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee1-2/+5
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01src/util: link vercmp against .lo, not the .oDave Reisner1-1/+1
This seems to fix FS#26652. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove remaining usages of fprintf() from frontendDan McGee2-4/+5
These can either be replaced with pm_printf() if they are error related, or in the fprintf(stdout, ...) case a bare printf() will do. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove pm_fprintf() in favor of pm_printf()Dan McGee8-60/+47
Now that pm_printf() always prints to stderr, we don't need this second function that was always used with stderr as the first argument. Thus, this patch removes the function and makes the following sed replacement: sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Use stderr as output stream for pm_printf()Dan McGee1-1/+1
This matches what we now do in our backend callback function- all debug/info/warning/error/etc. messages should be on stderr. These are all the messages with a "warning:" or other type prefix, so does not affect general pacman output. This should fix the output confusion noted in FS#26555. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Table display: print message with warning: prefixDan McGee1-1/+2
Use the normal error functions here rather than a bare fprintf(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Coding style cleanupsDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12VerbosePkgLists: format table lines in i18n-compatible wayDan McGee1-43/+48
This had the unfortunate implementation detail that depended on the strings having 1 byte == 1 column hold true. As we know, this is not at all the case once you move past the base ASCII character set. Reimplement this whole thing so it doesn't depend on format strings at all. Instead, simply calculate the max column widths, and then when displaying each row add the correct amount of padding using UTF-8 safe string length functions. Before: 名字 旧版本新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB After: 名字 旧版本 新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee4-323/+358
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee27-677/+786
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pactree: Make error message smarter in register_syncs()Lukas Fleischer1-1/+1
Our error message used to be very unclear when the configuration file could not be found: $ ./pactree -lsr gtk error: failed to register sync DBs Instead, display an accurate message and include the file name: $ ./pactree -lsr gtk error: config file /usr/local/etc/pacman.conf could not be read Also, move the error message inside register_syncs() to allow for differentiating between different errors that might require a handler in the future. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pactree: Add "--config" optionLukas Fleischer1-3/+15
This allows for specifying an alternate configuration file path, similar to pacman's "--config" option. Given that there is currently no other way to tell pactree to read from another configuration file (except for patching or symlinking), this seems totally sensible - even if there are plans to refactor and/or replace the standalone configuration file parser. We do not define a short option for the sake of consistency with pacman's set of command line options. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update translation message catalogs in prep for 4.0 releaseDan McGee1-7/+7
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update translations from TransifexDan McGee27-1324/+996
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Remove redundant transaction size outputAllan McRae1-1/+1
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is redundant as the difference of the first two is the last. Instead, only print "Installed Size" and "Net Upgrade Size" when both the installed and removed are non-zero. This results in the following output in the following cases: - package installation only: Installed Size - package removal only: Removed Size - package installation involving replacement: Installed + Net Upgrade Size - package upgrade: Installed + Net Upgrade Size - combination upgrade and installation: Installed + Net Upgrade Size Download Size remains outputted whenever something is downloaded. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-29Remove redundant "removal" output in pure remove operationAllan McRae1-0/+3
Printing "[removal]" beside all package names is redundant when all packages are being removed (i.e. when using -R). Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-28Refactor display_targets to not be recursiveDan McGee1-33/+26
This also fixes a memory leak and makes the dual-purpose "rows" variable go away in favor of storing the rows and non-verbose names separately. This also fixes some potential memory leaks and/or wrong behavior due to the config->verbosepkglists flag being flipped, which we should never be doing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28verbose package lists: remove errant debuggerDan McGee1-2/+0
Left this in as part of the last set of commits, whoops. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Always show download size if -w/--downloadonly was providedDan McGee2-3/+3
The prompt can be rather confusing otherwise when all files have already been downloaded, but there is not a single total size listed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Table format creation code cleanupDan McGee1-21/+27
Better scoping of variables for the most part, and ensure we are using string_length() and not strlen() as appropriate. Also refactor the longest cell code to call string_length() a lot less; by simply using an array of max sizes we don't have to recompute values nearly as much. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Use unsigned types for indent width and column countDan McGee3-26/+26
For getcols(), the functions we call return a value of type 'unsigned short', so it makes sense for us to do the same. string_length() is meant to behave like strlen(), so it should return type size_t. This exposes other functions such as indentprint() which should also be using signed return types. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Show download sizes when using -S/--syncDan McGee1-5/+21
We now label the old 'Size' column as 'Net Change' to reflect the reality of what we are looking at. Sync operations now get an additional 'Download Size' column. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Keep track of explicitly added and removed packagesDan McGee7-5/+33
This allows us to sort the output list by showing all pulled dependencies first, followed by the explicitly specified targets. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Combine add and removal package list displayDan McGee4-64/+110
There was no real reason for these to be done separately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Avoid comparison between signed and unsigned typesAllan McRae1-1/+2
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26Revamp pacman signal handlerDan McGee1-23/+23
* All errors now go to stderr, so do the same here and simplify the writing of the error message. * Add SIGHUP to the handled signal list, and don't repeat code. * Attempt to release the transaction (e.g. remove the lock file) for all of HUP, INT, and TERM. Signals HUP and INT respects transaction state, TERM will immediately terminate the process. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee28-1136/+2195
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee27-516/+553
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add status and check for key being disabledDan McGee1-0/+3
Because we aren't using gpgv and a dedicated keyring that is known to be all safe, we should honor this flag being set on a given key in the keyring to know to not honor it. This prevents a key from being reimported that a user does not want to be used- instead of deleting, one should mark it as disabled. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add new import key question enum value and stub frontend functionDan McGee1-0/+9
This is for eventual use by the PGP key import code. Breaking this into a separate commit now makes the following patches a bit easier to understand. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Fix signature printing in package infoDan McGee1-1/+1
pm_asprintf() does not return a length as asprintf() does. Fail. Make sure it is not -1 as that is the only failure condition. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: add note if libcurl disabled and no XferCommandDan McGee1-0/+2
Just a helpful warning for those users in this unenviable position. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: include file and line number in more errorsDan McGee1-12/+20
Before: $ pacman -Si pacman error: invalid value for 'SigLevel' : 'FooValue' After: $ ./src/pacman/pacman -Si pacman error: config file /etc/pacman.conf, line 88: invalid value for 'SigLevel' : 'FooValue' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Pull option names out of messages in config parsingDan McGee1-7/+9
This allows some message reuse, as well as making it clear to translators what *not* to translate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Check capabilities in SigLevel option parsingDan McGee1-2/+11
Only allow turning it on if the backend library has support for it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Move default siglevel value from backend to frontendDan McGee1-7/+3
This takes the libraries hidden default out of the equation: hidden in the sense that we can't even find out what it is until we create a handle. This is a chicken-and-egg problem where we have probably already parsed the config, so it is hard to get the bitmask value right. Move it to the frontend so the caller can do whatever the heck they want. This also exposes a shortcoming where the frontend doesn't know if the library even supports signatures, so we should probably add a alpm_capabilities() method which exposes things like HAS_DOWNLOADER, HAS_SIGNATURES, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-21Fix int/size_t type in alpm_list_count() callDan McGee1-2/+2
alpm_list_count() returns size_t, which we should use to store the result since it is easy enough to format for printing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Split package validation and load loopsDan McGee1-0/+9
This adds a some new callback event and progress codes for package loading, which was formerly bundled in with package validation before. The main sync.c loop where loading occurred is now two loops running sequentially. The behavior should not change with this patch outside of progress and event display; more changes will come in following patches. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman/upgrade: print 'loading packages...' only onceDave Reisner1-1/+1
Do this outside the loop to prevent the message from being displayed (and pluralized!) for each individual package. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-01 23:53:07 +0100