summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2011-01-29pacman/remove: switch to new alpm_remove_pkg interfaceXavier Chantry2-4/+32
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/upgrade: switch to new interfaceXavier Chantry1-1/+10
Note that there is a behavior change here : if the same package name appeared several times in the target list, the alpm_add_target interface chooses the new package, while alpm_add_pkg returns PKG_DUP. I don't see why we cannot unify the behavior of -S and -U, and just choose one behavior that applies to both. Otherwise, it's always possible to handle these different behaviors in the frontend, it just requires more work. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/sync: rewrite target handlingXavier Chantry1-15/+95
This uses the new public functions to handle targets from the frontend, like it used to be : 1) alpm_find_dbs_satisfier to find (optionally versioned) package or provision 2) alpm_find_grp_pkgs to find members for a groups 3) alpm_add_pkg to finally add the pmpkg_t from 1 or 2 Of course, this adds more code to the frontend, but it completely deprecates sync_target and sync_dbtarget interfaces. This all-in-one interfaces felt wrong and left no control to the frontend. A good frontend should just use alpm_add_pkg, with pkg coming from alpm_db_get_pkg (for normal targets), alpm_find_dbs_satisfier (for versioned provisions) or alpm_find_grp_pkgs (for groups). This also opens the way to provide a better group handling in pacman without constraint from libalpm and callbacks. In ignore006, only the retcode changes, because no package was found to satisfy the target (the only possible package is ignored). Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Add interactive provider selectionXavier Chantry3-0/+70
If there are multiple providers in one db, pacman used to just stop at the first one (both during dependency resolution or for pacman -S 'provision' which uses the same code). This adds a new conversation callback so that the user can choose which provider to install. By default (user press enter or --noconfirm), the first provider is still chosen, so for example the behavior of sync402 and 403 is preserved. But at least the user now has the possibility to make the right choice in a manual run. If one of the provider is already installed, it is picked for reinstall/upgrade, so that provision 002/003 pactest now pass. $ pacman -S community/smtp-server :: There are 3 providers available for smtp-server: 1) courier-mta 2) esmtp 3) exim Which one do you want to install? Enter a number (default=1): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Remove need to explicitly register the local DBDan McGee7-22/+19
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Query fileowner performance improvementsDan McGee1-15/+33
Clean up some of the code by doing less string copying and printing. This is accomplished by either doing it after we know we need it, or taking advantage of the fact that some strings never change such as the root directory prefix. Also, fix an issue where a file at the root level (e.g. /foobar) could not be queried. End result is a much faster user experience when combined with the mbasename() changes. These timings are for looking up 113 files in /etc/, some of which are owned and some which are not. $ find /etc -maxdepth 1 -type f | xargs time pacman -Qo >/dev/null 6.10user 0.05system 0:06.17elapsed 99%CPU (0avgtext+0avgdata 131040maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps $ find /etc -maxdepth 1 -type f | xargs time ./src/pacman/.libs/lt-pacman -Qo >/dev/null 0.86user 0.04system 0:00.92elapsed 99%CPU (0avgtext+0avgdata 131120maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps I'll take a 600% increase in speed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Improve mbasename performanceDan McGee3-16/+8
Rather than roll our own, use strrchr() instead, which glibc may have a better implementation than the simple iteration method we were using. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Be smarter about failure to read backup file contentsDan McGee1-1/+11
Instead of always printing MISSING, we can switch on the errno value set by access() and print a more useful string. In this case, handle files we can't read by printing UNREADABLE, print MISSING on ENOENT, and print UNKNOWN for anything else. Fixes FS#22546. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Mark backup status strings as untranslatedDan McGee1-3/+3
And also change "Not Modified" -> "UNMODIFIED" for consistency. This makes it a lot easier to machine-parse this and not worry about locale differences. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Refactor backup file status check into separate functionDan McGee1-24/+35
This will make it a lot easier to use this stuff elsewhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'epoch-work'Dan McGee1-2/+2
2011-01-22Makefile: Use git describe --dirty for GIT VERSIONXavier Chantry1-1/+1
dirty indicates if the repo has uncommited changes or not when building, so dont hardcode this info. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Allow version comparison to contain epoch specifierDan McGee1-2/+2
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also borrow some of their parsing code for our purposes (thanks!). Add some new tests to our vercmp shell script tester for epoch comparisons, and then make the code work with these newfangled epoch specifiers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Merge branch 'maint'Dan McGee1-2/+2
Conflicts: lib/libalpm/be_files.c
2011-01-12Make debug config messages consistent in capitalizationDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Add a progressbar for package integrity checkingDan McGee1-2/+7
This can take a while too, and it is really easy to add the necessary callback stuff for adding a progressbar. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Small fix to download size lookup and a loggerDan McGee1-1/+3
These were just two small things I came across today and found could be fixed or helpful, so I've added them and I'm not sure what else to bundle them with. commit_count++ Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Use double rather than float everywhereDan McGee3-11/+10
No real need to use the smaller floating point types here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Progress callback cleanups and fixesDan McGee1-27/+21
* Remove a stale comment * Fix a logic error- the conditional disagreed with the comments * Remove some unnecessary floating point casts Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Fix some more simple conversion "errors"Dan McGee6-18/+17
None of these warn at the normal "-Wall -Werror" level, but casts do occur that we are fine with. Make them explicit to silence some warnings when using "-Wconversion". Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Use size_t for alpm_list sizesAllan McRae2-6/+7
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae19-20/+20
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-06vercmp: always return 0 if we perform a compareDan McGee1-2/+3
And change the wording slightly to indicate we *print* a value, not *return* it. You can't return negative values (they get coerced to 255), so it isn't worth it to try and cram the result into the return code. Acked-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Declare all local functions staticAllan McRae4-4/+4
All functions that are limited to the local translation unit are declared static. This exposed that the _pkg_get_deltas declaration in be_local.c was being satified by the function in packages.c which when declared static caused linker failures. Fixes all warnings with -Wmissing-{declarations,prototypes}. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Detect undefined PATH_MAXAllan McRae2-0/+4
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21testdb: update for new database formatDan McGee1-33/+21
Sync DB's no longer have an extracted directory, so remove the files check for those. Local databases no longer have a 'depends' file, so kill that check as well. Finally, do a little other cleanup and remove the need for PATH_MAX. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21Always specify arguement type in function delcarationsAllan McRae2-2/+2
Always declare a function with (void) rather than () when we expect no arguements. Fixes all warnings with -Wstrict-prototypes. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Explicitly test time difference is greater than zeroAllan McRae1-1/+1
We are comparing a floating point number so should use an inequality rather than implicitly testing != 0. Prevents warning given by -Wfloat-equal. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Display progress bar for disk space checkingAllan McRae1-0/+9
Checking disk space needed for a transaction can take a while so add an informative progress bar. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Add configuration option to control disk space checkingAllan McRae1-0/+2
Disk space checking is likely to be an unnecessary bottleneck to people with reasonable partition sizes so add a configuration option to allow it to be disabled/enabled as wanted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Remove AC_TYPE_SIGNAL usageDan McGee1-1/+1
This macro is deemed unnecessary by even the autoconf guys, so we really don't need to use it. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13dirent usage cleanupDan McGee1-1/+0
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13src/util: update .gitignoreDan McGee1-7/+8
Add pactree and sort entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pactree: use variables for color and tree outputXavier Chantry1-57/+39
This allows to very easily support non-color and linear mode, by just setting the variables to an empty string, very much like it was done in the bash script. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13pactree: separate dependency and print logicXavier Chantry1-60/+92
The deps walking code simply calls print_start, print, print_end, and all the printing logic is handled there. The unresolvable printing is disabled for now because it does not handle linear mode, and the linear and color output will be re-written. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13pactree: rewrite in CDave Reisner2-1/+362
Use the bash script in contrib as the basis for a C rewrite using libalpm. The speedup can go from dozens of seconds to less than one second. Colorized output is preserved. The --graph option generates output that graphviz's `dot' utility will understand to draw us a graph. Output is written to stdout and it is left up to the user to pipe the data and determine the output characteristics. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13alpm/remove.c : respect --dbonly during remove-upgradeXavier Chantry1-2/+1
When a -Sk or -Uk operation induced a removal of an existing local package, --dbonly was not in effect and the files were all removed. Fixing this behavior was already marked as TODO in database012 pactest ------------ TODO: I honestly think the above should NOT delete the original les, it hould upgrade the DB entry without touching anything on the file stem. E.g. this test should be the same as: pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz ------------ Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchup] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pacman: sort --help outputXavier Chantry2-51/+99
Example with pacman -Uh : $ pacman -Uh options: -b, --dbpath <path> set an alternate database location -d, --nodeps skip dependency checks -f, --force force install, overwrite conflicting files -k, --dbonly only modify database entries, not package files -r, --root <path> set an alternate installation root -v, --verbose be verbose --arch <arch> set an alternate architecture --asdeps install packages as non-explicitly installed --asexplicit install packages as explicitly installed --cachedir <dir> set an alternate package cache location --config <path> set an alternate configuration file --debug display debug messages --ignore <pkg> ignore a package upgrade (can be used more than once) --ignoregroup <grp> ignore a group upgrade (can be used more than once) --logfile <path> set an alternate log file --noconfirm do not ask for any confirmation --noprogressbar do not show a progress bar when downloading files --noscriptlet do not execute the install scriptlet if one exists --print only print the targets instead of performing the operation --print-format <string> specify how the targets should be printed Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchups] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13CLI args: update --help and manpageXavier Chantry1-83/+81
The three parts (help, manpage and code) are now organized in the same way and much easier to compare : - specific options - install/upgrade options for -S and -U - transaction options for -S -R and -U - global options After this re-organization, it was easy to update and sync the three components together. Duplication is also avoided. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pacman/deptest: reimplement with alpm_find_satisfierXavier Chantry1-3/+11
It's very easy to re-implement the -T feature with the more generic alpm_find_satisfier rather then the more specific and less useful alpm_deptest. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Fix a few problems reported by clang-analyzerXavier Chantry1-1/+0
One missing NULL-check and 3 dead assignments. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Ensure stdin args are correctly terminatedDan McGee1-3/+4
And don't require pm_targets to be empty to read from stdin either. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-05Support reading package args from stdinDave Reisner1-0/+33
Only occurs if no arguments were provided directly. Arguments can be separated by any amount of valid whitespace. This allows for piping into pacman from other programs or from itself, e.g.: pacman -Qdtq | pacman -Rs This is better than using xargs, as xargs will not reconnect stdin to the terminal. The above operation performed using xargs would require the --noconfirm flag to be passed to pacman. Signed-off-by: Dave Reisner <d@falconindy.com>
2010-10-14Clean up all old database files and directoriesAllan McRae1-8/+24
Clean-up the previous download location of the sync database and any old extracted sync database directories which are unneeded with the tar-db backend. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-12CLI args: stricter/better parsingJakob Gruber1-32/+45
In the following, the letters SRUDQ refer to the corresponding pacman operations. Most of the work in this commit is about removing as many options as possible from the global section and moving them to where they actually belong. Additionally, --ignore{,group} are added to U and --dbonly is added to S. --dbonly added to S --asdeps moved to S/U/D --asexplicit moved to S/U/D --print-format moved to S/U/R --noprogressbar moved to S/U/R --noscriptlet moved to S/U/R --ignorepkg added to U --ignoregrp added to U -d moved to S/U/R (--nodeps) and Q (--deps) -p moved to S/U/R (--print) and Q (--file) -f moved to S/U Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12CLI args: reorganize parsingJakob Gruber1-160/+280
Split parsing of CLI arguments into separate functions: parsearg_op (operations) parsearg_global (global options) parsearg_{database,query,remove,sync,deptest,upgrade} Organization strictly follows the manpage (even where the manpage is incorrect) - these cases will be fixed in the following commits. Switch cases are copy/pasted and statements unrelated to chosen operation are deleted. Parsing logic adjusted as follows: 1) Parse operation 2) If we can bail out early (duplicate op, help/version requested) do so 3) Parse arguments again: foreach arg: if arg is operation: continue tryparse_args_specific_to_op if unsuccessful tryparse_args_global if unsuccessful print error message and exit Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12util: fall cleaning on single file programsDan McGee4-35/+19
* Add a bunch of static declarations where possible * Fix void functions to be proper syntax, e.g. void func(void) * Consistency fixes (such as argv references) * Remove dead str_cmp() function from testdb * Remove unneeded config.h header includes * vercmp: remove completely unnecessary string copying Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Add wrapper around asprintf callsAllan McRae2-11/+28
Not checking the return value of asprintf calls reuslts in a warning when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around asprintf calls which checks the return value. Currently the check does nothing more than outputing a message to stderr on failure, but that is at least an improvement over silent failures. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-07Restore trimming of db and pkg extensionsDan McGee1-1/+1
These keep having to change because we are getting really good at changing the downloaded filename. Shorten the match sequences to just .db and .pkg and trim everything after and including these strings. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-24Fix some whitespace issuesAllan McRae1-1/+1
The combination of tabs and spaces is annoying in any editor that does not use a tab width of 2 spaces. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>