summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2010-12-13Explicitly test time difference is greater than zeroAllan McRae1-1/+1
We are comparing a floating point number so should use an inequality rather than implicitly testing != 0. Prevents warning given by -Wfloat-equal. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Display progress bar for disk space checkingAllan McRae1-0/+9
Checking disk space needed for a transaction can take a while so add an informative progress bar. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Add configuration option to control disk space checkingAllan McRae1-0/+2
Disk space checking is likely to be an unnecessary bottleneck to people with reasonable partition sizes so add a configuration option to allow it to be disabled/enabled as wanted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Remove AC_TYPE_SIGNAL usageDan McGee1-1/+1
This macro is deemed unnecessary by even the autoconf guys, so we really don't need to use it. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13dirent usage cleanupDan McGee1-1/+0
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13src/util: update .gitignoreDan McGee1-7/+8
Add pactree and sort entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pactree: use variables for color and tree outputXavier Chantry1-57/+39
This allows to very easily support non-color and linear mode, by just setting the variables to an empty string, very much like it was done in the bash script. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13pactree: separate dependency and print logicXavier Chantry1-60/+92
The deps walking code simply calls print_start, print, print_end, and all the printing logic is handled there. The unresolvable printing is disabled for now because it does not handle linear mode, and the linear and color output will be re-written. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13pactree: rewrite in CDave Reisner2-1/+362
Use the bash script in contrib as the basis for a C rewrite using libalpm. The speedup can go from dozens of seconds to less than one second. Colorized output is preserved. The --graph option generates output that graphviz's `dot' utility will understand to draw us a graph. Output is written to stdout and it is left up to the user to pipe the data and determine the output characteristics. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-13alpm/remove.c : respect --dbonly during remove-upgradeXavier Chantry1-2/+1
When a -Sk or -Uk operation induced a removal of an existing local package, --dbonly was not in effect and the files were all removed. Fixing this behavior was already marked as TODO in database012 pactest ------------ TODO: I honestly think the above should NOT delete the original les, it hould upgrade the DB entry without touching anything on the file stem. E.g. this test should be the same as: pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz ------------ Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchup] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pacman: sort --help outputXavier Chantry2-51/+99
Example with pacman -Uh : $ pacman -Uh options: -b, --dbpath <path> set an alternate database location -d, --nodeps skip dependency checks -f, --force force install, overwrite conflicting files -k, --dbonly only modify database entries, not package files -r, --root <path> set an alternate installation root -v, --verbose be verbose --arch <arch> set an alternate architecture --asdeps install packages as non-explicitly installed --asexplicit install packages as explicitly installed --cachedir <dir> set an alternate package cache location --config <path> set an alternate configuration file --debug display debug messages --ignore <pkg> ignore a package upgrade (can be used more than once) --ignoregroup <grp> ignore a group upgrade (can be used more than once) --logfile <path> set an alternate log file --noconfirm do not ask for any confirmation --noprogressbar do not show a progress bar when downloading files --noscriptlet do not execute the install scriptlet if one exists --print only print the targets instead of performing the operation --print-format <string> specify how the targets should be printed Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchups] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13CLI args: update --help and manpageXavier Chantry1-83/+81
The three parts (help, manpage and code) are now organized in the same way and much easier to compare : - specific options - install/upgrade options for -S and -U - transaction options for -S -R and -U - global options After this re-organization, it was easy to update and sync the three components together. Duplication is also avoided. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13pacman/deptest: reimplement with alpm_find_satisfierXavier Chantry1-3/+11
It's very easy to re-implement the -T feature with the more generic alpm_find_satisfier rather then the more specific and less useful alpm_deptest. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Fix a few problems reported by clang-analyzerXavier Chantry1-1/+0
One missing NULL-check and 3 dead assignments. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Ensure stdin args are correctly terminatedDan McGee1-3/+4
And don't require pm_targets to be empty to read from stdin either. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-05Support reading package args from stdinDave Reisner1-0/+33
Only occurs if no arguments were provided directly. Arguments can be separated by any amount of valid whitespace. This allows for piping into pacman from other programs or from itself, e.g.: pacman -Qdtq | pacman -Rs This is better than using xargs, as xargs will not reconnect stdin to the terminal. The above operation performed using xargs would require the --noconfirm flag to be passed to pacman. Signed-off-by: Dave Reisner <d@falconindy.com>
2010-10-14Clean up all old database files and directoriesAllan McRae1-8/+24
Clean-up the previous download location of the sync database and any old extracted sync database directories which are unneeded with the tar-db backend. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-12CLI args: stricter/better parsingJakob Gruber1-32/+45
In the following, the letters SRUDQ refer to the corresponding pacman operations. Most of the work in this commit is about removing as many options as possible from the global section and moving them to where they actually belong. Additionally, --ignore{,group} are added to U and --dbonly is added to S. --dbonly added to S --asdeps moved to S/U/D --asexplicit moved to S/U/D --print-format moved to S/U/R --noprogressbar moved to S/U/R --noscriptlet moved to S/U/R --ignorepkg added to U --ignoregrp added to U -d moved to S/U/R (--nodeps) and Q (--deps) -p moved to S/U/R (--print) and Q (--file) -f moved to S/U Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12CLI args: reorganize parsingJakob Gruber1-160/+280
Split parsing of CLI arguments into separate functions: parsearg_op (operations) parsearg_global (global options) parsearg_{database,query,remove,sync,deptest,upgrade} Organization strictly follows the manpage (even where the manpage is incorrect) - these cases will be fixed in the following commits. Switch cases are copy/pasted and statements unrelated to chosen operation are deleted. Parsing logic adjusted as follows: 1) Parse operation 2) If we can bail out early (duplicate op, help/version requested) do so 3) Parse arguments again: foreach arg: if arg is operation: continue tryparse_args_specific_to_op if unsuccessful tryparse_args_global if unsuccessful print error message and exit Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12util: fall cleaning on single file programsDan McGee4-35/+19
* Add a bunch of static declarations where possible * Fix void functions to be proper syntax, e.g. void func(void) * Consistency fixes (such as argv references) * Remove dead str_cmp() function from testdb * Remove unneeded config.h header includes * vercmp: remove completely unnecessary string copying Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Add wrapper around asprintf callsAllan McRae2-11/+28
Not checking the return value of asprintf calls reuslts in a warning when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around asprintf calls which checks the return value. Currently the check does nothing more than outputing a message to stderr on failure, but that is at least an improvement over silent failures. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-07Restore trimming of db and pkg extensionsDan McGee1-1/+1
These keep having to change because we are getting really good at changing the downloaded filename. Shorten the match sequences to just .db and .pkg and trim everything after and including these strings. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-24Fix some whitespace issuesAllan McRae1-1/+1
The combination of tabs and spaces is annoying in any editor that does not use a tab width of 2 spaces. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-24fgets invocation cleanupDan McGee1-2/+1
From the fgets manpage: fgets() reads in at most one less than size characters from stream and stores them into the buffer pointed to by s. Reading stops after an EOF or a newline. If a newline is read, it is stored into the buffer. A '\0' is stored after the last character in the buffer. This means there is no need at all to do 'size - 1' math. Remove all of that and just use sizeof() for simplicity on the buffer we plan on reading into. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Use the plural features of gettextDan McGee3-6/+15
Gettext has this whole 'Plural-Form' thing that until now we haven't taken advantage of. Given that not all languages have the same plural form rules as English, take advantage of it by defining a new _n() macro which will normally define to ngettext(), and adjust a few messages as an example of how to use. There are surely other places where we do singular/plural logic without me having noticed, so further patches are welcome to fix those up too. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Merge branch 'maint'Dan McGee1-0/+1
2010-07-27Fix compile error in certain casesDan McGee1-0/+1
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for umask and mkdir in this file. I hit this today: cc1: warnings being treated as errors util.c: In function ‘makepath’: util.c:128:2: error: implicit declaration of function ‘umask’ util.c:141:5: error: implicit declaration of function ‘mkdir’ make[2]: *** [util.o] Error 1 Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-01Check return value of chdir and getcwdAllan McRae1-2/+13
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-30Do not compare signed and unsigned typesAllan McRae1-1/+1
The casting of nread is safe as it is tested to be >0 when it is initally assigned. It is also being implicitly cast in the fwrite call in the line above. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-20Clarify testing within conditional statementsAllan McRae6-11/+11
Follow the HACKING guidelines and always use != 0 or == 0 rather than negation within conditional statements to improve clarity. Most of these are !strcmp usages which is the example of what not to do in the HACKING document. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-06-05Remove unnecessary gettext callDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18Allow to include a path containing wildcardsMarc-A. Dahlhaus1-2/+29
Dan: line wrapping and man page touchup. Signed-off-by: Marc-A. Dahlhaus <mad@wol.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18Allow Include directive in any sectionsXavier Chantry1-12/+16
Fix a regression of 51f9e5e40a7 that only allowed Include in repo sections. Thanks to Marc - A. Dahlhaus for reporting the issue. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-11Allow -Qo to perform a functional 'which'Allan McRae1-5/+59
When pacman queries the ownership of an object that is not a path, it will check in the users PATH for a match. Implements FS#8798. Dan: did some small refactoring and error message changes when PATH is searched and nothing is found. Original-patch-by: Shankar <jatheendra@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Improve documentation of -k/--dbonlyDan McGee1-1/+2
We had the long option wrong in some places and its behavior wasn't documented at all with regards to -U/--upgrade. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Remove unused 'z' option from getopt_long's optstringNagy Gabor1-1/+1
In addition, I permuted shortopts to make it more readable. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Introduce -D, --databaseNagy Gabor6-6/+113
The request of FS#12950 is implemented. On the backend side, I introduced a new function, alpm_db_set_pkgreason(), to modify the install reason of a package in the local database. On the front-end side, I introduced a new main operation, -D/--database, which has two options, --asdeps and --asexplicit. I documented this in pacman manual. I've created two pactests to test -D: database001.py and database002.py. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Build vercmp without needing link to libalpmDan McGee2-3/+5
Include the object file directly from the libalpm version comparison code as it is the only thing we need. This drops the dependency of vercmp on libalpm and all of the stuff we know it drags in. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-04-26check for valid optarg before using strdupSerge Ziryukin1-0/+1
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-26Show --print and --print-format options with -Rh, -Sh and -Uh onlyNagy Gabor1-3/+9
http://mailman.archlinux.org/pipermail/pacman-dev/2010-March/010519.html Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-24Show 'Required By' in -Sii outputDan McGee3-11/+13
Just as we do in -Qi, we can compute required by information for sync database packages. The behavior seems sane; for a given package, the -Sii required by will show all packages in *any* sync database that require it. Implements FS#16244. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-19Strip extension off all package compression typesDan McGee1-1/+1
Since we were searching for '.pkg.tar.gz' before, we now have started to show extensions during the download when we have a '.pkg.tar.xz' package. Just look for '.pkg.tar.' (or '.db.tar.') instead and suppress anything found from that point on. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Bump copyright dates to 2010Dan McGee17-18/+18
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15fix a few warnings reported by clangXavier Chantry3-3/+5
- remove unused variables - some more sanity checks - safer printf Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Mark two functions staticDan McGee1-2/+2
These were just introduced in the `--print` patch, and don't need to be exposed outside of util.c. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Add new --print operation for all operationsXavier Chantry8-40/+151
And a new --print-format option to configure the output. This implements FS#14208 Example usage : pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15print installed packagesXavier Chantry1-2/+22
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15callback: use variable length for progressbar textXavier Chantry1-4/+15
This fixes FS#17523 We always used a fixed value of 50 for textlen, which is often not enough for download progress bar. At least we can use a bigger width on large terminal (e.g. 60% of width) and keep 50 as minimum. before: nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100% after: nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100% Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15callback.c : less magic progress barsXavier Chantry1-10/+13
1 - Explain magic numbers 2 - There was a weird off by 1 mess in the progress bar. The code supposedly shared the width between 50 chars for text (textlen) and the rest for the progress bar (proglen = getcols() - textlen). But the code actually used textlen + 1 for the text and proglen - 1 for the progress bar (with haslen=1, the progress bar was actually empty), which was a bit confusing so I changed it. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15delta : add external cleanup scriptXavier Chantry3-1/+142
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>