Age | Commit message (Collapse) | Author | Files | Lines |
|
The test introduced herein illustrates a behavior that may be unexpected
to package writers.
It creates a package "pkg3" that is configured to depend on a
"dependency" which version is between 3 and 4, inclusive. Two other
packages are already present, providing "dependency" in version 2 and 5,
respectively. So, the situation looks roughly like this:
pkg1 pkg3 pkg2
provides depends on provides
| <------------> |
version __________2____________3____________4____________5___________...
This seems to be enough to satisfy pacman when installing "pkg3". From
an iterative standpoint, this is completely logical: First, the
requirement "dependency>=3" is checked. There is a package that
satisfies this restriction, it is called "pkg2". Afterwards,
"dependency<=4" is covered in the same way by "pkg1".
Nonetheless, what a package writer intends when specifying
depends=('dependency>=3' 'dependency<=4')
is most probably that pacman should only allow this package to be
installed when there indeed is a package present that provides a version
of "dependency" that lies _between_ 3 and 5.
Signed-off-by: Dominik Fischer <d dot f dot fischer at web dot de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When replacing a file with a directory, any files inside the new
directory cannot possibly exist on the filesystem and can be skipped.
This allows cross-package symlink-to-directory transitions when there
are files with the same name under both the symlinked directory and the
new directory.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a symlink to a directory is changing to a directory, any package file
inside the new directory can create an unexpected conflict with the filesystem.
Reported by Neofytos and Luca from Chakra.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Paths from noupgrade, the transaction skip_remove, and package backup
lists were combined into a single list matched using fnmatch causing
paths with glob characters to match unrelated files.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
LIBCURL was never set in the Makefile so XferCommand was always being
set in the test file. This removes the only substitution in our test
files which will prevent the TESTS file from being rebuilt every time
configure is run.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Leave user files in place and save new config files with a .pacnew
extension. This reduces the complexity of file extraction and respects
the principle that pacman shouldn't modify files it didn't create.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows to ignore specific dependencies.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
If a directory has been replaced by a symlink, -Qk currently stats the
symlink target rather than the symlink itself and doesn't check that the
actual file type matches the package file list. This will make it
difficult to discover errors once 4.2 is released and replacing
directories with symlinks is no longer supported.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
This test currently fails.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Matches the behavior for sync packages.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
"Always" is not a valid siglevel. sign002.py was succeeding because
pacman failed to parse the resulting config file rather than a failed
signature check.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The user requesting usage or version information is not an error.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The -Qk test (001) validates the existence of the package files (which
were installed to the filesystem by the framework because the package
was added to the "local" db).
The -Qkk test (002) does not validate any file's properties - it can
only check that the pacman run produces the expected warning message
saying that the package lacks an mtree.
Further tests will require modifications to the testing framework to
allow intentional damage to the filesystem and generating an mtree.
Signed-off-by: Jeremy Heiner <ScalaProtractor at gmail.com>
[Allan] Make warning message detection more specific
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packages can be removed during a sync transaction either directly or
due to conflicts and need to be sorted.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
I've tracked this back to e223366 and it looks like this just forces KiB
because back then humanize_size didn't exist, but the size was just
divided by 1024 to keep it somewhat readable. When humanize_size got
introduced in 3c8a448 this was just carried over.
The unit detected for "Download Size" is reused for "Installed Size" to
make it easier to read.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Detecting indirect dependencies by traversing a package's entire
dependency tree is prohibitively slow for larger transactions. Instead
add local packages to the dependency graph. This additionally requires
delaying dependency ordering for sync operations so that removed
packages may be excluded from dependency detection.
tests/sync012.py was also updated to ensure that the dependency cycle
was actually detected.
Fixes FS#37380
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Reported by 2to3: optional in Python 2, but required in 3.
Signed-off-by: Jeremy Heiner <ScalaProtractor@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Reported by 2to3. Python 3 throws out the old range, renames the old
xrange to be the new range, leaving no xrange. A shim could be used,
but using the less efficient version does not have a noticeable impact
on the run time. This observed (lack of an) effect is as described in
the Python 2 docs for xrange. The largest range created is only 1000
elements big, and the memory cost of those ranges is negligible when
compared to that of all the pmpkg instances created.
Signed-off-by: Jeremy Heiner <ScalaProtractor at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This causes make to update TESTS when tests are added (or updated).
For simplicity, this changes TESTS from a single multi-line list to
individually appending each test file.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
[Allan: use C locale for sorting]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This defines a level of interest a user has in a repository. These are
described by the bitmask flags in the alpm_db_usage_t enum:
ALPM_DB_USAGE_SEARCH: repo is valid for searching
ALPM_DB_USAGE_INSTALL: repo is valid for installs (e.g. -S pkg)
ALPM_DB_USAGE_UPGRADE: repo is valid for sysupgrades
ALPM_DB_USAGE_ALL: all of the above are valid
Explicitly listing the contents of a repo will always be valid, and the
repo will always be refreshed appropriately on sync operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* append "/" to directories before searching package file lists
* use lstat over stat so symlinks aren't resolved
* fix the inverted check for stat's return value
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use the architecture of the python interpreter running the test to
detect 32bit systems.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Using setlocale in the backend is bound to lead to frontend issues
and we have have been using epoch in our databases since April 2007
(commit 47622eef). Remove support for old style times.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On upgrades, indirect dependencies were not being detected if there was
a dependency in between them that was not part of the transaction. For
example, with the dependency chain: pkg1 -> pkg2 -> pkg3, if pkg1 and
pkg3 are being upgraded but not pkg2 pacman would not order pkg1 and
pkg3 properly.
This was particularly problematic when replacements were involved
because the replaced package(s) would be removed at the start of the
transaction. If an install script required the replacer and lacked
a direct dependency, it could fail.
Fixes FS#32764.
Partially fixes FS#23011.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packages removed due to conflicts are always removed at the beginning of
the transaction and as such can be included in the check for whether all
owners of a directory will be removed in a transaction. Installed
versions of packages being upgraded, other than the one with the
conflict, cannot be used because our transaction ordering is not
intelligent enough to ensure that they are removed prior to the
installation of the conflicted package.
Also, return false from dir_belongsto_pkgs on errors. Previously, we
simply continued which could return true even if we were unable to
actually establish that the package owned the entire tree.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
After the initial checks, we either use the path as a directory and have
to append the trailing slash anyway or use it as a file in which case
the trailing slash should be excluded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Remove a question that hasn't been used since the 3.0 days. To prevent
us from having an ugly enum of questions that is missing a bitmask, this
changes the API of the hidden --ask option.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since 882bff36 literals would be searched before replacers, resulting in a
package being replaced by another not actually being replaced under certain
conditions (e.g. they're both in the same repo).
This change effectively reversed the expectations in test sync132. This patch
switches the order back to replacers first, thus making sure if a package is
replacing another one, the change will always happen, even if both are in the
same repo.
Note that a package replacing another one in a repo with higher priority will
not be done, see FS#11737 and test sync1105
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
During a sysupgrade, if a package is replaced by another, and an update for the
former package is found (on another repo) the replaced package would be
re-installed.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_filelist_contains was being used to search for resolved paths, but
searching in the unresolved paths, causing it to miss matches. We
always search unresolved paths and search the resolved paths if
available because _alpm_filelist_resolve is not public and requires
a context handle, so it can't be called from alpm_filelist_contains.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were comparing files based on resolved paths but returning the
original file_t structures, which were not necessarily in the same
order. The extra file_t information was only being used to determine if
the file was a directory which can be accomplished by testing for
a trailing slash, so just return the resolved path.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were comparing files based on resolved paths but returning the
original file_t structures, which were not necessarily in the same
order. The additional file_t information was never used, so just return
the resolved path.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|