.TH FrugalBuild 8 "June 13, 2006" "Frugalware Developer Manual" "" .SH NAME FrugalBuild \- Frugalware package builder descriptor .SH DESCRIPTION This manual page is meant to describe general rules about FrugalBuilds. If you're interested in the package builder \fBmakepkg\fP itself, then see its manual page, not this one. .TP .TP .SH FrugalBuild Example: .RS .nf # Last Modified: Sun, 19 Jun 2005 15:24:32 +0000 # Compiling Time: 0.17 SBU # Maintainer: Name <email@addr.ess> pkgname=dvdauthor pkgver=0.6.11 pkgrel=3 pkgdesc="Will generate a DVD movie from a valid mpeg2 stream" depends=('imagemagick' 'libdvdread') Finclude sourceforge groups=('xapps') archs=('i686' 'x86_64') sha1sums=('a99ea7ef6e50646b77ad47a015127925053d34ea') # optimization OK .fi .RE As you can see, the setup is fairly simple. The first line tracks the time of the last update, this is automatically updated after a successful build. The next line defines its build time. Of course, it depends on your hardware, so we use SBUs instead of minutes as a unit. SBU is the Static Binutils Unit, which means the time "repoman merge binutils" takes on your machine. By default makepkg will print out how many seconds the build took. After you built binutils, you should update your /etc/makepkg.conf: SBU="257" The line above means compiling binutils on your machine took 257 seconds. Starting from this point, makepkg will print out SBUs instead of seconds after successful builds, and this SBU value will be equal on anyone's machine. If you wish to maintain the package, write your name or nick and e-mail address to the third line. If you don't plan to maintain the package just wrote the FrugalBuild, then write Contributor instead of Maintainer, and then someone can take it and will add his/her line later. Other lines like "Modified by" are not allowed. Use the darcs patch comments to mention others if you wish. pkgname defines the package name. It should not contain any uppercase letters. The package version defines the upstream version, while the package release tracks the Frugalware-specific changes. pkgrel should be an integer, pkgrels like 5wanda1 are reserved for security updates. There the rule is the following: If the original package's pkgrel was 4, then increment it once when you add a security patch, but then use 5wanda1, 5wanda2 and so on. This way the user can easily upgrade to pkgrel=5 which is in -current. pkgdesc is a short one-line description for the package. Usually taken from the project's homepage or manpage. Try to keep the lenght under 80 chars. depends() is a bash array which defines the dependencies of the package. depends() means the other package is required for building and using the current one. If the dependency is runtime-only, then use rodepends(), if buildtime-only then use makedepends(). The next line is a special Finclude commands which allows you to inherit any directive from a FrugalBuild scheme. They can be found in the FST, under /source/include. The "util" scheme always included, since its provided functions are used by almost every FrugalBuild. Look at the /source/include/sourceforge.sh, it provides the url, up2date and source() directives, so we don't have to specify them here. After the Finclude you can overwrite the inherited directives, for example define a custom up2date if the inherited one is not sutable for you. The groups() array's first element can't be omitted, and it should be a valid "first group". This means it should be in a foo or foo-extra format, where foo or foo-extra is a dir under /source in the FST. The archs() array defines for which architectures the given package is available. If it's not available, it means that gensync will skip it when generating package databases. If you are not able to provide a binary package for a given arch, don't include that in archs()! For example, no matter if the package could be compiled in x86_64, if you haven't compiled it yourself, don't include it. If you're sure it won't be available on a given arch (for example it's written in x86 asm), then use !arch, for example !x86_64. The sha1sums() array can be generated with the makepkg -g command. Its purpose is to prevent compiling from wrong sources, especially when the build is automatic. Where it is available you can use signatures(), its goal is that you don't have to update it manually every time. The last line will be added automatically to the end of the FrugalBuild if the build() function used your $CFLAGS or $CXXFLAGS. This is handy if you want to cross-compile on a faster machine for a slower architecture. Until the package doesn't use our $CFLAGS we can't cross-compile it, so please try to avoid creating "unoptimized" packages. If the package doesn't contain any architecture-dependent file, then you can add this line manually as makepkg will not detect this. Finally we define a build() function that will build the package. If you don't want to do anything special, probably you don't have to specify anything, as the default build() (inherited from util.sh) will fit your needs. Even if you define a custom build(), probably you can re-use parts of the default build(). For the list of special functions provided by util.sh and others refer to the /source/include dir. Again, util.sh is included automatically, but you have to Finclude the others before using them! Once the package is successfully installed into the package root, \fImakepkg\fP will prepare some documentation. It will then strip debugging info from libraries and binaries and generate a meta-info file. Finally, it will compress everything into a .fpm file and leave it in the directory you ran \fBmakepkg\fP from. At this point you should have a package file in the current directory, named something like name-version-release-arch.fpm. Done! .SH Install/Upgrade/Remove Scripting Pacman has the ability to store and execute a package-specific script when it installs, removes, or upgrades a package. This allows a package to "configure itself" after installation and do the opposite right before it is removed. The exact time the script is run varies with each operation: .TP .B pre_install script is run right before files are extracted. .TP .B post_install script is run right after files are extracted. .TP .B pre_upgrade script is run right before files are extracted. .TP .B post_upgrade script is run after files are extracted. .TP .B pre_remove script is run right before files are removed. .TP .B post_remove script is run right after files are removed. .RE To use this feature, just create a file (eg, pkgname.install) and put it in the same directory as the FrugalBuild script. Then use the \fIinstall\fP directive: .RS .nf install=pkgname.install .fi .RE The install script does not need to be specified in the \fIsource\fP array. If you omit the install directive then makepkg will check for the $pkgname.install install and will use it if it's present. You can find a scriptlet skeleton in the /docs/tech/skel/ directory, use it when creating new packages. The scriptlet messages are parsed, a simple example tells you everything: .nf post_upgrade() { echo "START this will be good" echo "DONE 0" echo "START this will fail" echo "DONE 1" echo "old message" } .fi .SH FrugalBuild Directives .TP .B pkgname The name of the package. This has be a unix-friendly name as it will be used in the package filename. .TP .B pkgver This is the version of the software as released from the author (eg, 2.7.1). .TP .B pkgrel This is the release number specific to Frugalware Linux packages. .TP .B pkgdesc This should be a brief description of the package and its functionality. .TP .B pkgdesc_localized Array of the localized package descriptions. The format is the following: pkgdesc_localized=('xx_YY foo' 'xx_YY bar') .TP .B url This field contains an optional URL that is associated with the piece of software being packaged. This is typically the project's website. .TP .B license Sets the license type (eg, "GPL", "BSD", "NON-FREE"). (\fBNote\fP: This option is still in development and may change in the future) .TP .B install Specifies a special install script that is to be included in the package. This file should reside in the same directory as the FrugalBuild, and will be copied into the package by makepkg. It does not need to be included in the \fIsource\fP array. (eg, install=modutils.install) .TP .B up2date This directive should contain a command that prints the current upstream stable version of the project. This way we can check for newer version without visiting manually the project's website (see above). .TP .B source \fI(array)\fP The \fIsource\fP line is an array of source files required to build the package. Source files must reside in the same directory as the FrugalBuild file, unless they have a fully-qualified URL. Then if the source file does not already exist in /var/cache/pacman/src, the file is downloaded by wget. .TP .B md5sums \fI(array)\fP If this field is present, it should contain an MD5 hash for every source file specified in the \fIsource\fP array (in the same order). makepkg will use this to verify source file integrity during subsequent builds. To easily generate md5sums, first build using the FrugalBuild then run \fBmakepkg -G >>FrugalBuild\fP. Then you can edit the FrugalBuild and move the \fImd5sums\fP line from the bottom to an appropriate location. .TP .B sha1sums \fI(array)\fP If this field is present, it should contain an SHA1 hash for every source file specified in the \fIsource\fP array (in the same order). makepkg will use this to verify source file integrity during subsequent builds. To easily generate sha1sums, first build using the FrugalBuild then run \fBmakepkg -g >>FrugalBuild\fP. Then you can edit the FrugalBuild and move the \fIsha1sums\fP line from the bottom to an appropriate location. .TP .B signatures \fI(array)\fP If this field is present, it should contain an array of gpg signatures required to validate the source files. Where there is no signature available just leave it empty, like: signatures=(${source[0]}.asc '') .TP .B groups \fI(array)\fP This is an array of symbolic names that represent groups of packages, allowing you to install multiple packages by requesting a single target. For example, one could install all KDE packages by installing the 'kde' group. .TP .B archs \fI(array)\fP This array defines on which architectures the given package is avalibable. If it's not available, that will mean that gensync will skip it when generating package databases. .TP .B backup \fI(array)\fP A space-delimited array of filenames (without a preceding slash). The \fIbackup\fP line will be propagated to the package meta-info file for pacman. This will designate all files listed there to be backed up if this package is ever removed from a system. See \fBHANDLING CONFIG FILES\fP in the \fIpacman\fP manpage for more information. .TP .B depends \fI(array)\fP An array of packages that this package depends on to build and run. Packages in this list should be surrounded with single quotes and contain at least the package name. They can also include a version requirement of the form \fBname<>version\fP, where <> is one of these three comparisons: \fB>=\fP (greater than equal to), \fB<=\fP (less than or equal to), or \fB=\fP (equal to). See the FrugalBuild example above for an example of the \fIdepends\fP directive. .TP .B makedepends \fI(array)\fP An array of packages that this package depends on to build (ie, not required to run). Packages in this list should follow the same format as \fIdepends\fP. .TP .B rodepends \fI(array)\fP An array of packages that this package depends on to run (ie, not required to build). Generally \fIrodepends\fP should be avoided in favour of \fIdepends\fP except where this will create circular dependency chains. (For example building logrotate doesn't requires to have dcron installed.) Packages in this list should follow the same format as \fIdepends\fP. .TP .B conflicts \fI(array)\fP An array of packages that will conflict with this package (ie, they cannot both be installed at the same time). This directive follows the same format as \fIdepends\fP except you cannot specify versions here, only package names. .TP .B provides \fI(array)\fP An array of "virtual provisions" that this package provides. This allows a package to provide dependency names other than it's own package name. For example, the kernel-scsi and kernel-ide packages can each provide 'kernel' which allows packages to simply depend on 'kernel' rather than "kernel-scsi OR kernel-ide OR ..." .TP .B replaces \fI(array)\fP This is an array of packages that this package should replace, and can be used to handle renamed/combined packages. For example, if the kernel package gets renamed to kernel-ide, then subsequent 'pacman -Syu' calls will not pick up the upgrade, due to the differing package names. \fIreplaces\fP handles this. .TP .B options \fI(array)\fP This is an array of various boolean options. The possible values are: .nf nodocs Don't add any documentation automatically (ie. when there'll be a separate documentation subpackage). nostrip Don't strip binaries/libraries. force This is used to force the package to be upgraded by --sysupgrade, even if its an older version. nobuild If this directive set, gensync will ignore this package, so users must build these packages on their machines, they will not be able to install them with pacman -S. Useful for closed-source, but freeware programs. nofakeroot Don't drop privileges after chrooting. Required by some broken packages. scriptlet Don't skip executing scriptlets even if we're in chroot. .fi .SH What is the process of chrooted build ? First, what is chroot? We currently use fakeroot to prevent build() from modifying the host system, and we use a prefix or DESTDIR directive to install everything to a directory and not under to the host system. This is good, but not enough. This system lacks of the ability to control the list of installed packages during the build on the system of a packager, the given compiled package maybe linked itself to an extra installed library. This way we can't really control the list of real dependencies. For example if libquicktime is installed from source on my system, then mplayer or any other program can link itself to that, and so that depends() will be incorrect. Or if I have the closed source binary NVidia drivers installed, some programs link tho NVidia's libraries. Of course there is a sollution to avoid this, to use a real chroot instead of a simple fakeroot. What is this means? The followings: When starting the build, a core chroot system is installed under /var/chroot. (Of course you can change this value under /etc/makepkg.conf.) The core system contains ~60 packages which are must installed to build any package in a chrooted environment. These packages (for example gcc, kernel-headers, make) should not be mentioned in makedepends(). 'pacman -Sg core chroot-core devel-core' should show you the actial list. (We try to change this list rarely of course.) When you start building with makepkg -R, pacman will install these packages to /var/chroot if necessary. This will produce a fully "clean" Frugalware system, that consits of base packages only. This /var/chroot is fully separated from the host system so that this will solve the problems mentioned above. (Linking to a library installed from source, etc.) Here comes the fun part. The packages listed in depends() and makedepends() are installed to this clean (/var/chroot) system. From this point, this chroot is capable to build the specified package in it without any unnecessary package installed, fully separated from the host system. After this the chroot should be cleaned up which means the removal of the installed depends() and makedepends(). This ensures us not to build from scratch the core chroot. This way we can prevent lots of dependency problems and it is even possible to build packages for a different Frugalware version. This is quite efficent when building security updates or fixing critical bugs in the -stable tree. If the build is failed, the working directory will not be deleted, you can find it under /var/chroot/var/tmp/fst. Later if you want to clean your chroot (delete the working directory and remove unnecessary packages) you can use 'makepkg -CR'. To activate building in a chroot, you should run makepkg as root at least with the -R option. .SH Package splitting Package splitting means moving out a list of specifed files to subpackages (like libmysql out of mysql) and then defining the properties of subpackages. NOTE: if you create several subpackages, maintaining those packages will require more and more time. Thus, unnecessary splits aren't welcome. Especially, if you split out a library, then don't move the headers to the package just to speed up building with a few seconds! The \fBsubpkgs()\fP array is to define the pkgnames of the subpackages. From now all the directives has their subfoo equivalent: .nf pkgname -> subpkgs() pkgdesc -> subdescs() pkgdesc_localized -> subdescs_localized() license() -> sublicense() replaces() -> subreplaces() groups() -> subgroups() depends() -> subdepends() rodepends() -> subrodepends() removes() -> subremoves() conflicts() -> subconflicts() provides() -> subprovides() backup() -> subbackup() install -> subinstall() options -> suboptions() archs -> subarchs() .fi Also note that bash does not support two-dimensional arrays, so when defining the array of arrays, then quotes are the major separators and spaces are the minor ones. Simple example: .nf Add the followings to your bottom of your FrugalBuild subpkgs=('foo' 'bar') subdescs=('desc of foo' 'desc of bar') subdepends=('foodep1 foodep2' 'bardep1 bardep2') subgroups=('apps' 'apps') subarchs=('i686 x86_64' 'i686 x86_64') .fi You may define conflicts, replaces and other directives for your subpackages, but the requirement is only to define these 5 ones. The second part is to move some files to the - just defined - subpackages. You should use the Fsplit command for this at the end of your build() function. You can read more about Fsplit in the fwmakepkg documentation, but here is a short example: .nf Fsplit subpkgname usr/share/ .fi This will move the /usr/share dir of the package to the "subpkgname" subpackage. NOTE: never use a trailing slash when defining file patterns, especially if you use wildcards in it! .SH "SEE ALSO" .BR makepkg (8), .BR pacman (8) .SH AUTHOR .nf Judd Vinet <jvinet@zeroflux.org> and the Frugalware developers <frugalware-devel@frugalware.org> .fi