///// vim:set ts=4 sw=4 syntax=asciidoc noet: ///// pacman(8) ========= Name ---- pacman - package manager utility Synopsis -------- 'pacman' [options] [packages] Description ----------- Pacman is a package management utility that tracks installed packages on a Linux system. It features dependency support, package groups, install and uninstall hooks, and the ability to sync your local machine with a remote ftp server to automatically upgrade packages. Pacman packages are a zipped tar format. Since version 3.0.0, pacman has been the frontend to linkman:libalpm[3], the "Arch Linux Package Management" library. This library allows alternative front ends to be written (for instance, a GUI front end). Operations ---------- *-A, \--add* (deprecated):: Add a package to the system. Either a URL or file path can be specified. The package will be uncompressed into the installation root and the database will be updated. The package will not be installed if another version is already installed. *NOTE*: please use '\--upgrade' in place of this option. *-Q, \--query*:: Query the package database. This operation allows you to view installed packages and their files, as well as meta-information about individual packages (dependencies, conflicts, install date, build date, size). This can be run against the local package database or can be used on individual '.tar.gz' packages. See <> below. *-R, \--remove*:: Remove a package from the system. Groups can also be specified to be removed, in which case every package in that group will be removed. Files belonging to the specified package will be deleted, and the database will be updated. Most configuration files will be saved with a `.pacsave` extension unless the '\--nosave' option is used. See <> below. *-S, \--sync*:: Synchronize packages. Packages are installed directly from the ftp servers, including all dependencies required to run the packages. For example, `pacman -S qt` will download and install qt and all the packages it depends on. If a package name exists in more than one repo, the repo can be explicitly specified to clarify the package to install: `pacman -S testing/qt`. + In addition to packages, groups can be specified as well. For example, if gnome is a defined package group, then `pacman -S gnome` will install every package in the gnome group, as well as the dependencies of those packages. + Packages which provide other packages are also handled. For example, `pacman -S foo` will first look for a foo package. If foo is not found, packages which provide the same functionality as foo will be searched for. If any package is found, it will be installed. + You can also use `pacman -Su` to upgrade all packages that are out of date. See <> below. *-U, \--upgrade*:: Upgrade or add a package to the system. Either a URL or file path can be specified. This is a "remove-then-add" process. See <> for an explanation on how pacman takes care of config files. *-V, \--version*:: Display version and exit. *-h, \--help*:: Display syntax for the given operation. If no operation was supplied then the general syntax is shown. Options ------- *\--asdeps*:: Install packages non-explicitly; in other works, fake their install reason to be installed as a dependency. This is useful for makepkg and other build from source tools that need to install dependencies before building the package. *-b, \--dbpath* <'path'>:: Specify an alternative database location (a typical default is ``/var/lib/pacman''). This should not be used unless you know what you are doing. *NOTE*: if specified, this is an absolute path and the root path is not automatically prepended. This behavior changed in pacman 3.1.0. *-d, \--nodeps*:: Skips all dependency checks. Normally, pacman will always check a package's dependency fields to ensure that all dependencies are installed and there are no package conflicts in the system. *-f, \--force*:: Bypass file conflict checks and overwrite conflicting files. If the package that is about to be installed contains files that are already installed, this option will cause all those files to be overwritten. This option should be used with care, ideally not at all. *-r, \--root* <'path'>:: Specify an alternative installation root (default is ``/''). This should not be used as a way to install software into ``/usr/local'' instead of ``/usr''. This option is used if you want to install a package on a temporary mounted partition which is "owned" by another system. *NOTE*: If database path or logfile are not specified on either the command line or in linkman:pacman.conf[5], their default location will be inside this root path. *-v, --verbose*:: Output paths such as as the Root, Conf File, DB Path, Cache Dirs, etc. *\--cachedir* <'dir'>:: Specify an alternative package cache location (a typical default is ``/var/cache/pacman/pkg''). Multiple cache directories can be specified, and they are tried in the order they are passed to pacman. *NOTE*: this is an absolute path, the root path is not automatically prepended. This behavior changed in pacman 3.1.0. *\--config* <'file'>:: Specify an alternate configuration file. *\--logfile* <'file'>:: Specify an alternate log file. This is an absolute path, regardless of the installation root setting. *\--noconfirm*:: Bypass any and all "Are you sure?" messages. It's not a good idea to do this unless you want to run pacman from a script. *\--noprogressbar*:: Do not show a progress bar when downloading files. This can be useful for scripts that call pacman and capture the output. *\--noscriptlet*:: If an install scriptlet exists, do not execute it. Do not use this unless you know what you are doing. Query Options[[QO]] ------------------- *-c, \--changelog*:: View the ChangeLog of a package. Not every package will provide one but it will be shown if available. *-d, \--deps*:: List all packages installed as dependencies. This option can be combined with '-t' for listing real orphans- packages that were installed as dependencies but are no longer required by any installed package. ('-Qdt' is equivalent to the pacman 3.0.X '-Qe' option.) *-e, \--explicit*:: List all packages explicitly installed. This option can be combined with '-t' to list top-level packages- those packages that were explicitly installed but are not required by any other package. ('-Qet' is equivalent to the pacman 2.9.X '-Qe' option.) *-g, \--groups*:: Display all packages that are members of a named group. If a name is not specified, list all grouped packages. *-i, \--info*:: Display information on a given package. The '-p' option can be used if querying a package file instead of the local database. Passing two '\--info' or '-i' flags will also display the list of backup files and their modification states. *-l, \--list*:: List all files owned by a given package. Multiple packages can be specified on the command line. *-m, \--foreign*:: Restrict or filter output to packages that were not found in the sync database(s). Typically these are packages that were downloaded manually and installed with '\--upgrade'. *-o, \--owns* <'file'>:: Search for the package that owns file. The path can be relative or absolute. *-p, \--file*:: Signifies that the package supplied on the command line is a file and not an entry in the database. The file will be decompressed and queried. This is useful in combination with '\--info' and '\--list'. *-s, \--search* <'regexp'>:: This will search each locally-installed package for names or descriptions that match `regexp`. *-t, \--unrequired*:: Restrict or filter output to packages not required by any currently installed package. *-u, \--upgrades*:: Lists all packages that are out of date on the local system. This option works best if the sync database is refreshed using '-Sy'. Remove Options[[RO]] -------------------- *-c, \--cascade*:: Remove all target packages, as well as all packages that depend on one or more target packages. This operation is recursive, and must be used with care since it can remove many potentially needed packages. *-k, \--keep*:: Removes the database entry only. Leaves all files in place. *-n, \--nosave*:: Instructs pacman to ignore file backup designations. Normally, when a file is removed from the system the database is checked to see if the file should be renamed with a ``.pacsave'' extension. *-s, \--recursive*:: Remove each target specified including all of their dependencies, provided that (A) they are not required by other packages; and (B) they were not explicitly installed by the user. This operation is recursive and analogous to a backwards '\--sync' operation, and helps keep a clean system without orphans. Sync Options[[SO]] ------------------ *-c, \--clean*:: Remove packages that are no longer installed from the cache as well as currently unused sync databases to free up disk space. When pacman downloads packages, it saves them in a cache directory. In addition, databases are saved for every sync DB you download from, and are not deleted even if they are removed from the configuration file linkman:pacman.conf[5]. Use one '\--clean' switch to only remove packages that are no longer installed; use two to remove all packages from the cache. In both cases, you will have a yes or no option to remove packages and/or unused downloaded databases. *-e, \--dependsonly*:: Install all dependencies of a package, but not the specified package itself. This is pretty useless and we're not sure why it even exists. *-g, \--groups*:: Display all the members for each package group specified. If no group names are provided, all groups will be listed; pass the flag twice to view all groups and their members. *-i, \--info*:: Display dependency and other information for a given package. This will search through all repositories for a matching package. *-l, \--list*:: List all packages in the specified repositories. Multiple repositories can be specified on the command line. *-p, \--print-uris*:: Print out URIs for each package that will be installed, including any dependencies yet to be installed. These can be piped to a file and downloaded at a later time, using a program like wget. *-s, \--search* <'regexp'>:: This will search each package in the sync databases for names or descriptions that match `regexp`. *-u, \--sysupgrade*:: Upgrades all packages that are out of date. Each currently-installed package will be examined and upgraded if a newer package exists. A report of all packages to upgrade will be presented and the operation will not proceed without user confirmation. Dependencies are automatically resolved at this level and will be installed/upgraded if necessary. *-w, \--downloadonly*:: Retrieve all packages from the server, but do not install/upgrade anything. *-y, \--refresh*:: Download a fresh copy of the master package list from the server(s) defined in linkman:pacman.conf[5]. This should typically be used each time you use '\--sysupgrade' or '-u'. Passing two '\--refresh' or '-y' flags will force a refresh of all package lists even if they are thought to be up to date. *\--needed*:: Only install the targets that are not already installed and up-to-date. *\--ignore* <'package'>:: Directs pacman to ignore upgrades of package even if there is one available. Multiple packages can be specified by separating them with a comma. *\--ignoregroup* <'group'>:: Directs pacman to ignore upgrades of all packages in 'group' even if there is one available. Multiple groups can be specified by separating them with a comma. Handling Config Files[[HCF]] ---------------------------- Pacman uses the same logic as rpm to determine action against files that are designated to be backed up. During an upgrade, 3 md5 hashes are used for each backup file to determine the required action: one for the original file installed, one for the new file that's about to be installed, and one for the actual file existing on the filesystem. After comparing these 3 hashes, the follow scenarios can result: original=X, current=X, new=X:: All three files are the same, so overwrites are not an issue Install the new file. original=X, current=X, new=Y:: The current file is the same as the original but the new one differs. Since the user did not ever modify the file, and the new one may contain improvements or bugfixes, install the new file. original=X, current=Y, new=X:: Both package versions contain the exact same file, but the one on the filesystem has been modified. Leave the current file in place. original=X, current=Y, new=Y:: The new file is identical to the current file. Install the new file. original=X, current=Y, new=Z:: All three files are different, so install the new file with a '.pacnew' extension and warn the user. The user must then manually merge any necessary changes into the original file. Configuration ------------- See linkman:pacman.conf[5] for more details on configuring pacman using the 'pacman.conf' file. See Also -------- linkman:pacman.conf[5], linkman:makepkg[8], linkman:libalpm[3] include::footer.txt[]