=head1 NAME smokeping_install - How to install SmokePing =head1 OVERVIEW This document explains how to setup SmokePing at your site. =head1 DESCRIPTION =head2 Prerequisites SmokePing does not stand alone. It relies on various other tools and services being present. Apart from a Unix OS and a working Perl installation you need the following components: =over =item RRDtool 1.2.x or later Smokeping uses RRDtool for logging and graphing. If you linux distro provides an rrdtool package with perl support, use this. If you want to get the latest and greates version, compile your own: L =item FPing (optional) The official site L seems to be a bit unmaintained. You might want to grab an updated version of fping from L. Note that fping must be installed setuid root. It seems that older versions of fping report round trip times in 0.1 milliseconds instead of 1 milliseconds as advertised ... SmokePing tries to figure this out. It tells you when it starts ... let me know it it gets it wrong. =item EchoPing (Optional) L You need this to run the EchoPing probes =item Curl (Optional) L You need this for the Curl probe. =item dig (Optional) L You need this for the DNS probe. =item SSH (Optional) L You need this for the SSH probe. =item Webserver L Well I wont get much into this. The important thing is, to have a webserver which allows you to run CGI and preferably FastCGI scripts. If you are using Apache I strongly recommend using the F system for running CGI scripts as a particular user. See L and L for more information on this. =item Perl 5.8.8 or later. If you still have an older version, maybe have a look at perlbrew. =item Various Perl modules (Many are optional) The modules are al available from L and you may be able to get them as packages from your distros repository. There is also a script provided in the setup folder to install the missing bits. You will be instructed later on how to use the script. =over =item FCGI The module for supporting FastCGI operation. =item CGI, CGI::Fast Perl CGI/FastCGI support. Might already be installed localy. =item Config::Grammar The configuration file parser used in smokeping =item LWP The master/slave functionality introduced a dependency LWP::UserAgent from the libwww-perl (also known as LWP) library. The module is required even if the master/slave mode is not enabled. =item Socket6 (optional) The Socket6 module enables smokeping to check hostnames that only resolve to an IPv6 address. If you probe such hosts using ie. the FPing6 probe and get warnings that those hosts don't resolve to an IP address, you need to install it. =item Net::Telnet (optional) You need this for the TelnetIOSPing probe. =item Net::OpenSSH (optional) You need this for the OpenSSHJunOSPing probe. =item Net::DNS (optional) You need this for the AnotherDNS probe. =item Net::LDAP (optional) You need this for the LDAP probe. =item IO::Socket::SSL (optional) You need this if you want the LDAP probe to be able to use the 'starttls' command. =item Authen::Radius (optional) You need this for the Radius probe. =back =back =head2 Installation Once the tools listed above are in place, you can start setting up SmokePing itself. Unpack the tar archive and run the included configure script: ./configure --prefix=/opt/smokeping Configure will verify that all the required perl modules are available. If some are missing it will tell you to run the module build script. Just follow the instructions on screen and then run configure again. Once it completes, you can run make install to finish your setup. =head2 Configuration Use the F file as a template to create your own smokeping configuration file. See L for details. =over =item Installing the webinterface Copy the content of the F directory to the place where your webserver expects its data. Maybe to F. Edit the F script to point to your smokeping_cgi script. If you have no FastCGI support in your webserver, you may want to use the F script. =item F Edit the html template to your likings. Please do not remove the link to the SmokePing counter and my name from the template. The content of the template will be renderd by the smokeping.cgi. This means that all embeded links must be relative to smokeping.cgi. =item F If you are going to use the B IP support, customize the contents of this file. =back =head2 Starting the Smokeping Daemon With all the scaffolding in place, you can now launch the smokeping daemon and send have it gather data for you. First you may want to run it in debug mode to see what it is doing ./bin/smokeping --config=/opt/smokeping/etc/config --debug once all is well, start it up as a deamon. I would recomend to enable the logfile option so that you can see if it runs into trouble. ./bin/smokeping --config=/opt/smokeping/etc/config --logfile=smoke.log Once the system works, you may want to put a SmokePing startup script into your F tree. Check out L for further information. When you can now also open the smokeping.cgi webpage to look at your data. =head1 COPYRIGHT Copyright (c) 2001, 2011 by Tobias Oetiker. All right reserved. =head1 LICENSE This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. =head1 AUTHOR Tobias Oetiker Etobi@oetiker.chE =cut