Merge branch 'master' into lets-split-support

15 files changed, 1875 insertions, 1 deletions

diff --git a/keyboards/infinity_ergodox/MEMO.txt b/keyboards/infinity_ergodox/MEMO.txt
new file mode 100644
index 000000000..e2886aa00
--- /dev/null
+++ b/keyboards/infinity_ergodox/MEMO.txt
@@ -0,0 +1,385 @@
+flabbergast's TMK/ChibiOS port
+==============================
+2015/10/16
+
+
+Build
+-----
+$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
+
+$ cd tmk_keyboard
+$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+or
+$ cd tmk_keyboard/tmk_core/tool/chibios
+$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+
+$ cd tmk_keyboard/keyboard/infinity_chibios
+$ make
+
+
+
+
+Chibios Configuration
+---------------------
+halconf.h: for HAL configuration
+    placed in project directory
+    read in chibios/os/hal/hal.mk
+    included in chibios/os/hal/include/hal.h
+mcuconf.h: for MCU configuration
+    placed in project directory
+    included in halconf.h
+
+
+Chibios Term
+------------
+PAL = Port Abstraction Layer
+    palWritePad
+    palReadPad
+    palSetPad
+    chibios/os/hal/include/pal.h
+
+LLD = Low Level Driver
+
+
+Makefile
+--------
+    #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+    MCU_FAMILY = KINETIS
+    MCU_SERIES = KL2x
+
+    # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+    #   or <this_dir>/ld/
+    MCU_LDSCRIPT = MKL26Z64
+
+    #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+    MCU_STARTUP = kl2x
+
+    # Board: it should exist either in <chibios>/os/hal/boards/
+    #  or <this_dir>/boards
+    BOARD = PJRC_TEENSY_LC
+
+    MCU  = cortex-m0
+
+    # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+    ARMV = 6
+
+
+halconf.h
+---------
+
+
+mcuconf.h
+---------
+
+
+chconf.h
+--------
+
+
+ld script
+---------
+--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld     2015-10-15 09:08:58.732904304 +0900
++++ ld/MKL26Z64.ld      2015-10-15 08:48:06.430215496 +0900
+@@ -27,7 +27,8 @@
+ {
+   flash0   :  org = 0x00000000,  len = 0xc0
+   flashcfg :  org = 0x00000400,  len = 0x10
+-  flash    :  org = 0x00000410,  len = 64k - 0x410
++  flash    :  org = 0x00000410,  len = 62k - 0x410
++  eeprom_emu : org = 0x0000F800, len = 2k
+   ram      :  org = 0x1FFFF800,  len = 8k
+ }
+
+@@ -35,6 +36,10 @@
+ __ram_size__            = LENGTH(ram);
+ __ram_end__             = __ram_start__ + __ram_size__;
+
++__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
++__eeprom_workarea_size__  = LENGTH(eeprom_emu);
++__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
++
+ SECTIONS
+ {
+   . = 0;
+
+
+
+Configuration/Startup for Infinity 60%
+--------------------------------------
+Configuration:
+
+
+Clock:
+Inifinity   
+    FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
+    Clock dividor:
+    SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
+    SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
+    SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
+    Internal reference clock:
+    MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
+    MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
+    FLL multipilication:
+    MCG_C4[DMX32] = 1
+    MCG_C4[DRST_DRS] = 01   FLL factor 1464 * 32.768kHz = 48MHz
+
+chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
+    k20x_clock_init(): called in __early_init() defined in board.c
+        disable watchdog and configure clock
+
+        configurable macros:
+        KINETIS_NO_INIT: whether init or not
+        KINETIS_MCG_MODE: clock mode   
+            KINETIS_MCG_MODE_FEI
+            KINETIS_MCG_MODE_PEE
+                hal/ports/KINETIS/K20x/hal_lld.h
+            
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
+    PALConfig pal_default_config
+    boardInit()
+    __early_init()
+    macro definitions for board infos, freq and mcu type
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
+
+USB
+
+
+Startup
+-------
+    common/ports/ARMCMx/GCC/crt0_v[67]m.s
+        Reset_Handler: startup code
+    common/ports/ARMCMx/GCC/crt1.c
+        __core_init(): weak
+        __early_init(): weak
+        __late_init(): weak
+        __default_exit(): weak
+            called from Reset_Handler of crt0
+    common/ports/ARMCMx/GCC/vector.c
+    common/ports/ARMCMx/GCC/ld/*.ld
+
+chibios/os/common/ports/ARMCMx/compilers/GCC/
+├── crt0_v6m.s
+├── crt0_v7m.s
+├── crt1.c
+├── ld
+│   ├── MK20DX128BLDR3.ld
+│   ├── MK20DX128BLDR4.ld
+│   ├── MK20DX128.ld
+│   ├── MK20DX256.ld
+│   ├── MKL25Z128.ld
+│   ├── MKL26Z128.ld
+│   ├── MKL26Z64.ld
+│   └── STM32L476xG.ld
+├── mk
+│   ├── startup_k20x5.mk
+│   ├── startup_k20x7.mk
+│   ├── startup_k20x.mk
+│   ├── startup_kl2x.mk
+│   └── startup_stm32l4xx.mk
+├── rules.ld
+├── rules.mk
+└── vectors.c
+
+chibios/os/hal/
+├── boards
+│   ├── FREESCALE_FREEDOM_K20D50M
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── MCHCK_K20
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_3
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_3_1
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_LC
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── readme.txt
+│   ├── simulator
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── ST_NUCLEO_F030R8
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   ├── board.mk
+│   │   └── cfg
+│   │       └── board.chcfg
+├── hal.mk
+├── include
+│   ├── adc.h
+│   ├── can.h
+│   ├── dac.h
+│   ├── ext.h
+│   ├── gpt.h
+│   ├── hal_channels.h
+│   ├── hal_files.h
+│   ├── hal.h
+│   ├── hal_ioblock.h
+│   ├── hal_mmcsd.h
+│   ├── hal_queues.h
+│   ├── hal_streams.h
+│   ├── i2c.h
+│   ├── i2s.h
+│   ├── icu.h
+│   ├── mac.h
+│   ├── mii.h
+│   ├── mmc_spi.h
+│   ├── pal.h
+│   ├── pwm.h
+│   ├── rtc.h
+│   ├── sdc.h
+│   ├── serial.h
+│   ├── serial_usb.h
+│   ├── spi.h
+│   ├── st.h
+│   ├── uart.h
+│   └── usb.h
+├── lib
+│   └── streams
+│       ├── chprintf.c
+│       ├── chprintf.h
+│       ├── memstreams.c
+│       ├── memstreams.h
+│       ├── nullstreams.c
+│       └── nullstreams.h
+├── osal
+│   ├── nil
+│   │   ├── osal.c
+│   │   ├── osal.h
+│   │   └── osal.mk
+│   ├── os-less
+│   │   └── ARMCMx
+│   │       ├── osal.c
+│   │       ├── osal.h
+│   │       └── osal.mk
+│   └── rt
+│       ├── osal.c
+│       ├── osal.h
+│       └── osal.mk
+├── ports
+│   ├── AVR
+│   ├── common
+│   │   └── ARMCMx
+│   │       ├── mpu.h
+│   │       ├── nvic.c
+│   │       └── nvic.h
+│   ├── KINETIS
+│   │   ├── K20x
+│   │   │   ├── hal_lld.c
+│   │   │   ├── hal_lld.h
+│   │   │   ├── kinetis_registry.h
+│   │   │   ├── platform.dox
+│   │   │   ├── platform.mk
+│   │   │   ├── pwm_lld.c
+│   │   │   ├── pwm_lld.h
+│   │   │   ├── spi_lld.c
+│   │   │   └── spi_lld.h
+│   │   ├── KL2x
+│   │   │   ├── hal_lld.c
+│   │   │   ├── hal_lld.h
+│   │   │   ├── kinetis_registry.h
+│   │   │   ├── platform.mk
+│   │   │   ├── pwm_lld.c
+│   │   │   └── pwm_lld.h
+│   │   ├── LLD
+│   │   │   ├── adc_lld.c
+│   │   │   ├── adc_lld.h
+│   │   │   ├── ext_lld.c
+│   │   │   ├── ext_lld.h
+│   │   │   ├── gpt_lld.c
+│   │   │   ├── gpt_lld.h
+│   │   │   ├── i2c_lld.c
+│   │   │   ├── i2c_lld.h
+│   │   │   ├── pal_lld.c
+│   │   │   ├── pal_lld.h
+│   │   │   ├── serial_lld.c
+│   │   │   ├── serial_lld.h
+│   │   │   ├── st_lld.c
+│   │   │   ├── st_lld.h
+│   │   │   ├── usb_lld.c
+│   │   │   └── usb_lld.h
+│   │   └── README.md
+│   ├── LPC
+│   ├── simulator
+│   └── STM32
+├── src
+│   ├── adc.c
+│   ├── can.c
+│   ├── dac.c
+│   ├── ext.c
+│   ├── gpt.c
+│   ├── hal.c
+│   ├── hal_mmcsd.c
+│   ├── hal_queues.c
+│   ├── i2c.c
+│   ├── i2s.c
+│   ├── icu.c
+│   ├── mac.c
+│   ├── mmc_spi.c
+│   ├── pal.c
+│   ├── pwm.c
+│   ├── rtc.c
+│   ├── sdc.c
+│   ├── serial.c
+│   ├── serial_usb.c
+│   ├── spi.c
+│   ├── st.c
+│   ├── uart.c
+│   └── usb.c
+└── templates
+    ├── adc_lld.c
+    ├── adc_lld.h
+    ├── can_lld.c
+    ├── can_lld.h
+    ├── dac_lld.c
+    ├── dac_lld.h
+    ├── ext_lld.c
+    ├── ext_lld.h
+    ├── gpt_lld.c
+    ├── gpt_lld.h
+    ├── halconf.h
+    ├── hal_lld.c
+    ├── hal_lld.h
+    ├── i2c_lld.c
+    ├── i2c_lld.h
+    ├── i2s_lld.c
+    ├── i2s_lld.h
+    ├── icu_lld.c
+    ├── icu_lld.h
+    ├── mac_lld.c
+    ├── mac_lld.h
+    ├── mcuconf.h
+    ├── osal
+    │   ├── osal.c
+    │   ├── osal.h
+    │   └── osal.mk
+    ├── pal_lld.c
+    ├── pal_lld.h
+    ├── platform.mk
+    ├── pwm_lld.c
+    ├── pwm_lld.h
+    ├── rtc_lld.c
+    ├── rtc_lld.h
+    ├── sdc_lld.c
+    ├── sdc_lld.h
+    ├── serial_lld.c
+    ├── serial_lld.h
+    ├── spi_lld.c
+    ├── spi_lld.h
+    ├── st_lld.c
+    ├── st_lld.h
+    ├── uart_lld.c
+    ├── uart_lld.h
+    ├── usb_lld.c
+    └── usb_lld.h
diff --git a/keyboards/infinity_ergodox/Makefile b/keyboards/infinity_ergodox/Makefile
new file mode 100644
index 000000000..fb21aae5e
--- /dev/null
+++ b/keyboards/infinity_ergodox/Makefile
@@ -0,0 +1,72 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity 60%
+#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/infinity_ergodox/bootloader_defs.h b/keyboards/infinity_ergodox/bootloader_defs.h
new file mode 100644
index 000000000..c67153be6
--- /dev/null
+++ b/keyboards/infinity_ergodox/bootloader_defs.h
@@ -0,0 +1 @@
+#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/infinity_ergodox/chconf.h b/keyboards/infinity_ergodox/chconf.h
new file mode 100644
index 000000000..d59c35eb6
--- /dev/null
+++ b/keyboards/infinity_ergodox/chconf.h
@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_ergodox/config.h b/keyboards/infinity_ergodox/config.h
new file mode 100644
index 000000000..d24ee0f05
--- /dev/null
+++ b/keyboards/infinity_ergodox/config.h
@@ -0,0 +1,80 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "TMK"
+#define USBSTR_MANUFACTURER    'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00'
+#define PRODUCT "Infinity keyboard/TMK"
+#define USBSTR_PRODUCT         'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00'
+
+/* key matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 5
+#define LOCAL_MATRIX_ROWS 9
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infiity prototype */
+#define INFINITY_PROTOTYPE
+
+#define SERIAL_LINK_BAUD 562500
+#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
+// The visualizer needs gfx thread priorities
+#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/infinity_ergodox/halconf.h b/keyboards/infinity_ergodox/halconf.h
new file mode 100644
index 000000000..55dd5e88d
--- /dev/null
+++ b/keyboards/infinity_ergodox/halconf.h
@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         128
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_ergodox/infinity_ergodox.c b/keyboards/infinity_ergodox/infinity_ergodox.c
new file mode 100644
index 000000000..34aded1a7
--- /dev/null
+++ b/keyboards/infinity_ergodox/infinity_ergodox.c
@@ -0,0 +1 @@
+#include "infinity_ergodox.h"
diff --git a/keyboards/infinity_ergodox/infinity_ergodox.h b/keyboards/infinity_ergodox/infinity_ergodox.h
new file mode 100644
index 000000000..de7267594
--- /dev/null
+++ b/keyboards/infinity_ergodox/infinity_ergodox.h
@@ -0,0 +1,44 @@
+#ifndef KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_
+#define KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    A80, A70, A60, A50, A40, A30, A20,  \
+    A81, A71, A61, A51, A41, A31, A21,  \
+    A82, A72, A62, A52, A42, A32,       \
+    A83, A73, A63, A53, A43, A33, A23,  \
+    A84, A74, A64, A54, A44,            \
+                                  A13, A03, \
+                                       A04, \
+                             A34, A24, A14, \
+         B20, B30, B40, B50, B60, B70, B80, \
+         B21, B31, B41, B51, B61, B71, B81, \
+              B32, B42, B52, B62, B72, B82, \
+         B23, B33, B43, B53, B63, B73, B83, \
+                   B44, B54, B64, B74, B84, \
+    B03, B13,     \
+    B04,          \
+    B14, B24, B34 \
+) { \
+    { KC_NO,    KC_NO,    KC_NO,    KC_##A03, KC_##A04 }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_##A13, KC_##A14 }, \
+    { KC_##A20, KC_##A21, KC_NO,    KC_##A23, KC_##A24 }, \
+    { KC_##A30, KC_##A31, KC_##A32, KC_##A33, KC_##A34 }, \
+    { KC_##A40, KC_##A41, KC_##A42, KC_##A43, KC_##A44 }, \
+    { KC_##A50, KC_##A51, KC_##A52, KC_##A53, KC_##A54 }, \
+    { KC_##A60, KC_##A61, KC_##A62, KC_##A63, KC_##A64 }, \
+    { KC_##A70, KC_##A71, KC_##A72, KC_##A73, KC_##A74 }, \
+    { KC_##A80, KC_##A81, KC_##A82, KC_##A83, KC_##A84 }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_##B03, KC_##B04 }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_##B13, KC_##B14 }, \
+    { KC_##B20, KC_##B21, KC_NO,    KC_##B23, KC_##B24 }, \
+    { KC_##B30, KC_##B31, KC_##B32, KC_##B33, KC_##B34 }, \
+    { KC_##B40, KC_##B41, KC_##B42, KC_##B43, KC_##B44 }, \
+    { KC_##B50, KC_##B51, KC_##B52, KC_##B53, KC_##B54 }, \
+    { KC_##B60, KC_##B61, KC_##B62, KC_##B63, KC_##B64 }, \
+    { KC_##B70, KC_##B71, KC_##B72, KC_##B73, KC_##B74 }, \
+    { KC_##B80, KC_##B81, KC_##B82, KC_##B83, KC_##B84 }  \
+}
+
+#endif /* KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ */
diff --git a/keyboards/infinity_ergodox/keymaps/default/keymap.c b/keyboards/infinity_ergodox/keymaps/default/keymap.c
new file mode 100644
index 000000000..c33fb7b92
--- /dev/null
+++ b/keyboards/infinity_ergodox/keymaps/default/keymap.c
@@ -0,0 +1,111 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "infinity_ergodox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    KEYMAP(  // layer 0 : default
+        // left hand
+        EQL, 1,   2,   3,   4,   5,   ESC,
+        BSLS,Q,   W,   E,   R,   T,   FN1,
+        TAB, A,   S,   D,   F,   G,
+        LSFT,Z,   X,   C,   V,   B,   FN0,
+        LGUI,GRV, BSLS,LEFT,RGHT,
+                                      LCTL,LALT,
+                                           HOME,
+                                 BSPC,DEL, END,
+        // right hand
+             FN2, 6,   7,   8,   9,   0,   MINS,
+             LBRC,Y,   U,   I,   O,   P,   RBRC,
+                  H,   J,   K,   L,   SCLN,QUOT,
+             FN0, N,   M,   COMM,DOT, SLSH,RSFT,
+                       LEFT,DOWN,UP,  RGHT,RGUI,
+        RALT,RCTL,
+        PGUP,
+        PGDN,ENT, SPC
+    ),
+
+    KEYMAP(  // layer 1 : function and symbol keys
+        // left hand
+        TRNS,F1,  F2,  F3,  F4,  F5,  F11,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN3,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,
+                                      TRNS,TRNS,
+                                           TRNS,
+                                 TRNS,TRNS,TRNS,
+        // right hand
+             F12, F6,  F7,  F8,  F9,  F10, TRNS,
+             TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+                  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+             TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+                       TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,
+        TRNS,
+        TRNS,TRNS,TRNS
+    ),
+
+    KEYMAP(  // layer 2 : keyboard functions
+        // left hand
+        BTLD,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, FN3,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,
+                                      TRNS,TRNS,
+                                           TRNS,
+                                 TRNS,TRNS,TRNS,
+        // right hand
+             TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+             TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+                  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+             TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+                       TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,
+        TRNS,
+        TRNS,TRNS,TRNS
+    ),
+
+    KEYMAP(  // layer 3: numpad
+        // left hand
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+        TRNS,TRNS,TRNS,TRNS,TRNS,
+                                      TRNS,TRNS,
+                                           TRNS,
+                                 TRNS,TRNS,TRNS,
+        // right hand
+             TRNS,NLCK,PSLS,PAST,PAST,PMNS,BSPC,
+             TRNS,NO,  P7,  P8,  P9,  PMNS,BSPC,
+                  NO,  P4,  P5,  P6,  PPLS,PENT,
+             TRNS,NO,  P1,  P2,  P3,  PPLS,PENT,
+                       P0,  PDOT,SLSH,PENT,PENT,
+        TRNS,TRNS,
+        TRNS,
+        TRNS,TRNS,TRNS
+    ),
+};
+const uint16_t fn_actions[] = {
+    ACTION_LAYER_MOMENTARY(1),                      // FN0 - switch to Layer1
+    ACTION_LAYER_SET(2, ON_PRESS),                  // FN1 - set Layer2
+    ACTION_LAYER_TOGGLE(3),                         // FN2 - toggle Layer3 aka Numpad layer
+    ACTION_LAYER_SET(0, ON_PRESS),                  // FN3 - set Layer0
+};
diff --git a/keyboards/infinity_ergodox/led.c b/keyboards/infinity_ergodox/led.c
new file mode 100644
index 000000000..77195bb35
--- /dev/null
+++ b/keyboards/infinity_ergodox/led.c
@@ -0,0 +1,49 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+// The LCD backlight functionality conflicts with this simple
+// red backlight
+#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE)
+    // PTC1: LCD Backlight Red(0:on/1:off)
+    GPIOC->PDDR |= (1<<1);
+    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        GPIOC->PCOR |= (1<<1);
+    } else {
+        GPIOC->PSOR |= (1<<1);
+    }
+#elif !defined(LCD_BACKLIGHT_ENABLE)
+    (void)usb_led;
+    GPIOC->PDDR |= (1<<1);
+    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+    GPIOC->PSOR |= (1<<1);
+    GPIOC->PDDR |= (1<<2);
+    PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+    GPIOC->PSOR |= (1<<2);
+    GPIOC->PDDR |= (1<<3);
+    PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+    GPIOC->PSOR |= (1<<3);
+#else
+    (void)usb_led;
+#endif
+}
diff --git a/keyboards/infinity_ergodox/matrix.c b/keyboards/infinity_ergodox/matrix.c
new file mode 100644
index 000000000..2b806cd64
--- /dev/null
+++ b/keyboards/infinity_ergodox/matrix.c
@@ -0,0 +1,169 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "matrix.h"
+
+
+/*
+ * Infinity ErgoDox Pinusage:
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ *     col: { PTD1, PTD4, PTD5, PTD6, PTD7 }
+ *     row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC9, PTC10, PTC11, PTD0 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[LOCAL_MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+    /* Column(sense) */
+    palSetPadMode(GPIOD, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 4,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
+
+    /* Row(strobe) */
+    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 9,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+
+    memset(matrix, 0, MATRIX_ROWS);
+    memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+    for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+        matrix_row_t data = 0;
+
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOB, 2);    break;
+            case 1: palSetPad(GPIOB, 3);    break;
+            case 2: palSetPad(GPIOB, 18);   break;
+            case 3: palSetPad(GPIOB, 19);   break;
+            case 4: palSetPad(GPIOC, 0);    break;
+            case 5: palSetPad(GPIOC, 9);    break;
+            case 6: palSetPad(GPIOC, 10);   break;
+            case 7: palSetPad(GPIOC, 11);   break;
+            case 8: palSetPad(GPIOD, 0);    break;
+        }
+
+        // need wait to settle pin state
+        // if you wait too short, or have a too high update rate
+        // the keyboard might freeze, or there might not be enough
+        // processing power to update the LCD screen properly.
+        // 20us, or two ticks at 100000Hz seems to be OK
+        wait_us(20);
+
+        // read col data: { PTD1, PTD4, PTD5, PTD6, PTD7 }
+        data = ((palReadPort(GPIOD) & 0xF0) >> 3) |
+               ((palReadPort(GPIOD) & 0x02) >> 1);
+
+        // un-strobe row
+        switch (row) {
+            case 0: palClearPad(GPIOB, 2);  break;
+            case 1: palClearPad(GPIOB, 3);  break;
+            case 2: palClearPad(GPIOB, 18); break;
+            case 3: palClearPad(GPIOB, 19); break;
+            case 4: palClearPad(GPIOC, 0);  break;
+            case 5: palClearPad(GPIOC, 9);  break;
+            case 6: palClearPad(GPIOC, 10); break;
+            case 7: palClearPad(GPIOC, 11); break;
+            case 8: palClearPad(GPIOD, 0);  break;
+        }
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    uint8_t offset = 0;
+#ifdef MASTER_IS_ON_RIGHT
+    if (is_serial_link_master()) {
+        offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS;
+    }
+#endif
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+            matrix[offset + row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    xprintf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        xprintf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                xprintf("1");
+            else
+                xprintf("0");
+        }
+        xprintf("\n");
+    }
+}
+
+void matrix_set_remote(matrix_row_t* rows, uint8_t index) {
+    uint8_t offset = 0;
+#ifdef MASTER_IS_ON_RIGHT
+    offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2);
+#else
+    offset = LOCAL_MATRIX_ROWS * (index + 1);
+#endif
+    for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+        matrix[offset + row] = rows[row];
+    }
+}
diff --git a/keyboards/infinity_ergodox/mcuconf.h b/keyboards/infinity_ergodox/mcuconf.h
new file mode 100644
index 000000000..f6730b99c
--- /dev/null
+++ b/keyboards/infinity_ergodox/mcuconf.h
@@ -0,0 +1,74 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+#define K20x7
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* PEE mode - 48MHz system clock driven by external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    72000000UL
+#define KINETIS_SYSCLK_FREQUENCY    72000000UL
+#define KINETIS_BUSCLK_FREQUENCY    36000000UL
+#define KINETIS_FLASHCLK_FREQUENCY  24000000UL
+
+#if 0
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+#define KINETIS_SERIAL_USE_UART1            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY       2
+
+/*
+ * SPI driver system settings.
+ */
+#define KINETIS_SPI_USE_SPI0                TRUE
+
+#define KINETIS_I2C_USE_I2C0                TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 72be5e6da..3bf2b34f8 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -10,6 +10,7 @@ AR = avr-ar rcs
 NM = avr-nm
 HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
 EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
+BIN =
 
 
 
diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk
index 0abb933a8..cb67ac6f2 100644
--- a/tmk_core/chibios.mk
+++ b/tmk_core/chibios.mk
@@ -113,6 +113,7 @@ AR = arm-none-eabi-ar
 NM = arm-none-eabi-nm
 HEX = $(OBJCOPY) -O $(FORMAT)
 EEP = 
+BIN = $(OBJCOPY) -O binary
 
 THUMBFLAGS = -DTHUMB_PRESENT -mno-thumb-interwork -DTHUMB_NO_INTERWORKING -mthumb -DTHUMB 
 
@@ -151,4 +152,7 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
 endif
 
 # List any extra directories to look for libraries here.
-EXTRALIBDIRS = $(RULESPATH)/ld
\ No newline at end of file
+EXTRALIBDIRS = $(RULESPATH)/ld
+
+dfu-util: $(BUILD_DIR)/$(TARGET).bin sizeafter
+	dfu-util -D $(BUILD_DIR)/$(TARGET).bin
\ No newline at end of file
diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 7d3d8f9a6..352e9314b 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -234,6 +234,7 @@ MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_FLASH = Creating load file for Flash:
 MSG_EEPROM = Creating load file for EEPROM:
+MSG_BIN = Creating binary load file for Flash:
 MSG_EXTENDED_LISTING = Creating Extended Listing:
 MSG_SYMBOL_TABLE = Creating Symbol Table:
 MSG_LINKING = Linking:
@@ -369,6 +370,11 @@ gccversion :
 	$(eval CMD=$(NM) -n $< > $@ )
 	@$(BUILD_CMD)
 
+%.bin: %.elf
+	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
+	$(eval CMD=$(BIN) $< $@ || exit 0)
+	@$(BUILD_CMD)
+
 # Create library from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
 .PRECIOUS : $(OBJ)