Merge remote-tracking branch 'refs/remotes/jackhumbert/master'

8 files changed, 313 insertions, 30 deletions

diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c
new file mode 100644
index 000000000..90ec6f904
--- /dev/null
+++ b/keyboards/atreus/keymaps/jeremy/keymap.c
@@ -0,0 +1,66 @@
+// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer.
+
+#include "atreus.h"
+#include "action_layer.h"
+#include "keymap_colemak.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define ALPH 0
+#define NUMS 1
+#define CURS 2
+#define SYMB 3
+#define FKEY 4
+
+// Some handy macros to keep the keymaps clean and easier to maintain
+#define KM_SAVE LGUI(CM_S)
+#define KM_CLSE LGUI(CM_W)
+#define KM_OPEN LGUI(CM_O)
+
+#define KM_COPY LGUI(KC_C)
+#define KM_CUT  LGUI(KC_X)
+#define KM_PAST LGUI(KC_V)
+#define KM_UNDO LGUI(KC_Z)
+#define KM_REDO LGUI(LSFT(KC_Z))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[ALPH] = {
+  {KC_Q,    KC_W,           KC_E,           KC_R,    KC_T,    KC_TRNS, KC_Y,    KC_U,    KC_I,           KC_O,           KC_P},
+  {KC_A,    LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F,    KC_G,    KC_TRNS, KC_H,    KC_J,    LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN},
+  {KC_Z,    KC_X,           KC_C,           KC_V,    KC_B,    KC_LALT, KC_N,    KC_M,    KC_COMM,        KC_DOT,         KC_SLSH},
+  {KC_LCTL, KC_ESC,         KC_NO,          KC_LSFT, KC_SPC,  KC_LGUI, KC_ENT,  KC_RSFT, KC_NO,          KC_ESC,         KC_RCTL}
+},
+[NUMS] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_ASTR, KC_SLSH, KC_TRNS, KC_TRNS, KC_7,    KC_8,           KC_9,           KC_SLSH},
+  {KC_TRNS, KC_TRNS,        KC_EQL,         KC_PLUS, KC_MINS, KC_TRNS, KC_LPRN, KC_4,    KC_5,           KC_6,           KC_ASTR},
+  {KC_TRNS, KC_TRNS,        KC_DOT,         KC_COMM, CM_SCLN, KC_TRNS, KC_RPRN, KC_1,    KC_2,           KC_3,           KC_MINS},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0,    KC_DOT,         KC_EQL,         KC_PLUS}
+},
+[CURS] = {
+  {KC_TRNS, KC_BSPC,        KC_UP,          KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KM_SAVE, KC_TRNS,        KM_OPEN,        KC_TRNS},
+  {KC_TRNS, KC_LEFT,        KC_DOWN,        KC_RGHT, KC_PGDN, KC_TRNS, KM_UNDO, KC_LALT, KC_TRNS,        KC_LGUI,        KC_TRNS},
+  {KC_TRNS, KC_VOLD,        KC_MUTE,        KC_VOLU, KC_MPLY, KM_COPY, KM_REDO, KM_CLSE, KC_TRNS,        KC_TRNS,        KC_TRNS},
+  {KC_TRNS, KC_TRNS,        RESET,          KC_TRNS, KC_TAB,  KM_CUT,  KM_PAST, KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS}
+},
+[SYMB] = {
+  {KC_BSLS, KC_EXLM,        KC_LABK,        KC_RABK, CM_COLN, KC_TRNS, KC_UNDS, KC_DLR,  KC_QUES,       KC_TRNS,         KC_PERC},
+  {KC_AT,   KC_AMPR,        KC_LPRN,        KC_RPRN, CM_SCLN, KC_TRNS, KC_COMM, KC_DOT,  KC_QUOT,       KC_TRNS,         KC_TILD},
+  {KC_HASH, KC_PIPE,        KC_LCBR,        KC_RCBR, KC_SLSH, KC_TRNS, KC_TRNS, KC_GRV,  KC_DQT,        KC_TRNS,         KC_CIRC},
+  {KC_TRNS, KC_TRNS,        KC_LBRC,        KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+},
+[FKEY] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9,   KC_F10,        KC_F11,          KC_F12},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5,   KC_F6,         KC_F7,           KC_F8},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1,   KC_F2,         KC_F3,           KC_F4},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+}};
+
+const uint16_t PROGMEM fn_actions[] = {};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {}
+
+  return MACRO_NONE;
+};
diff --git a/keyboards/atreus/keymaps/jeremy/readme.md b/keyboards/atreus/keymaps/jeremy/readme.md
new file mode 100644
index 000000000..df0179a8e
--- /dev/null
+++ b/keyboards/atreus/keymaps/jeremy/readme.md
@@ -0,0 +1,45 @@
+Jeremy's Atreus Key Mapping
+===========================
+
+I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling.
+
+My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015).
+
+## Main Layers
+
+1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac)
+2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5)
+3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4)
+4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973)
+5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89)
+
+## Notes
+
+### General
+
+Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching.
+
+I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory.
+
+### Symbol Layer
+
+1. I placed characters that deal with an if statement close together, such as !, & and |.
+2. All matching brace/bracket characters are together as well.
+
+### Number Layer
+
+1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could.
+2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key.
+3. Parentheses were added for typing on the calculator.
+
+### Cursor Layer
+
+1. It includes basic audio controls because they didn't really fit anywhere else
+2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard.
+3. It contains the backspace and delete keys right on top of the left and right arrows.
+4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word.
+
+### Function Layer
+
+1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row.
+2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved.
diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c
new file mode 100644
index 000000000..ef43aae28
--- /dev/null
+++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c
@@ -0,0 +1,70 @@
+/*
+ * dbroqua HHKB Layout
+ */
+#include "hhkb.h"
+
+#define BASE 0
+#define FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* BASE Level: Default Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+     * |-----------------------------------------------------------------------------------------+
+     * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+     * |-----------------------------------------------------------------------------------------+
+     * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+     * |-----------------------------------------------------------------------------------------+
+     * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |    Left   |Right|
+     * +-----------------------------------------------------------------------------------------+
+     *         | Gui |  Alt   |               Space               | AltGr |  fn |
+     *         `----------------------------------------------------------------´
+     */
+    [BASE] = KEYMAP(
+        KC_ESC,   KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,     KC_9,    KC_0,     KC_MINS,  KC_EQL,    KC_BSLS,  KC_GRV, \
+        KC_TAB,   KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,     KC_O,    KC_P,     KC_LBRC,  KC_RBRC,   KC_BSPC,          \
+        KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,     KC_L,    KC_SCLN,  KC_QUOT,  KC_ENT,                      \
+        KC_LSFT,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM,  KC_DOT,  KC_SLSH,  KC_LEFT,  KC_RGHT,                    \
+                        KC_LGUI, KC_LALT,  /*        */ KC_SPC, KC_RALT, MO(FN)
+    ),
+
+    /* BASE Level: Default Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * |     |  F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F0  | F11 | F12 | Ins | Del|
+     * |-----------------------------------------------------------------------------------------+
+     * | Caps   |     |     |     |     |     |     |     |     |     |     |  Up |     |        |
+     * |-----------------------------------------------------------------------------------------+
+     * |         | Vol-| Vol+| Mute|     |     |     |PrtSc| Home| PgUp| Left |Right|            |
+     * |-----------------------------------------------------------------------------------------+
+     * |           | Prev| Play| Next|     |     |     |     | End |PgDwn| Down|    Up     | Down|
+     * +-----------------------------------------------------------------------------------------+
+     *         |     |        |                                   |       |     |
+     *         `----------------------------------------------------------------´
+     */
+    [FN] = KEYMAP(
+        KC_TRNS,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+        KC_CAPS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,          \
+        KC_TRNS,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,  KC_TRNS,                    \
+        KC_TRNS,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_END,   KC_PGDN,  KC_DOWN,  KC_UP,  KC_DOWN,                    \
+                        KC_TRNS, KC_TRNS,           KC_TRNS,                KC_TRNS, KC_TRNS
+    )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/hhkb/keymaps/dbroqua/readme.md b/keyboards/hhkb/keymaps/dbroqua/readme.md
new file mode 100644
index 000000000..0afebc84c
--- /dev/null
+++ b/keyboards/hhkb/keymaps/dbroqua/readme.md
@@ -0,0 +1,9 @@
+# Dbroqua Layout
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/78eaf35e80bb714eea80cb4049dedb01
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua make dfu
+```
\ No newline at end of file
diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c
index 574c116a7..c505d3a6e 100644
--- a/keyboards/lets_split/lets_split.c
+++ b/keyboards/lets_split/lets_split.c
@@ -24,7 +24,9 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-    _delay_ms(150);
-    stop_all_notes();
+    #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
 }
diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h
index 58cd2cc5b..1e04ba61d 100644
--- a/keyboards/planck/keymaps/cbbrowne/config.h
+++ b/keyboards/planck/keymaps/cbbrowne/config.h
@@ -3,6 +3,9 @@
 
 #include "../../config.h"
 
+#define LEADER_TIMEOUT 300
+#define BACKLIGHT_BREATHING
+
 /* cbbrowne user configuration */
 
 #define randadd 53
@@ -16,5 +19,3 @@
 
 #endif
 
-
-
diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c
index 898f6f0e0..7f1601af7 100644
--- a/keyboards/planck/keymaps/cbbrowne/keymap.c
+++ b/keyboards/planck/keymaps/cbbrowne/keymap.c
@@ -65,10 +65,11 @@
 */
 
 enum layers {
-  _QW = 0,  /* Qwerty mapping */
-  _LW, /* Lower layer, where top line has symbols !@#$%^&*() */
-  _RS, /* Raised layer, where top line has digits 1234567890 */
-  _KP, /* Key pad */
+  _QWERTY = 0,  /* Qwerty mapping */
+  _LOWER, /* Lower layer, where top line has symbols !@#$%^&*() */
+  _RAISE, /* Raised layer, where top line has digits 1234567890 */
+  _KEYPAD, /* Key pad */
+  _ADJUST, /* Special Adjust layer coming via tri-placement */
 };
 
 enum macro_id {
@@ -76,37 +77,60 @@ enum macro_id {
   M_USERNAME,
   M_RANDDIGIT,
   M_RANDLETTER,
-  M_VERSION
+  M_VERSION,
+  MACRO_UPPER,
+  MACRO_LOWER,
 };
 
+#define M_LOWER M(MACRO_LOWER)
+#define M_UPPER M(MACRO_UPPER)
+#define ROT_LED M(M_LED)   /* Rotate LED */
+#define QWERTY DF(_QWERTY)   /* Switch to QWERTY layout */
+#define KEYPAD DF(_KEYPAD)   /* Switch to keypad */
+#define USERNAME M(M_USERNAME) /* shortcut for username */
+#define RANDDIG M(M_RANDDIGIT)
+#define RANDALP M(M_RANDLETTER)
+#define CTLENTER MT(MOD_RCTL, KC_ENT)
+#define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT)
+#define ALTRIGHT MT(MOD_LALT, KC_RGHT)
+#define MVERSION M(M_VERSION)
+
+
 /* Note that Planck has dimensions 4 rows x 12 columns */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_QW] = { /* Qwerty */
+[_QWERTY] = { /* Qwerty */
   {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MT(MOD_RSFT, KC_ENT)},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT },
-  {KC_TAB,  M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, CTLENTER},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SHIFTQUOTE },
+  {KC_TAB,  KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC,  KC_SPC,  M_UPPER, KC_LEFT, KC_DOWN, KC_UP,   ALTRIGHT}
   /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */
 },
-[_RS] = { /* RAISE */
+[_RAISE] = { /* RAISE */
   {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
   {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_KP), DF(_KP), RESET,   _______},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  QWERTY,  KEYPAD,  KEYPAD,  RESET,   _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 },
-[_LW] = { /* LOWER */
+[_LOWER] = { /* LOWER */
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
   {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_KP), DF(_KP), RESET,   _______},
-  {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  QWERTY,  KEYPAD,  KEYPAD, RESET,   _______},
+  {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+    },
+[_KEYPAD] = { /* Key Pad */
+  {KC_ESC,  USERNAME,    MVERSION,   KC_F10,   KC_F11,  KC_F12,   KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
+  {KC_LCTL, RANDDIG,   KC_F5,   KC_F6,    KC_F7,   KC_F8,    KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
+  {KC_LSFT, RANDALP,   KC_F1,   KC_F2,    KC_F3,   KC_F4,    KC_DEL,  KC_KP_PLUS,  KC_1, KC_2,  KC_3, KC_ENTER},
+  {KC_TAB,  KC_LALT, ROT_LED, KC_LGUI,  M_LOWER,  KC_SPC,    KC_SPC,  QWERTY,   KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT}
 },
-[_KP] = { /* Key Pad */
-  {KC_ESC,  M(M_USERNAME),    M(M_VERSION),   KC_F10,   KC_F11,  KC_F12,   KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
-  {KC_LCTL, M(M_RANDDIGIT),   KC_F5,   KC_F6,    KC_F7,   KC_F8,    KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
-  {KC_LSFT, M(M_RANDLETTER),  KC_F1,   KC_F2,    KC_F3,   KC_F4,    KC_DEL,  KC_KP_PLUS,  KC_1, KC_2,  KC_3, KC_ENTER},
-  {BL_STEP, M(M_LED), KC_LALT, KC_LGUI, KC_NO, KC_SPC,  KC_SPC,  DF(_QW),   KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT}
-}
+
+[_ADJUST] = { /* Adjustments - gonna shift the wild tools in here */
+  {ROT_LED,USERNAME,MVERSION, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  {_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  {_______, RANDALP, _______, _______, _______,   RESET,   RESET, _______, _______, _______, _______, _______ },
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
+}  
 };
 
 /* What is fn_actions actually used for??? */
@@ -171,6 +195,39 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       unregister_code (KC_A + rval);
     }
     break;
+  case MACRO_UPPER:
+    if (record->event.pressed)
+      {
+	layer_on(_RAISE);
+#ifdef BACKLIGHT_ENABLE
+	breathing_speed_set(2);
+	breathing_pulse();
+#endif
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    else
+      {
+	layer_off(_RAISE);
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    break;
+  case MACRO_LOWER:
+    if (record->event.pressed)
+      {
+	layer_on(_LOWER);
+#ifdef BACKLIGHT_ENABLE
+	breathing_speed_set(2);
+	breathing_pulse();
+#endif
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    else
+      {
+	layer_off(_LOWER);
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    break;
+    
   }
   return MACRO_NONE;
 };
diff --git a/keyboards/planck/keymaps/cbbrowne/readme.md b/keyboards/planck/keymaps/cbbrowne/readme.md
index 51979f630..184142e0c 100644
--- a/keyboards/planck/keymaps/cbbrowne/readme.md
+++ b/keyboards/planck/keymaps/cbbrowne/readme.md
@@ -24,7 +24,26 @@ doing sundry experimentation:
    - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random
    - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random
    - Key [1][3] aka "e" spits out the keymap version number
- * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping.  I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-)
+  * Trying out sgoodwin's "hold Enter down to get Shift"
+    - Liking this Quite Well Enough...
+    - Applied this to both Shift and Quote
+    - It seems likely that Alt should get a right-hand-side, akin to this...
+    - Alt needs to move, and get a RHS
+      - Hence ALTRIGHT, and shifted ROT_LED over
+      - Emacs likes this!!!  :-)
+    - I'm suspicious that I'll want to shift ROT_LED another location over,
+      so some modifier can replace the OS/KC_LGUI key
+  * I have added an alternate ADJUST layer that is activated via update_tri_layer()
+    - e.g. - LOWER+RAISE simultaneously
+    - This seems entirely more useful for handling my "special keys"
+      like the random numbers, user name, and such, than the keypad layer
+  * The _ADJUST layer provides a good place to have RESET
+    - But this isn't strictly enough; I want RESET somewhat accessible from
+      main layer lest an error hide that layer
+    - I never use the OS/KC_LGUI key (that's Command on MacOS, Windows
+      Key on Windows), so that's a good place to have it as a chord of
+      some sort
+        
 
 2. Some code structure ideas
 ---------------------------------------------------
@@ -43,8 +62,8 @@ doing sundry experimentation:
    only need to fit 4 symbols onto each line, rather than 12.
 
    I used enums to manage layer IDs and macro IDs so that I don't need
-   to care (beyond "start at 0", and arguably that's not needed) about
-   their values.
+   to care (beyond "start at 0", and arguably even that's not needed)
+   about their values.
 
 3. Things I did not like about the default mapping
 ---------------------------------------------------------
@@ -57,12 +76,27 @@ doing sundry experimentation:
      and shift ESC off the first column so KC_LCTL and KC_LALT can
      be on the first column.
    * I needed to swap ' and ENTER
+
+4. Unuseful experiments
+---------------------------------------------------------
+
+I have tried some things out that didn't turn out particularly well.
+I'll note some of these for posterity, hopefully helpful in not doing
+unwise things again...
+
    * I tried added Workman alongside Dvorak and Colemak
      - Boy, oh boy, these don't help!!!
      - I have done 30 years of learning of Emacs key mappings, and
        these alternative keyboards massively mess me up
 
-4. TODO
+   * Space Cadet Shift; switching L_SHIFT to KC_LSP0, so that when I
+     just hit SHIFT, I get a left parens.  In principle, this is great
+     for Lisping.
+     - Unfortunately, there are times when mouse interfaces use SHIFT
+       to allow selecting multiple items, and this really interferes
+        with that
+
+5. TODO
 ---------------------------------------------------------
 
   * I use tmux quite a lot; the mollat keymap seems to have some
@@ -77,4 +111,3 @@ doing sundry experimentation:
   * The jeebak keymap seems to have some neat ideas:
     - Number layer which is aggressive about having numbers in several places
     - Touch layer seems interesting
-  * Trying out sgoodwin's "hold Enter down to get Shift"
\ No newline at end of file