added support for jd45

7 files changed, 451 insertions, 0 deletions

diff --git a/keyboard/jd45/Makefile b/keyboard/jd45/Makefile
new file mode 100644
index 000000000..076dced82
--- /dev/null
+++ b/keyboard/jd45/Makefile
@@ -0,0 +1,140 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = jd45
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = jd45.c \
+	backlight.c 
+
+ifdef KEYMAP
+    SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk
+
diff --git a/keyboard/jd45/backlight.c b/keyboard/jd45/backlight.c
new file mode 100644
index 000000000..f69364b2a
--- /dev/null
+++ b/keyboard/jd45/backlight.c
@@ -0,0 +1,61 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+
+#define CHANNEL OCR1C
+
+void backlight_init_ports()
+{
+
+    // Setup PB7 as output and output low.
+    DDRB |= (1<<7);
+    PORTB &= ~(1<<7);
+    
+    // Use full 16-bit resolution. 
+    ICR1 = 0xFFFF;
+
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    
+    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+    backlight_init();
+}
+
+void backlight_set(uint8_t level)
+{
+    if ( level == 0 )
+    {
+        // Turn off PWM control on PB7, revert to output low.
+        TCCR1A &= ~(_BV(COM1C1));
+        CHANNEL = 0x0;
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+    }
+    else if ( level == BACKLIGHT_LEVELS )
+    {
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        // Set the brightness
+        CHANNEL = 0xFFFF;
+    }
+    else        
+    {
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        // Set the brightness
+        CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+    }
+}
\ No newline at end of file
diff --git a/keyboard/jd45/config.h b/keyboard/jd45/config.h
new file mode 100644
index 000000000..24e162950
--- /dev/null
+++ b/keyboard/jd45/config.h
@@ -0,0 +1,79 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Planck Keyboard
+#define DESCRIPTION     A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13 
+
+/* Planck PCB default pin-out */
+#define COLS (int []){F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0}
+#define ROWS (int []){F0, F1, F5, B4}
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+#define NO_DEBUG
+
+/* disable print */
+#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/jd45/jd45.c b/keyboard/jd45/jd45.c
new file mode 100644
index 000000000..d05714f07
--- /dev/null
+++ b/keyboard/jd45/jd45.c
@@ -0,0 +1,27 @@
+#include "jd45.h"
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+
+};
+
+void * matrix_init_kb(void) {
+	#ifdef BACKLIGHT_ENABLE
+    	backlight_init_ports();
+	#endif
+
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+};
+
+void * matrix_scan_kb(void) {
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};
diff --git a/keyboard/jd45/jd45.h b/keyboard/jd45/jd45.h
new file mode 100644
index 000000000..f07bd5e13
--- /dev/null
+++ b/keyboard/jd45/jd45.h
@@ -0,0 +1,12 @@
+#ifndef JD45_H
+#define JD45_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include "backlight.h"
+#include <stddef.h>
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif
diff --git a/keyboard/jd45/keymaps/keymap_default.c b/keyboard/jd45/keymaps/keymap_default.c
new file mode 100644
index 000000000..05dd46e79
--- /dev/null
+++ b/keyboard/jd45/keymaps/keymap_default.c
@@ -0,0 +1,31 @@
+#include "jd45.h"
+#include "backlight.h"
+
+/* this keymap is to provide a basic keyboard layout for testing the matrix
+ * for more practical and complicated keymap refer to other keymaps in the same folder
+ */
+/* JD45 keymap definition macro
+ */
+#define KEYMAP( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
+	K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
+	K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
+	K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
+) { \
+    { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
+    { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO    }, \
+    { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO    }, \
+    { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_##K43, KC_NO,    KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO    }  \
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+  ESC,   Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,     QUOT, BSPC,
+  TAB,   A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN,  ENT,
+  LSFT,  Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,  RSFT,
+  PAUSE, LCTL, LALT, DEL,  SPC,  DEL,  LEFT, UP,   DOWN, RIGHT ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
diff --git a/keyboard/jd45/keymaps/keymap_justin.c b/keyboard/jd45/keymaps/keymap_justin.c
new file mode 100644
index 000000000..f261b5463
--- /dev/null
+++ b/keyboard/jd45/keymaps/keymap_justin.c
@@ -0,0 +1,101 @@
+#include "jd45.h"
+#include "backlight.h"
+
+/* JD45 keymap definition macro
+ */
+#define KEYMAP( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
+	K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
+	K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
+	K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
+) { \
+    { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
+    { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO    }, \
+    { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO    }, \
+    { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_##K43, KC_NO,    KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO    }  \
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+  ESC,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, QUOT, BSPC,
+  FN8,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,     ENT,
+  LSFT, Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH,  FN6,
+  FN4, LGUI, FN7, FN2,  FN1,  SPC,  FN5,  RALT,  FN3, FN0 ),
+[1] = KEYMAP(
+  TRNS, FN10, FN11, FN12, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, DEL,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGUP, LEFT, RGHT,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, END,  PGDN, DOWN, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
+[2] = KEYMAP(
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,    7,    8,    9,    0, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC,    4,    5,    6,  DOT, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC,    1,    2,    3, BSLS, TRNS,
+  TRNS,FN29, TRNS, TRNS, TRNS, PAUSE,  EQL, MINS, TRNS, TRNS ),
+[3] = KEYMAP(
+  TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
+[4] = KEYMAP(
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,    7,    8,    9,    0, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC,    4,    5,    6,  DOT, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC,    1,    2,    3, BSLS, TRNS,
+  TRNS,FN29, TRNS, TRNS, TRNS, PAUSE,  EQL, MINS, TRNS, TRNS ),
+};
+
+enum macro_id {
+   PSWD1,
+   PSWD2,
+   PSWD3,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_MINS),
+    [1] = ACTION_LAYER_MOMENTARY(1),  // FN1
+    [2] = ACTION_LAYER_MOMENTARY(2),  // FN2
+    [3] = ACTION_LAYER_MOMENTARY(3),  // FN3
+    [4] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_GRV),
+    [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RGUI),
+    [6] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_CAPS),
+    [7] = ACTION_LAYER_MODS(4, MOD_LSFT),  // FN4
+    [8] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB),
+
+    [10] = ACTION_MACRO(PSWD1),
+    [11] = ACTION_MACRO(PSWD2),
+    [12] = ACTION_MACRO(PSWD3),
+    
+    [29] = ACTION_BACKLIGHT_TOGGLE(),
+    [30] = ACTION_BACKLIGHT_INCREASE(),
+    [31] = ACTION_BACKLIGHT_DECREASE()
+    
+};
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    switch (id) {
+        case PSWD1:
+            return (record->event.pressed ?
+                    MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+                    MACRO_NONE );
+        case PSWD2:
+            return (record->event.pressed ?
+                    MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+                    MACRO_NONE );
+        case PSWD3:
+            return (record->event.pressed ?
+                    MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+                    MACRO_NONE );
+        //case VOLUP:
+        //    return (record->event.pressed ?
+        //            MACRO( D(VOLU), U(VOLU), END ) :
+        //            MACRO_NONE );
+        //case ALT_TAB:
+        //    return (record->event.pressed ?
+        //            MACRO( D(LALT), D(TAB), END ) :
+        //            MACRO( U(TAB), END ));
+    }
+    return MACRO_NONE;
+}