Merge pull request #1231 from Dbroqua/master

S60-X RGB support

15 files changed, 458 insertions, 209 deletions

diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
index 4e2a6f00f..879e493a2 100644
--- a/keyboards/s60-x/Makefile
+++ b/keyboards/s60-x/Makefile
@@ -1,3 +1,5 @@
+SUBPROJECT_DEFAULT = default
+
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
index ac7951c24..8e7bc78be 100644
--- a/keyboards/s60-x/config.h
+++ b/keyboards/s60-x/config.h
@@ -27,138 +27,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Massdrop
-#define PRODUCT         S60-X
-#define DESCRIPTION     q.m.k. keyboard firmware for S60-X
 
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
-#define UNUSED_PINS { F0 }
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
+/* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
 #endif
diff --git a/keyboards/s60-x/default/Makefile b/keyboards/s60-x/default/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/s60-x/default/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/default/config.h b/keyboards/s60-x/default/config.h
new file mode 100644
index 000000000..436c6fa8b
--- /dev/null
+++ b/keyboards/s60-x/default/config.h
@@ -0,0 +1,25 @@
+#ifndef DEFAULT_CONFIG_H
+#define DEFAULT_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT         S60-X
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X
+
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
+#define UNUSED_PINS { F0 }
+
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/s60-x/default/default.c b/keyboards/s60-x/default/default.c
new file mode 100644
index 000000000..253f5495c
--- /dev/null
+++ b/keyboards/s60-x/default/default.c
@@ -0,0 +1,28 @@
+#include "default.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/s60-x/default/default.h b/keyboards/s60-x/default/default.h
new file mode 100644
index 000000000..86233ef7e
--- /dev/null
+++ b/keyboards/s60-x/default/default.h
@@ -0,0 +1,69 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Vin�cius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef DEFAULT_H
+#define DEFAULT_H
+
+#include "quantum.h"
+
+#ifdef __INTELLISENSE__
+#define PROGMEM
+#include "../config.h"
+#endif
+
+/* S60-X keymap definition macro
+* K31 is the extra key next to short left ISO shift
+* K2C is the moved key next to enter on ISO boards
+* K3C is the extra key next to short right JIS shift
+* K0D is extra key from split backspace
+* K3E is extra key from HHKB-style split right shift
+*/
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO    }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO    }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
+}
+
+/*This special definition is used for S60-X keymaps that were ported from TMK
+ * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
+ */
+#define LEGACY_KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+  { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+  { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO  }, \
+  { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO  }, \
+  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
+  { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO  }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/default/rules.mk b/keyboards/s60-x/default/rules.mk
new file mode 100644
index 000000000..b8ff76260
--- /dev/null
+++ b/keyboards/s60-x/default/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE ?= no
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/dbroqua/keymap.c b/keyboards/s60-x/keymaps/dbroqua/keymap.c
new file mode 100644
index 000000000..940119e52
--- /dev/null
+++ b/keyboards/s60-x/keymaps/dbroqua/keymap.c
@@ -0,0 +1,194 @@
+#include "s60-x.h"
+
+#define _DEFAULT 0
+#define _FN 1
+#define _SFX 2
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
+ *         `-----------------------------------------------------------------'
+ */
+  [_DEFAULT] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,  \
+      KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, ______,  KC_ENT,  \
+      KC_LSFT, ______,  KC_Z,    KC_X, KC_C, KC_V,   KC_B, KC_N, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, ______,  KC_RSFT, MO(_FN), \
+      ______,  KC_LGUI, KC_LALT,                     KC_SPC,                       KC_RALT, KC_RGUI, ______,  ______ \
+      ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | SFX | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 | Stop  |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_FN] = KEYMAP( /* Layer 1 */
+      TG(_SFX),KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, KC_F12, KC_INS,  KC_DEL, \
+      KC_CAPS, ______,  ______,  ______,  ______, ______, ______,  ______,  KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,  ______, ______,  \
+      ______,  KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, ______,   \
+      ______,  ______,  KC_MPRV, KC_MPLY, KC_MNXT,______, ______, KC_PPLS,  KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,______, ______, ______,  \
+      ______,  ______,  ______,                           ______,                          KC_MSTP, ______, ______, ______ \
+      ),
+
+
+/* SFX Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | BL- | BL+ | BL  |     |     |     |     |     |     |     |     |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | RGBT| RGBM|     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |      |    |     |           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 |       |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_SFX] = KEYMAP(
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   F(0),   F(1),   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, F(2),   F(3),   F(4),   F(5),   F(6),   F(7),   ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______,                         ______,                         ______, ______, ______, ______ \
+      )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	keyevent_t event = record->event;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+enum function_id {
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [1]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [2]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [3]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [5]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [7]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+    case RGBLED_TOGGLE:
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+  }
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/Makefile b/keyboards/s60-x/rgb/Makefile
new file mode 100644
index 000000000..bd09e5885
--- /dev/null
+++ b/keyboards/s60-x/rgb/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
diff --git a/keyboards/s60-x/rgb/config.h b/keyboards/s60-x/rgb/config.h
new file mode 100644
index 000000000..26b246e57
--- /dev/null
+++ b/keyboards/s60-x/rgb/config.h
@@ -0,0 +1,31 @@
+#ifndef RBG_CONFIG_H
+#define RBG_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT         S60-X-RGB
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X RGB
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 10
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/rgb.c b/keyboards/s60-x/rgb/rgb.c
new file mode 100644
index 000000000..0117e14ae
--- /dev/null
+++ b/keyboards/s60-x/rgb/rgb.c
@@ -0,0 +1 @@
+#include "rgb.h"
diff --git a/keyboards/s60-x/rgb/rgb.h b/keyboards/s60-x/rgb/rgb.h
new file mode 100644
index 000000000..cb7a5f567
--- /dev/null
+++ b/keyboards/s60-x/rgb/rgb.h
@@ -0,0 +1,37 @@
+#ifndef S60XRGB_H
+#define S60XRGB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  KC_NO }  \
+}
+
+/*This special definition is used for S60-X keymaps that were ported from TMK
+ * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
+ */
+#define LEGACY_KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+  { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+  { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO  }, \
+  { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO  }, \
+  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
+  { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO  }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/rules.mk b/keyboards/s60-x/rgb/rules.mk
new file mode 100644
index 000000000..c303af4bc
--- /dev/null
+++ b/keyboards/s60-x/rgb/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c
index 417358140..f031dd770 100644
--- a/keyboards/s60-x/s60-x.c
+++ b/keyboards/s60-x/s60-x.c
@@ -1,28 +1 @@
-#include "s60-x.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
+#include "s60-x.h"
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 29a2a27b2..5bf8cfcef 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -1,69 +1,13 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Vinícius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com>
-Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
 #ifndef S60X_H
 #define S60X_H
 
-#include "quantum.h"
-
-#ifdef __INTELLISENSE__
-#define PROGMEM
-#include "config.h"
+#ifdef SUBPROJECT_default
+    #include "default.h"
+#endif
+#ifdef SUBPROJECT_rgb
+    #include "rgb.h"
 #endif
 
-/* S60-X keymap definition macro
-* K31 is the extra key next to short left ISO shift
-* K2C is the moved key next to enter on ISO boards
-* K3C is the extra key next to short right JIS shift
-* K0D is extra key from split backspace
-* K3E is extra key from HHKB-style split right shift
-*/
-
-#define KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
-) { \
-    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E }, \
-    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO    }, \
-    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO    }, \
-    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E }, \
-    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
-}
-
-/*This special definition is used for S60-X keymaps that were ported from TMK
- * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
- */
-#define LEGACY_KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
-) { \
-  { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
-  { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO  }, \
-  { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO  }, \
-  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
-  { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO  }  \
-}
+#include "quantum.h"
 
 #endif