[Keyboard] Adds support for BM16S keyboard (#5659)

* Added support for BM16S keyboard.

* Update keyboards/bm16s/bm16s.h

Co-Authored-By: bontakun <ben@bontakun.net>

* Update keyboards/bm16s/bm16s.h

Co-Authored-By: bontakun <ben@bontakun.net>

* Cleaned up a bunch of unneeded stuff.

* Made layout name match.

* Changed rules file to have correct bootloader and indention. Updated readme to reflect availability on krepublic. Updated keymap to have more obvious RGB controls.

* Removed unnecessary file.

* Fixed grammar in readme.

Co-Authored-By: bontakun <ben@bontakun.net>

* Migrated to autogenerated layout config, without issue.

* Renamed LAYOUT to match community standards.

7 files changed, 212 insertions, 0 deletions

diff --git a/keyboards/bm16s/bm16s.h b/keyboards/bm16s/bm16s.h
new file mode 100755
index 000000000..9aca8c0e3
--- /dev/null
+++ b/keyboards/bm16s/bm16s.h
@@ -0,0 +1,15 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_4x4( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33  \
+) { \
+	{ K00,   K01,   K02,   K03 }, \
+	{ K10,   K11,   K12,   K13 }, \
+	{ K20,   K21,   K22,   K23 }, \
+	{ K30,   K31,   K32,   K33 }  \
+}
diff --git a/keyboards/bm16s/config.h b/keyboards/bm16s/config.h
new file mode 100755
index 000000000..568e80b39
--- /dev/null
+++ b/keyboards/bm16s/config.h
@@ -0,0 +1,46 @@
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPrepublic
+#define PRODUCT         bm16s
+#define DESCRIPTION     KPrepublic bm16s
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D1, D0, D3, D2 }
+#define MATRIX_COL_PINS { F7, F6, D4, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+    #define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 16
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/bm16s/info.json b/keyboards/bm16s/info.json
new file mode 100644
index 000000000..706453561
--- /dev/null
+++ b/keyboards/bm16s/info.json
@@ -0,0 +1,30 @@
+{
+    "keyboard_name": "bm16s",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 4,
+    "height": 4,
+    "layouts": {
+      "LAYOUT_ortho_4x4": {
+        "key_count": 16,
+        "layout": [
+          {"x":0, "y":0},
+          {"x":1, "y":0},
+          {"x":2, "y":0},
+          {"x":3, "y":0},
+          {"x":0, "y":1},
+          {"x":1, "y":1},
+          {"x":2, "y":1},
+          {"x":3, "y":1},
+          {"x":0, "y":2},
+          {"x":1, "y":2},
+          {"x":2, "y":2},
+          {"x":3, "y":2},
+          {"x":0, "y":3},
+          {"x":1, "y":3},
+          {"x":2, "y":3},
+          {"x":3, "y":3}
+        ]
+      }
+    }
+  }
\ No newline at end of file
diff --git a/keyboards/bm16s/keymaps/default/keymap.c b/keyboards/bm16s/keymaps/default/keymap.c
new file mode 100755
index 000000000..9dd697a0d
--- /dev/null
+++ b/keyboards/bm16s/keymaps/default/keymap.c
@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_ortho_4x4(
+		KC_KP_7, KC_KP_8, KC_KP_9, MO(1),   \
+		KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \
+		KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \
+		KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT  \
+	),
+	[1] = LAYOUT_ortho_4x4(
+		RESET,   BL_STEP, _______, KC_VOLU, \
+		BL_TOGG, BL_DEC,  BL_INC,  KC_VOLD, \
+		RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \
+		RGB_SAI, RGB_SAD, RGB_HUD, _______  \
+	),
+};
\ No newline at end of file
diff --git a/keyboards/bm16s/keymaps/media/keymap.c b/keyboards/bm16s/keymaps/media/keymap.c
new file mode 100755
index 000000000..082879320
--- /dev/null
+++ b/keyboards/bm16s/keymaps/media/keymap.c
@@ -0,0 +1,20 @@
+#include QMK_KEYBOARD_H
+
+#define RGB_BRU RGB_VAI
+#define RGB_BRD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_ortho_4x4(
+		KC_BRIU, _______, _______, KC_VOLU, \
+		KC_BRID, _______, _______, KC_VOLD, \
+		_______, _______, _______, KC_MUTE, \
+		KC_MPRV, KC_MPLY, KC_MNXT, MO(1)    \
+	),
+	[1] = LAYOUT_ortho_4x4(
+		RESET,    _______, _______, _______, \
+		RGB_SPD,  RGB_BRU, RGB_SPI, _______, \
+		RGB_RMOD, RGB_BRD, RGB_MOD, _______, \
+		RGB_TOG,  _______, _______, _______  \
+	),
+};
\ No newline at end of file
diff --git a/keyboards/bm16s/readme.md b/keyboards/bm16s/readme.md
new file mode 100644
index 000000000..097a38008
--- /dev/null
+++ b/keyboards/bm16s/readme.md
@@ -0,0 +1,13 @@
+# bm16s
+
+A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: The PCBs, controllers supported  
+Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm16s:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/bm16s/rules.mk b/keyboards/bm16s/rules.mk
new file mode 100755
index 000000000..f4f1dfd63
--- /dev/null
+++ b/keyboards/bm16s/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = yes  # Mouse keys
+EXTRAKEY_ENABLE  = yes  # Audio control and System control
+CONSOLE_ENABLE   = no   # Console for debug
+COMMAND_ENABLE   = no   # Commands for debug and configuration
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes  # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no   # Enable keyboard backlight functionality
+AUDIO_ENABLE     = no
+RGBLIGHT_ENABLE  = yes
+
+LAYOUTS = ortho_4x4
\ No newline at end of file