Merge pull request #1419 from Wraul/phantom-improvements

Phantom improvements

14 files changed, 632 insertions, 198 deletions

diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h
index 71a33498b..5b7fa62ff 100644
--- a/keyboards/phantom/config.h
+++ b/keyboards/phantom/config.h
@@ -24,9 +24,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0003
-#define MANUFACTURER    PHANTOM
-#define PRODUCT         PHANTOM RGB MOD
-#define DESCRIPTION     QMK keyboard firmware for PHANTOM TKL
+#define MANUFACTURER    bpiphany
+#define PRODUCT         PHANTOM
+#define DESCRIPTION     QMK keyboard firmware for PHANTOM
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -44,6 +44,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
@@ -55,19 +68,79 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* Underlight configuration
- */
-#define RGB_DI_PIN E2
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 20     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
 
 /*
  * Feature disable options
@@ -87,4 +160,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
 #endif
diff --git a/keyboards/phantom/keymaps/default/Makefile b/keyboards/phantom/keymaps/default/Makefile
new file mode 100644
index 000000000..555ac79fa
--- /dev/null
+++ b/keyboards/phantom/keymaps/default/Makefile
@@ -0,0 +1,37 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/phantom/keymaps/default/config.h b/keyboards/phantom/keymaps/default/config.h
new file mode 100644
index 000000000..a3828f7d5
--- /dev/null
+++ b/keyboards/phantom/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/phantom/keymaps/default/keymap.c b/keyboards/phantom/keymaps/default/keymap.c
index a4fc319ac..1568d0a14 100644
--- a/keyboards/phantom/keymaps/default/keymap.c
+++ b/keyboards/phantom/keymaps/default/keymap.c
@@ -1,7 +1,22 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "phantom.h"
 
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+// Helpful defines
+#define _______ KC_TRNS
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -11,92 +26,52 @@
 #define _FL 1
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * ,-----------------------------------------------------------------------------.
-   * |Esc  |f1| f2| f3| f4|  | f5| f6| f7| f8|   | f9|f10|f11|f12|	|Prnt|ScLk|Paus|
-   * |-----------------------------------------------------------|	|--------------|
-   * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |  0| - | = |Backsp |	| Ins|Home|PgUp|
-   * |-----------------------------------------------------------|	|--------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|	| Del| End|PgDn|
-   * |-----------------------------------------------------------|	`--------------'
-   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-   * |-----------------------------------------------------------|		 ,----.
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |		 | Up |
-   * |-----------------------------------------------------------|	 ,-------------.
-   * |Ctrl|Gui |Alt |      Space            |ALT |GUI |_FL |CTRL |	 |Lft| Dn |Rig |
-   * `-----------------------------------------------------------'	 `-------------'
-   */
-[_BL] = KEYMAP(
-  KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
-  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
-  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
-  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  \
-  KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
-  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-
-  /* Keymap _FL: Function Layer
-   * ,-----------------------------------------------------------------------------.
-   * |     |  |   |   |   |  |   |   |   |   |   |   |   |   |   |	|    |    |    |
-   * |-----------------------------------------------------------|	|--------------|
-   * |   |   |   |   |   |   |   |   |   |   |   |   |   | Reset |	|    |    |    |
-   * |-----------------------------------------------------------|	|--------------|
-   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |	|    |    |    |
-   * |-----------------------------------------------------------|	`--------------'
-   * |       |   |   |   |   |   |   |   |   |   |   |   |       |
-   * |-----------------------------------------------------------|		 ,----.
-   * |        | F1| F2| F3| F4| F5|F6 |F7 |F8 |   |   |          |		 |    |
-   * |-----------------------------------------------------------|	 ,-------------.
-   * |    |    |    |                       |    |    |    |     |	 |   |    |    |
-   * `-----------------------------------------------------------'	 `-------------'
-   */
-[_FL] = KEYMAP(
-  #ifdef RGBLIGHT_ENABLE
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,  KC_TRNS, KC_UP, KC_TRNS, \
-  KC_TRNS,  RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-  #else
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,  KC_TRNS, KC_UP, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-  #endif
+    [_BL] = KEYMAP(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,       KC_PSCR, KC_SLCK, KC_BRK,  \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_DEL,  KC_END,  KC_PGDN, \
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,                                  \
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,               KC_UP,            \
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(_FL), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT  \
+    ),
+    [_FL] = KEYMAP(
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT,      KC_MUTE, KC_VOLD, KC_VOLU, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSEL,      _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                                 \
+        _______,          _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, _______,          _______,               _______,          \
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______,      _______, _______, _______  \
+    ),
 };
 
-enum function_id {
-    SHIFT_ESC,
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            if (record->event.pressed) {
+                register_code(KC_RSFT);
+            } else {
+                unregister_code(KC_RSFT);
+            }
+            break;
+    }
+    return MACRO_NONE;
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
 
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
 }
diff --git a/keyboards/phantom/keymaps/default/readme.md b/keyboards/phantom/keymaps/default/readme.md
new file mode 100644
index 000000000..f58f4f0f3
--- /dev/null
+++ b/keyboards/phantom/keymaps/default/readme.md
@@ -0,0 +1,45 @@
+# Keymap for a standard winkey ANSI configuration of the Phantom
+
+A basic keymap intended for a Phantom using the standard ANSI layout.
+
+See [keymap.c](keymap.c) for details.
+
+## Layers
+
+The keymap have two layers. To access the functions on the second layer, hold down `Fn` and press the corresponding key.
+
+### Layer 1: Default Layer
+     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     `---'   `---------------' `---------------' `---------------' `-----------'
+     ,-----------------------------------------------------------. ,-----------.
+     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
+     |-----------------------------------------------------------| |-----------|
+     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
+     |-----------------------------------------------------------| '-----------'
+     |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+     |-----------------------------------------------------------|     ,---.
+     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |
+     |-----------------------------------------------------------| ,-----------.
+     |Ctl|Gui|Alt|             Space             |Alt|Gui|Fn |Ctl| |Lef|Dow|Rig|
+     `-----------------------------------------------------------' `-----------'
+
+### Layer 2: Function Layer
+     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     |   |   |   |   |   |   | |   |   |   |   | |Stp|Ply|Prv|Nxt| |Mut|Vo-|Vo+|
+     `---'   `---------------' `---------------' `---------------' `-----------'
+     ,-----------------------------------------------------------. ,-----------.
+     |   |   |   |   |   |   |   |   |   |   |   |   |   |       | |   |   |   |
+     |-----------------------------------------------------------| |-----------|
+     |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |   |   |   |
+     |-----------------------------------------------------------| '-----------'
+     |      |   |   |   |   |   |   |   |   |   |   |   | Media  |
+     |-----------------------------------------------------------|     ,---.
+     |        |   |   |Cal|   |   |   |   |   |   |   |          |     |   |
+     |-----------------------------------------------------------| ,-----------.
+     |   |   |   |                               |   |   |   |   | |   |   |   |
+     `-----------------------------------------------------------' `-----------'
+
+## Building
+
+To build the firmware with the default keymap, run `make default`.
diff --git a/keyboards/phantom/keymaps/rgbmod/Makefile b/keyboards/phantom/keymaps/rgbmod/Makefile
new file mode 100644
index 000000000..38c23a1b8
--- /dev/null
+++ b/keyboards/phantom/keymaps/rgbmod/Makefile
@@ -0,0 +1,37 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/phantom/keymaps/rgbmod/config.h b/keyboards/phantom/keymaps/rgbmod/config.h
new file mode 100644
index 000000000..a3828f7d5
--- /dev/null
+++ b/keyboards/phantom/keymaps/rgbmod/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/phantom/keymaps/rgbmod/keymap.c b/keyboards/phantom/keymaps/rgbmod/keymap.c
new file mode 100644
index 000000000..baef27a26
--- /dev/null
+++ b/keyboards/phantom/keymaps/rgbmod/keymap.c
@@ -0,0 +1,77 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "phantom.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BL] = KEYMAP(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,       KC_PSCR, KC_SLCK, KC_PAUS, \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_DEL,  KC_END,  KC_PGDN, \
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,                                  \
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,               KC_UP,            \
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(_FL), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT  \
+    ),
+    [_FL] = KEYMAP(
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,         _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,            _______,                                  \
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,          _______,                _______,          \
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______,       _______, _______, _______  \
+    ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            if (record->event.pressed) {
+                register_code(KC_RSFT);
+            } else {
+                unregister_code(KC_RSFT);
+            }
+            break;
+    }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/phantom/led.c b/keyboards/phantom/led.c
deleted file mode 100644
index 69dba7d40..000000000
--- a/keyboards/phantom/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB |= (1<<6);
-	DDRB |= (1<<7);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<6);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<6);
-    }
-	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        // Turn scrolllock on
-        PORTB |= (1<<7);
-    } else {
-        // Turn scrolllock off
-        PORTB &= ~(1<<7);
-    }
-}
diff --git a/keyboards/phantom/phantom.c b/keyboards/phantom/phantom.c
index d53af491f..2bf1631b9 100644
--- a/keyboards/phantom/phantom.c
+++ b/keyboards/phantom/phantom.c
@@ -1,9 +1,63 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "phantom.h"
-#include "led.h"
 
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+    DDRB |= (1<<6) | (1<<7); // OUT
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    {
+        PORTB |= (1<<6); // HI
+    }
+    else
+    {
+        PORTB &= ~(1<<6); // LO
+    }
+
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+    {
+        PORTB |= (1<<7); // HI
+    }
+    else
+    {
+        PORTB &= ~(1<<7); // LO
+    }
+
+    led_set_user(usb_led);
+}
diff --git a/keyboards/phantom/phantom.h b/keyboards/phantom/phantom.h
index 420826bec..784fca21f 100644
--- a/keyboards/phantom/phantom.h
+++ b/keyboards/phantom/phantom.h
@@ -1,40 +1,105 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #ifndef PHANTOM_H
 #define PHANTOM_H
 
 #include "quantum.h"
 
-/* Phantom matrix layout
-   * ,-----------------------------------------------------------------------------.
-   * |00   |02| 03| 04| 05|  | 06| 07| 08| 09|   | 0a|0b |0c |0d |	|0e  |0f  |0g  |
-   * |-----------------------------------------------------------|	|--------------|
-   * | 01| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b|  1d   |	|1e  |1f  |1g  |
-   * |-----------------------------------------------------------|	|--------------|
-   * |20   | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|   2d|	| 2e | 2f | 2g |
-   * |-----------------------------------------------------------|	`--------------'
-   * |30     | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d    |
-   * |-----------------------------------------------------------|		 ,----.
-   * | 40     | 42| 43| 44| 45| 46| 47| 48| 49| 4a| 4b| 4d       |		 | 4f |
-   * |-----------------------------------------------------------|	 ,-------------.
-   * | 50 | 51 | 52 |      57               |5a  | 5b | 5c | 5d  |	 | 5e| 5f | 5g |
-   * `-----------------------------------------------------------'	 `-------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-	k00, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
-	k01, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1e, k1f, k1g, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
-	k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4f, \
-	k50, k51, k52, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g  \
-) \
-{ \
-		{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \
-		{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1d, k1e, k1f, k1g}, \
-		{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \
-		{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3d, k3d, k3d, k3d}, \
-		{k40, k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4d, k4f, k4f, k4f},  \
-		{k50, k51, k52, k57, k57, k57, k57, k57, k57, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g} \
+// Keymap utilizing all the possible keys on the PCB.
+#define KEYMAP_7BIT( \
+    K00, K53, K02, K03, K04, K05, K56, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+    K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3E, K3F, K3G, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,      K4E, K4F, K4G, \
+    K50, K51, K52, K54,      K55, K57, K58,           K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+/*          0      1      2      3      4      5      6      7      8      9      A      B      C      D      E      F      G    */  \
+/* 0 */   { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G   }, \
+/* 1 */   { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F,   K1G   }, \
+/* 2 */   { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E,   K2F,   K2G   }, \
+/* 3 */   { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F,   K3G   }, \
+/* 4 */   { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   K4C,   K4D,   K4E,   K4F,   K4G   }, \
+/* 5 */   { K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   KC_NO, K5A,   K5B,   K5C,   K5D,   K5E,   K5F,   K5G   }  \
 }
 
+
+// Keymap for a standard ANSI layout.
+#define KEYMAP( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0E, K0F, K0G, \
+    K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4D,           K4F,      \
+    K50, K51, K52,                K57,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) KEYMAP_7BIT( \
+    K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G,   \
+    K01,   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   KC_NO, K1D,   K1E,   K1F,   K1G,   \
+    K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,          K2E,   K2F,   K2G,   \
+    K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,          KC_NO, KC_NO, KC_NO, \
+    K40,   KC_NO, K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   KC_NO, K4D,          KC_NO, K4F,   KC_NO, \
+    K50,   K51,   K52,   KC_NO,        KC_NO, K57,   KC_NO,               K5A,   K5B,   K5C,   K5D,          K5E,   K5F,   K5G    \
+)
+
+#define KEYMAP_WINKEYLESS( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0E, K0F, K0G, \
+    K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4D,           K4F,      \
+    K50, K51, K52,                K57,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) KEYMAP_7BIT( \
+    K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G,   \
+    K01,   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   KC_NO, K1D,   K1E,   K1F,   K1G,   \
+    K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,          K2E,   K2F,   K2G,   \
+    K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,          KC_NO, KC_NO, KC_NO, \
+    K40,   KC_NO, K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   KC_NO, K4D,          KC_NO, K4F,   KC_NO, \
+    K50,   K51,   K52,   KC_NO,        KC_NO, K57,   KC_NO,               KC_NO, K5B,   K5C,   K5D,          K5E,   K5F,   K5G    \
+)
+
+#define KEYMAP_ISO( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0E, K0F, K0G, \
+    K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4D,           K4F,      \
+    K50, K51, K52,                K57,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) KEYMAP_7BIT( \
+    K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G,   \
+    K01,   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   KC_NO, K1D,   K1E,   K1F,   K1G,   \
+    K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   KC_NO,        K2E,   K2F,   K2G,   \
+    K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,          KC_NO, KC_NO, KC_NO, \
+    K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   KC_NO, K4D,          KC_NO, K4F,   KC_NO, \
+    K50,   K51,   K52,   KC_NO,        KC_NO, K57,   KC_NO,               K5A,   K5B,   K5C,   K5D,          K5E,   K5F,   K5G    \
+)
+
+#define KEYMAP_ISO_WINKEYLESS( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0E, K0F, K0G, \
+    K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4D,           K4F,      \
+    K50, K51, K52,                K57,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) KEYMAP_7BIT( \
+    K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G,   \
+    K01,   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   KC_NO, K1D,   K1E,   K1F,   K1G,   \
+    K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   KC_NO,        K2E,   K2F,   K2G,   \
+    K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,          KC_NO, KC_NO, KC_NO, \
+    K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   KC_NO, K4D,          KC_NO, K4F,   KC_NO, \
+    K50,   K51,   K52,   KC_NO,        KC_NO, K57,   KC_NO,               KC_NO, K5B,   K5C,   K5D,          K5E,   K5F,   K5G    \
+)
+
 #endif
diff --git a/keyboards/phantom/pinout.txt b/keyboards/phantom/pinout.txt
deleted file mode 100644
index 415ad46d9..000000000
--- a/keyboards/phantom/pinout.txt
+++ /dev/null
@@ -1 +0,0 @@
-For WS2812B LED strip support, connect DIN from strip to PE2 on Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg)
\ No newline at end of file
diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md
index 190f738fa..614c21fda 100644
--- a/keyboards/phantom/readme.md
+++ b/keyboards/phantom/readme.md
@@ -1,4 +1,48 @@
 Phantom keyboard firmware
-======================
+=========================
 
-TODO: to be updated.
+A community-developed keyboard PCB designed to fit inside the case of a Filco Majestouch.
+
+See the [Deskthority wiki](https://deskthority.net/wiki/Phantom) for more information.
+
+## Bootloader
+
+The Phantom uses a [Teensy 2.0](https://www.pjrc.com/store/teensy.html) as a controller.
+
+The Teensy has a special bootloader that can be accessed by pressing the button on the Teensy PCB. It is also possible to use Boot Magic and Command to access the bootloader.
+
+To write the firmware to the Teensy use [Teensy loader](https://www.pjrc.com/teensy/loader.html).
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see the [documentation](https://docs.qmk.fm).
+
+## RGB underlight
+
+It is possible to connect a WS2812B LED strip to the Teensy for RGB underlight support.
+
+For this to work the DIN connection on the WS2812B strip should be soldered to PE2 on the Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg).
+
+See [rgbmod](keymaps/rgbmod) for a keymap that utilizes the RGB underlight feature.
+
+## Building
+
+The Phantom allows for a huge amount of different layouts.
+
+Depending on which layout and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/phantom](/keyboards/phantom) folder.
+
+### Custom keymaps
+
+To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/Keymap.html) for details on how to modify the keymap.
+
+To make it easy to define keymaps for the most common layouts a few macros are provided.
+
+| Layout          | Macro                     |
+| --------------- | ------------------------- |
+| Winkey ANSI     | `KEYMAP()`                |
+| Winkeyless ANSI | `KEYMAP_WINKEYLESS()`     |
+| Winkey ISO      | `KEYMAP_ISO()`            |
+| Winkeyless ISO  | `KEYMAP_ISO_WINKEYLESS()` |
+| 7BIT            | `KEYMAP_7BIT()`           |
+
+To build the firmware with a custom keymap, run `make <keymap name>`
diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk
index c6b8ca6c3..c07593961 100644
--- a/keyboards/phantom/rules.mk
+++ b/keyboards/phantom/rules.mk
@@ -1,7 +1,3 @@
-
-
-SRC = led.c
-
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -53,17 +49,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?=yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches