Normalize line endings

39 files changed, 6322 insertions, 6322 deletions

diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
index 31319ef57..2809c9d18 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
@@ -1,49 +1,49 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config =

-{

-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

-};

-#endif

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-void __early_init(void) {

-

-  stm32_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-void boardInit(void) {

-}

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
index 7253e7782..b31d74307 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
@@ -1,166 +1,166 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for a Generic STM32F103 board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_GENERIC_STM32_F103

-#define BOARD_NAME              "Generic STM32F103x board"

-

-/*

- * Board frequencies.

- */

-#define STM32_LSECLK            32768

-#define STM32_HSECLK            8000000

-

-/*

- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

- */

-#define STM32F103xB

-

-/*

- * IO pins assignments

- */

-

-/* on-board */

-

-#define GPIOC_LED               13

-#define GPIOD_OSC_IN            0

-#define GPIOD_OSC_OUT           1

-

-/* In case your board has a "USB enable" hardware

-   controlled by a pin, define it here. (It could be just

-   a 1.5k resistor connected to D+ line.)

-*/

-/*

-#define GPIOB_USB_DISC          10

-*/

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- *

- * The digits have the following meaning:

- *   0 - Analog input.

- *   1 - Push Pull output 10MHz.

- *   2 - Push Pull output 2MHz.

- *   3 - Push Pull output 50MHz.

- *   4 - Digital input.

- *   5 - Open Drain output 10MHz.

- *   6 - Open Drain output 2MHz.

- *   7 - Open Drain output 50MHz.

- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

- *   9 - Alternate Push Pull output 10MHz.

- *   A - Alternate Push Pull output 2MHz.

- *   B - Alternate Push Pull output 50MHz.

- *   C - Reserved.

- *   D - Alternate Open Drain output 10MHz.

- *   E - Alternate Open Drain output 2MHz.

- *   F - Alternate Open Drain output 50MHz.

- * Please refer to the STM32 Reference Manual for details.

- */

-

-/*

- * Port A setup.

- * Everything input with pull-up except:

- * PA2  - Alternate output  (USART2 TX).

- * PA3  - Normal input      (USART2 RX).

- * PA9  - Alternate output  (USART1 TX).

- * PA10 - Normal input      (USART1 RX).

- */

-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */

-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */

-#define VAL_GPIOAODR            0xFFFFFFFF

-

-/*

- * Port B setup.

- * Everything input with pull-up except:

- * PB10    - Push Pull output  (USB switch).

- */

-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */

-#define VAL_GPIOBODR            0xFFFFFFFF

-

-/*

- * Port C setup.

- * Everything input with pull-up except:

- * PC13    - Push Pull output  (LED).

- */

-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */

-#define VAL_GPIOCODR            0xFFFFFFFF

-

-/*

- * Port D setup.

- * Everything input with pull-up except:

- * PD0  - Normal input (XTAL).

- * PD1  - Normal input (XTAL).

- */

-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

-#define VAL_GPIODODR            0xFFFFFFFF

-

-/*

- * Port E setup.

- * Everything input with pull-up except:

- */

-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

-#define VAL_GPIOEODR            0xFFFFFFFF

-

-/*

- * USB bus activation macro, required by the USB driver.

- */

-/* The point is that most of the generic STM32F103* boards

-   have a 1.5k resistor connected on one end to the D+ line

-   and on the other end to some pin. Or even a slightly more

-   complicated "USB enable" circuit, controlled by a pin.

-   That should go here.

-

-   However on some boards (e.g. one that I have), there's no

-   such hardware. In which case it's better to not do anything.

-*/

-/*

-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)

-*/

-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);

-

-/*

- * USB bus de-activation macro, required by the USB driver.

- */

-/*

-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)

-*/

-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOC_LED               13
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
index d692c0ee4..48e0e51fe 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
@@ -1,5 +1,5 @@
-# List of all the board related files.

-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c

-

-# Required include directories

-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103

+# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld
index fb141f888..c4ca8b874 100644
--- a/keyboards/chibios_test/ld/MKL26Z64.ld
+++ b/keyboards/chibios_test/ld/MKL26Z64.ld
@@ -1,105 +1,105 @@
-/*

- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com

- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>

- *

- * Permission is hereby granted, free of charge, to any person obtaining

- * a copy of this software and associated documentation files (the "Software"),

- * to deal in the Software without restriction, including without limitation

- * the rights to use, copy, modify, merge, publish, distribute, sublicense,

- * and/or sell copies of the Software, and to permit persons to whom the

- * Software is furnished to do so, subject to the following conditions:

- *

- * The above copyright notice and this permission notice shall be included in

- * all copies or substantial portions of the Software.

- *

- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

- * SOFTWARE.

- */

-

-/*

- * KL26Z64 memory setup.

- */

-MEMORY

-{

-  flash0   : org = 0x00000000, len = 0x100

-  flash1   : org = 0x00000400, len = 0x10

-  flash2   : org = 0x00000410, len = 62k - 0x410

-  flash3   : org = 0x0000F800, len = 2k

-  flash4   : org = 0x00000000, len = 0

-  flash5   : org = 0x00000000, len = 0

-  flash6   : org = 0x00000000, len = 0

-  flash7   : org = 0x00000000, len = 0

-  ram0     : org = 0x1FFFF800, len = 8k

-  ram1     : org = 0x00000000, len = 0

-  ram2     : org = 0x00000000, len = 0

-  ram3     : org = 0x00000000, len = 0

-  ram4     : org = 0x00000000, len = 0

-  ram5     : org = 0x00000000, len = 0

-  ram6     : org = 0x00000000, len = 0

-  ram7     : org = 0x00000000, len = 0

-}

-

-/* Flash region for the configuration bytes.*/

-SECTIONS

-{

-  .cfmprotect : ALIGN(4) SUBALIGN(4)

-  {

-    KEEP(*(.cfmconfig))

-  } > flash1

-}

-

-/* For each data/text section two region are defined, a virtual region

-   and a load region (_LMA suffix).*/

-

-/* Flash region to be used for exception vectors.*/

-REGION_ALIAS("VECTORS_FLASH", flash0);

-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for constructors and destructors.*/

-REGION_ALIAS("XTORS_FLASH", flash2);

-REGION_ALIAS("XTORS_FLASH_LMA", flash2);

-

-/* Flash region to be used for code text.*/

-REGION_ALIAS("TEXT_FLASH", flash2);

-REGION_ALIAS("TEXT_FLASH_LMA", flash2);

-

-/* Flash region to be used for read only data.*/

-REGION_ALIAS("RODATA_FLASH", flash2);

-REGION_ALIAS("RODATA_FLASH_LMA", flash2);

-

-/* Flash region to be used for various.*/

-REGION_ALIAS("VARIOUS_FLASH", flash2);

-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);

-

-/* Flash region to be used for RAM(n) initialization data.*/

-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);

-

-/* RAM region to be used for Main stack. This stack accommodates the processing

-   of all exceptions and interrupts.*/

-REGION_ALIAS("MAIN_STACK_RAM", ram0);

-

-/* RAM region to be used for the process stack. This is the stack used by

-   the main() function.*/

-REGION_ALIAS("PROCESS_STACK_RAM", ram0);

-

-/* RAM region to be used for data segment.*/

-REGION_ALIAS("DATA_RAM", ram0);

-REGION_ALIAS("DATA_RAM_LMA", flash2);

-

-/* RAM region to be used for BSS segment.*/

-REGION_ALIAS("BSS_RAM", ram0);

-

-/* RAM region to be used for the default heap.*/

-REGION_ALIAS("HEAP_RAM", ram0);

-

-__eeprom_workarea_start__ = ORIGIN(flash3);

-__eeprom_workarea_size__  = LENGTH(flash3);

-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;

-

-/* Generic rules inclusion.*/

-INCLUDE rules.ld

+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
index 00613328e..f9bfe9c00 100644
--- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
+++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
@@ -1,88 +1,88 @@
-/*

-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/*

- * ST32F103xB memory setup for use with the maplemini bootloader.

- * You will have to

- * 	#define CORTEX_VTOR_INIT 0x5000

- * in your projects chconf.h

- */

-MEMORY

-{

-    flash0  : org = 0x08002000, len = 128k - 0x2000

-    flash1  : org = 0x00000000, len = 0

-    flash2  : org = 0x00000000, len = 0

-    flash3  : org = 0x00000000, len = 0

-    flash4  : org = 0x00000000, len = 0

-    flash5  : org = 0x00000000, len = 0

-    flash6  : org = 0x00000000, len = 0

-    flash7  : org = 0x00000000, len = 0

-    ram0    : org = 0x20000000, len = 20k

-    ram1    : org = 0x00000000, len = 0

-    ram2    : org = 0x00000000, len = 0

-    ram3    : org = 0x00000000, len = 0

-    ram4    : org = 0x00000000, len = 0

-    ram5    : org = 0x00000000, len = 0

-    ram6    : org = 0x00000000, len = 0

-    ram7    : org = 0x00000000, len = 0

-}

-

-/* For each data/text section two region are defined, a virtual region

-   and a load region (_LMA suffix).*/

-

-/* Flash region to be used for exception vectors.*/

-REGION_ALIAS("VECTORS_FLASH", flash0);

-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for constructors and destructors.*/

-REGION_ALIAS("XTORS_FLASH", flash0);

-REGION_ALIAS("XTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for code text.*/

-REGION_ALIAS("TEXT_FLASH", flash0);

-REGION_ALIAS("TEXT_FLASH_LMA", flash0);

-

-/* Flash region to be used for read only data.*/

-REGION_ALIAS("RODATA_FLASH", flash0);

-REGION_ALIAS("RODATA_FLASH_LMA", flash0);

-

-/* Flash region to be used for various.*/

-REGION_ALIAS("VARIOUS_FLASH", flash0);

-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);

-

-/* Flash region to be used for RAM(n) initialization data.*/

-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);

-

-/* RAM region to be used for Main stack. This stack accommodates the processing

-   of all exceptions and interrupts.*/

-REGION_ALIAS("MAIN_STACK_RAM", ram0);

-

-/* RAM region to be used for the process stack. This is the stack used by

-   the main() function.*/

-REGION_ALIAS("PROCESS_STACK_RAM", ram0);

-

-/* RAM region to be used for data segment.*/

-REGION_ALIAS("DATA_RAM", ram0);

-REGION_ALIAS("DATA_RAM_LMA", flash0);

-

-/* RAM region to be used for BSS segment.*/

-REGION_ALIAS("BSS_RAM", ram0);

-

-/* RAM region to be used for the default heap.*/

-REGION_ALIAS("HEAP_RAM", ram0);

-

-/* Generic rules inclusion.*/

-INCLUDE rules.ld

+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 128k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
index 3d877aaa2..faca3defd 100644
--- a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
@@ -1,171 +1,171 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-/*

- * STM32F0xx drivers configuration.

- * The following settings override the default settings present in

- * the various device driver implementation headers.

- * Note that the settings for each driver only have effect if the whole

- * driver is enabled in halconf.h.

- *

- * IRQ priorities:

- * 3...0       Lowest...Highest.

- *

- * DMA priorities:

- * 0...3        Lowest...Highest.

- */

-

-#define STM32F0xx_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-#define STM32_NO_INIT                       FALSE

-#define STM32_PVD_ENABLE                    FALSE

-#define STM32_PLS                           STM32_PLS_LEV0

-#define STM32_HSI_ENABLED                   TRUE

-#define STM32_HSI14_ENABLED                 TRUE

-#define STM32_HSI48_ENABLED                 FALSE

-#define STM32_LSI_ENABLED                   TRUE

-#define STM32_HSE_ENABLED                   FALSE

-#define STM32_LSE_ENABLED                   FALSE

-#define STM32_SW                            STM32_SW_PLL

-#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2

-#define STM32_PREDIV_VALUE                  1

-#define STM32_PLLMUL_VALUE                  12

-#define STM32_HPRE                          STM32_HPRE_DIV1

-#define STM32_PPRE                          STM32_PPRE_DIV1

-#define STM32_ADCSW                         STM32_ADCSW_HSI14

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_ADCSW                         STM32_ADCSW_HSI14

-#define STM32_USBSW                         STM32_USBSW_HSI48

-#define STM32_CECSW                         STM32_CECSW_HSI

-#define STM32_I2C1SW                        STM32_I2C1SW_HSI

-#define STM32_USART1SW                      STM32_USART1SW_PCLK

-#define STM32_RTCSEL                        STM32_RTCSEL_LSI

-

-/*

- * ADC driver system settings.

- */

-#define STM32_ADC_USE_ADC1                  FALSE

-#define STM32_ADC_ADC1_DMA_PRIORITY         2

-#define STM32_ADC_IRQ_PRIORITY              2

-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2

-

-/*

- * EXT driver system settings.

- */

-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3

-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3

-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3

-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3

-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3

-

-/*

- * GPT driver system settings.

- */

-#define STM32_GPT_USE_TIM1                  FALSE

-#define STM32_GPT_USE_TIM2                  FALSE

-#define STM32_GPT_USE_TIM3                  FALSE

-#define STM32_GPT_USE_TIM14                 FALSE

-#define STM32_GPT_TIM1_IRQ_PRIORITY         2

-#define STM32_GPT_TIM2_IRQ_PRIORITY         2

-#define STM32_GPT_TIM3_IRQ_PRIORITY         2

-#define STM32_GPT_TIM14_IRQ_PRIORITY        2

-

-/*

- * I2C driver system settings.

- */

-#define STM32_I2C_USE_I2C1                  FALSE

-#define STM32_I2C_USE_I2C2                  FALSE

-#define STM32_I2C_BUSY_TIMEOUT              50

-#define STM32_I2C_I2C1_IRQ_PRIORITY         3

-#define STM32_I2C_I2C2_IRQ_PRIORITY         3

-#define STM32_I2C_USE_DMA                   TRUE

-#define STM32_I2C_I2C1_DMA_PRIORITY         1

-#define STM32_I2C_I2C2_DMA_PRIORITY         1

-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")

-

-/*

- * ICU driver system settings.

- */

-#define STM32_ICU_USE_TIM1                  FALSE

-#define STM32_ICU_USE_TIM2                  FALSE

-#define STM32_ICU_USE_TIM3                  FALSE

-#define STM32_ICU_TIM1_IRQ_PRIORITY         3

-#define STM32_ICU_TIM2_IRQ_PRIORITY         3

-#define STM32_ICU_TIM3_IRQ_PRIORITY         3

-

-/*

- * PWM driver system settings.

- */

-#define STM32_PWM_USE_ADVANCED              FALSE

-#define STM32_PWM_USE_TIM1                  FALSE

-#define STM32_PWM_USE_TIM2                  FALSE

-#define STM32_PWM_USE_TIM3                  FALSE

-#define STM32_PWM_TIM1_IRQ_PRIORITY         3

-#define STM32_PWM_TIM2_IRQ_PRIORITY         3

-#define STM32_PWM_TIM3_IRQ_PRIORITY         3

-

-/*

- * SERIAL driver system settings.

- */

-#define STM32_SERIAL_USE_USART1             FALSE

-#define STM32_SERIAL_USE_USART2             FALSE

-#define STM32_SERIAL_USART1_PRIORITY        3

-#define STM32_SERIAL_USART2_PRIORITY        3

-

-/*

- * SPI driver system settings.

- */

-#define STM32_SPI_USE_SPI1                  FALSE

-#define STM32_SPI_USE_SPI2                  FALSE

-#define STM32_SPI_SPI1_DMA_PRIORITY         1

-#define STM32_SPI_SPI2_DMA_PRIORITY         1

-#define STM32_SPI_SPI1_IRQ_PRIORITY         2

-#define STM32_SPI_SPI2_IRQ_PRIORITY         2

-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")

-

-/*

- * ST driver system settings.

- */

-#define STM32_ST_IRQ_PRIORITY               2

-#define STM32_ST_USE_TIMER                  2

-

-/*

- * UART driver system settings.

- */

-#define STM32_UART_USE_USART1               FALSE

-#define STM32_UART_USE_USART2               FALSE

-#define STM32_UART_USART1_IRQ_PRIORITY      3

-#define STM32_UART_USART2_IRQ_PRIORITY      3

-#define STM32_UART_USART1_DMA_PRIORITY      0

-#define STM32_UART_USART2_DMA_PRIORITY      0

-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")

-

-/*

- * USB driver system settings.

- */

-#define STM32_USB_USE_USB1                  TRUE

-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE

-#define STM32_USB_USB1_LP_IRQ_PRIORITY      3

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
index 626332a6a..276829216 100644
--- a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
@@ -1,209 +1,209 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define STM32F103_MCUCONF

-

-/*

- * STM32F103 drivers configuration.

- * The following settings override the default settings present in

- * the various device driver implementation headers.

- * Note that the settings for each driver only have effect if the whole

- * driver is enabled in halconf.h.

- *

- * IRQ priorities:

- * 15...0       Lowest...Highest.

- *

- * DMA priorities:

- * 0...3        Lowest...Highest.

- */

-

-/*

- * HAL driver system settings.

- */

-#define STM32_NO_INIT                       FALSE

-#define STM32_HSI_ENABLED                   TRUE

-#define STM32_LSI_ENABLED                   FALSE

-#define STM32_HSE_ENABLED                   TRUE

-#define STM32_LSE_ENABLED                   FALSE

-#define STM32_SW                            STM32_SW_PLL

-#define STM32_PLLSRC                        STM32_PLLSRC_HSE

-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1

-#define STM32_PLLMUL_VALUE                  9

-#define STM32_HPRE                          STM32_HPRE_DIV1

-#define STM32_PPRE1                         STM32_PPRE1_DIV2

-#define STM32_PPRE2                         STM32_PPRE2_DIV2

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_USB_CLOCK_REQUIRED            TRUE

-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5

-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK

-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV

-#define STM32_PVD_ENABLE                    FALSE

-#define STM32_PLS                           STM32_PLS_LEV0

-

-/*

- * ADC driver system settings.

- */

-#define STM32_ADC_USE_ADC1                  FALSE

-#define STM32_ADC_ADC1_DMA_PRIORITY         2

-#define STM32_ADC_ADC1_IRQ_PRIORITY         6

-

-/*

- * CAN driver system settings.

- */

-#define STM32_CAN_USE_CAN1                  FALSE

-#define STM32_CAN_CAN1_IRQ_PRIORITY         11

-

-/*

- * EXT driver system settings.

- */

-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6

-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6

-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6

-

-/*

- * GPT driver system settings.

- */

-#define STM32_GPT_USE_TIM1                  FALSE

-#define STM32_GPT_USE_TIM2                  FALSE

-#define STM32_GPT_USE_TIM3                  FALSE

-#define STM32_GPT_USE_TIM4                  FALSE

-#define STM32_GPT_USE_TIM5                  FALSE

-#define STM32_GPT_USE_TIM8                  FALSE

-#define STM32_GPT_TIM1_IRQ_PRIORITY         7

-#define STM32_GPT_TIM2_IRQ_PRIORITY         7

-#define STM32_GPT_TIM3_IRQ_PRIORITY         7

-#define STM32_GPT_TIM4_IRQ_PRIORITY         7

-#define STM32_GPT_TIM5_IRQ_PRIORITY         7

-#define STM32_GPT_TIM8_IRQ_PRIORITY         7

-

-/*

- * I2C driver system settings.

- */

-#define STM32_I2C_USE_I2C1                  FALSE

-#define STM32_I2C_USE_I2C2                  FALSE

-#define STM32_I2C_BUSY_TIMEOUT              50

-#define STM32_I2C_I2C1_IRQ_PRIORITY         5

-#define STM32_I2C_I2C2_IRQ_PRIORITY         5

-#define STM32_I2C_I2C1_DMA_PRIORITY         3

-#define STM32_I2C_I2C2_DMA_PRIORITY         3

-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")

-

-/*

- * ICU driver system settings.

- */

-#define STM32_ICU_USE_TIM1                  FALSE

-#define STM32_ICU_USE_TIM2                  FALSE

-#define STM32_ICU_USE_TIM3                  FALSE

-#define STM32_ICU_USE_TIM4                  FALSE

-#define STM32_ICU_USE_TIM5                  FALSE

-#define STM32_ICU_USE_TIM8                  FALSE

-#define STM32_ICU_TIM1_IRQ_PRIORITY         7

-#define STM32_ICU_TIM2_IRQ_PRIORITY         7

-#define STM32_ICU_TIM3_IRQ_PRIORITY         7

-#define STM32_ICU_TIM4_IRQ_PRIORITY         7

-#define STM32_ICU_TIM5_IRQ_PRIORITY         7

-#define STM32_ICU_TIM8_IRQ_PRIORITY         7

-

-/*

- * PWM driver system settings.

- */

-#define STM32_PWM_USE_ADVANCED              FALSE

-#define STM32_PWM_USE_TIM1                  FALSE

-#define STM32_PWM_USE_TIM2                  FALSE

-#define STM32_PWM_USE_TIM3                  FALSE

-#define STM32_PWM_USE_TIM4                  FALSE

-#define STM32_PWM_USE_TIM5                  FALSE

-#define STM32_PWM_USE_TIM8                  FALSE

-#define STM32_PWM_TIM1_IRQ_PRIORITY         7

-#define STM32_PWM_TIM2_IRQ_PRIORITY         7

-#define STM32_PWM_TIM3_IRQ_PRIORITY         7

-#define STM32_PWM_TIM4_IRQ_PRIORITY         7

-#define STM32_PWM_TIM5_IRQ_PRIORITY         7

-#define STM32_PWM_TIM8_IRQ_PRIORITY         7

-

-/*

- * RTC driver system settings.

- */

-#define STM32_RTC_IRQ_PRIORITY              15

-

-/*

- * SERIAL driver system settings.

- */

-#define STM32_SERIAL_USE_USART1             FALSE

-#define STM32_SERIAL_USE_USART2             FALSE

-#define STM32_SERIAL_USE_USART3             FALSE

-#define STM32_SERIAL_USE_UART4              FALSE

-#define STM32_SERIAL_USE_UART5              FALSE

-#define STM32_SERIAL_USART1_PRIORITY        12

-#define STM32_SERIAL_USART2_PRIORITY        12

-#define STM32_SERIAL_USART3_PRIORITY        12

-#define STM32_SERIAL_UART4_PRIORITY         12

-#define STM32_SERIAL_UART5_PRIORITY         12

-

-/*

- * SPI driver system settings.

- */

-#define STM32_SPI_USE_SPI1                  FALSE

-#define STM32_SPI_USE_SPI2                  FALSE

-#define STM32_SPI_USE_SPI3                  FALSE

-#define STM32_SPI_SPI1_DMA_PRIORITY         1

-#define STM32_SPI_SPI2_DMA_PRIORITY         1

-#define STM32_SPI_SPI3_DMA_PRIORITY         1

-#define STM32_SPI_SPI1_IRQ_PRIORITY         10

-#define STM32_SPI_SPI2_IRQ_PRIORITY         10

-#define STM32_SPI_SPI3_IRQ_PRIORITY         10

-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")

-

-/*

- * ST driver system settings.

- */

-#define STM32_ST_IRQ_PRIORITY               8

-#define STM32_ST_USE_TIMER                  2

-

-/*

- * UART driver system settings.

- */

-#define STM32_UART_USE_USART1               FALSE

-#define STM32_UART_USE_USART2               FALSE

-#define STM32_UART_USE_USART3               FALSE

-#define STM32_UART_USART1_IRQ_PRIORITY      12

-#define STM32_UART_USART2_IRQ_PRIORITY      12

-#define STM32_UART_USART3_IRQ_PRIORITY      12

-#define STM32_UART_USART1_DMA_PRIORITY      0

-#define STM32_UART_USART2_DMA_PRIORITY      0

-#define STM32_UART_USART3_DMA_PRIORITY      0

-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")

-

-/*

- * USB driver system settings.

- */

-#define STM32_USB_USE_USB1                  TRUE

-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE

-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13

-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
index cb36996c3..3294ac7ee 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
@@ -1,524 +1,524 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/chconf.h

- * @brief   Configuration file template.

- * @details A copy of this file must be placed in each project directory, it

- *          contains the application specific kernel settings.

- *

- * @addtogroup config

- * @details Kernel related settings and hooks.

- * @{

- */

-

-#ifndef CHCONF_H

-#define CHCONF_H

-

-#define _CHIBIOS_RT_CONF_

-

-/*===========================================================================*/

-/**

- * @name System timers settings

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   System time counter resolution.

- * @note    Allowed values are 16 or 32 bits.

- */

-#define CH_CFG_ST_RESOLUTION                32

-

-/**

- * @brief   System tick frequency.

- * @details Frequency of the system timer that drives the system ticks. This

- *          setting also defines the system tick time unit.

- */

-#define CH_CFG_ST_FREQUENCY                 1000

-

-/**

- * @brief   Time delta constant for the tick-less mode.

- * @note    If this value is zero then the system uses the classic

- *          periodic tick. This value represents the minimum number

- *          of ticks that is safe to specify in a timeout directive.

- *          The value one is not valid, timeouts are rounded up to

- *          this value.

- */

-#define CH_CFG_ST_TIMEDELTA                 0

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel parameters and options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Round robin interval.

- * @details This constant is the number of system ticks allowed for the

- *          threads before preemption occurs. Setting this value to zero

- *          disables the preemption for threads with equal priority and the

- *          round robin becomes cooperative. Note that higher priority

- *          threads can still preempt, the kernel is always preemptive.

- * @note    Disabling the round robin preemption makes the kernel more compact

- *          and generally faster.

- * @note    The round robin preemption is not supported in tickless mode and

- *          must be set to zero in that case.

- */

-#define CH_CFG_TIME_QUANTUM                 20

-

-/**

- * @brief   Managed RAM size.

- * @details Size of the RAM area to be managed by the OS. If set to zero

- *          then the whole available RAM is used. The core memory is made

- *          available to the heap allocator and/or can be used directly through

- *          the simplified core memory allocator.

- *

- * @note    In order to let the OS manage the whole RAM the linker script must

- *          provide the @p __heap_base__ and @p __heap_end__ symbols.

- * @note    Requires @p CH_CFG_USE_MEMCORE.

- */

-#define CH_CFG_MEMCORE_SIZE                 0

-

-/**

- * @brief   Idle thread automatic spawn suppression.

- * @details When this option is activated the function @p chSysInit()

- *          does not spawn the idle thread. The application @p main()

- *          function becomes the idle thread and must implement an

- *          infinite loop.

- */

-#define CH_CFG_NO_IDLE_THREAD               FALSE

-

-/* Use __WFI in the idle thread for waiting. Does lower the power

- * consumption. */

-#define CORTEX_ENABLE_WFI_IDLE              TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Performance options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   OS optimization.

- * @details If enabled then time efficient rather than space efficient code

- *          is used when two possible implementations exist.

- *

- * @note    This is not related to the compiler optimization options.

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_OPTIMIZE_SPEED               TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Subsystem options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Time Measurement APIs.

- * @details If enabled then the time measurement APIs are included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_TM                       FALSE

-

-/**

- * @brief   Threads registry APIs.

- * @details If enabled then the registry APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_REGISTRY                 TRUE

-

-/**

- * @brief   Threads synchronization APIs.

- * @details If enabled then the @p chThdWait() function is included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_WAITEXIT                 TRUE

-

-/**

- * @brief   Semaphores APIs.

- * @details If enabled then the Semaphores APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_SEMAPHORES               TRUE

-

-/**

- * @brief   Semaphores queuing mode.

- * @details If enabled then the threads are enqueued on semaphores by

- *          priority rather than in FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

-

-/**

- * @brief   Mutexes APIs.

- * @details If enabled then the mutexes APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MUTEXES                  TRUE

-

-/**

- * @brief   Enables recursive behavior on mutexes.

- * @note    Recursive mutexes are heavier and have an increased

- *          memory footprint.

- *

- * @note    The default is @p FALSE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

-

-/**

- * @brief   Conditional Variables APIs.

- * @details If enabled then the conditional variables APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_CONDVARS                 TRUE

-

-/**

- * @brief   Conditional Variables APIs with timeout.

- * @details If enabled then the conditional variables APIs with timeout

- *          specification are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_CONDVARS.

- */

-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

-

-/**

- * @brief   Events Flags APIs.

- * @details If enabled then the event flags APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_EVENTS                   TRUE

-

-/**

- * @brief   Events Flags APIs with timeout.

- * @details If enabled then the events APIs with timeout specification

- *          are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_EVENTS.

- */

-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

-

-/**

- * @brief   Synchronous Messages APIs.

- * @details If enabled then the synchronous messages APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MESSAGES                 TRUE

-

-/**

- * @brief   Synchronous Messages queuing mode.

- * @details If enabled then messages are served by priority rather than in

- *          FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_MESSAGES.

- */

-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

-

-/**

- * @brief   Mailboxes APIs.

- * @details If enabled then the asynchronous messages (mailboxes) APIs are

- *          included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_MAILBOXES                TRUE

-

-/**

- * @brief   Core Memory Manager APIs.

- * @details If enabled then the core memory manager APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMCORE                  TRUE

-

-/**

- * @brief   Heap Allocator APIs.

- * @details If enabled then the memory heap allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

- *          @p CH_CFG_USE_SEMAPHORES.

- * @note    Mutexes are recommended.

- */

-#define CH_CFG_USE_HEAP                     TRUE

-

-/**

- * @brief   Memory Pools Allocator APIs.

- * @details If enabled then the memory pools allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMPOOLS                 TRUE

-

-/**

- * @brief   Dynamic Threads APIs.

- * @details If enabled then the dynamic threads creation APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_WAITEXIT.

- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

- */

-#define CH_CFG_USE_DYNAMIC                  TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Debug options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Debug option, kernel statistics.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_STATISTICS                   FALSE

-

-/**

- * @brief   Debug option, system state check.

- * @details If enabled the correct call protocol for system APIs is checked

- *          at runtime.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE

-

-/**

- * @brief   Debug option, parameters checks.

- * @details If enabled then the checks on the API functions input

- *          parameters are activated.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_CHECKS                TRUE

-

-/**

- * @brief   Debug option, consistency checks.

- * @details If enabled then all the assertions in the kernel code are

- *          activated. This includes consistency checks inside the kernel,

- *          runtime anomalies and port-defined checks.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_ASSERTS               TRUE

-

-/**

- * @brief   Debug option, trace buffer.

- * @details If enabled then the trace buffer is activated.

- *

- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED

-

-/**

- * @brief   Trace buffer entries.

- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is

- *          different from @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_BUFFER_SIZE            128

-

-/**

- * @brief   Debug option, stack checks.

- * @details If enabled then a runtime stack check is performed.

- *

- * @note    The default is @p FALSE.

- * @note    The stack check is performed in a architecture/port dependent way.

- *          It may not be implemented or some ports.

- * @note    The default failure mode is to halt the system with the global

- *          @p panic_msg variable set to @p NULL.

- */

-#define CH_DBG_ENABLE_STACK_CHECK           TRUE

-

-/**

- * @brief   Debug option, stacks initialization.

- * @details If enabled then the threads working area is filled with a byte

- *          value when a thread is created. This can be useful for the

- *          runtime measurement of the used stack.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_FILL_THREADS                 TRUE

-

-/**

- * @brief   Debug option, threads profiling.

- * @details If enabled then a field is added to the @p thread_t structure that

- *          counts the system ticks occurred while executing the thread.

- *

- * @note    The default is @p FALSE.

- * @note    This debug option is not currently compatible with the

- *          tickless mode.

- */

-#define CH_DBG_THREADS_PROFILING            FALSE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel hooks

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Threads descriptor structure extension.

- * @details User fields added to the end of the @p thread_t structure.

- */

-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

-  /* Add threads custom fields here.*/

-

-/**

- * @brief   Threads initialization hook.

- * @details User initialization code added to the @p chThdInit() API.

- *

- * @note    It is invoked from within @p chThdInit() and implicitly from all

- *          the threads creation APIs.

- */

-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

-  /* Add threads initialization code here.*/                                \

-}

-

-/**

- * @brief   Threads finalization hook.

- * @details User finalization code added to the @p chThdExit() API.

- */

-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

-  /* Add threads finalization code here.*/                                  \

-}

-

-/**

- * @brief   Context switch hook.

- * @details This hook is invoked just before switching between threads.

- */

-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

-  /* Context switch code here.*/                                            \

-}

-

-/**

- * @brief   ISR enter hook.

- */

-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

-  /* IRQ prologue code here.*/                                              \

-}

-

-/**

- * @brief   ISR exit hook.

- */

-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

-  /* IRQ epilogue code here.*/                                              \

-}

-

-/**

- * @brief   Idle thread enter hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to activate a power saving mode.

- */

-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

-  /* Idle-enter code here.*/                                                \

-}

-

-/**

- * @brief   Idle thread leave hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to deactivate a power saving mode.

- */

-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

-  /* Idle-leave code here.*/                                                \

-}

-

-/**

- * @brief   Idle Loop hook.

- * @details This hook is continuously invoked by the idle thread loop.

- */

-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

-  /* Idle loop code here.*/                                                 \

-}

-

-/**

- * @brief   System tick event hook.

- * @details This hook is invoked in the system tick handler immediately

- *          after processing the virtual timers queue.

- */

-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

-  /* System tick event code here.*/                                         \

-}

-

-/**

- * @brief   System halt hook.

- * @details This hook is invoked in case to a system halting error before

- *          the system is halted.

- */

-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

-  /* System halt code here.*/                                               \

-}

-

-/**

- * @brief   Trace hook.

- * @details This hook is invoked each time a new record is written in the

- *          trace buffer.

- */

-#define CH_CFG_TRACE_HOOK(tep) {                                            \

-  /* Trace code here.*/                                                     \

-}

-

-/** @} */

-

-/*===========================================================================*/

-/* Port-specific settings (override port settings defaulted in chcore.h).    */

-/*===========================================================================*/

-

-#endif  /* CHCONF_H */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
index b1d2cd550..0436408b0 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
@@ -1,187 +1,187 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/halconf.h

- * @brief   HAL configuration header.

- * @details HAL configuration file, this file allows to enable or disable the

- *          various device drivers from your application. You may also use

- *          this file in order to override the device drivers default settings.

- *

- * @addtogroup HAL_CONF

- * @{

- */

-

-#ifndef _HALCONF_H_

-#define _HALCONF_H_

-

-#include "mcuconf.h"

-

-/**

- * @brief   Enables the PAL subsystem.

- */

-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

-#define HAL_USE_PAL                 TRUE

-#endif

-

-/**

- * @brief   Enables the ADC subsystem.

- */

-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

-#define HAL_USE_ADC                 FALSE

-#endif

-

-/**

- * @brief   Enables the CAN subsystem.

- */

-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

-#define HAL_USE_CAN                 FALSE

-#endif

-

-/**

- * @brief   Enables the DAC subsystem.

- */

-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

-#define HAL_USE_DAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the EXT subsystem.

- */

-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

-#define HAL_USE_EXT                 FALSE

-#endif

-

-/**

- * @brief   Enables the GPT subsystem.

- */

-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

-#define HAL_USE_GPT                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2C subsystem.

- */

-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

-#define HAL_USE_I2C                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2S subsystem.

- */

-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

-#define HAL_USE_I2S                 FALSE

-#endif

-

-/**

- * @brief   Enables the ICU subsystem.

- */

-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

-#define HAL_USE_ICU                 FALSE

-#endif

-

-/**

- * @brief   Enables the MAC subsystem.

- */

-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

-#define HAL_USE_MAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the MMC_SPI subsystem.

- */

-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_MMC_SPI             FALSE

-#endif

-

-/**

- * @brief   Enables the PWM subsystem.

- */

-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

-#define HAL_USE_PWM                 FALSE

-#endif

-

-/**

- * @brief   Enables the RTC subsystem.

- */

-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

-#define HAL_USE_RTC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SDC subsystem.

- */

-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

-#define HAL_USE_SDC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL subsystem.

- */

-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL              FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL over USB subsystem.

- */

-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL_USB          FALSE

-#endif

-

-/**

- * @brief   Enables the SPI subsystem.

- */

-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_SPI                 FALSE

-#endif

-

-/**

- * @brief   Enables the UART subsystem.

- */

-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

-#define HAL_USE_UART                FALSE

-#endif

-

-/**

- * @brief   Enables the USB subsystem.

- */

-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

-#define HAL_USE_USB                 TRUE

-#endif

-

-/**

- * @brief   Enables the WDG subsystem.

- */

-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

-#define HAL_USE_WDG                 FALSE

-#endif

-

-/*===========================================================================*/

-/* USB driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

-#define USB_USE_WAIT                TRUE

-#endif

-

-#endif /* _HALCONF_H_ */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
index c63659019..2764e8898 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
@@ -1,55 +1,55 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define KL2x_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-#if 1

-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE

-#define KINETIS_PLLCLK_FREQUENCY    96000000UL

-#define KINETIS_SYSCLK_FREQUENCY    48000000UL

-#endif

-

-#if 0

-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

-#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */

-#endif

-

-/*

- * SERIAL driver system settings.

- */

-#define KINETIS_SERIAL_USE_UART0              TRUE

-

-/*

- * USB driver settings

- */

-#define KINETIS_USB_USE_USB0                  TRUE

-/* Need to redefine this, since the default is for K20x */

-/* This is for Teensy LC; you should comment it out (or change to 5)

- * for Teensy 3.x */

-#define KINETIS_USB_USB0_IRQ_PRIORITY         2

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile
index 39a9cc0ae..075b77256 100644
--- a/keyboards/gh60/Makefile
+++ b/keyboards/gh60/Makefile
@@ -1,74 +1,74 @@
-

-

-# MCU name

-#MCU = at90usb1287

-MCU = atmega32u4

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 16000000

-

-

-#

-# LUFA specific

-#

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-# Interrupt driven control endpoint task(+60)

-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

-

-

-# Boot Section Size in *bytes*

-#   Teensy halfKay   512

-#   Teensy++ halfKay 1024

-#   Atmel DFU loader 4096

-#   LUFA bootloader  4096

-#   USBaspLoader     2048

-OPT_DEFS += -DBOOTLOADER_SIZE=4096

-

-

-# Build Options

-#   comment out to disable the options.

-#

-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)

-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)

-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)

-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)

-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration

-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key

-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend

-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality

-# MIDI_ENABLE ?= YES			# MIDI controls

-# UNICODE_ENABLE ?= YES		# Unicode

-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID

-

-

-ifndef QUANTUM_DIR

-	include ../../Makefile

-endif

-

+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES			# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h
index 4813c4e78..97753bc06 100644
--- a/keyboards/gh60/config.h
+++ b/keyboards/gh60/config.h
@@ -1,161 +1,161 @@
-/*

-Copyright 2012 Jun Wako <wakojun@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program. If not, see <http://www.gnu.org/licenses/>.

-*/

-

-#ifndef CONFIG_H

-#define CONFIG_H

-

-#include "config_common.h"

-

-/* USB Device descriptor parameter */

-#define VENDOR_ID    0xFEED

-#define PRODUCT_ID   0x6060

-#define DEVICE_VER   0x0001

-#define MANUFACTURER    geekhack

-#define PRODUCT         GH60

-#define DESCRIPTION     t.m.k. keyboard firmware for GH60

-

-/* key matrix size */

-#define MATRIX_ROWS 5

-#define MATRIX_COLS 14

-

-/*

- * Keyboard Matrix Assignments

- *

- * Change this to how you wired your keyboard

- * COLS: AVR pins used for columns, left to right

- * ROWS: AVR pins used for rows, top to bottom

- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

- *

-*/

- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }

-// Rev A

-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }

-// Rev B/C

-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

-#define UNUSED_PINS

-

-/* COL2ROW or ROW2COL */

-#define DIODE_DIRECTION COL2ROW

-

-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

-#define DEBOUNCING_DELAY 5

-

-/* define if matrix has ghost (lacks anti-ghosting diodes) */

-//#define MATRIX_HAS_GHOST

-

-/* number of backlight levels */

-#define BACKLIGHT_LEVELS 3

-

-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

-#define LOCKING_SUPPORT_ENABLE

-/* Locking resynchronize hack */

-#define LOCKING_RESYNC_ENABLE

-

-/*

- * Force NKRO

- *

- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

- * makefile for this to work.)

- *

- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

- * until the next keyboard reset.

- *

- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

- * fully operational during normal computer usage.

- *

- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by

- * bootmagic, NKRO mode will always be enabled until it is toggled again during a

- * power-up.

- *

- */

-//#define FORCE_NKRO

-

-/*

- * Magic Key Options

- *

- * Magic keys are hotkey commands that allow control over firmware functions of

- * the keyboard. They are best used in combination with the HID Listen program,

- * found here: https://www.pjrc.com/teensy/hid_listen.html

- *

- * The options below allow the magic key functionality to be changed. This is

- * useful if your keyboard/keypad is missing keys and you want magic key support.

- *

- */

-

-/* key combination for magic key command */

-#define IS_COMMAND() ( \

-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \

-)

-

-/* control how magic key switches layers */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false

-

-/* override magic key keymap */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM

-//#define MAGIC_KEY_HELP1     H

-//#define MAGIC_KEY_HELP2     SLASH

-//#define MAGIC_KEY_DEBUG     D

-//#define MAGIC_KEY_DEBUG_MATRIX  X

-//#define MAGIC_KEY_DEBUG_KBD   K

-//#define MAGIC_KEY_DEBUG_MOUSE  M

-//#define MAGIC_KEY_VERSION    V

-//#define MAGIC_KEY_STATUS     S

-//#define MAGIC_KEY_CONSOLE    C

-//#define MAGIC_KEY_LAYER0_ALT1  ESC

-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE

-//#define MAGIC_KEY_LAYER0     0

-//#define MAGIC_KEY_LAYER1     1

-//#define MAGIC_KEY_LAYER2     2

-//#define MAGIC_KEY_LAYER3     3

-//#define MAGIC_KEY_LAYER4     4

-//#define MAGIC_KEY_LAYER5     5

-//#define MAGIC_KEY_LAYER6     6

-//#define MAGIC_KEY_LAYER7     7

-//#define MAGIC_KEY_LAYER8     8

-//#define MAGIC_KEY_LAYER9     9

-//#define MAGIC_KEY_BOOTLOADER   PAUSE

-//#define MAGIC_KEY_LOCK      CAPS

-//#define MAGIC_KEY_EEPROM     E

-//#define MAGIC_KEY_NKRO      N

-//#define MAGIC_KEY_SLEEP_LED   Z

-

-/*

- * Feature disable options

- * These options are also useful to firmware size reduction.

- */

-

-/* disable debug print */

-//#define NO_DEBUG

-

-/* disable print */

-//#define NO_PRINT

-

-/* disable action features */

-//#define NO_ACTION_LAYER

-//#define NO_ACTION_TAPPING

-//#define NO_ACTION_ONESHOT

-//#define NO_ACTION_MACRO

-//#define NO_ACTION_FUNCTION

-

-#endif

+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c
index 255d87de9..f5a158e12 100644
--- a/keyboards/gh60/gh60.c
+++ b/keyboards/gh60/gh60.c
@@ -1,25 +1,25 @@
-#include "gh60.h"

-

-void led_set_kb(uint8_t usb_led) {

-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here

-	

-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {

-		gh60_caps_led_on();

-		} else {

-		gh60_caps_led_off(); 

-    }

-	

-    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {

-		// gh60_esc_led_on();

-		// } else {

-		// gh60_esc_led_off(); 

-    // }

-	

-    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {

-		// gh60_fn_led_on();

-		// } else {

-		// gh60_fn_led_off(); 	

-    // }

-

-	led_set_user(usb_led);	

-}

+#include "gh60.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		gh60_caps_led_on();
+		} else {
+		gh60_caps_led_off(); 
+    }
+	
+    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+		// gh60_esc_led_on();
+		// } else {
+		// gh60_esc_led_off(); 
+    // }
+	
+    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+		// gh60_fn_led_on();
+		// } else {
+		// gh60_fn_led_off(); 	
+    // }
+
+	led_set_user(usb_led);	
+}
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h
index ca30562a4..82624b614 100644
--- a/keyboards/gh60/gh60.h
+++ b/keyboards/gh60/gh60.h
@@ -1,74 +1,74 @@
-#ifndef GH60_H

-#define GH60_H

-

-#include "quantum.h"

-#include "led.h"

-

-/* GH60 LEDs 

- *   GPIO pads

- *   0 F7 WASD LEDs

- *   1 F6 ESC LED

- *   2 F5 FN LED

- *   3 F4 POKER Arrow LEDs

- *   B2 Capslock LED

- *   B0 not connected

- */

-inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }

-inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }

-inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }

-inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }

-inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }

-

-inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }

-inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }

-inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }

-inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }

-inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }

-

-/* GH60 keymap definition macro

- * K2C, K31 and  K3C are extra keys for ISO

- */

-#define KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \

-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \

-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \

-) { \

-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \

-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \

-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \

-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \

-    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \

-}

-

-/* ANSI valiant. No extra keys for ISO */

-#define KEYMAP_ANSI( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \

-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \

-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \

-) KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \

-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \

-    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \

-)

-

-#define KEYMAP_HHKB( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \

-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \

-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \

-) KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \

-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \

-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \

-)

-

-#endif

+#ifndef GH60_H
+#define GH60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* GH60 LEDs 
+ *   GPIO pads
+ *   0 F7 WASD LEDs
+ *   1 F6 ESC LED
+ *   2 F5 FN LED
+ *   3 F4 POKER Arrow LEDs
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
+
+inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* GH60 keymap definition macro
+ * K2C, K31 and  K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \
+    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \
+)
+
+#define KEYMAP_HHKB( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+)
+
+#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile
index 2e69aee29..c73cf1141 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -1,112 +1,112 @@
-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device.

-#                Please customize your programmer settings(PROGRAM_CMD)

-#

-# make teensy = Download the hex file to the device, using teensy_loader_cli.

-#               (must have teensy_loader_cli installed).

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make debug = Start either simulavr or avarice as specified for debugging, 

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-# MCU name

-#MCU = at90usb1287

-MCU = atmega32u4

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 16000000

-

-

-#

-# LUFA specific

-#

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-# Interrupt driven control endpoint task(+60)

-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

-

-

-# Boot Section Size in *bytes*

-#   Teensy halfKay   512

-#   Teensy++ halfKay 1024

-#   Atmel DFU loader 4096

-#   LUFA bootloader  4096

-#   USBaspLoader     2048

-OPT_DEFS += -DBOOTLOADER_SIZE=4096

-

-

-# Build Options

-#   comment out to disable the options.

-#

-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)

-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)

-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)

-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)

-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration

-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key

-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend

-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality

-# MIDI_ENABLE ?= YES		# MIDI controls

-# UNICODE_ENABLE ?= YES		# Unicode

-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID

-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow

-

-ifndef QUANTUM_DIR

-	include ../../../../Makefile

-endif

-

+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES		# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
index 8272875ed..6a29e6b8c 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/keymaps/robotmaxtron/config.h
@@ -1,190 +1,190 @@
-/*

-Copyright 2012 Jun Wako <wakojun@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program. If not, see <http://www.gnu.org/licenses/>.

-*/

-

-#ifndef CONFIG_H

-#define CONFIG_H

-

-#include "config_common.h"

-

-/* USB Device descriptor parameter */

-#define VENDOR_ID    0xFEED

-#define PRODUCT_ID   0x6060

-#define DEVICE_VER   0x0001

-#define MANUFACTURER    geekhack

-#define PRODUCT         GH60

-#define DESCRIPTION     t.m.k. keyboard firmware for GH60

-

-/* key matrix size */

-#define MATRIX_ROWS 5

-#define MATRIX_COLS 14

-

-/*

- * Keyboard Matrix Assignments

- *

- * Change this to how you wired your keyboard

- * COLS: AVR pins used for columns, left to right

- * ROWS: AVR pins used for rows, top to bottom

- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

- *

-*/

- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }

-// Rev A

-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }

-// Rev B/C

-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

-#define UNUSED_PINS

-

-/* COL2ROW or ROW2COL */

-#define DIODE_DIRECTION COL2ROW

-

-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

-#define DEBOUNCING_DELAY 5

-

-/* define if matrix has ghost (lacks anti-ghosting diodes) */

-//#define MATRIX_HAS_GHOST

-

-/* number of backlight levels */

-#define BACKLIGHT_LEVELS 3

-

-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

-#define LOCKING_SUPPORT_ENABLE

-/* Locking resynchronize hack */

-#define LOCKING_RESYNC_ENABLE

-

-/*

- * Force NKRO

- *

- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

- * makefile for this to work.)

- *

- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

- * until the next keyboard reset.

- *

- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

- * fully operational during normal computer usage.

- *

- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by

- * bootmagic, NKRO mode will always be enabled until it is toggled again during a

- * power-up.

- *

- */

-//#define FORCE_NKRO

-

-/*

- * Magic Key Options

- *

- * Magic keys are hotkey commands that allow control over firmware functions of

- * the keyboard. They are best used in combination with the HID Listen program,

- * found here: https://www.pjrc.com/teensy/hid_listen.html

- *

- * The options below allow the magic key functionality to be changed. This is

- * useful if your keyboard/keypad is missing keys and you want magic key support.

- *

- */

-

-/* key combination for magic key command */

-#define IS_COMMAND() ( \

-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \

-)

-

-/* control how magic key switches layers */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false

-

-/* override magic key keymap */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM

-//#define MAGIC_KEY_HELP1     H

-//#define MAGIC_KEY_HELP2     SLASH

-//#define MAGIC_KEY_DEBUG     D

-//#define MAGIC_KEY_DEBUG_MATRIX  X

-//#define MAGIC_KEY_DEBUG_KBD   K

-//#define MAGIC_KEY_DEBUG_MOUSE  M

-//#define MAGIC_KEY_VERSION    V

-//#define MAGIC_KEY_STATUS     S

-//#define MAGIC_KEY_CONSOLE    C

-//#define MAGIC_KEY_LAYER0_ALT1  ESC

-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE

-//#define MAGIC_KEY_LAYER0     0

-//#define MAGIC_KEY_LAYER1     1

-//#define MAGIC_KEY_LAYER2     2

-//#define MAGIC_KEY_LAYER3     3

-//#define MAGIC_KEY_LAYER4     4

-//#define MAGIC_KEY_LAYER5     5

-//#define MAGIC_KEY_LAYER6     6

-//#define MAGIC_KEY_LAYER7     7

-//#define MAGIC_KEY_LAYER8     8

-//#define MAGIC_KEY_LAYER9     9

-//#define MAGIC_KEY_BOOTLOADER   PAUSE

-//#define MAGIC_KEY_LOCK      CAPS

-//#define MAGIC_KEY_EEPROM     E

-//#define MAGIC_KEY_NKRO      N

-//#define MAGIC_KEY_SLEEP_LED   Z

-

-/*

- * Feature disable options

- * These options are also useful to firmware size reduction.

- */

-

-/* disable debug print */

-//#define NO_DEBUG

-

-/* disable print */

-//#define NO_PRINT

-

-/* disable action features */

-//#define NO_ACTION_LAYER

-//#define NO_ACTION_TAPPING

-//#define NO_ACTION_ONESHOT

-//#define NO_ACTION_MACRO

-//#define NO_ACTION_FUNCTION

-

-/*

- * RGB Underglow

- * These settings are for the F4 by default:

- * 

- *

- * #define ws2812_PORTREG  PORTF

- * #define ws2812_DDRREG   DDRF

- * #define ws2812_pin PF4

- * #define RGBLED_NUM 14     // Number of LEDs

- * #define RGBLIGHT_HUE_STEP 10

- * #define RGBLIGHT_SAT_STEP 17

- * #define RGBLIGHT_VAL_STEP 17

- *

- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 

- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 

- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c

-*/

-

-/* Deprecated code below

-#define ws2812_PORTREG  PORTF 

-#define ws2812_DDRREG   DDRF

-#define ws2812_pin PF4

-*/ 

-#define RGB_DI_PIN F4

-#define RGBLIGHT_TIMER

-#define RGBLED_NUM 8         // Number of LEDs

-#define RGBLIGHT_HUE_STEP 8

-#define RGBLIGHT_SAT_STEP 8

-#define RGBLIGHT_VAL_STEP 8

-#endif

+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ * 
+ *
+ * #define ws2812_PORTREG  PORTF
+ * #define ws2812_DDRREG   DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14     // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG  PORTF 
+#define ws2812_DDRREG   DDRF
+#define ws2812_pin PF4
+*/ 
+#define RGB_DI_PIN F4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8         // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt
index 3787f938e..e9bf1983a 100644
--- a/keyboards/gh60/pinout.txt
+++ b/keyboards/gh60/pinout.txt
@@ -1,18 +1,18 @@
-    /* Column pin configuration

-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13

-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)

-    */

-     

-    /* Row pin configuration

-    * row: 0   1   2   3   4

-    * pin: D0  D1  D2  D3  D5

-    */

-     

-    GPIO pads

-    0 F7 WASD LEDs

-    1 F6 ESC LED

-    2 F5 FN LED

-    3 F4 POKER Arrow LEDs

-     

-    B2 Capslock LED

+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
     B0 not connected
\ No newline at end of file
diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md
index 92302d507..ad042483d 100644
--- a/keyboards/gh60/readme.md
+++ b/keyboards/gh60/readme.md
@@ -1,60 +1,60 @@
-## gh60 Rev C keyboard firmware

-

-![gh60 Rev C PCB](gh60revc.jpg)

-

-    /* Column pin configuration

-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13

-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)

-    */

-     

-    /* Row pin configuration

-    * row: 0   1   2   3   4

-    * pin: D0  D1  D2  D3  D5

-    */

-     

-    GPIO pads

-    0 F7 WASD LEDs

-    1 F6 ESC LED

-    2 F5 FN LED

-    3 F4 POKER Arrow LEDs

-     

-    B2 Capslock LED

-    B0 not connected

-	

-Functions to controls LED clusters

-	

-    gh60_caps_led_on()

-    gh60_poker_leds_on()

-    gh60_fn_led_on()

-    gh60_esc_led_on()

-    gh60_wasd_leds_on()

-    

-    gh60_caps_led_off()

-    gh60_poker_leds_off()

-    gh60_fn_led_off()

-    gh60_esc_led_off()

-    gh60_wasd_leds_off()

-	

-======================

-

-## Quantum MK Firmware

-

-For the full Quantum feature list, see [the parent readme.md](/readme.md).

-

-## Building

-

-Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 

-

-Depending on which keymap you would like to use, you will have to compile slightly differently.

-

-### Default

-To build with the default keymap, simply run `make`.

-

-### Other Keymaps

-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.

-

-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:

-```

-$ make KEYMAP=[default|jack|<name>]

-```

-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

+## gh60 Rev C keyboard firmware
+
+![gh60 Rev C PCB](gh60revc.jpg)
+
+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
+    B0 not connected
+	
+Functions to controls LED clusters
+	
+    gh60_caps_led_on()
+    gh60_poker_leds_on()
+    gh60_fn_led_on()
+    gh60_esc_led_on()
+    gh60_wasd_leds_on()
+    
+    gh60_caps_led_off()
+    gh60_poker_leds_off()
+    gh60_fn_led_off()
+    gh60_esc_led_off()
+    gh60_wasd_leds_off()
+	
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity_chibios/chconf.h
index b886c383b..43c845739 100644
--- a/keyboards/infinity_chibios/chconf.h
+++ b/keyboards/infinity_chibios/chconf.h
@@ -1,524 +1,524 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/chconf.h

- * @brief   Configuration file template.

- * @details A copy of this file must be placed in each project directory, it

- *          contains the application specific kernel settings.

- *

- * @addtogroup config

- * @details Kernel related settings and hooks.

- * @{

- */

-

-#ifndef CHCONF_H

-#define CHCONF_H

-

-#define _CHIBIOS_RT_CONF_

-

-/*===========================================================================*/

-/**

- * @name System timers settings

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   System time counter resolution.

- * @note    Allowed values are 16 or 32 bits.

- */

-#define CH_CFG_ST_RESOLUTION                32

-

-/**

- * @brief   System tick frequency.

- * @details Frequency of the system timer that drives the system ticks. This

- *          setting also defines the system tick time unit.

- */

-#define CH_CFG_ST_FREQUENCY                 1000

-

-/**

- * @brief   Time delta constant for the tick-less mode.

- * @note    If this value is zero then the system uses the classic

- *          periodic tick. This value represents the minimum number

- *          of ticks that is safe to specify in a timeout directive.

- *          The value one is not valid, timeouts are rounded up to

- *          this value.

- */

-#define CH_CFG_ST_TIMEDELTA                 0

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel parameters and options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Round robin interval.

- * @details This constant is the number of system ticks allowed for the

- *          threads before preemption occurs. Setting this value to zero

- *          disables the preemption for threads with equal priority and the

- *          round robin becomes cooperative. Note that higher priority

- *          threads can still preempt, the kernel is always preemptive.

- * @note    Disabling the round robin preemption makes the kernel more compact

- *          and generally faster.

- * @note    The round robin preemption is not supported in tickless mode and

- *          must be set to zero in that case.

- */

-#define CH_CFG_TIME_QUANTUM                 20

-

-/**

- * @brief   Managed RAM size.

- * @details Size of the RAM area to be managed by the OS. If set to zero

- *          then the whole available RAM is used. The core memory is made

- *          available to the heap allocator and/or can be used directly through

- *          the simplified core memory allocator.

- *

- * @note    In order to let the OS manage the whole RAM the linker script must

- *          provide the @p __heap_base__ and @p __heap_end__ symbols.

- * @note    Requires @p CH_CFG_USE_MEMCORE.

- */

-#define CH_CFG_MEMCORE_SIZE                 0

-

-/**

- * @brief   Idle thread automatic spawn suppression.

- * @details When this option is activated the function @p chSysInit()

- *          does not spawn the idle thread. The application @p main()

- *          function becomes the idle thread and must implement an

- *          infinite loop.

- */

-#define CH_CFG_NO_IDLE_THREAD               FALSE

-

-/* Use __WFI in the idle thread for waiting. Does lower the power

- * consumption. */

-#define CORTEX_ENABLE_WFI_IDLE              TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Performance options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   OS optimization.

- * @details If enabled then time efficient rather than space efficient code

- *          is used when two possible implementations exist.

- *

- * @note    This is not related to the compiler optimization options.

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_OPTIMIZE_SPEED               TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Subsystem options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Time Measurement APIs.

- * @details If enabled then the time measurement APIs are included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_TM                       FALSE

-

-/**

- * @brief   Threads registry APIs.

- * @details If enabled then the registry APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_REGISTRY                 TRUE

-

-/**

- * @brief   Threads synchronization APIs.

- * @details If enabled then the @p chThdWait() function is included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_WAITEXIT                 TRUE

-

-/**

- * @brief   Semaphores APIs.

- * @details If enabled then the Semaphores APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_SEMAPHORES               TRUE

-

-/**

- * @brief   Semaphores queuing mode.

- * @details If enabled then the threads are enqueued on semaphores by

- *          priority rather than in FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

-

-/**

- * @brief   Mutexes APIs.

- * @details If enabled then the mutexes APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MUTEXES                  TRUE

-

-/**

- * @brief   Enables recursive behavior on mutexes.

- * @note    Recursive mutexes are heavier and have an increased

- *          memory footprint.

- *

- * @note    The default is @p FALSE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

-

-/**

- * @brief   Conditional Variables APIs.

- * @details If enabled then the conditional variables APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_CONDVARS                 TRUE

-

-/**

- * @brief   Conditional Variables APIs with timeout.

- * @details If enabled then the conditional variables APIs with timeout

- *          specification are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_CONDVARS.

- */

-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

-

-/**

- * @brief   Events Flags APIs.

- * @details If enabled then the event flags APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_EVENTS                   TRUE

-

-/**

- * @brief   Events Flags APIs with timeout.

- * @details If enabled then the events APIs with timeout specification

- *          are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_EVENTS.

- */

-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

-

-/**

- * @brief   Synchronous Messages APIs.

- * @details If enabled then the synchronous messages APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MESSAGES                 TRUE

-

-/**

- * @brief   Synchronous Messages queuing mode.

- * @details If enabled then messages are served by priority rather than in

- *          FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_MESSAGES.

- */

-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

-

-/**

- * @brief   Mailboxes APIs.

- * @details If enabled then the asynchronous messages (mailboxes) APIs are

- *          included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_MAILBOXES                TRUE

-

-/**

- * @brief   Core Memory Manager APIs.

- * @details If enabled then the core memory manager APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMCORE                  TRUE

-

-/**

- * @brief   Heap Allocator APIs.

- * @details If enabled then the memory heap allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

- *          @p CH_CFG_USE_SEMAPHORES.

- * @note    Mutexes are recommended.

- */

-#define CH_CFG_USE_HEAP                     TRUE

-

-/**

- * @brief   Memory Pools Allocator APIs.

- * @details If enabled then the memory pools allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMPOOLS                 TRUE

-

-/**

- * @brief   Dynamic Threads APIs.

- * @details If enabled then the dynamic threads creation APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_WAITEXIT.

- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

- */

-#define CH_CFG_USE_DYNAMIC                  TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Debug options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Debug option, kernel statistics.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_STATISTICS                   FALSE

-

-/**

- * @brief   Debug option, system state check.

- * @details If enabled the correct call protocol for system APIs is checked

- *          at runtime.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE

-

-/**

- * @brief   Debug option, parameters checks.

- * @details If enabled then the checks on the API functions input

- *          parameters are activated.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_CHECKS                FALSE

-

-/**

- * @brief   Debug option, consistency checks.

- * @details If enabled then all the assertions in the kernel code are

- *          activated. This includes consistency checks inside the kernel,

- *          runtime anomalies and port-defined checks.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_ASSERTS               FALSE

-

-/**

- * @brief   Debug option, trace buffer.

- * @details If enabled then the trace buffer is activated.

- *

- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED

-

-/**

- * @brief   Trace buffer entries.

- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is

- *          different from @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_BUFFER_SIZE            128

-

-/**

- * @brief   Debug option, stack checks.

- * @details If enabled then a runtime stack check is performed.

- *

- * @note    The default is @p FALSE.

- * @note    The stack check is performed in a architecture/port dependent way.

- *          It may not be implemented or some ports.

- * @note    The default failure mode is to halt the system with the global

- *          @p panic_msg variable set to @p NULL.

- */

-#define CH_DBG_ENABLE_STACK_CHECK           FALSE

-

-/**

- * @brief   Debug option, stacks initialization.

- * @details If enabled then the threads working area is filled with a byte

- *          value when a thread is created. This can be useful for the

- *          runtime measurement of the used stack.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_FILL_THREADS                 FALSE

-

-/**

- * @brief   Debug option, threads profiling.

- * @details If enabled then a field is added to the @p thread_t structure that

- *          counts the system ticks occurred while executing the thread.

- *

- * @note    The default is @p FALSE.

- * @note    This debug option is not currently compatible with the

- *          tickless mode.

- */

-#define CH_DBG_THREADS_PROFILING            FALSE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel hooks

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Threads descriptor structure extension.

- * @details User fields added to the end of the @p thread_t structure.

- */

-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

-  /* Add threads custom fields here.*/

-

-/**

- * @brief   Threads initialization hook.

- * @details User initialization code added to the @p chThdInit() API.

- *

- * @note    It is invoked from within @p chThdInit() and implicitly from all

- *          the threads creation APIs.

- */

-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

-  /* Add threads initialization code here.*/                                \

-}

-

-/**

- * @brief   Threads finalization hook.

- * @details User finalization code added to the @p chThdExit() API.

- */

-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

-  /* Add threads finalization code here.*/                                  \

-}

-

-/**

- * @brief   Context switch hook.

- * @details This hook is invoked just before switching between threads.

- */

-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

-  /* Context switch code here.*/                                            \

-}

-

-/**

- * @brief   ISR enter hook.

- */

-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

-  /* IRQ prologue code here.*/                                              \

-}

-

-/**

- * @brief   ISR exit hook.

- */

-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

-  /* IRQ epilogue code here.*/                                              \

-}

-

-/**

- * @brief   Idle thread enter hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to activate a power saving mode.

- */

-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

-  /* Idle-enter code here.*/                                                \

-}

-

-/**

- * @brief   Idle thread leave hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to deactivate a power saving mode.

- */

-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

-  /* Idle-leave code here.*/                                                \

-}

-

-/**

- * @brief   Idle Loop hook.

- * @details This hook is continuously invoked by the idle thread loop.

- */

-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

-  /* Idle loop code here.*/                                                 \

-}

-

-/**

- * @brief   System tick event hook.

- * @details This hook is invoked in the system tick handler immediately

- *          after processing the virtual timers queue.

- */

-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

-  /* System tick event code here.*/                                         \

-}

-

-/**

- * @brief   System halt hook.

- * @details This hook is invoked in case to a system halting error before

- *          the system is halted.

- */

-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

-  /* System halt code here.*/                                               \

-}

-

-/**

- * @brief   Trace hook.

- * @details This hook is invoked each time a new record is written in the

- *          trace buffer.

- */

-#define CH_CFG_TRACE_HOOK(tep) {                                            \

-  /* Trace code here.*/                                                     \

-}

-

-/** @} */

-

-/*===========================================================================*/

-/* Port-specific settings (override port settings defaulted in chcore.h).    */

-/*===========================================================================*/

-

-#endif  /* CHCONF_H */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity_chibios/halconf.h
index 53538de14..46b37a4f4 100644
--- a/keyboards/infinity_chibios/halconf.h
+++ b/keyboards/infinity_chibios/halconf.h
@@ -1,353 +1,353 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/halconf.h

- * @brief   HAL configuration header.

- * @details HAL configuration file, this file allows to enable or disable the

- *          various device drivers from your application. You may also use

- *          this file in order to override the device drivers default settings.

- *

- * @addtogroup HAL_CONF

- * @{

- */

-

-#ifndef _HALCONF_H_

-#define _HALCONF_H_

-

-#include "mcuconf.h"

-

-/**

- * @brief   Enables the PAL subsystem.

- */

-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

-#define HAL_USE_PAL                 TRUE

-#endif

-

-/**

- * @brief   Enables the ADC subsystem.

- */

-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

-#define HAL_USE_ADC                 FALSE

-#endif

-

-/**

- * @brief   Enables the CAN subsystem.

- */

-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

-#define HAL_USE_CAN                 FALSE

-#endif

-

-/**

- * @brief   Enables the DAC subsystem.

- */

-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

-#define HAL_USE_DAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the EXT subsystem.

- */

-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

-#define HAL_USE_EXT                 FALSE

-#endif

-

-/**

- * @brief   Enables the GPT subsystem.

- */

-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

-#define HAL_USE_GPT                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2C subsystem.

- */

-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

-#define HAL_USE_I2C                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2S subsystem.

- */

-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

-#define HAL_USE_I2S                 FALSE

-#endif

-

-/**

- * @brief   Enables the ICU subsystem.

- */

-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

-#define HAL_USE_ICU                 FALSE

-#endif

-

-/**

- * @brief   Enables the MAC subsystem.

- */

-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

-#define HAL_USE_MAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the MMC_SPI subsystem.

- */

-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_MMC_SPI             FALSE

-#endif

-

-/**

- * @brief   Enables the PWM subsystem.

- */

-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

-#define HAL_USE_PWM                 FALSE

-#endif

-

-/**

- * @brief   Enables the RTC subsystem.

- */

-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

-#define HAL_USE_RTC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SDC subsystem.

- */

-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

-#define HAL_USE_SDC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL subsystem.

- */

-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL              FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL over USB subsystem.

- */

-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL_USB          TRUE

-#endif

-

-/**

- * @brief   Enables the SPI subsystem.

- */

-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_SPI                 FALSE

-#endif

-

-/**

- * @brief   Enables the UART subsystem.

- */

-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

-#define HAL_USE_UART                FALSE

-#endif

-

-/**

- * @brief   Enables the USB subsystem.

- */

-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

-#define HAL_USE_USB                 TRUE

-#endif

-

-/**

- * @brief   Enables the WDG subsystem.

- */

-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

-#define HAL_USE_WDG                 FALSE

-#endif

-

-/*===========================================================================*/

-/* ADC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)

-#define ADC_USE_WAIT                TRUE

-#endif

-

-/**

- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define ADC_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* CAN driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Sleep mode related APIs inclusion switch.

- */

-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)

-#define CAN_USE_SLEEP_MODE          TRUE

-#endif

-

-/*===========================================================================*/

-/* I2C driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables the mutual exclusion APIs on the I2C bus.

- */

-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define I2C_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* MAC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables an event sources for incoming packets.

- */

-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)

-#define MAC_USE_ZERO_COPY           FALSE

-#endif

-

-/**

- * @brief   Enables an event sources for incoming packets.

- */

-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)

-#define MAC_USE_EVENTS              TRUE

-#endif

-

-/*===========================================================================*/

-/* MMC_SPI driver related settings.                                          */

-/*===========================================================================*/

-

-/**

- * @brief   Delays insertions.

- * @details If enabled this options inserts delays into the MMC waiting

- *          routines releasing some extra CPU time for the threads with

- *          lower priority, this may slow down the driver a bit however.

- *          This option is recommended also if the SPI driver does not

- *          use a DMA channel and heavily loads the CPU.

- */

-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)

-#define MMC_NICE_WAITING            TRUE

-#endif

-

-/*===========================================================================*/

-/* SDC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Number of initialization attempts before rejecting the card.

- * @note    Attempts are performed at 10mS intervals.

- */

-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)

-#define SDC_INIT_RETRY              100

-#endif

-

-/**

- * @brief   Include support for MMC cards.

- * @note    MMC support is not yet implemented so this option must be kept

- *          at @p FALSE.

- */

-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)

-#define SDC_MMC_SUPPORT             FALSE

-#endif

-

-/**

- * @brief   Delays insertions.

- * @details If enabled this options inserts delays into the MMC waiting

- *          routines releasing some extra CPU time for the threads with

- *          lower priority, this may slow down the driver a bit however.

- */

-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)

-#define SDC_NICE_WAITING            TRUE

-#endif

-

-/*===========================================================================*/

-/* SERIAL driver related settings.                                           */

-/*===========================================================================*/

-

-/**

- * @brief   Default bit rate.

- * @details Configuration parameter, this is the baud rate selected for the

- *          default configuration.

- */

-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)

-#define SERIAL_DEFAULT_BITRATE      38400

-#endif

-

-/**

- * @brief   Serial buffers size.

- * @details Configuration parameter, you can change the depth of the queue

- *          buffers depending on the requirements of your application.

- * @note    The default is 64 bytes for both the transmission and receive

- *          buffers.

- */

-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

-#define SERIAL_BUFFERS_SIZE         16

-#endif

-

-/*===========================================================================*/

-/* SERIAL_USB driver related setting.                                        */

-/*===========================================================================*/

-

-/**

- * @brief   Serial over USB buffers size.

- * @details Configuration parameter, the buffer size must be a multiple of

- *          the USB data endpoint maximum packet size.

- * @note    The default is 64 bytes for both the transmission and receive

- *          buffers.

- */

-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)

-#define SERIAL_USB_BUFFERS_SIZE     256

-#endif

-

-/*===========================================================================*/

-/* SPI driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)

-#define SPI_USE_WAIT                TRUE

-#endif

-

-/**

- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define SPI_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* USB driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

-#define USB_USE_WAIT                TRUE

-#endif

-

-#endif /* _HALCONF_H_ */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity_chibios/mcuconf.h
index 66b6ce25d..f453304b7 100644
--- a/keyboards/infinity_chibios/mcuconf.h
+++ b/keyboards/infinity_chibios/mcuconf.h
@@ -1,55 +1,55 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define K20x_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-

-/* Select the MCU clocking mode below by enabling the appropriate block. */

-

-#define KINETIS_NO_INIT             FALSE

-

-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

-#define KINETIS_CLKDIV1_OUTDIV1     1

-#define KINETIS_CLKDIV1_OUTDIV2     1

-#define KINETIS_CLKDIV1_OUTDIV4     2

-#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY

-#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2

-

-/*

- * SERIAL driver system settings.

- */

-#define KINETIS_SERIAL_USE_UART0            TRUE

-

-/*

- * USB driver settings

- */

-#define KINETIS_USB_USE_USB0                TRUE

-/* Need to redefine this, since the default is for K20x */

-/* This is for Teensy LC; you should comment it out (or change to 5)

- * for Teensy 3.x */

-#define KINETIS_USB_USB0_IRQ_PRIORITY       2

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY       2
+
+#endif /* _MCUCONF_H_ */
diff --git a/tmk_core/common/avr/xprintf.S b/tmk_core/common/avr/xprintf.S
index 0cec70ce2..06434b98d 100644
--- a/tmk_core/common/avr/xprintf.S
+++ b/tmk_core/common/avr/xprintf.S
@@ -1,500 +1,500 @@
-;---------------------------------------------------------------------------;

-; Extended itoa, puts, printf and atoi                     (C)ChaN, 2011

-;---------------------------------------------------------------------------;

-

-				// Base size is 152 bytes

-#define	CR_CRLF		0	// Convert \n to \r\n (+10 bytes)

-#define USE_XPRINTF	1	// Enable xprintf function (+194 bytes)

-#define USE_XSPRINTF	0	// Add xsprintf function (+78 bytes)

-#define USE_XFPRINTF	0	// Add xfprintf function (+54 bytes)

-#define USE_XATOI	0	// Enable xatoi function (+182 bytes)

-

-

-#if FLASHEND > 0x1FFFF

-#error xitoa module does not support 256K devices

-#endif

-

-.nolist

-#include <avr/io.h>	// Include device specific definitions.

-.list

-

-#ifdef SPM_PAGESIZE	// Recent devices have "lpm Rd,Z+" and "movw".

-.macro	_LPMI	reg

-	lpm	\reg, Z+

-.endm

-.macro	_MOVW	dh,dl, sh,sl

-	movw	\dl, \sl

-.endm

-#else			// Earlier devices do not have "lpm Rd,Z+" nor "movw".

-.macro	_LPMI	reg

-	lpm

-	mov	\reg, r0

-	adiw	ZL, 1

-.endm

-.macro	_MOVW	dh,dl, sh,sl

-	mov	\dl, \sl

-	mov	\dh, \sh

-.endm

-#endif

-

-

-

-;---------------------------------------------------------------------------

-; Stub function to forward to user output function

-;

-;Prototype: void xputc (char chr	// a character to be output

-;			);

-;Size: 12/12 words

-

-.section .bss

-.global xfunc_out	; xfunc_out must be initialized before using this module.

-xfunc_out:	.ds.w	1

-.section .text

-

-

-.func xputc

-.global xputc

-xputc:

-#if CR_CRLF

-	cpi	r24, 10		;LF --> CRLF

-	brne	1f		;

-	ldi	r24, 13		;

-	rcall	1f		;

-	ldi	r24, 10		;/

-1:

-#endif

-	push	ZH

-	push	ZL

-	lds	ZL, xfunc_out+0	;Pointer to the registered output function.

-	lds	ZH, xfunc_out+1	;/

-	sbiw	ZL, 0		;Skip if null

-	breq	2f		;/

-	icall

-2:	pop	ZL

-	pop	ZH

-	ret

-.endfunc

-

-

-

-;---------------------------------------------------------------------------

-; Direct ROM string output

-;

-;Prototype: void xputs (const char *str_p // rom string to be output

-;			);

-

-.func xputs

-.global xputs

-xputs:

-	_MOVW	ZH,ZL, r25,r24	; Z = pointer to rom string

-1:	_LPMI	r24

-	cpi	r24, 0

-	breq	2f

-	rcall	xputc

-	rjmp	1b

-2:	ret

-.endfunc

-

-

-;---------------------------------------------------------------------------

-; Extended direct numeral string output (32bit version)

-;

-;Prototype: void xitoa (long value,	// value to be output

-;                       char radix,	// radix

-;                       char width);	// minimum width

-;

-

-.func xitoa

-.global xitoa

-xitoa:

-				;r25:r22 = value, r20 = base, r18 = digits

-	clr	r31		;r31 = stack level

-	ldi	r30, ' '	;r30 = sign

-	ldi	r19, ' '	;r19 = filler

-	sbrs	r20, 7		;When base indicates signd format and the value

-	rjmp	0f		;is minus, add a '-'.

-	neg	r20		;

-	sbrs	r25, 7		;

-	rjmp	0f		;

-	ldi	r30, '-'	;

-	com	r22		;

-	com	r23		;

-	com	r24		;

-	com	r25		;

-	adc	r22, r1		;

-	adc	r23, r1		;

-	adc	r24, r1		;

-	adc	r25, r1		;/

-0:	sbrs	r18, 7		;When digits indicates zero filled,

-	rjmp	1f		;filler is '0'.

-	neg	r18		;

-	ldi	r19, '0'	;/

-				;----- string conversion loop

-1:	ldi	r21, 32		;r26 = r25:r22 % r20

-	clr	r26		;r25:r22 /= r20

-2:	lsl	r22		;

-	rol	r23		;

-	rol	r24		;

-	rol	r25		;

-	rol	r26		;

-	cp	r26, r20	;

-	brcs	3f		;

-	sub	r26, r20	;

-	inc	r22		;

-3:	dec	r21		;

-	brne	2b		;/

-	cpi	r26, 10		;r26 is a numeral digit '0'-'F'

-	brcs	4f		;

-	subi	r26, -7		;

-4:	subi	r26, -'0'	;/

-	push	r26		;Stack it

-	inc	r31		;/

-	cp	r22, r1		;Repeat until r25:r22 gets zero

-	cpc	r23, r1		;

-	cpc	r24, r1		;

-	cpc	r25, r1		;

-	brne	1b		;/

-

-	cpi	r30, '-'	;Minus sign if needed

-	brne	5f		;

-	push	r30		;

-	inc	r31		;/

-5:	cp	r31, r18	;Filler

-	brcc	6f		;

-	push	r19		;

-	inc	r31		;

-	rjmp	5b		;/

-

-6:	pop	r24		;Flush stacked digits and exit

-	rcall	xputc		;

-	dec	r31		;

-	brne	6b		;/

-

-	ret

-.endfunc

-

-

-

-;---------------------------------------------------------------------------;

-; Formatted string output (16/32bit version)

-;

-;Prototype:

-; void __xprintf (const char *format_p, ...);

-; void __xsprintf(char*, const char *format_p, ...);

-; void __xfprintf(void(*func)(char), const char *format_p, ...);

-;

-

-#if USE_XPRINTF

-

-.func xvprintf

-xvprintf:

-	ld	ZL, Y+		;Z = pointer to format string

-	ld	ZH, Y+		;/

-

-0:	_LPMI	r24		;Get a format char

-	cpi	r24, 0		;End of format string?

-	breq	90f		;/

-	cpi	r24, '%'	;Is format?

-	breq	20f		;/

-1:	rcall	xputc		;Put a normal character

-	rjmp	0b		;/

-90:	ret

-

-20:	ldi	r18, 0		;r18: digits

-	clt			;T: filler

-	_LPMI	r21		;Get flags

-	cpi	r21, '%'	;Is a %?

-	breq	1b		;/

-	cpi	r21, '0'	;Zero filled?

-	brne	23f		;

-	set			;/

-22:	_LPMI	r21		;Get width

-23:	cpi	r21, '9'+1	;

-	brcc	24f		;

-	subi	r21, '0'	;

-	brcs	90b		;

-	lsl	r18		;

-	mov	r0, r18		;

-	lsl	r18		;

-	lsl	r18		;

-	add	r18, r0		;

-	add	r18, r21	;

-	rjmp	22b		;/

-

-24:	brtc	25f		;get value (low word)

-	neg	r18		;

-25:	ld	r24, Y+		;

-	ld	r25, Y+		;/

-	cpi	r21, 'c'	;Is type character?

-	breq	1b		;/

-	cpi	r21, 's'	;Is type RAM string?

-	breq	50f		;/

-	cpi	r21, 'S'	;Is type ROM string?

-	breq	60f		;/

-	_MOVW	r23,r22,r25,r24	;r25:r22 = value

-	clr	r24		;

-	clr	r25		;

-	clt			;/

-	cpi	r21, 'l'	;Is long int?

-	brne	26f		;

-	ld	r24, Y+		;get value (high word)

-	ld	r25, Y+		;

-	set			;

-	_LPMI	r21		;/

-26:	cpi	r21, 'd'	;Is type signed decimal?

-	brne	27f		;/

-	ldi	r20, -10	;

-	brts	40f		;

-	sbrs	r23, 7		;

-	rjmp	40f		;

-	ldi	r24, -1		;

-	ldi	r25, -1		;

-	rjmp	40f		;/

-27:	cpi	r21, 'u'	;Is type unsigned decimal?

-	ldi	r20, 10		;

-	breq	40f		;/

-	cpi	r21, 'X'	;Is type hexdecimal?

-	ldi	r20, 16		;

-	breq	40f		;/

-	cpi	r21, 'b'	;Is type binary?

-	ldi	r20, 2		;

-	breq	40f		;/

-	ret			;abort

-40:	push	ZH		;Output the value

-	push	ZL		;

-	rcall	xitoa		;

-42:	pop	ZL		;

-	pop	ZH		;

-	rjmp	0b		;/

-

-50:	push	ZH		;Put a string on the RAM

-	push	ZL

-	_MOVW	ZH,ZL, r25,r24

-51:	ld	r24, Z+

-	cpi	r24, 0

-	breq	42b

-	rcall	xputc

-	rjmp	51b

-

-60:	push	ZH		;Put a string on the ROM

-	push	ZL

-	rcall	xputs

-	rjmp	42b

-.endfunc

-

-

-.func __xprintf

-.global __xprintf

-__xprintf:

-	push	YH

-	push	YL

-	in	YL, _SFR_IO_ADDR(SPL)

-#ifdef SPH

-	in	YH, _SFR_IO_ADDR(SPH)

-#else

-	clr	YH

-#endif

-	adiw	YL, 5		;Y = pointer to arguments

-	rcall	xvprintf

-	pop	YL

-	pop	YH

-	ret

-.endfunc

-

-

-#if USE_XSPRINTF

-

-.func __xsprintf

-putram:

-	_MOVW	ZH,ZL, r15,r14

-	st	Z+, r24

-	_MOVW	r15,r14, ZH,ZL

-	ret

-.global __xsprintf

-__xsprintf:

-	push	YH

-	push	YL

-	in	YL, _SFR_IO_ADDR(SPL)

-#ifdef SPH

-	in	YH, _SFR_IO_ADDR(SPH)

-#else

-	clr	YH

-#endif

-	adiw	YL, 5		;Y = pointer to arguments

-	lds	ZL, xfunc_out+0	;Save registered output function

-	lds	ZH, xfunc_out+1	;

-	push	ZL		;

-	push	ZH		;/

-	ldi	ZL, lo8(pm(putram));Set local output function

-	ldi	ZH, hi8(pm(putram));

-	sts	xfunc_out+0, ZL	;

-	sts	xfunc_out+1, ZH	;/

-	push	r15		;Initialize pointer to string buffer

-	push	r14		;

-	ld	r14, Y+		;

-	ld	r15, Y+		;/

-	rcall	xvprintf

-	_MOVW	ZH,ZL, r15,r14	;Terminate string

-	st	Z, r1		;

-	pop	r14		;

-	pop	r15		;/

-	pop	ZH		;Restore registered output function

-	pop	ZL		;

-	sts	xfunc_out+0, ZL	;

-	sts	xfunc_out+1, ZH	;/

-	pop	YL

-	pop	YH

-	ret

-.endfunc

-#endif

-

-

-#if USE_XFPRINTF

-.func __xfprintf

-.global __xfprintf

-__xfprintf:

-	push	YH

-	push	YL

-	in	YL, _SFR_IO_ADDR(SPL)

-#ifdef SPH

-	in	YH, _SFR_IO_ADDR(SPH)

-#else

-	clr	YH

-#endif

-	adiw	YL, 5		;Y = pointer to arguments

-	lds	ZL, xfunc_out+0	;Save registered output function

-	lds	ZH, xfunc_out+1	;

-	push	ZL		;

-	push	ZH		;/

-	ld	ZL, Y+		;Set output function

-	ld	ZH, Y+		;

-	sts	xfunc_out+0, ZL	;

-	sts	xfunc_out+1, ZH	;/

-	rcall	xvprintf

-	pop	ZH		;Restore registered output function

-	pop	ZL		;

-	sts	xfunc_out+0, ZL	;

-	sts	xfunc_out+1, ZH	;/

-	pop	YL

-	pop	YH

-	ret

-.endfunc

-#endif

-

-#endif

-

-

-

-;---------------------------------------------------------------------------

-; Extended numeral string input

-;

-;Prototype:

-; char xatoi (           /* 1: Successful, 0: Failed */

-;      const char **str, /* pointer to pointer to source string */

-;      long *res         /* result */

-; );

-;

-

-

-#if USE_XATOI

-.func xatoi

-.global xatoi

-xatoi:

-	_MOVW	r1, r0, r23, r22

-	_MOVW	XH, XL, r25, r24

-	ld	ZL, X+

-	ld	ZH, X+

-	clr	r18		;r21:r18 = 0;

-	clr	r19		;

-	clr	r20		;

-	clr	r21		;/

-	clt			;T = 0;

-

-	ldi	r25, 10		;r25 = 10;

-	rjmp	41f		;/

-40:	adiw	ZL, 1		;Z++;

-41:	ld	r22, Z		;r22 = *Z;

-	cpi	r22, ' '	;if(r22 == ' ') continue

-	breq	40b		;/

-	brcs	70f		;if(r22 < ' ') error;

-	cpi	r22, '-'	;if(r22 == '-') {

-	brne	42f		; T = 1;

-	set			; continue;

-	rjmp	40b		;}

-42:	cpi	r22, '9'+1	;if(r22 > '9') error;

-	brcc	70f		;/

-	cpi	r22, '0'	;if(r22 < '0') error;

-	brcs	70f		;/

-	brne	51f		;if(r22 > '0') cv_start;

-	ldi	r25, 8		;r25 = 8;

-	adiw	ZL, 1		;r22 = *(++Z);

-	ld	r22, Z		;/

-	cpi	r22, ' '+1	;if(r22 <= ' ') exit;

-	brcs	80f		;/

-	cpi	r22, 'b'	;if(r22 == 'b') {

-	brne	43f		; r25 = 2;

-	ldi	r25, 2		; cv_start;

-	rjmp	50f		;}

-43:	cpi	r22, 'x'	;if(r22 != 'x') error;

-	brne	51f		;/

-	ldi	r25, 16		;r25 = 16;

-

-50:	adiw	ZL, 1		;Z++;

-	ld	r22, Z		;r22 = *Z;

-51:	cpi	r22, ' '+1	;if(r22 <= ' ') break;

-	brcs	80f		;/

-	cpi	r22, 'a'	;if(r22 >= 'a') r22 =- 0x20;

-	brcs	52f		;

-	subi	r22, 0x20	;/

-52:	subi	r22, '0'	;if((r22 -= '0') < 0) error;

-	brcs	70f		;/

-	cpi	r22, 10		;if(r22 >= 10) {

-	brcs	53f		; r22 -= 7;

-	subi	r22, 7		; if(r22 < 10) 

-	cpi	r22, 10		;

-	brcs	70f		;}

-53:	cp	r22, r25	;if(r22 >= r25) error;

-	brcc	70f		;/

-60:	ldi	r24, 33		;r21:r18 *= r25;

-	sub	r23, r23	;

-61:	brcc	62f		;

-	add	r23, r25	;

-62:	lsr	r23		;

-	ror	r21		;

-	ror	r20		;

-	ror	r19		;

-	ror	r18		;

-	dec	r24		;

-	brne	61b		;/

-	add	r18, r22	;r21:r18 += r22;

-	adc	r19, r24	;

-	adc	r20, r24	;

-	adc	r21, r24	;/

-	rjmp	50b		;repeat

-

-70:	ldi	r24, 0

-	rjmp	81f

-80:	ldi	r24, 1

-81:	brtc	82f

-	clr	r22

-	com	r18

-	com	r19

-	com	r20

-	com	r21

-	adc	r18, r22

-	adc	r19, r22

-	adc	r20, r22

-	adc	r21, r22

-82:	st	-X, ZH

-	st	-X, ZL

-	_MOVW	XH, XL, r1, r0

-	st	X+, r18

-	st	X+, r19

-	st	X+, r20

-	st	X+, r21

-	clr	r1

-	ret

-.endfunc

-#endif

-

-

+;---------------------------------------------------------------------------;
+; Extended itoa, puts, printf and atoi                     (C)ChaN, 2011
+;---------------------------------------------------------------------------;
+
+				// Base size is 152 bytes
+#define	CR_CRLF		0	// Convert \n to \r\n (+10 bytes)
+#define USE_XPRINTF	1	// Enable xprintf function (+194 bytes)
+#define USE_XSPRINTF	0	// Add xsprintf function (+78 bytes)
+#define USE_XFPRINTF	0	// Add xfprintf function (+54 bytes)
+#define USE_XATOI	0	// Enable xatoi function (+182 bytes)
+
+
+#if FLASHEND > 0x1FFFF
+#error xitoa module does not support 256K devices
+#endif
+
+.nolist
+#include <avr/io.h>	// Include device specific definitions.
+.list
+
+#ifdef SPM_PAGESIZE	// Recent devices have "lpm Rd,Z+" and "movw".
+.macro	_LPMI	reg
+	lpm	\reg, Z+
+.endm
+.macro	_MOVW	dh,dl, sh,sl
+	movw	\dl, \sl
+.endm
+#else			// Earlier devices do not have "lpm Rd,Z+" nor "movw".
+.macro	_LPMI	reg
+	lpm
+	mov	\reg, r0
+	adiw	ZL, 1
+.endm
+.macro	_MOVW	dh,dl, sh,sl
+	mov	\dl, \sl
+	mov	\dh, \sh
+.endm
+#endif
+
+
+
+;---------------------------------------------------------------------------
+; Stub function to forward to user output function
+;
+;Prototype: void xputc (char chr	// a character to be output
+;			);
+;Size: 12/12 words
+
+.section .bss
+.global xfunc_out	; xfunc_out must be initialized before using this module.
+xfunc_out:	.ds.w	1
+.section .text
+
+
+.func xputc
+.global xputc
+xputc:
+#if CR_CRLF
+	cpi	r24, 10		;LF --> CRLF
+	brne	1f		;
+	ldi	r24, 13		;
+	rcall	1f		;
+	ldi	r24, 10		;/
+1:
+#endif
+	push	ZH
+	push	ZL
+	lds	ZL, xfunc_out+0	;Pointer to the registered output function.
+	lds	ZH, xfunc_out+1	;/
+	sbiw	ZL, 0		;Skip if null
+	breq	2f		;/
+	icall
+2:	pop	ZL
+	pop	ZH
+	ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------
+; Direct ROM string output
+;
+;Prototype: void xputs (const char *str_p // rom string to be output
+;			);
+
+.func xputs
+.global xputs
+xputs:
+	_MOVW	ZH,ZL, r25,r24	; Z = pointer to rom string
+1:	_LPMI	r24
+	cpi	r24, 0
+	breq	2f
+	rcall	xputc
+	rjmp	1b
+2:	ret
+.endfunc
+
+
+;---------------------------------------------------------------------------
+; Extended direct numeral string output (32bit version)
+;
+;Prototype: void xitoa (long value,	// value to be output
+;                       char radix,	// radix
+;                       char width);	// minimum width
+;
+
+.func xitoa
+.global xitoa
+xitoa:
+				;r25:r22 = value, r20 = base, r18 = digits
+	clr	r31		;r31 = stack level
+	ldi	r30, ' '	;r30 = sign
+	ldi	r19, ' '	;r19 = filler
+	sbrs	r20, 7		;When base indicates signd format and the value
+	rjmp	0f		;is minus, add a '-'.
+	neg	r20		;
+	sbrs	r25, 7		;
+	rjmp	0f		;
+	ldi	r30, '-'	;
+	com	r22		;
+	com	r23		;
+	com	r24		;
+	com	r25		;
+	adc	r22, r1		;
+	adc	r23, r1		;
+	adc	r24, r1		;
+	adc	r25, r1		;/
+0:	sbrs	r18, 7		;When digits indicates zero filled,
+	rjmp	1f		;filler is '0'.
+	neg	r18		;
+	ldi	r19, '0'	;/
+				;----- string conversion loop
+1:	ldi	r21, 32		;r26 = r25:r22 % r20
+	clr	r26		;r25:r22 /= r20
+2:	lsl	r22		;
+	rol	r23		;
+	rol	r24		;
+	rol	r25		;
+	rol	r26		;
+	cp	r26, r20	;
+	brcs	3f		;
+	sub	r26, r20	;
+	inc	r22		;
+3:	dec	r21		;
+	brne	2b		;/
+	cpi	r26, 10		;r26 is a numeral digit '0'-'F'
+	brcs	4f		;
+	subi	r26, -7		;
+4:	subi	r26, -'0'	;/
+	push	r26		;Stack it
+	inc	r31		;/
+	cp	r22, r1		;Repeat until r25:r22 gets zero
+	cpc	r23, r1		;
+	cpc	r24, r1		;
+	cpc	r25, r1		;
+	brne	1b		;/
+
+	cpi	r30, '-'	;Minus sign if needed
+	brne	5f		;
+	push	r30		;
+	inc	r31		;/
+5:	cp	r31, r18	;Filler
+	brcc	6f		;
+	push	r19		;
+	inc	r31		;
+	rjmp	5b		;/
+
+6:	pop	r24		;Flush stacked digits and exit
+	rcall	xputc		;
+	dec	r31		;
+	brne	6b		;/
+
+	ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------;
+; Formatted string output (16/32bit version)
+;
+;Prototype:
+; void __xprintf (const char *format_p, ...);
+; void __xsprintf(char*, const char *format_p, ...);
+; void __xfprintf(void(*func)(char), const char *format_p, ...);
+;
+
+#if USE_XPRINTF
+
+.func xvprintf
+xvprintf:
+	ld	ZL, Y+		;Z = pointer to format string
+	ld	ZH, Y+		;/
+
+0:	_LPMI	r24		;Get a format char
+	cpi	r24, 0		;End of format string?
+	breq	90f		;/
+	cpi	r24, '%'	;Is format?
+	breq	20f		;/
+1:	rcall	xputc		;Put a normal character
+	rjmp	0b		;/
+90:	ret
+
+20:	ldi	r18, 0		;r18: digits
+	clt			;T: filler
+	_LPMI	r21		;Get flags
+	cpi	r21, '%'	;Is a %?
+	breq	1b		;/
+	cpi	r21, '0'	;Zero filled?
+	brne	23f		;
+	set			;/
+22:	_LPMI	r21		;Get width
+23:	cpi	r21, '9'+1	;
+	brcc	24f		;
+	subi	r21, '0'	;
+	brcs	90b		;
+	lsl	r18		;
+	mov	r0, r18		;
+	lsl	r18		;
+	lsl	r18		;
+	add	r18, r0		;
+	add	r18, r21	;
+	rjmp	22b		;/
+
+24:	brtc	25f		;get value (low word)
+	neg	r18		;
+25:	ld	r24, Y+		;
+	ld	r25, Y+		;/
+	cpi	r21, 'c'	;Is type character?
+	breq	1b		;/
+	cpi	r21, 's'	;Is type RAM string?
+	breq	50f		;/
+	cpi	r21, 'S'	;Is type ROM string?
+	breq	60f		;/
+	_MOVW	r23,r22,r25,r24	;r25:r22 = value
+	clr	r24		;
+	clr	r25		;
+	clt			;/
+	cpi	r21, 'l'	;Is long int?
+	brne	26f		;
+	ld	r24, Y+		;get value (high word)
+	ld	r25, Y+		;
+	set			;
+	_LPMI	r21		;/
+26:	cpi	r21, 'd'	;Is type signed decimal?
+	brne	27f		;/
+	ldi	r20, -10	;
+	brts	40f		;
+	sbrs	r23, 7		;
+	rjmp	40f		;
+	ldi	r24, -1		;
+	ldi	r25, -1		;
+	rjmp	40f		;/
+27:	cpi	r21, 'u'	;Is type unsigned decimal?
+	ldi	r20, 10		;
+	breq	40f		;/
+	cpi	r21, 'X'	;Is type hexdecimal?
+	ldi	r20, 16		;
+	breq	40f		;/
+	cpi	r21, 'b'	;Is type binary?
+	ldi	r20, 2		;
+	breq	40f		;/
+	ret			;abort
+40:	push	ZH		;Output the value
+	push	ZL		;
+	rcall	xitoa		;
+42:	pop	ZL		;
+	pop	ZH		;
+	rjmp	0b		;/
+
+50:	push	ZH		;Put a string on the RAM
+	push	ZL
+	_MOVW	ZH,ZL, r25,r24
+51:	ld	r24, Z+
+	cpi	r24, 0
+	breq	42b
+	rcall	xputc
+	rjmp	51b
+
+60:	push	ZH		;Put a string on the ROM
+	push	ZL
+	rcall	xputs
+	rjmp	42b
+.endfunc
+
+
+.func __xprintf
+.global __xprintf
+__xprintf:
+	push	YH
+	push	YL
+	in	YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+	in	YH, _SFR_IO_ADDR(SPH)
+#else
+	clr	YH
+#endif
+	adiw	YL, 5		;Y = pointer to arguments
+	rcall	xvprintf
+	pop	YL
+	pop	YH
+	ret
+.endfunc
+
+
+#if USE_XSPRINTF
+
+.func __xsprintf
+putram:
+	_MOVW	ZH,ZL, r15,r14
+	st	Z+, r24
+	_MOVW	r15,r14, ZH,ZL
+	ret
+.global __xsprintf
+__xsprintf:
+	push	YH
+	push	YL
+	in	YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+	in	YH, _SFR_IO_ADDR(SPH)
+#else
+	clr	YH
+#endif
+	adiw	YL, 5		;Y = pointer to arguments
+	lds	ZL, xfunc_out+0	;Save registered output function
+	lds	ZH, xfunc_out+1	;
+	push	ZL		;
+	push	ZH		;/
+	ldi	ZL, lo8(pm(putram));Set local output function
+	ldi	ZH, hi8(pm(putram));
+	sts	xfunc_out+0, ZL	;
+	sts	xfunc_out+1, ZH	;/
+	push	r15		;Initialize pointer to string buffer
+	push	r14		;
+	ld	r14, Y+		;
+	ld	r15, Y+		;/
+	rcall	xvprintf
+	_MOVW	ZH,ZL, r15,r14	;Terminate string
+	st	Z, r1		;
+	pop	r14		;
+	pop	r15		;/
+	pop	ZH		;Restore registered output function
+	pop	ZL		;
+	sts	xfunc_out+0, ZL	;
+	sts	xfunc_out+1, ZH	;/
+	pop	YL
+	pop	YH
+	ret
+.endfunc
+#endif
+
+
+#if USE_XFPRINTF
+.func __xfprintf
+.global __xfprintf
+__xfprintf:
+	push	YH
+	push	YL
+	in	YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+	in	YH, _SFR_IO_ADDR(SPH)
+#else
+	clr	YH
+#endif
+	adiw	YL, 5		;Y = pointer to arguments
+	lds	ZL, xfunc_out+0	;Save registered output function
+	lds	ZH, xfunc_out+1	;
+	push	ZL		;
+	push	ZH		;/
+	ld	ZL, Y+		;Set output function
+	ld	ZH, Y+		;
+	sts	xfunc_out+0, ZL	;
+	sts	xfunc_out+1, ZH	;/
+	rcall	xvprintf
+	pop	ZH		;Restore registered output function
+	pop	ZL		;
+	sts	xfunc_out+0, ZL	;
+	sts	xfunc_out+1, ZH	;/
+	pop	YL
+	pop	YH
+	ret
+.endfunc
+#endif
+
+#endif
+
+
+
+;---------------------------------------------------------------------------
+; Extended numeral string input
+;
+;Prototype:
+; char xatoi (           /* 1: Successful, 0: Failed */
+;      const char **str, /* pointer to pointer to source string */
+;      long *res         /* result */
+; );
+;
+
+
+#if USE_XATOI
+.func xatoi
+.global xatoi
+xatoi:
+	_MOVW	r1, r0, r23, r22
+	_MOVW	XH, XL, r25, r24
+	ld	ZL, X+
+	ld	ZH, X+
+	clr	r18		;r21:r18 = 0;
+	clr	r19		;
+	clr	r20		;
+	clr	r21		;/
+	clt			;T = 0;
+
+	ldi	r25, 10		;r25 = 10;
+	rjmp	41f		;/
+40:	adiw	ZL, 1		;Z++;
+41:	ld	r22, Z		;r22 = *Z;
+	cpi	r22, ' '	;if(r22 == ' ') continue
+	breq	40b		;/
+	brcs	70f		;if(r22 < ' ') error;
+	cpi	r22, '-'	;if(r22 == '-') {
+	brne	42f		; T = 1;
+	set			; continue;
+	rjmp	40b		;}
+42:	cpi	r22, '9'+1	;if(r22 > '9') error;
+	brcc	70f		;/
+	cpi	r22, '0'	;if(r22 < '0') error;
+	brcs	70f		;/
+	brne	51f		;if(r22 > '0') cv_start;
+	ldi	r25, 8		;r25 = 8;
+	adiw	ZL, 1		;r22 = *(++Z);
+	ld	r22, Z		;/
+	cpi	r22, ' '+1	;if(r22 <= ' ') exit;
+	brcs	80f		;/
+	cpi	r22, 'b'	;if(r22 == 'b') {
+	brne	43f		; r25 = 2;
+	ldi	r25, 2		; cv_start;
+	rjmp	50f		;}
+43:	cpi	r22, 'x'	;if(r22 != 'x') error;
+	brne	51f		;/
+	ldi	r25, 16		;r25 = 16;
+
+50:	adiw	ZL, 1		;Z++;
+	ld	r22, Z		;r22 = *Z;
+51:	cpi	r22, ' '+1	;if(r22 <= ' ') break;
+	brcs	80f		;/
+	cpi	r22, 'a'	;if(r22 >= 'a') r22 =- 0x20;
+	brcs	52f		;
+	subi	r22, 0x20	;/
+52:	subi	r22, '0'	;if((r22 -= '0') < 0) error;
+	brcs	70f		;/
+	cpi	r22, 10		;if(r22 >= 10) {
+	brcs	53f		; r22 -= 7;
+	subi	r22, 7		; if(r22 < 10) 
+	cpi	r22, 10		;
+	brcs	70f		;}
+53:	cp	r22, r25	;if(r22 >= r25) error;
+	brcc	70f		;/
+60:	ldi	r24, 33		;r21:r18 *= r25;
+	sub	r23, r23	;
+61:	brcc	62f		;
+	add	r23, r25	;
+62:	lsr	r23		;
+	ror	r21		;
+	ror	r20		;
+	ror	r19		;
+	ror	r18		;
+	dec	r24		;
+	brne	61b		;/
+	add	r18, r22	;r21:r18 += r22;
+	adc	r19, r24	;
+	adc	r20, r24	;
+	adc	r21, r24	;/
+	rjmp	50b		;repeat
+
+70:	ldi	r24, 0
+	rjmp	81f
+80:	ldi	r24, 1
+81:	brtc	82f
+	clr	r22
+	com	r18
+	com	r19
+	com	r20
+	com	r21
+	adc	r18, r22
+	adc	r19, r22
+	adc	r20, r22
+	adc	r21, r22
+82:	st	-X, ZH
+	st	-X, ZL
+	_MOVW	XH, XL, r1, r0
+	st	X+, r18
+	st	X+, r19
+	st	X+, r20
+	st	X+, r21
+	clr	r1
+	ret
+.endfunc
+#endif
+
+
diff --git a/tmk_core/common/avr/xprintf.h b/tmk_core/common/avr/xprintf.h
index 59c6f2531..e53c0dd8e 100644
--- a/tmk_core/common/avr/xprintf.h
+++ b/tmk_core/common/avr/xprintf.h
@@ -1,111 +1,111 @@
-/*---------------------------------------------------------------------------

-   Extended itoa, puts and printf                    (C)ChaN, 2011

------------------------------------------------------------------------------*/

-

-#ifndef XPRINTF_H

-#define XPRINTF_H

-

-#include <inttypes.h>

-#include <avr/pgmspace.h>

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-extern void (*xfunc_out)(uint8_t);

-#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)

-

-/* This is a pointer to user defined output function. It must be initialized

-   before using this modle.

-*/

-

-void xputc(char chr);

-

-/* This is a stub function to forward outputs to user defined output function.

-   All outputs from this module are output via this function.

-*/

-

-

-/*-----------------------------------------------------------------------------*/

-void xputs(const char *string_p);

-

-/*  The string placed in the ROM is forwarded to xputc() directly.

-*/

-

-

-/*-----------------------------------------------------------------------------*/

-void xitoa(long value, char radix, char width);

-

-/* Extended itoa().

-

-      value  radix  width   output

-        100     10      6   "   100"

-        100     10     -6   "000100"

-        100     10      0   "100"

- 4294967295     10      0   "4294967295"

- 4294967295    -10      0   "-1"

-     655360     16     -8   "000A0000"

-       1024     16      0   "400"

-       0x55      2     -8   "01010101"

-*/

-

-

-/*-----------------------------------------------------------------------------*/

-#define xprintf(format, ...)            __xprintf(PSTR(format), ##__VA_ARGS__)

-#define xsprintf(str, format, ...)      __xsprintf(str, PSTR(format), ##__VA_ARGS__)

-#define xfprintf(func, format, ...)     __xfprintf(func, PSTR(format), ##__VA_ARGS__)

-

-void __xprintf(const char *format_p, ...);	/* Send formatted string to the registered device */

-void __xsprintf(char*, const char *format_p, ...);	/* Put formatted string to the memory */

-void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */

-

-/* Format string is placed in the ROM. The format flags is similar to printf().

-

-   %[flag][width][size]type

-

-   flag

-     A '0' means filled with '0' when output is shorter than width.

-     ' ' is used in default. This is effective only numeral type.

-   width

-     Minimum width in decimal number. This is effective only numeral type.

-     Default width is zero.

-   size

-     A 'l' means the argument is long(32bit). Default is short(16bit).

-     This is effective only numeral type.

-   type

-     'c' : Character, argument is the value

-     's' : String placed on the RAM, argument is the pointer

-     'S' : String placed on the ROM, argument is the pointer

-     'd' : Signed decimal, argument is the value

-     'u' : Unsigned decimal, argument is the value

-     'X' : Hexdecimal, argument is the value

-     'b' : Binary, argument is the value

-     '%' : '%'

-

-*/

-

-

-/*-----------------------------------------------------------------------------*/

-char xatoi(char **str, long *ret);

-

-/* Get value of the numeral string. 

-

-  str

-    Pointer to pointer to source string

-

-    "0b11001010" binary

-    "0377" octal

-    "0xff800" hexdecimal

-    "1250000" decimal

-    "-25000" decimal

-

-  ret

-    Pointer to return value

-*/

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif

-

+/*---------------------------------------------------------------------------
+   Extended itoa, puts and printf                    (C)ChaN, 2011
+-----------------------------------------------------------------------------*/
+
+#ifndef XPRINTF_H
+#define XPRINTF_H
+
+#include <inttypes.h>
+#include <avr/pgmspace.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void (*xfunc_out)(uint8_t);
+#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)
+
+/* This is a pointer to user defined output function. It must be initialized
+   before using this modle.
+*/
+
+void xputc(char chr);
+
+/* This is a stub function to forward outputs to user defined output function.
+   All outputs from this module are output via this function.
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+void xputs(const char *string_p);
+
+/*  The string placed in the ROM is forwarded to xputc() directly.
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+void xitoa(long value, char radix, char width);
+
+/* Extended itoa().
+
+      value  radix  width   output
+        100     10      6   "   100"
+        100     10     -6   "000100"
+        100     10      0   "100"
+ 4294967295     10      0   "4294967295"
+ 4294967295    -10      0   "-1"
+     655360     16     -8   "000A0000"
+       1024     16      0   "400"
+       0x55      2     -8   "01010101"
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+#define xprintf(format, ...)            __xprintf(PSTR(format), ##__VA_ARGS__)
+#define xsprintf(str, format, ...)      __xsprintf(str, PSTR(format), ##__VA_ARGS__)
+#define xfprintf(func, format, ...)     __xfprintf(func, PSTR(format), ##__VA_ARGS__)
+
+void __xprintf(const char *format_p, ...);	/* Send formatted string to the registered device */
+void __xsprintf(char*, const char *format_p, ...);	/* Put formatted string to the memory */
+void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
+
+/* Format string is placed in the ROM. The format flags is similar to printf().
+
+   %[flag][width][size]type
+
+   flag
+     A '0' means filled with '0' when output is shorter than width.
+     ' ' is used in default. This is effective only numeral type.
+   width
+     Minimum width in decimal number. This is effective only numeral type.
+     Default width is zero.
+   size
+     A 'l' means the argument is long(32bit). Default is short(16bit).
+     This is effective only numeral type.
+   type
+     'c' : Character, argument is the value
+     's' : String placed on the RAM, argument is the pointer
+     'S' : String placed on the ROM, argument is the pointer
+     'd' : Signed decimal, argument is the value
+     'u' : Unsigned decimal, argument is the value
+     'X' : Hexdecimal, argument is the value
+     'b' : Binary, argument is the value
+     '%' : '%'
+
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+char xatoi(char **str, long *ret);
+
+/* Get value of the numeral string. 
+
+  str
+    Pointer to pointer to source string
+
+    "0b11001010" binary
+    "0377" octal
+    "0xff800" hexdecimal
+    "1250000" decimal
+    "-25000" decimal
+
+  ret
+    Pointer to return value
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/tmk_core/protocol/iwrap/suart.S b/tmk_core/protocol/iwrap/suart.S
index 1b0290963..a873515e1 100644
--- a/tmk_core/protocol/iwrap/suart.S
+++ b/tmk_core/protocol/iwrap/suart.S
@@ -1,156 +1,156 @@
-;---------------------------------------------------------------------------;

-; Software implemented UART module                                          ;

-; (C)ChaN, 2005 (http://elm-chan.org/)                                      ;

-;---------------------------------------------------------------------------;

-; Bit rate settings:

-;

-;            1MHz  2MHz  4MHz  6MHz  8MHz  10MHz  12MHz  16MHz  20MHz

-;   2.4kbps   138     -     -     -     -      -      -      -      -

-;   4.8kbps    68   138     -     -     -      -      -      -      -

-;   9.6kbps    33    68   138   208     -      -      -      -      -

-;  19.2kbps     -    33    68   102   138    173    208      -      -

-;  38.4kbps     -     -    33    50    68     85    102    138    172

-;  57.6kbps     -     -    21    33    44     56     68     91    114

-; 115.2kbps     -     -     -     -    21     27     33     44     56

-

-.nolist

-#include <avr/io.h>

-.list

-

-#define	BPS	102 	/* Bit delay. (see above table) */

-#define	BIDIR	0	/* 0:Separated Tx/Rx, 1:Shared Tx/Rx */

-

-#define	OUT_1		sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 1 */

-#define	OUT_0		cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 0 */

-#define	SKIP_IN_1	sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 1 */

-#define	SKIP_IN_0	sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 0 */

-

-

-

-#ifdef SPM_PAGESIZE

-.macro	_LPMI	reg

-	lpm	\reg, Z+

-.endm

-.macro	_MOVW	dh,dl, sh,sl

-	movw	\dl, \sl

-.endm

-#else

-.macro	_LPMI	reg

-	lpm

-	mov	\reg, r0

-	adiw	ZL, 1

-.endm

-.macro	_MOVW	dh,dl, sh,sl

-	mov	\dl, \sl

-	mov	\dh, \sh

-.endm

-#endif

-

-

-

-;---------------------------------------------------------------------------;

-; Transmit a byte in serial format of N81

-;

-;Prototype: void xmit (uint8_t data);

-;Size: 16 words

-

-.global xmit

-.func xmit

-xmit:

-#if BIDIR

-	ldi	r23, BPS-1	;Pre-idle time for bidirectional data line

-5:	dec	r23     	;

-	brne	5b		;/

-#endif

-	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

-

-	com	r24		;C = start bit

-	ldi	r25, 10		;Bit counter

-	cli			;Start critical section

-

-1:	ldi	r23, BPS-1	;----- Bit transferring loop 

-2:	dec	r23     	;Wait for a bit time

-	brne	2b		;/

-	brcs	3f		;MISO = bit to be sent

-	OUT_1			;

-3:	brcc	4f		;

-	OUT_0			;/

-4:	lsr	r24     	;Get next bit into C

-	dec	r25     	;All bits sent?

-	brne	1b	     	;  no, coutinue

-

-	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

-	ret

-.endfunc

-

-

-

-;---------------------------------------------------------------------------;

-; Receive a byte

-;

-;Prototype: uint8_t rcvr (void);

-;Size: 19 words

-

-.global rcvr

-.func rcvr

-rcvr:

-	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

-

-	ldi	r24, 0x80	;Receiving shift reg

-	cli			;Start critical section

-

-1:	SKIP_IN_1		;Wait for idle

-	rjmp	1b

-2:	SKIP_IN_0		;Wait for start bit

-	rjmp	2b

-	ldi	r25, BPS/2	;Wait for half bit time

-3:	dec	r25

-	brne	3b

-

-4:	ldi	r25, BPS	;----- Bit receiving loop

-5:	dec	r25     	;Wait for a bit time

-	brne	5b		;/

-	lsr	r24     	;Next bit

-	SKIP_IN_0		;Get a data bit into r24.7

-	ori	r24, 0x80

-	brcc	4b	     	;All bits received?  no, continue

-

-	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

-	ret

-.endfunc

-

-

-; Not wait for start bit. This should be called after detecting start bit.

-.global recv

-.func recv

-recv:

-	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

-

-	ldi	r24, 0x80	;Receiving shift reg

-	cli			;Start critical section

-

-;1:	SKIP_IN_1		;Wait for idle

-;	rjmp	1b

-;2:	SKIP_IN_0		;Wait for start bit

-;	rjmp	2b

-	ldi	r25, BPS/2	;Wait for half bit time

-3:	dec	r25

-	brne	3b

-

-4:	ldi	r25, BPS	;----- Bit receiving loop

-5:	dec	r25     	;Wait for a bit time

-	brne	5b		;/

-	lsr	r24     	;Next bit

-	SKIP_IN_0		;Get a data bit into r24.7

-	ori	r24, 0x80

-	brcc	4b	     	;All bits received?  no, continue

-

-	ldi	r25, BPS/2	;Wait for half bit time

-6:	dec	r25

-	brne	6b

-7:	SKIP_IN_1		;Wait for stop bit

-	rjmp	7b

-

-	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

-	ret

-.endfunc

+;---------------------------------------------------------------------------;
+; Software implemented UART module                                          ;
+; (C)ChaN, 2005 (http://elm-chan.org/)                                      ;
+;---------------------------------------------------------------------------;
+; Bit rate settings:
+;
+;            1MHz  2MHz  4MHz  6MHz  8MHz  10MHz  12MHz  16MHz  20MHz
+;   2.4kbps   138     -     -     -     -      -      -      -      -
+;   4.8kbps    68   138     -     -     -      -      -      -      -
+;   9.6kbps    33    68   138   208     -      -      -      -      -
+;  19.2kbps     -    33    68   102   138    173    208      -      -
+;  38.4kbps     -     -    33    50    68     85    102    138    172
+;  57.6kbps     -     -    21    33    44     56     68     91    114
+; 115.2kbps     -     -     -     -    21     27     33     44     56
+
+.nolist
+#include <avr/io.h>
+.list
+
+#define	BPS	102 	/* Bit delay. (see above table) */
+#define	BIDIR	0	/* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
+
+#define	OUT_1		sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 1 */
+#define	OUT_0		cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 0 */
+#define	SKIP_IN_1	sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 1 */
+#define	SKIP_IN_0	sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 0 */
+
+
+
+#ifdef SPM_PAGESIZE
+.macro	_LPMI	reg
+	lpm	\reg, Z+
+.endm
+.macro	_MOVW	dh,dl, sh,sl
+	movw	\dl, \sl
+.endm
+#else
+.macro	_LPMI	reg
+	lpm
+	mov	\reg, r0
+	adiw	ZL, 1
+.endm
+.macro	_MOVW	dh,dl, sh,sl
+	mov	\dl, \sl
+	mov	\dh, \sh
+.endm
+#endif
+
+
+
+;---------------------------------------------------------------------------;
+; Transmit a byte in serial format of N81
+;
+;Prototype: void xmit (uint8_t data);
+;Size: 16 words
+
+.global xmit
+.func xmit
+xmit:
+#if BIDIR
+	ldi	r23, BPS-1	;Pre-idle time for bidirectional data line
+5:	dec	r23     	;
+	brne	5b		;/
+#endif
+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags
+
+	com	r24		;C = start bit
+	ldi	r25, 10		;Bit counter
+	cli			;Start critical section
+
+1:	ldi	r23, BPS-1	;----- Bit transferring loop 
+2:	dec	r23     	;Wait for a bit time
+	brne	2b		;/
+	brcs	3f		;MISO = bit to be sent
+	OUT_1			;
+3:	brcc	4f		;
+	OUT_0			;/
+4:	lsr	r24     	;Get next bit into C
+	dec	r25     	;All bits sent?
+	brne	1b	     	;  no, coutinue
+
+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section
+	ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------;
+; Receive a byte
+;
+;Prototype: uint8_t rcvr (void);
+;Size: 19 words
+
+.global rcvr
+.func rcvr
+rcvr:
+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags
+
+	ldi	r24, 0x80	;Receiving shift reg
+	cli			;Start critical section
+
+1:	SKIP_IN_1		;Wait for idle
+	rjmp	1b
+2:	SKIP_IN_0		;Wait for start bit
+	rjmp	2b
+	ldi	r25, BPS/2	;Wait for half bit time
+3:	dec	r25
+	brne	3b
+
+4:	ldi	r25, BPS	;----- Bit receiving loop
+5:	dec	r25     	;Wait for a bit time
+	brne	5b		;/
+	lsr	r24     	;Next bit
+	SKIP_IN_0		;Get a data bit into r24.7
+	ori	r24, 0x80
+	brcc	4b	     	;All bits received?  no, continue
+
+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section
+	ret
+.endfunc
+
+
+; Not wait for start bit. This should be called after detecting start bit.
+.global recv
+.func recv
+recv:
+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags
+
+	ldi	r24, 0x80	;Receiving shift reg
+	cli			;Start critical section
+
+;1:	SKIP_IN_1		;Wait for idle
+;	rjmp	1b
+;2:	SKIP_IN_0		;Wait for start bit
+;	rjmp	2b
+	ldi	r25, BPS/2	;Wait for half bit time
+3:	dec	r25
+	brne	3b
+
+4:	ldi	r25, BPS	;----- Bit receiving loop
+5:	dec	r25     	;Wait for a bit time
+	brne	5b		;/
+	lsr	r24     	;Next bit
+	SKIP_IN_0		;Get a data bit into r24.7
+	ori	r24, 0x80
+	brcc	4b	     	;All bits received?  no, continue
+
+	ldi	r25, BPS/2	;Wait for half bit time
+6:	dec	r25
+	brne	6b
+7:	SKIP_IN_1		;Wait for stop bit
+	rjmp	7b
+
+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section
+	ret
+.endfunc
diff --git a/tmk_core/protocol/iwrap/suart.h b/tmk_core/protocol/iwrap/suart.h
index 72725b998..7d92be069 100644
--- a/tmk_core/protocol/iwrap/suart.h
+++ b/tmk_core/protocol/iwrap/suart.h
@@ -1,8 +1,8 @@
-#ifndef SUART

-#define SUART

-

-void xmit(uint8_t);

-uint8_t rcvr(void);

-uint8_t recv(void);

-

-#endif	/* SUART */

+#ifndef SUART
+#define SUART
+
+void xmit(uint8_t);
+uint8_t rcvr(void);
+uint8_t recv(void);
+
+#endif	/* SUART */
diff --git a/tmk_core/protocol/iwrap/wd.h b/tmk_core/protocol/iwrap/wd.h
index 99058f033..12395bf69 100644
--- a/tmk_core/protocol/iwrap/wd.h
+++ b/tmk_core/protocol/iwrap/wd.h
@@ -1,159 +1,159 @@
-/* This is from http://www.mtcnet.net/~henryvm/wdt/ */

-#ifndef _AVR_WD_H_

-#define _AVR_WD_H_

-

-#include <avr/io.h>

-

-/*

-Copyright (c) 2009, Curt Van Maanen

-

-Permission to use, copy, modify, and/or distribute this software for any

-purpose with or without fee is hereby granted, provided that the above

-copyright notice and this permission notice appear in all copies.

-

-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES

-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF

-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN

-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF

-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

-

-

-include usage-

-    #include "wd.h"             //if in same directory as project

-    #include <avr/wd.h>         //if wd.h is in avr directory

-

-set watchdog modes and prescale

-

-usage-

-    WD_SET(mode,[timeout]);     //prescale always set

-

-modes-

-    WD_OFF                      disabled

-    WD_RST                      normal reset mode

-    WD_IRQ                      interrupt only mode (if supported)

-    WD_RST_IRQ                  interrupt+reset mode (if supported)

-

-timeout-

-    WDTO_15MS                   default if no timeout provided

-    WDTO_30MS

-    WDTO_60MS

-    WDTO_120MS

-    WDTO_250MS

-    WDTO_500MS

-    WDTO_1S

-    WDTO_2S

-    WDTO_4S                     (if supported)

-    WDTO_8S                     (if supported)

-

-examples-

-    WD_SET(WD_RST,WDTO_1S);     //reset mode, 1s timeout

-    WD_SET(WD_OFF);             //watchdog disabled (if not fused on)

-    WD_SET(WD_RST);             //reset mode, 15ms (default timeout)

-    WD_SET(WD_IRQ,WDTO_120MS);  //interrupt only mode, 120ms timeout

-    WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout

-

-

-for enhanced watchdogs, if the watchdog is not being used WDRF should be

-cleared on every power up or reset, along with disabling the watchdog-

-    WD_DISABLE();               //clear WDRF, then turn off watchdog

-

-*/

-

-//reset registers to the same name (MCUCSR)

-#if !defined(MCUCSR)

-#define MCUCSR                  MCUSR

-#endif

-

-//watchdog registers to the same name (WDTCSR)

-#if !defined(WDTCSR)

-#define WDTCSR                  WDTCR

-#endif

-

-//if enhanced watchdog, define irq values, create disable macro

-#if defined(WDIF)

-#define WD_IRQ                  0xC0

-#define WD_RST_IRQ              0xC8

-#define WD_DISABLE()            do{                       \

-                                    MCUCSR &= ~(1<<WDRF); \

-                                    WD_SET(WD_OFF);       \

-                                }while(0)

-#endif

-

-//all watchdogs

-#define WD_RST                  8

-#define WD_OFF                  0

-

-//prescale values

-#define WDTO_15MS               0

-#define WDTO_30MS               1

-#define WDTO_60MS               2

-#define WDTO_120MS              3

-#define WDTO_250MS              4

-#define WDTO_500MS              5

-#define WDTO_1S                 6

-#define WDTO_2S                 7

-

-//prescale values for avrs with WDP3

-#if defined(WDP3)

-#define WDTO_4S                 0x20

-#define WDTO_8S                 0x21

-#endif

-

-//watchdog reset

-#define WDR()                   __asm__ __volatile__("wdr")

-

-//avr reset using watchdog

-#define WD_AVR_RESET()          do{                              \

-                                    __asm__ __volatile__("cli"); \

-                                    WD_SET_UNSAFE(WD_RST);       \

-                                    while(1);                    \

-                                }while(0)

-

-/*set the watchdog-

-1. save SREG

-2. turn off irq's

-3. reset watchdog timer

-4. enable watchdog change

-5. write watchdog value

-6. restore SREG (restoring irq status)

-*/

-#define WD_SET(val,...)                                 \

-    __asm__ __volatile__(                               \

-        "in __tmp_reg__,__SREG__"           "\n\t"      \

-        "cli"                               "\n\t"      \

-        "wdr"                               "\n\t"      \

-        "sts %[wdreg],%[wden]"              "\n\t"      \

-        "sts %[wdreg],%[wdval]"             "\n\t"      \

-        "out __SREG__,__tmp_reg__"          "\n\t"      \

-        :                                               \

-        : [wdreg] "M" (&WDTCSR),                        \

-          [wden]  "r" ((uint8_t)(0x18)),                \

-          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \

-        : "r0"                                          \

-)

-

-/*set the watchdog when I bit in SREG known to be clear-

-1. reset watchdog timer

-2. enable watchdog change

-5. write watchdog value

-*/

-#define WD_SET_UNSAFE(val,...)                          \

-    __asm__ __volatile__(                               \

-        "wdr"                               "\n\t"      \

-        "sts %[wdreg],%[wden]"              "\n\t"      \

-        "sts %[wdreg],%[wdval]"             "\n\t"      \

-        :                                               \

-        : [wdreg] "M" (&WDTCSR),                        \

-          [wden]  "r" ((uint8_t)(0x18)),                \

-          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \

-)

-

-

-//for compatibility with avr/wdt.h

-#define wdt_enable(val) WD_SET(WD_RST,val)

-#define wdt_disable()   WD_SET(WD_OFF)

-

-

-#endif /* _AVR_WD_H_ */

+/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
+#ifndef _AVR_WD_H_
+#define _AVR_WD_H_
+
+#include <avr/io.h>
+
+/*
+Copyright (c) 2009, Curt Van Maanen
+
+Permission to use, copy, modify, and/or distribute this software for any
+purpose with or without fee is hereby granted, provided that the above
+copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
+include usage-
+    #include "wd.h"             //if in same directory as project
+    #include <avr/wd.h>         //if wd.h is in avr directory
+
+set watchdog modes and prescale
+
+usage-
+    WD_SET(mode,[timeout]);     //prescale always set
+
+modes-
+    WD_OFF                      disabled
+    WD_RST                      normal reset mode
+    WD_IRQ                      interrupt only mode (if supported)
+    WD_RST_IRQ                  interrupt+reset mode (if supported)
+
+timeout-
+    WDTO_15MS                   default if no timeout provided
+    WDTO_30MS
+    WDTO_60MS
+    WDTO_120MS
+    WDTO_250MS
+    WDTO_500MS
+    WDTO_1S
+    WDTO_2S
+    WDTO_4S                     (if supported)
+    WDTO_8S                     (if supported)
+
+examples-
+    WD_SET(WD_RST,WDTO_1S);     //reset mode, 1s timeout
+    WD_SET(WD_OFF);             //watchdog disabled (if not fused on)
+    WD_SET(WD_RST);             //reset mode, 15ms (default timeout)
+    WD_SET(WD_IRQ,WDTO_120MS);  //interrupt only mode, 120ms timeout
+    WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
+
+
+for enhanced watchdogs, if the watchdog is not being used WDRF should be
+cleared on every power up or reset, along with disabling the watchdog-
+    WD_DISABLE();               //clear WDRF, then turn off watchdog
+
+*/
+
+//reset registers to the same name (MCUCSR)
+#if !defined(MCUCSR)
+#define MCUCSR                  MCUSR
+#endif
+
+//watchdog registers to the same name (WDTCSR)
+#if !defined(WDTCSR)
+#define WDTCSR                  WDTCR
+#endif
+
+//if enhanced watchdog, define irq values, create disable macro
+#if defined(WDIF)
+#define WD_IRQ                  0xC0
+#define WD_RST_IRQ              0xC8
+#define WD_DISABLE()            do{                       \
+                                    MCUCSR &= ~(1<<WDRF); \
+                                    WD_SET(WD_OFF);       \
+                                }while(0)
+#endif
+
+//all watchdogs
+#define WD_RST                  8
+#define WD_OFF                  0
+
+//prescale values
+#define WDTO_15MS               0
+#define WDTO_30MS               1
+#define WDTO_60MS               2
+#define WDTO_120MS              3
+#define WDTO_250MS              4
+#define WDTO_500MS              5
+#define WDTO_1S                 6
+#define WDTO_2S                 7
+
+//prescale values for avrs with WDP3
+#if defined(WDP3)
+#define WDTO_4S                 0x20
+#define WDTO_8S                 0x21
+#endif
+
+//watchdog reset
+#define WDR()                   __asm__ __volatile__("wdr")
+
+//avr reset using watchdog
+#define WD_AVR_RESET()          do{                              \
+                                    __asm__ __volatile__("cli"); \
+                                    WD_SET_UNSAFE(WD_RST);       \
+                                    while(1);                    \
+                                }while(0)
+
+/*set the watchdog-
+1. save SREG
+2. turn off irq's
+3. reset watchdog timer
+4. enable watchdog change
+5. write watchdog value
+6. restore SREG (restoring irq status)
+*/
+#define WD_SET(val,...)                                 \
+    __asm__ __volatile__(                               \
+        "in __tmp_reg__,__SREG__"           "\n\t"      \
+        "cli"                               "\n\t"      \
+        "wdr"                               "\n\t"      \
+        "sts %[wdreg],%[wden]"              "\n\t"      \
+        "sts %[wdreg],%[wdval]"             "\n\t"      \
+        "out __SREG__,__tmp_reg__"          "\n\t"      \
+        :                                               \
+        : [wdreg] "M" (&WDTCSR),                        \
+          [wden]  "r" ((uint8_t)(0x18)),                \
+          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \
+        : "r0"                                          \
+)
+
+/*set the watchdog when I bit in SREG known to be clear-
+1. reset watchdog timer
+2. enable watchdog change
+5. write watchdog value
+*/
+#define WD_SET_UNSAFE(val,...)                          \
+    __asm__ __volatile__(                               \
+        "wdr"                               "\n\t"      \
+        "sts %[wdreg],%[wden]"              "\n\t"      \
+        "sts %[wdreg],%[wdval]"             "\n\t"      \
+        :                                               \
+        : [wdreg] "M" (&WDTCSR),                        \
+          [wden]  "r" ((uint8_t)(0x18)),                \
+          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \
+)
+
+
+//for compatibility with avr/wdt.h
+#define wdt_enable(val) WD_SET(WD_RST,val)
+#define wdt_disable()   WD_SET(WD_OFF)
+
+
+#endif /* _AVR_WD_H_ */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
index 72f3ff04c..02e7063c6 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
@@ -1,161 +1,161 @@
-<asf xmlversion="1.0">

-	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">

-		<info type="description" value="summary">

-		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderCDC.c"/>

-		<build type="header-file" value="BootloaderCDC.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+		<info type="description" value="summary">
+		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderCDC.c"/>
+		<build type="header-file" value="BootloaderCDC.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
index 6f3312b76..f56aba69f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">

-		<info type="description" value="summary">

-		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderDFU.c"/>

-		<build type="header-file" value="BootloaderDFU.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+		<info type="description" value="summary">
+		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderDFU.c"/>
+		<build type="header-file" value="BootloaderDFU.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
index 9394b1353..c67b9419e 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
@@ -1,123 +1,123 @@
-<asf xmlversion="1.0">

-	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-	</project>

-

-	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-	</project>

-

-	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-	</project>

-

-	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>

-	</project>

-

-	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">

-		<info type="description" value="summary">

-		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderHID.c"/>

-		<build type="header-file" value="BootloaderHID.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+	</project>
+
+	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+	</project>
+
+	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+	</project>
+
+	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+	</project>
+
+	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+		<info type="description" value="summary">
+		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderHID.c"/>
+		<build type="header-file" value="BootloaderHID.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
index 6844d4b01..91fc94966 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
@@ -1,102 +1,102 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-#if AUX_BOOT_SECTION_SIZE > 0

-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).

-

-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,

-; on devices where an AUX bootloader section is used.

-.section .boot_aux_trampoline, "ax"

-.global Boot_AUX_Trampoline

-Boot_AUX_Trampoline:

-	jmp BOOT_START_ADDR

-#endif

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF30 ; Signature for the MS class bootloader, V1

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+	jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF30 ; Signature for the MS class bootloader, V1
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
index f1d550d1e..700ffa26f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">

-		<info type="description" value="summary">

-		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderMassStorage.c"/>

-		<build type="header-file" value="BootloaderMassStorage.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="include-path" value="Lib"/>

-		<build type="header-file" value="Lib/VirtualFAT.h"/>

-		<build type="c-source" value="Lib/VirtualFAT.c"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+		<info type="description" value="summary">
+		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderMassStorage.c"/>
+		<build type="header-file" value="BootloaderMassStorage.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="include-path" value="Lib"/>
+		<build type="header-file" value="Lib/VirtualFAT.h"/>
+		<build type="c-source" value="Lib/VirtualFAT.c"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
index 91bb4038e..a0edb2c4f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
@@ -1,68 +1,68 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderMassStorage

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the

-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum

-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.

-ifeq ($(BOOT_SECTION_SIZE_KB),8)

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0

-else

-  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))

-

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'

-  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))

-  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)

-endif

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderMassStorage
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0
+else
+  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
index ec499b74e..88c51da82 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
@@ -1,91 +1,91 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF20 ; Signature for the Printer class bootloader

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF20 ; Signature for the Printer class bootloader
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
index 86a56911e..b5c0c6b3a 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
@@ -1,159 +1,159 @@
-<asf xmlversion="1.0">

-	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">

-		<info type="description" value="summary">

-		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderPrinter.c"/>

-		<build type="header-file" value="BootloaderPrinter.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+		<info type="description" value="summary">
+		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderPrinter.c"/>
+		<build type="header-file" value="BootloaderPrinter.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
index 0716c3bbe..0db035de3 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
@@ -1,55 +1,55 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderPrinter

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderPrinter
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
index 9fd188c93..e839ba6b1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
@@ -1,42 +1,42 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-F_CPU        = 1000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = HID_EEPROM_Loader

-SRC          = $(TARGET).c

-LUFA_PATH    = ../../../LUFA

-CC_FLAGS     =

-LD_FLAGS     =

-OBJECT_FILES = InputEEData.o

-

-# Default target

-all:

-

-# Determine the AVR sub-architecture of the build main application object file

-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)

-

-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section

-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)

-	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"

-	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_hid.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+F_CPU        = 1000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = HID_EEPROM_Loader
+SRC          = $(TARGET).c
+LUFA_PATH    = ../../../LUFA
+CC_FLAGS     =
+LD_FLAGS     =
+OBJECT_FILES = InputEEData.o
+
+# Default target
+all:
+
+# Determine the AVR sub-architecture of the build main application object file
+FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
+
+# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
+InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
+	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
+	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
index fd65db283..e952714e1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">

-	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="atxmega256a3bu"/>

-		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.device" caption="USB Device Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB device mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Device"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="DeviceApplication.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="DeviceApplication.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.xmega"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="atxmega256a3bu"/>
+		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+
+		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.device" caption="USB Device Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB device mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Device"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="DeviceApplication.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="DeviceApplication.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
index c1996ec71..c3860c056 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
@@ -1,41 +1,41 @@
-<asf xmlversion="1.0">

-	<project caption="USB Host Template" id="lufa.templates.host.project">

-		<require idref="lufa.templates.host"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.host" caption="USB Host Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB host mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Host"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="HostApplication.c"/>

-		<build type="header-file" value="HostApplication.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Host Template" id="lufa.templates.host.project">
+		<require idref="lufa.templates.host"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.host" caption="USB Host Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB host mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Host"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="HostApplication.c"/>
+		<build type="header-file" value="HostApplication.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
index 7ddfa1be3..0ae1dd678 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
@@ -1,975 +1,975 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_BuildSystem The LUFA Build System

- *

- *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System

- *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which

- *  can be referenced in a LUFA powered project, to minimize the amount of code required in an

- *  application makefile. The system is written in GNU Make, and each module is independent of

- *  one-another.

- *

- *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA

- *  build system, see \ref Sec_CompilingApps_Prerequisites.

- *

- *  To use a LUFA build system module, simply add an include to your project makefile. All user projects

- *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  Once included in your project makefile, the associated build module targets will be added to your

- *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>

- *  from the command line, substituting in the appropriate target name.

- *

- *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.

- *

- *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>

- *  be supplied in the project makefile for the module to work, and one or more optional parameters which

- *  may be defined and which will assume a sensible default if not.

- *

- *  \section SSec_BuildSystem_Modules Available Modules

- *

- *  The following modules are included in this LUFA release:

- *

- *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming

- *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming

- *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking

- *  \li \subpage Page_BuildModule_CORE - Core Build System Functions

- *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis

- *  \li \subpage Page_BuildModule_DFU - Device Programming

- *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation

- *  \li \subpage Page_BuildModule_HID - Device Programming

- *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables

- *

- *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.

- */

-

- /** \page Page_BuildModule_BUILD The BUILD build module

- *

- *  The BUILD LUFA build system module, providing targets for the compilation,

- *  assembling and linking of an application from source code into binary files

- *  suitable for programming into a target device, using the GCC compiler.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_build.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_BUILD_Requirements Requirements

- *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your

- *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio

- *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.

- *

- *  \section SSec_BuildModule_BUILD_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>size</tt></td>

- *    <td>Display size of the compiled application FLASH and SRAM segments.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>symbol-sizes</tt></td>

- *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lib</tt></td>

- *    <td>Build and archive all source files into a library A binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>all</tt></td>

- *    <td>Build and link the application into ELF debug and HEX binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>elf</tt></td>

- *    <td>Build and link the application into an ELF debug file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>bin</tt></td>

- *    <td>Build and link the application and produce a BIN binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hex</tt></td>

- *    <td>Build and link the application and produce HEX and EEP binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lss</tt></td>

- *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>clean</tt></td>

- *    <td>Remove all intermediary files and binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>mostlyclean</tt></td>

- *    <td>Remove all intermediary files but preserve any binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>

- *    <td>Create an assembly listing of a given input C/C++ source file.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_USB</tt></td>

- *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>BOARD</tt></td>

- *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OPTIMIZATION</tt></td>

- *    <td>Optimization level to use when compiling source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_STANDARD</tt></td>

- *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_STANDARD</tt></td>

- *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_FORMAT</tt></td>

- *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_LEVEL</tt></td>

- *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_CPU</tt></td>

- *    <td>Speed of the processor CPU clock, in Hz.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_FLAGS</tt></td>

- *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_FLAGS</tt></td>

- *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ASM_FLAGS</tt></td>

- *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CC_FLAGS</tt></td>

- *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>COMPILER_PATH</tt></td>

- *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LD_FLAGS</tt></td>

- *    <td>Flags to pass to the linker, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LINKER_RELAXATIONS</tt></td>

- *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size

- *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.

- *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you

- *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJDIR</tt></td>

- *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.

- *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJECT_FILES</tt></td>

- *    <td>List of additional object files that should be linked into the resulting binary.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_CORE The CORE build module

- *

- *  The core LUFA build system module, providing common build system help and information targets.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CORE_Requirements Requirements

- *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>

- *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).

- *

- *  \section SSec_BuildModule_CORE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>help</tt></td>

- *    <td>Display build system help and configuration information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_targets</tt></td>

- *    <td>List all available build targets from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_modules</tt></td>

- *    <td>List all available build modules from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_mandatory</tt></td>

- *    <td>List all mandatory parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_optional</tt></td>

- *    <td>List all optional parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_provided</tt></td>

- *    <td>List all variables provided by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_macros</tt></td>

- *    <td>List all macros provided by the included modules.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module

- *

- *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_atprogram.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements

- *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x

- *  inside the application install folder's "\atbackend" subdirectory.

- *

- *  \section SSec_BuildModule_ATPROGRAM_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>atprogram</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>atprogram-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>

- *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_INTERFACE</tt></td>

- *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module

- *

- *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_avrdude.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements

- *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for

- *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's

- *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.

- *

- *  \section SSec_BuildModule_AVRDUDE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>avrdude</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>avrdude-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>

- *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_FLAGS</tt></td>

- *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module

- *

- *  The CPPCHECK programming utility LUFA build system module, providing targets to statically

- *  analyze C and C++ source code for errors and performance/style issues.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements

- *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page

- *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via

- *  the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_CPPCHECK_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>cppcheck</tt></td>

- *    <td>Statically analyze the project source code for issues.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>cppcheck-config</tt></td>

- *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of source files to statically analyze.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>CPPCHECK_INCLUDES</tt></td>

- *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_EXCLUDES</tt></td>

- *    <td>Paths or path fragments to exclude when analyzing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>

- *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_ENABLE</tt></td>

- *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_SUPPRESS</tt></td>

- *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_QUIET</tt></td>

- *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FLAGS</tt></td>

- *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DFU The DFU build module

- *

- *  The DFU programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *  This module requires a DFU class bootloader to be running in the target, compatible with

- *  the DFU bootloader protocol as published by Atmel.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_dfu.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DFU_Requirements Requirements

- *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open

- *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be

- *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility

- *  can be installed via the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_DFU_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>dfu</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>dfu-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module

- *

- *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate

- *  project HTML and other format documentation from a set of source files that include special

- *  Doxygen comments.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_doxygen.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements

- *  This module requires the <tt>doxygen</tt> utility from the Doxygen website

- *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix

- *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through

- *  the package manager.

- *

- *  \section SSec_BuildModule_DOXYGEN_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>doxygen</tt></td>

- *    <td>Generate project documentation.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_create</tt></td>

- *    <td>Create a new Doxygen configuration file using the latest template.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_upgrade</tt></td>

- *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>DOXYGEN_CONF</tt></td>

- *    <td>Name and path of the base Doxygen configuration file for the project.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>

- *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_HID The HID build module

- *

- *  The HID programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor's FLASH memory with a project's compiled binary output file. This module

- *  requires a HID class bootloader to be running in the target, using a protocol compatible

- *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_hid.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_HID_Requirements Requirements

- *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID

- *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC

- *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>

- *  variable.

- *

- *  \section SSec_BuildModule_HID_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>hid</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hid-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_SOURCES The SOURCES build module

- *

- *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files

- *  required to be build by a project for a given LUFA module. This module gives a way to reference

- *  LUFA source files symbolically, so that changes to the library structure do not break the library

- *  makefile.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_sources.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_SOURCES_Requirements Requirements

- *  None.

- *

- *  \section SSec_BuildModule_SOURCES_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_SRC_USB</tt></td>

- *    <td>List of LUFA USB driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_USBCLASS</tt></td>

- *    <td>List of LUFA USB Class driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>

- *    <td>List of LUFA temperature sensor driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_SERIAL</tt></td>

- *    <td>List of LUFA Serial U(S)ART driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TWI</tt></td>

- *    <td>List of LUFA TWI driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_PLATFORM</tt></td>

- *    <td>List of LUFA architecture specific platform management source files.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildTroubleshooting Troubleshooting Information

- *

- *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these

- *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different

- *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.

- *

- *  <table>

- *    <tr>

- *    <th>Problem</th>

- *    <th>Resolution</th>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>

- *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>

- *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with

- *        GNU make or other variants of Make causing an infinitely recursive build.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>

- *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA

- *        build system modules. Define the value in your project makefile and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration

- *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").

- *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not

- *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>

- *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.

- *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or

- *        relative path given in the user project makefile is correct and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>

- *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists

- *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration

- *        file.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration

- *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or

- *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>

- *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or

- *        absolute path to the LUFA library core.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>

- *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be

- *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>

- *        parameter.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>

- *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This

- *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the

- *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the

- *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA

- *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>

- *   </tr>

- *  </table>

- *

- *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildSystem The LUFA Build System
+ *
+ *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which
+ *  can be referenced in a LUFA powered project, to minimize the amount of code required in an
+ *  application makefile. The system is written in GNU Make, and each module is independent of
+ *  one-another.
+ *
+ *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
+ *  build system, see \ref Sec_CompilingApps_Prerequisites.
+ *
+ *  To use a LUFA build system module, simply add an include to your project makefile. All user projects
+ *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  Once included in your project makefile, the associated build module targets will be added to your
+ *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
+ *  from the command line, substituting in the appropriate target name.
+ *
+ *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
+ *
+ *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
+ *  be supplied in the project makefile for the module to work, and one or more optional parameters which
+ *  may be defined and which will assume a sensible default if not.
+ *
+ *  \section SSec_BuildSystem_Modules Available Modules
+ *
+ *  The following modules are included in this LUFA release:
+ *
+ *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
+ *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming
+ *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
+ *  \li \subpage Page_BuildModule_CORE - Core Build System Functions
+ *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
+ *  \li \subpage Page_BuildModule_DFU - Device Programming
+ *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
+ *  \li \subpage Page_BuildModule_HID - Device Programming
+ *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
+ *
+ *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
+ */
+
+ /** \page Page_BuildModule_BUILD The BUILD build module
+ *
+ *  The BUILD LUFA build system module, providing targets for the compilation,
+ *  assembling and linking of an application from source code into binary files
+ *  suitable for programming into a target device, using the GCC compiler.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_build.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_BUILD_Requirements Requirements
+ *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your
+ *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
+ *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
+ *
+ *  \section SSec_BuildModule_BUILD_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>size</tt></td>
+ *    <td>Display size of the compiled application FLASH and SRAM segments.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>symbol-sizes</tt></td>
+ *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lib</tt></td>
+ *    <td>Build and archive all source files into a library A binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>all</tt></td>
+ *    <td>Build and link the application into ELF debug and HEX binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>elf</tt></td>
+ *    <td>Build and link the application into an ELF debug file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>bin</tt></td>
+ *    <td>Build and link the application and produce a BIN binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hex</tt></td>
+ *    <td>Build and link the application and produce HEX and EEP binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lss</tt></td>
+ *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>clean</tt></td>
+ *    <td>Remove all intermediary files and binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>mostlyclean</tt></td>
+ *    <td>Remove all intermediary files but preserve any binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
+ *    <td>Create an assembly listing of a given input C/C++ source file.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_USB</tt></td>
+ *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>BOARD</tt></td>
+ *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OPTIMIZATION</tt></td>
+ *    <td>Optimization level to use when compiling source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_STANDARD</tt></td>
+ *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_STANDARD</tt></td>
+ *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_FORMAT</tt></td>
+ *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_LEVEL</tt></td>
+ *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_CPU</tt></td>
+ *    <td>Speed of the processor CPU clock, in Hz.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_FLAGS</tt></td>
+ *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_FLAGS</tt></td>
+ *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ASM_FLAGS</tt></td>
+ *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CC_FLAGS</tt></td>
+ *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>COMPILER_PATH</tt></td>
+ *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LD_FLAGS</tt></td>
+ *    <td>Flags to pass to the linker, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LINKER_RELAXATIONS</tt></td>
+ *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
+ *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
+ *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
+ *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJDIR</tt></td>
+ *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
+ *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJECT_FILES</tt></td>
+ *    <td>List of additional object files that should be linked into the resulting binary.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_CORE The CORE build module
+ *
+ *  The core LUFA build system module, providing common build system help and information targets.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CORE_Requirements Requirements
+ *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
+ *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
+ *
+ *  \section SSec_BuildModule_CORE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>help</tt></td>
+ *    <td>Display build system help and configuration information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_targets</tt></td>
+ *    <td>List all available build targets from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_modules</tt></td>
+ *    <td>List all available build modules from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_mandatory</tt></td>
+ *    <td>List all mandatory parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_optional</tt></td>
+ *    <td>List all optional parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_provided</tt></td>
+ *    <td>List all variables provided by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_macros</tt></td>
+ *    <td>List all macros provided by the included modules.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
+ *
+ *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_atprogram.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
+ *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
+ *  inside the application install folder's "\atbackend" subdirectory.
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>atprogram</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>atprogram-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
+ *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_INTERFACE</tt></td>
+ *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
+ *
+ *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_avrdude.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements
+ *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
+ *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
+ *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>avrdude</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>avrdude-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>
+ *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_FLAGS</tt></td>
+ *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
+ *
+ *  The CPPCHECK programming utility LUFA build system module, providing targets to statically
+ *  analyze C and C++ source code for errors and performance/style issues.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements
+ *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
+ *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
+ *  the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>cppcheck</tt></td>
+ *    <td>Statically analyze the project source code for issues.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>cppcheck-config</tt></td>
+ *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of source files to statically analyze.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>CPPCHECK_INCLUDES</tt></td>
+ *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_EXCLUDES</tt></td>
+ *    <td>Paths or path fragments to exclude when analyzing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
+ *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_ENABLE</tt></td>
+ *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_SUPPRESS</tt></td>
+ *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_QUIET</tt></td>
+ *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FLAGS</tt></td>
+ *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DFU The DFU build module
+ *
+ *  The DFU programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *  This module requires a DFU class bootloader to be running in the target, compatible with
+ *  the DFU bootloader protocol as published by Atmel.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_dfu.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DFU_Requirements Requirements
+ *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
+ *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
+ *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
+ *  can be installed via the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_DFU_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>dfu</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>dfu-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
+ *
+ *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
+ *  project HTML and other format documentation from a set of source files that include special
+ *  Doxygen comments.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_doxygen.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements
+ *  This module requires the <tt>doxygen</tt> utility from the Doxygen website
+ *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
+ *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
+ *  the package manager.
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>doxygen</tt></td>
+ *    <td>Generate project documentation.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_create</tt></td>
+ *    <td>Create a new Doxygen configuration file using the latest template.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_upgrade</tt></td>
+ *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>DOXYGEN_CONF</tt></td>
+ *    <td>Name and path of the base Doxygen configuration file for the project.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
+ *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_HID The HID build module
+ *
+ *  The HID programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor's FLASH memory with a project's compiled binary output file. This module
+ *  requires a HID class bootloader to be running in the target, using a protocol compatible
+ *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_hid.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_HID_Requirements Requirements
+ *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
+ *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
+ *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
+ *  variable.
+ *
+ *  \section SSec_BuildModule_HID_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>hid</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hid-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_SOURCES The SOURCES build module
+ *
+ *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files
+ *  required to be build by a project for a given LUFA module. This module gives a way to reference
+ *  LUFA source files symbolically, so that changes to the library structure do not break the library
+ *  makefile.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_sources.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_SOURCES_Requirements Requirements
+ *  None.
+ *
+ *  \section SSec_BuildModule_SOURCES_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USB</tt></td>
+ *    <td>List of LUFA USB driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ *    <td>List of LUFA USB Class driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ *    <td>List of LUFA temperature sensor driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_SERIAL</tt></td>
+ *    <td>List of LUFA Serial U(S)ART driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TWI</tt></td>
+ *    <td>List of LUFA TWI driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ *    <td>List of LUFA architecture specific platform management source files.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildTroubleshooting Troubleshooting Information
+ *
+ *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
+ *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
+ *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
+ *
+ *  <table>
+ *    <tr>
+ *    <th>Problem</th>
+ *    <th>Resolution</th>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
+ *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ *        GNU make or other variants of Make causing an infinitely recursive build.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
+ *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ *        build system modules. Define the value in your project makefile and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
+ *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ *        relative path given in the user project makefile is correct and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
+ *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ *        file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
+ *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ *        absolute path to the LUFA library core.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
+ *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ *        parameter.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
+ *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ */