Added S60-X to keyboards with two layouts.

12 files changed, 590 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
index 8c85d6ffa..07bbf13db 100644
--- a/.gitignore
+++ b/.gitignore
@@ -28,3 +28,4 @@ CMakeLists.txt
 .settings/
 .idea
 .browse.VC.db*
+*.stackdump
diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
new file mode 100644
index 000000000..57edd5e03
--- /dev/null
+++ b/keyboards/s60-x/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
new file mode 100644
index 000000000..d548a99b3
--- /dev/null
+++ b/keyboards/s60-x/config.h
@@ -0,0 +1,164 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Massdrop
+#define PRODUCT         S60-X
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/s60-x/keymaps/default/Makefile b/keyboards/s60-x/keymaps/default/Makefile
new file mode 100644
index 000000000..f4671a9d1
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
new file mode 100644
index 000000000..aa2856525
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -0,0 +1,92 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+	* |-----------------------------------------------------------|
+	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,  NO,   BSPC, \
+		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT, NO,   ENT,  \
+		LSFT, NO,   Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, NO,   RSFT, NO, \
+		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
+
+	/* Layout 1: Function Layer
+	* ,-----------------------------------------------------------.
+	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
+		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
+		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
+		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
+		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
+	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
+	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
+	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md
new file mode 100644
index 000000000..73318dad7
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/Makefile b/keyboards/s60-x/keymaps/felix/Makefile
new file mode 100644
index 000000000..251e4631d
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
new file mode 100644
index 000000000..a5ff1ae4d
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -0,0 +1,110 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|BckSp|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |Fn1 |
+	* |-----------------------------------------------------------|
+	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_FN1, \
+		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+
+	/* Layout 1: Gaming Layer, SpaceFn disabled
+	* ,-----------------------------------------------------------.
+	* |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+	* |-----------------------------------------------------------|
+	* |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+	* |-----------------------------------------------------------|
+	* |      |   |   |   |   |   |   |   |   |   |   |   |        |
+	* |-----------------------------------------------------------|
+	* |        |   |   |   |   |   |   |   |   |   |   |     |Fn1 |
+	* |-----------------------------------------------------------|
+	* |   | NOP|     |          Space         |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
+		KC_TRNS, KC_NO,   KC_TRNS,                   KC_SPC,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	/* Layout 2: Function Layer
+	* ,-----------------------------------------------------------.
+	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |RES|
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Rsft|
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |Home|PDn |End |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
+		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
+		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
+		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_RSFT, \
+		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_TOGGLE(1),                /* Disable SpaceFn  */
+	[2] = ACTION_LAYER_MOMENTARY(2)             /* SpaceFn layout 1 */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/readme.md b/keyboards/s60-x/keymaps/felix/readme.md
new file mode 100644
index 000000000..73318dad7
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
new file mode 100644
index 000000000..34c48b0b7
--- /dev/null
+++ b/keyboards/s60-x/readme.md
@@ -0,0 +1,32 @@
+S60-x keyboard firmware
+======================
+DIY compact keyboard by Massdrop. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/jpec/s60x).
+
+## S60X Resources
+- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit)
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/s60-x folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c
new file mode 100644
index 000000000..417358140
--- /dev/null
+++ b/keyboards/s60-x/s60-x.c
@@ -0,0 +1,28 @@
+#include "s60-x.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
new file mode 100644
index 000000000..714de30db
--- /dev/null
+++ b/keyboards/s60-x/s60-x.h
@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Vinícius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef S60X_H
+#define S60X_H
+
+#include "quantum.h"
+
+/* S60-X keymap definition macro
+* K2C, K31 and  K3C are extra keys for ISO
+* K0D is extra key from split backspace, K3E is extra key from split right shift
+*/
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO    }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO    }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
+}
+
+#endif