summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorEric Tang <e_l_tang@outlook.com>2016-06-07 03:53:37 +0200
committerJack Humbert <jack.humb@gmail.com>2016-06-07 03:53:37 +0200
commit219e4a3012baeeb301b57b97c1b274458f124ac2 (patch)
treefb3077a4c6e2e1e9f48a4849c8daee89a46622da
parent408c9e159b88161f660886f9697ed4ddd8fdff00 (diff)
downloadqmk_firmware-219e4a3012baeeb301b57b97c1b274458f124ac2.tar.gz
qmk_firmware-219e4a3012baeeb301b57b97c1b274458f124ac2.tar.xz
Fix hand wiring guide (#387)
* Fix broken link * Fix incoherent sentence
-rw-r--r--doc/HAND_WIRE.md4
1 files changed, 2 insertions, 2 deletions
diff --git a/doc/HAND_WIRE.md b/doc/HAND_WIRE.md
index 704930a53..f5dfc0753 100644
--- a/doc/HAND_WIRE.md
+++ b/doc/HAND_WIRE.md
@@ -195,7 +195,7 @@ You'll want to navigate to the `keyboard/<project_name>/` folder by typing, like
#### config.h
-The first thing you're going to want to modify is the `config.h` file. Find `MATRIX_ROWS` and `MATRIX_COLS` and them to match the dimensions of your keyboard's matrix.
+The first thing you're going to want to modify is the `config.h` file. Find `MATRIX_ROWS` and `MATRIX_COLS` and change their definitions to match the dimensions of your keyboard's matrix.
Farther down are `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. Change their definitions to match how you wired up your matrix (looking from the top of the keyboard, the rows run top-to-bottom and the columns run left-to-right). Likewise, change the definition of `UNUSED_PINS` to match the pins you did not use (this will save power).
@@ -282,7 +282,7 @@ It's also important to use the `KEYMAP` function we defined earlier - this is wh
#### Compiling your firmware
-After you've written out your entire keymap, you're ready to get the firmware compiled and onto your Teensy. Before compiling, you'll need to get your [development environment set-up](https://github.com/jackhumbert/qmk_firmware/blob/master/keyboard/planck/PCB_GUIDE.md#setting-up-the-environment) - you can skip the dfu-programmer instructions, but you'll need to download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html) to get the firmware on your Teensy.
+After you've written out your entire keymap, you're ready to get the firmware compiled and onto your Teensy. Before compiling, you'll need to get your [development environment set-up](./BUILD_GUIDE.md) - you can skip the dfu-programmer instructions, but you'll need to download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html) to get the firmware on your Teensy.
Once everything is installed, running `make` in the terminal should get you some output, and eventually a `<project_name>.hex` file in that folder. If you're having trouble with this step, see the end of the guide for the trouble-shooting section.