diff options
author | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
commit | 60b30c036397cb5627fa374bb930794b225daa29 (patch) | |
tree | e156c2d6b27f01db6985f2cc560c9c345d48fdac /LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h | |
download | qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.gz qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.xz |
Squashed 'lib/lufa/' content from commit 385d40300
git-subtree-dir: lib/lufa
git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b
Diffstat (limited to 'LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h')
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h | 293 |
1 files changed, 293 insertions, 0 deletions
diff --git a/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h b/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h new file mode 100644 index 000000000..802c5912d --- /dev/null +++ b/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h @@ -0,0 +1,293 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Device mode driver for the library USB Printer Class driver. + * + * Device mode driver for the library USB Printer Class driver. + * + * \note This file should not be included directly. It is automatically included as needed by the USB module driver + * dispatch header located in LUFA/Drivers/USB.h. + */ + +/** \ingroup Group_USBClassPrinter + * \defgroup Group_USBClassPrinterDevice Printer Class Device Mode Driver + * + * \section Sec_USBClassPrinterDevice_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Class/Device/PrinterClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i> + * + * \section Sec_USBClassPrinterDevice_ModDescription Module Description + * Device Mode USB Class driver framework interface, for the Printer USB Class driver. + * + * @{ + */ + +#ifndef _PRINTER_CLASS_DEVICE_H_ +#define _PRINTER_CLASS_DEVICE_H_ + + /* Includes: */ + #include "../../USB.h" + #include "../Common/PrinterClassCommon.h" + + #include <stdio.h> + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_PRINTER_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** \brief Printer Class Device Mode Configuration and State Structure. + * + * Class state structure. An instance of this structure should be made for each Printer interface + * within the user application, and passed to each of the Printer class driver functions as the + * PRNTInterfaceInfo parameter. This stores each Printer interface's configuration and state information. + */ + typedef struct + { + struct + { + uint8_t InterfaceNumber; /**< Interface number of the Printer interface within the device. */ + + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + + char* IEEE1284String; /**< IEEE 1284 identification string, sent to the host during enumeration + * to identify the printer model, manufacturer and other characteristics. + */ + } Config; /**< Config data for the USB class interface within the device. All elements in this section + * <b>must</b> be set or the interface will fail to enumerate and operate correctly. + */ + struct + { + uint8_t PortStatus; /**< Current status of the Printer virtual port, a collection of \c PRNT_PORTSTATUS_* + * bitmask values. + */ + + volatile bool IsPrinterReset; /**< Flag indicating that the host has requested that the Printer interface be reset + * and that all current Mass Storage operations should immediately abort. + */ + } State; /**< State data for the USB class interface within the device. All elements in this section + * are reset to their defaults when the interface is enumerated. + */ + } USB_ClassInfo_PRNT_Device_t; + + /* Function Prototypes: */ + /** Configures the endpoints of a given Printer interface, ready for use. This should be linked to the library + * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing + * the given Printer interface is selected. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * + * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise. + */ + bool PRNT_Device_ConfigureEndpoints(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Processes incoming control requests from the host, that are directed to the given Printer class interface. This should be + * linked to the library \ref EVENT_USB_Device_ControlRequest() event. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + */ + void PRNT_Device_ProcessControlRequest(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** General management task for a given Printer class interface, required for the correct operation of the interface. This should + * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + */ + void PRNT_Device_USBTask(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Printer class driver event for a soft reset request on a Printer interface. This event fires each time the host + * requests a reset of the printer interface's internal state, and may be hooked in the user program by declaring a + * handler function with the same name and parameters listed here. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + */ + void EVENT_PRNT_Device_SoftReset(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Sends a given data buffer to the attached USB host, if connected. If a host is not connected when the function is + * called, the string is discarded. Bytes will be queued for transmission to the host until either the endpoint bank + * becomes full, or the \ref PRNT_Device_Flush() function is called to flush the pending data to the host. This allows + * for multiple bytes to be packed into a single endpoint packet, increasing data throughput. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * \param[in] Buffer Pointer to a buffer containing the data to send to the device. + * \param[in] Length Length of the data to send to the host. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t PRNT_Device_SendData(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo, + const void* const Buffer, + const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Sends a given null terminated string to the attached USB host, if connected. If a host is not connected when + * the function is called, the string is discarded. Bytes will be queued for transmission to the host until either + * the endpoint bank becomes full, or the \ref PRNT_Device_Flush() function is called to flush the pending data to + * the host. This allows for multiple bytes to be packed into a single endpoint packet, increasing data throughput. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * \param[in] String Pointer to the null terminated string to send to the host. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t PRNT_Device_SendString(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo, + const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the + * byte is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the + * \ref PRNT_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * packed into a single endpoint packet, increasing data throughput. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * \param[in] Data Byte of data to send to the host. + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t PRNT_Device_SendByte(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo, + const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1); + + /** Determines the number of bytes received by the Printer interface from the host, waiting to be read. This indicates the number + * of bytes in the OUT endpoint bank only, and thus the number of calls to \ref PRNT_Device_ReceiveByte() which are guaranteed to + * succeed immediately. If multiple bytes are to be received, they should be buffered by the user application, as the endpoint + * bank will not be released back to the USB controller until all bytes are read. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * + * \return Total number of buffered bytes received from the host. + */ + uint16_t PRNT_Device_BytesReceived(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function + * returns a negative value. The \ref PRNT_Device_BytesReceived() function may be queried in advance to determine how many + * bytes are currently buffered in the Printer interface's data receive endpoint bank, and thus how many repeated calls to this + * function which are guaranteed to succeed. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * + * \return Next received byte from the host, or a negative value if no data received. + */ + int16_t PRNT_Device_ReceiveByte(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. + * + * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or + * the call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t PRNT_Device_Flush(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + #if defined(FDEV_SETUP_STREAM) || defined(__DOXYGEN__) + /** Creates a standard character stream for the given Printer Device instance so that it can be used with all the regular + * functions in the standard <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf()). The created + * stream is bidirectional and can be used for both input and output functions. + * + * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single + * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may + * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own + * line buffering. + * + * \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions + * to the given Printer interface. + * \n\n + * + * \note This function is not available on all microcontroller architectures. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed. + */ + void PRNT_Device_CreateStream(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo, + FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Identical to \ref PRNT_Device_CreateStream(), except that reads are blocking until the calling stream function terminates + * the transfer. While blocking, the USB and Printer service tasks are called repeatedly to maintain USB communications. + * + * \note This function is not available on all microcontroller architectures. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class configuration and state. + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed. + */ + void PRNT_Device_CreateBlockingStream(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo, + FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_PRINTER_DEVICE_C) + #if defined(FDEV_SETUP_STREAM) + static int PRNT_Device_putchar(char c, + FILE* Stream) ATTR_NON_NULL_PTR_ARG(2); + static int PRNT_Device_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1); + static int PRNT_Device_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1); + #endif + + void PRNT_Device_Event_Stub(void) ATTR_CONST; + + void EVENT_PRNT_Device_SoftReset(USB_ClassInfo_PRNT_Device_t* const PRNTInterfaceInfo) + ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(PRNT_Device_Event_Stub); + + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + |