diff options
author | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
commit | 60b30c036397cb5627fa374bb930794b225daa29 (patch) | |
tree | e156c2d6b27f01db6985f2cc560c9c345d48fdac /Projects/LEDNotifier/LEDNotifier.txt | |
download | qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.gz qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.xz |
Squashed 'lib/lufa/' content from commit 385d40300
git-subtree-dir: lib/lufa
git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b
Diffstat (limited to 'Projects/LEDNotifier/LEDNotifier.txt')
-rw-r--r-- | Projects/LEDNotifier/LEDNotifier.txt | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/Projects/LEDNotifier/LEDNotifier.txt b/Projects/LEDNotifier/LEDNotifier.txt new file mode 100644 index 000000000..53728f448 --- /dev/null +++ b/Projects/LEDNotifier/LEDNotifier.txt @@ -0,0 +1,63 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage USB LED Notifier Project + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li AT90USB646 + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Abstract Control Model (ACM)</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF CDC Class Standard</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any + * USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the + * host on a CDC virtual serial port. When new commands are received, it updates the board LEDs. + * + * This can be controlled with any host application that can write to the virtual serial port, allowing it to become + * a visual notification system for any number of custom host applications, such as a new unread email notifier. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td> + * None + * </td> + * </tr> + * </table> + */ + |