diff options
author | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 17:55:23 +0200 |
commit | 60b30c036397cb5627fa374bb930794b225daa29 (patch) | |
tree | e156c2d6b27f01db6985f2cc560c9c345d48fdac /Projects/XPLAINBridge/XPLAINBridge.txt | |
download | qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.gz qmk_firmware-60b30c036397cb5627fa374bb930794b225daa29.tar.xz |
Squashed 'lib/lufa/' content from commit 385d40300
git-subtree-dir: lib/lufa
git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b
Diffstat (limited to 'Projects/XPLAINBridge/XPLAINBridge.txt')
-rw-r--r-- | Projects/XPLAINBridge/XPLAINBridge.txt | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt new file mode 100644 index 000000000..0cf59a67d --- /dev/null +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -0,0 +1,89 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage XPLAIN UART Bridge/PDI Programmer Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li AT90USB1287 + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>1) Device</td> + * <td>2) Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>1) Communications Device Class (CDC)</td> + * <td>2) Vendor Specific Class</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>1) Abstract Control Model (ACM)</td> + * <td>2) N/A</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>1) USBIF CDC Class Standard</td> + * <td>2) Atmel AVRISP MKII Protocol Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>1) Full Speed Mode</td> + * <td>2) Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial + * converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA. + * This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller. + * + * When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device + * will enumerate as a regular COM port on the host, which can then be opened and data exchanged between the XMEGA and Host as if + * the XMEGA was connected directly to the host's serial port. If the pin is pulled low by shorting it to GND (pin 10), the device + * will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by AVRStudio or other compatible software + * such as avrdude by connecting to the board as if it was an Atmel AVRISP-MKII programmer. + * + * After running this project in serial bridge mode for the first time on a new computer, you will need to supply the .INF file + * located in this project project's directory as the device's driver when running under Windows. This will enable Windows to use + * its inbuilt CDC virtual serial drivers, negating the need for custom drivers for the device. Other Operating Systems should + * automatically use their own inbuilt CDC-ACM drivers. + * + * In serial bridge mode, the UART baud rate can be altered through the host terminal software to select a new baud rate - the default + * baud is 9600. Note that parity, data bits and stop bits are fixed at none, eight and one respectively can cannot be altered. Changes + * to the connection's parity, data bits or stop bits are ignored by the firmware. As the serial link between the controllers on the + * XPLAIN is software emulated by the USB AVR, not all baud rates will work correctly. + * + * This project relies on files from the LUFA AVRISP-MKII project for compilation. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>FIRMWARE_VERSION_MINOR</td> + * <td>AppConfig.h</td> + * <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible + * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td> + * </tr> + * </table> + */ + |