Renames keyboard folder to keyboards, adds couple of tmk's fixes (#432)

* fixes from tmk's repo

* rename keyboard to keyboards

7 files changed, 40 insertions, 40 deletions

diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md
index 5636c65ea..c9a760107 100644
--- a/doc/BUILD_GUIDE.md
+++ b/doc/BUILD_GUIDE.md
@@ -40,20 +40,20 @@ If you have any problems building the firmware, you can try using a tool called
 ## Verify Your Installation
 1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
 2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
-3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `README.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboard/`. For example, if you're building for a Planck, run `cd keyboard/planck`.
+3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `README.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`.
 4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.
 
 ## Customizing, Building, and Deploying Your Firmware
 
 ### The Make command
 
-The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboard/<keyboard>/`), or your keymap folder (`/keyboard/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
+The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboards/<keyboard>/`), or your keymap folder (`/keyboards/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
 
 By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Your .hex file will also be copied into your keymap folder as `compiled.hex`, which isn't ignored by git - this is included in case first-time users are having trouble compiling, and just want to flash a layout via `make dfu-no-build` or using the Teensy loader.
 
 * The "root" (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc.
-* The "keyboard" folder is any keyboard project's folder, like `/keyboard/planck`.
-* The "keymap" folder is any keymap's folder, like `/keyboard/planck/keymaps/default`.
+* The "keyboard" folder is any keyboard project's folder, like `/keyboards/planck`.
+* The "keymap" folder is any keymap's folder, like `/keyboards/planck/keymaps/default`.
 
 Below is a list of the useful `make` commands in QMK:
 
@@ -80,8 +80,8 @@ Other, less useful functionality:
 There are 3 different `make` and `Makefile` locations:
 
 * root (`/`)
-* keyboard (`/keyboard/<keyboard>/`)
-* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
+* keyboard (`/keyboards/<keyboard>/`)
+* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
 
 The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **It is required if you want to run `make` in the keymap folder.**
 
@@ -89,8 +89,8 @@ The root contains the code used to automatically figure out which keymap or keym
 
 There are 2 `config.h` locations:
 
-* keyboard (`/keyboard/<keyboard>/`)
-* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
+* keyboard (`/keyboards/<keyboard>/`)
+* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
 
 The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
 
diff --git a/doc/CYGWIN_GUIDE.md b/doc/CYGWIN_GUIDE.md
index ac13e745d..05e7a55f7 100755
--- a/doc/CYGWIN_GUIDE.md
+++ b/doc/CYGWIN_GUIDE.md
@@ -235,7 +235,7 @@ If you did everything else right. This part should be a snap! Grab the latest so
 ```
 $ cd ~/src
 $ git clone https://github.com/jackhumbert/qmk_firmware.git
-$ cd qmk_firmware/keyboard/planck
+$ cd qmk_firmware/keyboards/planck
 $ make
 ```
 
diff --git a/doc/HAND_WIRE.md b/doc/HAND_WIRE.md
index 073dbf447..bb3683cb9 100644
--- a/doc/HAND_WIRE.md
+++ b/doc/HAND_WIRE.md
@@ -185,13 +185,13 @@ From here, you should have a working keyboard with the correct firmware. Before
 
 To start out, download [the firmware](https://github.com/jackhumbert/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/).
 
-The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboard/` folder:
+The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder:
 
     util/new_project.sh <project_name>
 
-You'll want to navigate to the `keyboard/<project_name>/` folder by typing, like the print-out from the script specifies:
+You'll want to navigate to the `keyboards/<project_name>/` folder by typing, like the print-out from the script specifies:
 
-    cd keyboard/<project_name>
+    cd keyboards/<project_name>
 
 #### config.h
 
@@ -286,7 +286,7 @@ After you've written out your entire keymap, you're ready to get the firmware co
 
 Once everything is installed, running `make` in the terminal should get you some output, and eventually a `<project_name>.hex` file in that folder. If you're having trouble with this step, see the end of the guide for the trouble-shooting section.
 
-Once you have your `<project_name>.hex` file, open up the Teensy loader application, and click the file icon. From here, navigate to your `QMK/keyboard/<project_name>/` folder, and select the `<project_name>.hex` file. Plug in your keyboard and press the button on the Teensy - you should see the LED on the device turn off once you do. The Teensy Loader app will change a little, and the buttons should be clickable - click the download button (down arrow), and then the reset button (right arrow), and your keyboard should be ready to go!
+Once you have your `<project_name>.hex` file, open up the Teensy loader application, and click the file icon. From here, navigate to your `QMK/keyboards/<project_name>/` folder, and select the `<project_name>.hex` file. Plug in your keyboard and press the button on the Teensy - you should see the LED on the device turn off once you do. The Teensy Loader app will change a little, and the buttons should be clickable - click the download button (down arrow), and then the reset button (right arrow), and your keyboard should be ready to go!
 
 #### Testing your firmware
 
diff --git a/doc/PCB_GUIDE.md b/doc/PCB_GUIDE.md
index b36d8fb64..3fad41dfb 100644
--- a/doc/PCB_GUIDE.md
+++ b/doc/PCB_GUIDE.md
@@ -33,7 +33,7 @@ Note that, since it will be directly accessing USB hardware, the
 
 ## Verify Your Installation
 1. Clone the following repository: https://github.com/jackhumbert/qmk_firmware
-2. Open a Terminal and `cd` into `qmk_firmware/keyboard/planck`
+2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck`
 3. Run `make`. This should output a lot of information about the build process.
 
 ## Using the built-in functions
@@ -73,7 +73,7 @@ If you see this
     make (e=2): The system cannot find the file specified.
     make: *** [dfu] Error 2
 
-when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to qmk_firmware/keyboard/planck.
+when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to qmk_firmware/keyboards/planck.
 
 
 ## Quantum MK Firmware
diff --git a/doc/TMK_README.md b/doc/TMK_README.md
index 36ef84ac6..150b4f93b 100644
--- a/doc/TMK_README.md
+++ b/doc/TMK_README.md
@@ -29,12 +29,12 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 ## Main projects
 
 ### OLKB products
-* [planck](keyboard/planck/)                - [Planck] Ortholinear 40% keyboard
-* [preonic](keyboard/preonic/)              - [Preonic] Ortholinear 50% keyboard
-* [atomic](keyboard/atomic/)                - [Atomic] Ortholinear 60% keyboard
+* [planck](keyboards/planck/)                - [Planck] Ortholinear 40% keyboard
+* [preonic](keyboards/preonic/)              - [Preonic] Ortholinear 50% keyboard
+* [atomic](keyboards/atomic/)                - [Atomic] Ortholinear 60% keyboard
 
 ### Ergodox EZ
-* [ergodox_ez](keyboard/ergodox_ez)         - [Ergodox_EZ] Assembled split keyboard
+* [ergodox_ez](keyboards/ergodox_ez)         - [Ergodox_EZ] Assembled split keyboard
 
 ## Other projects
 
@@ -52,20 +52,20 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 * [ibm4704_usb](converter/ibm4704_usb)      - [IBM 4704 keyboard Converter][GH_ibm4704]
 
 ### keyboard
-* [hhkb](keyboard/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] hasu's main board
-* [gh60](keyboard/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] hasu's second board
-* [hbkb](keyboard/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
-* [hid_liber](keyboard/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
-* [phantom](keyboard/phantom/)              - [Phantom] keyboard (by Tranquilite)
-* [IIgs_Standard](keyboard/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
-* [macway](keyboard/macway/)                - [Compact keyboard mod][GH_macway] [retired]
-* [KMAC](keyboard/kmac/)                    - Korean custom keyboard
-* [Lightsaber](keyboard/lightsaber/)        - Korean custom keyboard
-* [Infinity](keyboard/infinity/)            - Massdrop [Infinity keyboard][Infinity]
-* [NerD](keyboard/nerd/)                    - Korean custom keyboard
-* [KittenPaw](keyboard/kitten_paw)          - Custom Majestouch controller
-* [Lightpad](keyboard/lightpad)             - Korean custom keypad
-* [ghost_squid](keyboard/ghost_squid/)      - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
+* [hhkb](keyboards/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] hasu's main board
+* [gh60](keyboards/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] hasu's second board
+* [hbkb](keyboards/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
+* [hid_liber](keyboards/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
+* [phantom](keyboards/phantom/)              - [Phantom] keyboard (by Tranquilite)
+* [IIgs_Standard](keyboards/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
+* [macway](keyboards/macway/)                - [Compact keyboard mod][GH_macway] [retired]
+* [KMAC](keyboards/kmac/)                    - Korean custom keyboard
+* [Lightsaber](keyboards/lightsaber/)        - Korean custom keyboard
+* [Infinity](keyboards/infinity/)            - Massdrop [Infinity keyboard][Infinity]
+* [NerD](keyboards/nerd/)                    - Korean custom keyboard
+* [KittenPaw](keyboards/kitten_paw)          - Custom Majestouch controller
+* [Lightpad](keyboards/lightpad)             - Korean custom keypad
+* [ghost_squid](keyboards/ghost_squid/)      - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
 
 ### Extenal projects using tmk_keyboard
 * [ErgoDox_cub-uanic][cub-uanic]            - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
@@ -92,7 +92,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 [IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
 [Infinity]:     https://www.massdrop.com/buy/infinity-keyboard-kit
 [ghost_squid]:  http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
-[cmxt]:         http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
+[cmxt]:         http://gaming.coolermaster.com/en/products/keyboard/quickfirext/
 [ergodox_org]:  http://ergodox.org/
 [cub-uanic]:    https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
 [mcdox]:        https://github.com/DavidMcEwan/mcdox
@@ -113,7 +113,7 @@ Third party libraries like LUFA, PJRC and V-USB have their own license respectiv
 
 Build Firmware and Program Controller
 -------------------------------------
-See [doc/build.md](tmk_core/doc/build.md), or the README in the particular keyboard/* folder.
+See [doc/build.md](tmk_core/doc/build.md), or the README in the particular keyboards/* folder.
 
 
 
@@ -226,7 +226,7 @@ Files and Directories
 -------------------
 ### Top
 * tmk_core/     - core library
-* keyboard/     - keyboard projects
+* keyboards/     - keyboard projects
 * converter/    - protocol converter projects
 * doc/          - documents
 
diff --git a/doc/VAGRANT_GUIDE.md b/doc/VAGRANT_GUIDE.md
index f7419ccda..72223e804 100644
--- a/doc/VAGRANT_GUIDE.md
+++ b/doc/VAGRANT_GUIDE.md
@@ -12,7 +12,7 @@ Other than having Vagrant and Virtualbox installed and possibly a restart of you
 
 Build Firmware and Program Controller
 -------------------------------------
-See [/doc/BUIDE_GUIDE.md](/doc/BUILD_GUIDE.md), or the README in the particular keyboard/* folder.
+See [/doc/BUIDE_GUIDE.md](/doc/BUILD_GUIDE.md), or the README in the particular keyboards/* folder.
 
 Change your keymap
 ------------------
@@ -20,7 +20,7 @@ See [/doc/keymap.md](/doc/keymap.md).
 
 ## Flashing the firmware
 
-The "easy" way to flash the firmware is using a tool from your host OS like the Teensy programming app. [ErgoDox EZ](/keyboard/ergodox_ez/readme.md) gives a great example.
+The "easy" way to flash the firmware is using a tool from your host OS like the Teensy programming app. [ErgoDox EZ](/keyboards/ergodox_ez/readme.md) gives a great example.
 
 If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
 	
\ No newline at end of file
diff --git a/doc/keymap.md b/doc/keymap.md
index 4d42fbe5c..d1985e567 100644
--- a/doc/keymap.md
+++ b/doc/keymap.md
@@ -378,7 +378,7 @@ Default Layer also has bitwise operations, they are executed when key is release
 #### 2.3.2 Examples
 
 ***TODO: sample implementation***
-See `keyboard/hhkb/keymap.c` for sample.
+See `keyboards/hhkb/keymap.c` for sample.
 
 
 
@@ -424,7 +424,7 @@ This C function is called every time key is operated, argument `id` selects acti
     } key_t;
 
 ***TODO: sample implementation***
-See `keyboard/hhkb/keymap.c` for sample.
+See `keyboards/hhkb/keymap.c` for sample.