ISSI31FL3733 driver (#3679)

* ISSI31FL3733 driver

- Addapted IS31 driver for the above driver

* fix my branch

* ISSI31FL3733 driver

- Inclusion of above ISSI led driver

* IS31fl3733 driver

- Added correct function for control registers

* Finalized support for ISSI31fl3733 led driver

- Finalized and tested driver.
- Modified i2c_master for arm due to declaration mistake.
- Fixed spaces/tabs in quantum.h file.
- Fixed spaces/tabs in common_features.mk file.
- Removed unnecessary includes from rgb_matrix.c file.
- Added local definitions for MIN and MAX macros in rgb_matrix.c file.
- Adjusted chevron effect.
- Added necessary define (RGB_3733_MATRIX_ENABLE) for makefile.
- Added necessary C define (ISSI3733) to aid with inclusion of the correct header file.
- Added documentation for the new driver.

* Driver structure update

- Changed rule includes to be more condensed (RGB_MATRIX_ENABLE = IS31FL3731) and (RGB_MATRIX_ENABLE = IS31FL3733)
- Updated documentation
- Reverted to the use of differently named functions for each driver and selecting the needed ones within rgb_matrix.c

* ISSI Drivers refractoring

- Moved issi drivers in a dedicated folder
- Updated documentation

* I2C library fix

I released the special pins incorrectly before. It is now fixed.

2 files changed, 9 insertions, 8 deletions

diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 2fdd9f65e..2a7badd35 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -15,12 +15,14 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/* This library follows the convention of the AVR i2c_master library.
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
  * As a result addresses are expected to be already shifted (addr << 1).
  * I2CD1 is the default driver which corresponds to pins B6 and B7. This
  * can be changed.
  * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
  */
 
 #include "i2c_master.h"
@@ -41,7 +43,7 @@ static const I2CConfig i2cconfig = {
 
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
@@ -82,12 +84,12 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l
   {
     complete_packet[i+1] = data[i];
   }
-  complete_packet[0] = regaddr
+  complete_packet[0] = regaddr;
 
   return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
 }
 
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;
   i2cStart(&I2C_DRIVER, &i2cconfig);
@@ -97,7 +99,6 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t le
 // This is usually not needed. It releases the driver to allow pins to become GPIO again.
 uint8_t i2c_stop(uint16_t timeout)
 {
-  i2c_address = address;
   i2cStop(&I2C_DRIVER);
   return 0;
 }
diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h
index 9d51245be..591fa7f77 100644
--- a/drivers/arm/i2c_master.h
+++ b/drivers/arm/i2c_master.h
@@ -35,5 +35,5 @@ uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_stop(uint16_t timeout);