diff options
| author | tmk <nobody@nowhere> | 2012-06-10 16:50:47 +0200 |
|---|---|---|
| committer | tmk <nobody@nowhere> | 2012-06-11 03:51:46 +0200 |
| commit | 81706d1130fdc3c0d6d110f4d8665c47ffd7fb59 (patch) | |
| tree | 6b10864a310f611187e1b61102da7da1db1d2e29 /keyboard/hbkb/Makefile | |
| parent | afb08462085132acf7a1962522952f7dbf064519 (diff) | |
| download | qmk_firmware-81706d1130fdc3c0d6d110f4d8665c47ffd7fb59.tar.gz qmk_firmware-81706d1130fdc3c0d6d110f4d8665c47ffd7fb59.tar.xz | |
Moved protocol files; news and x68k.
Renamed sony_usb to news_usb
Renamed hbk to hbkb
Diffstat (limited to 'keyboard/hbkb/Makefile')
| -rw-r--r-- | keyboard/hbkb/Makefile | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile new file mode 100644 index 000000000..26be322e0 --- /dev/null +++ b/keyboard/hbkb/Makefile @@ -0,0 +1,56 @@ +# Target file name (without extension). +TARGET = hbk + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = main.c \ + keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +EXTRAKEY_ENABLE = yes # Audio control and System control +#NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex +PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \ + /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \ + /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start + + + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk |