Rename to hid_liber.

6 files changed, 697 insertions, 0 deletions

diff --git a/keyboard/hid_liber/Makefile.lufa b/keyboard/hid_liber/Makefile.lufa
new file mode 100644
index 000000000..1f365da11
--- /dev/null
+++ b/keyboard/hid_liber/Makefile.lufa
@@ -0,0 +1,120 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC +=	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hid_liber/Makefile.pjrc b/keyboard/hid_liber/Makefile.pjrc
new file mode 100644
index 000000000..ecc236e3d
--- /dev/null
+++ b/keyboard/hid_liber/Makefile.pjrc
@@ -0,0 +1,95 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hid_liber/config.h b/keyboard/hid_liber/config.h
new file mode 100644
index 000000000..558a8cdd5
--- /dev/null
+++ b/keyboard/hid_liber/config.h
@@ -0,0 +1,56 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xB919
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         HID Leberation
+
+
+/* message strings */
+#define DESCRIPTION     t.m.k. keyboard firmware for HID Liberation
+
+
+/* matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    5
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+// TODO: configurable
+#define DEBUG_LED 0
+#define DEBUG_LED_CONFIG
+#define DEBUG_LED_ON
+#define DEBUG_LED_OFF
+
+#endif
diff --git a/keyboard/hid_liber/keymap.c b/keyboard/hid_liber/keymap.c
new file mode 100644
index 000000000..3d3da0610
--- /dev/null
+++ b/keyboard/hid_liber/keymap.c
@@ -0,0 +1,159 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for Macway mod
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+/* 
+ * Tenkeyless keyboard:
+ * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---'   `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------.
+ * |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
+ * |-----------------------------------------------------------| |-----------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
+ * |-----------------------------------------------------------| `-----------'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |              
+ * |-----------------------------------------------------------|     ,---.    
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |    
+ * |-----------------------------------------------------------| ,-----------.
+ * |Ctl|Gui|Alt|          Space                |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
+ * `-----------------------------------------------------------' `-----------'
+ *
+ * TODO: You should define follwing macro properly. It won't be compiled until done.
+ *
+ * Keymap array sapce has 18*8 slot, row is designated with A-Q and col with 0-7.
+ * In this macro KA0 means key at row:A/col:0, KR7 means key at rowR/col7.
+ * Empty slot of keymap should has KC_NO.For example row:B/col:0 has no key
+ * so you must define KC_NO in this slot.(from hid_liber/ansi_iso_jis.c)
+ * Esc key locates at row:A/col:1 so fist argument of macro should say KA1.
+ * Right arrow key locates at row:Q/col:2 so last argument of macro should say KQ2.
+ *
+ * NOTE: Except above examples, the rest of macro definition is garbage just for place holder.
+ */
+#define KEYMAP( \
+    KA1,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE, \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,              \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KQ2  \
+) { \
+    { KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7 }, \
+    { KC_NO,    KC_##KB1, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_##KB7 }, \
+    { KC_##KC0, KC_##KC1, KC_##KC2, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7 }, \
+    { KC_##KD0, KC_##KD1, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_##KD7 }, \
+    { KC_##KE0, KC_##KE1, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_##KE7 }, \
+    { KC_##KF0, KC_##KF1, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_##KF7 }, \
+    { KC_##KG0, KC_##KG1, KC_##KG2, KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7 }, \
+    { KC_##KH0, KC_##KH1, KC_##KH2, KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7 }, \
+    { KC_##KI0, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7 }, \
+    { KC_##KJ0, KC_##KJ1, KC_##KJ2, KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7 }, \
+    { KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7 }, \
+    { KC_##KL0, KC_##KL1, KC_##KL2, KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7 }, \
+    { KC_##KM0, KC_##KM1, KC_##KM2, KC_##KM3, KC_##KM4, KC_##KM5, KC_##KM6, KC_##KM7 }, \
+    { KC_##KN0, KC_##KN1, KC_##KN2, KC_##KN3, KC_##KN4, KC_##KN5, KC_##KN6, KC_##KN7 }, \
+    { KC_##KO0, KC_##KO1, KC_##KO2, KC_##KO3, KC_##KO4, KC_##KO5, KC_##KO6, KC_##KO7 }, \
+    { KC_##KP0, KC_##KP1, KC_##KP2, KC_##KP3, KC_##KP4, KC_##KP5, KC_##KP6, KC_##KP7 }, \
+    { KC_##KQ0, KC_##KQ1, KC_##KQ2, KC_##KQ3, KC_##KQ4, KC_##KQ5, KC_##KQ6, KC_##KQ7 }, \
+    { KC_##KR0, KC_##KR1, KC_##KR2, KC_##KR3, KC_##KR4, KC_##KR5, KC_##KR6, KC_##KR7 }  \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KC_NO,          // Fn0
+    KC_NO,          // Fn1
+    KC_NO,          // Fn2
+    KC_NO,          // Fn3
+    KC_NO,          // Fn4
+    KC_NO,          // Fn5
+    KC_NO,          // Fn6
+    KC_NO           // Fn7
+};
+
+/* See common/keycode.h for short name of key symbol. */
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     * `---'   `---------------' `---------------' `---------------' `-----------'
+     * ,-----------------------------------------------------------. ,-----------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU|
+     * |-----------------------------------------------------------| |-----------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
+     * |-----------------------------------------------------------| `-----------'
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |              
+     * |-----------------------------------------------------------|     ,---.    
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |    
+     * |-----------------------------------------------------------| ,-----------.
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig|
+     * `-----------------------------------------------------------' `-----------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                     
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,       
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t index)
+{
+    return pgm_read_byte(&fn_layer[index]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t index)
+{
+    return pgm_read_byte(&fn_keycode[index]);
+}
diff --git a/keyboard/hid_liber/led.c b/keyboard/hid_liber/led.c
new file mode 100644
index 000000000..1374f74c9
--- /dev/null
+++ b/keyboard/hid_liber/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+        PORTB &= ~(1<<5);
+    else
+        PORTB |= (1<<5);
+
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+        PORTB &= ~(1<<6);
+    else
+        PORTB |= (1<<6);
+}
diff --git a/keyboard/hid_liber/matrix.c b/keyboard/hid_liber/matrix.c
new file mode 100644
index 000000000..975ff9aac
--- /dev/null
+++ b/keyboard/hid_liber/matrix.c
@@ -0,0 +1,233 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// bit array of key state(1:on, 0:off)
+static matrix_row_t *matrix;
+static matrix_row_t *matrix_debounced;
+static matrix_row_t _matrix0[MATRIX_ROWS];
+static matrix_row_t _matrix1[MATRIX_ROWS];
+
+
+#define NROW 18
+#define NCOL 8
+#define _DDRA (uint8_t *const)&DDRA
+#define _DDRB (uint8_t *const)&DDRB
+#define _DDRC (uint8_t *const)&DDRC
+#define _DDRD (uint8_t *const)&DDRD
+#define _DDRE (uint8_t *const)&DDRE
+#define _DDRF (uint8_t *const)&DDRF
+
+#define _PINA (uint8_t *const)&PINA
+#define _PINB (uint8_t *const)&PINB
+#define _PINC (uint8_t *const)&PINC
+#define _PIND (uint8_t *const)&PIND
+#define _PINE (uint8_t *const)&PINE
+#define _PINF (uint8_t *const)&PINF
+
+#define _PORTA (uint8_t *const)&PORTA
+#define _PORTB (uint8_t *const)&PORTB
+#define _PORTC (uint8_t *const)&PORTC
+#define _PORTD (uint8_t *const)&PORTD
+#define _PORTE (uint8_t *const)&PORTE
+#define _PORTF (uint8_t *const)&PORTF
+
+#define _BIT0 0x01
+#define _BIT1 0x02
+#define _BIT2 0x04
+#define _BIT3 0x08
+#define _BIT4 0x10
+#define _BIT5 0x20
+#define _BIT6 0x40
+#define _BIT7 0x80
+
+/* Specifies the ports and pin numbers for the rows */
+static
+uint8_t *const  row_ddr[NROW] = {                                 _DDRB,                  _DDRB,
+				                                                  _DDRC,  _DDRC,
+				  _DDRD,  _DDRD,  _DDRD,  _DDRD,  _DDRD,  _DDRD,  _DDRD,  _DDRD,
+				  _DDRF,  _DDRF,                  _DDRF,  _DDRF,  _DDRF,  _DDRF};
+
+static
+uint8_t *const row_port[NROW] = {                                _PORTB,                 _PORTB,
+				 _PORTC, _PORTC,
+				 _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD,
+				 _PORTF, _PORTF,                 _PORTF, _PORTF, _PORTF, _PORTF};
+
+static
+uint8_t *const  row_pin[NROW] = {                                 _PINB,                  _PINB,
+				  _PINC,  _PINC,
+				  _PIND,  _PIND,  _PIND,  _PIND,  _PIND,  _PIND,  _PIND,  _PIND,
+				  _PINF,  _PINF,                  _PINF,  _PINF,  _PINF,  _PINF};
+
+static
+const uint8_t   row_bit[NROW] = {                                 _BIT4,                  _BIT7,
+				                                                  _BIT6,  _BIT7,
+				  _BIT0,  _BIT1,  _BIT2,  _BIT3,  _BIT4,  _BIT5,  _BIT6,  _BIT7,
+				  _BIT0,  _BIT1,                  _BIT4,  _BIT5,  _BIT6,  _BIT7};
+
+static
+const uint8_t mask = 0x0E;
+
+/* Specifies the ports and pin numbers for the columns */
+static
+const uint8_t   col_bit[NCOL] = {  0x00,   0x02,   0x04,   0x06,   0x08,   0x0A,   0x0C,   0x0E};
+
+static
+inline void pull_column(int col) {
+  PORTB = col_bit[col] | (PORTB & ~mask);
+}
+
+static
+inline void release_column(int col) {
+}
+
+/* PORTB is set as input with pull-up resistors
+   PORTC,D,E,F are set to high output */
+static
+void setup_io_pins(void) {
+  uint8_t row;
+  DDRB  |=  0x0E;
+  PORTB &= ~0x0E;
+  for(row = 0; row < NROW; row++) {
+    *row_ddr[row]  &= ~row_bit[row];
+    *row_port[row] &= ~row_bit[row];
+  }
+}
+
+static
+void setup_leds(void) {
+  DDRB  |=  0x60;
+  PORTB |=  0x60;
+}
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    setup_io_pins();
+    setup_leds();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+    matrix = _matrix0;
+    matrix_debounced = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+    if (!debouncing) {
+        uint8_t *tmp = matrix_debounced;
+        matrix_debounced = matrix;
+        matrix = tmp;
+    }
+
+    for (uint8_t col = 0; col < NCOL; col++) {  // 0-7
+        pull_column(col);   // output hi on theline
+        _delay_us(1);       // without this wait it won't read stable value.
+        for (uint8_t row = 0; row < NROW; row++) {  // 0-17
+            bool prev_bit = matrix[row] & (1<<col);
+            bool curr_bit = *row_pin[row] & row_bit[row];
+            if (prev_bit != curr_bit) {
+                matrix[row] ^= (1<<col);
+                if (debouncing) {
+                    debug("bounce!: "); debug_hex(debouncing); print("\n");
+                }
+                debouncing = DEBOUNCE;
+            }
+        }
+        release_column(col);
+    }
+
+    if (debouncing) {
+        debouncing--;
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    // NOTE: no longer used
+    return true;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix_debounced[row] & (1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix_debounced[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        for (uint8_t j = 0; j < MATRIX_COLS; j++) {
+            if (matrix_is_on(i, j))
+                count++;
+        }
+    }
+    return count;
+}