summaryrefslogtreecommitdiffstats
path: root/keyboard/macway/Makefile
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2012-06-28 16:05:21 +0200
committertmk <nobody@nowhere>2012-06-28 16:05:21 +0200
commitcc68adeb5744cba9e8650bab04ff0f0a4033db9f (patch)
treee853b1e6e48cf61b7763615a7259765a2095b621 /keyboard/macway/Makefile
parent3d81d5221eac9ca9620ba9043a250dcb8371b22e (diff)
downloadqmk_firmware-cc68adeb5744cba9e8650bab04ff0f0a4033db9f.tar.gz
qmk_firmware-cc68adeb5744cba9e8650bab04ff0f0a4033db9f.tar.xz
Add protocol/lufa. LUFA supported now.
Diffstat (limited to 'keyboard/macway/Makefile')
-rw-r--r--keyboard/macway/Makefile53
1 files changed, 0 insertions, 53 deletions
diff --git a/keyboard/macway/Makefile b/keyboard/macway/Makefile
deleted file mode 100644
index afee38b12..000000000
--- a/keyboard/macway/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# Target file name (without extension).
-TARGET = macway
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk