Add Makefile.lufa to keyboard/hhkb and hbkb.

10 files changed, 314 insertions, 69 deletions

diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile
index 26be322e0..f00d036da 100644..120000
--- a/keyboard/hbkb/Makefile
+++ b/keyboard/hbkb/Makefile
@@ -1,56 +1 @@
-# Target file name (without extension).
-TARGET = hbk
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	main.c \
-	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes	# Mouse keys
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
-	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
-	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+Makefile.lufa
\ No newline at end of file
diff --git a/keyboard/hbkb/Makefile.lufa b/keyboard/hbkb/Makefile.lufa
new file mode 100644
index 000000000..c73a0ca7d
--- /dev/null
+++ b/keyboard/hbkb/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hbkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC +=	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hbkb/Makefile.pjrc b/keyboard/hbkb/Makefile.pjrc
new file mode 100644
index 000000000..159f56b44
--- /dev/null
+++ b/keyboard/hbkb/Makefile.pjrc
@@ -0,0 +1,56 @@
+# Target file name (without extension).
+TARGET = hbkb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
+	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
+	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hbkb/config.h b/keyboard/hbkb/config.h
index 5262399dc..deaabb249 100644
--- a/keyboard/hbkb/config.h
+++ b/keyboard/hbkb/config.h
@@ -24,7 +24,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0xBB00
 #define MANUFACTURER    t.m.k.
+#define DEVICE_VER      0x0100
 #define PRODUCT         Happy Buckling Keyboard
+
+
 #define DESCRIPTION     mod version of IBM Model M keyboard
 
 
diff --git a/keyboard/hhkb/Makefile.lufa b/keyboard/hhkb/Makefile.lufa
new file mode 100644
index 000000000..cdd68f40a
--- /dev/null
+++ b/keyboard/hhkb/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hhkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC +=	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = at90usb1286
+#MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
index f6d133eae..f8836a2ca 100644
--- a/keyboard/hhkb/Makefile.pjrc
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -13,12 +13,11 @@ TOP_DIR = ../..
 TARGET_DIR = .
 
 # keyboard dependent files
-SRC =	main.c \
-	keymap.c \
+SRC =   keymap.c \
 	matrix.c \
 	led.c
 
-CONFIG_H = config_pjrc.h
+CONFIG_H = config.h
 
 
 # MCU name, you MUST set this to match the board you are using
@@ -53,8 +52,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
 
 # Search Path
 VPATH = $(TARGET_DIR)
+VPATH = $(TOP_DIR)
 
 include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
 include $(TOP_DIR)/common.mk
 include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/config_pjrc.h b/keyboard/hhkb/config.h
index fffe3522c..91446466f 100644
--- a/keyboard/hhkb/config_pjrc.h
+++ b/keyboard/hhkb/config.h
@@ -21,11 +21,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* controller configuration */
 #include "controller_teensy.h"
 
+
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xCAFE
+#define PRODUCT_ID      0xCAFF
 #define DEVICE_VER      0x0101
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         HHKB mod
+
+
 #define DESCRIPTION     t.m.k. keyboard firmware for HHKB mod
 
 
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index 350066b90..79d2d9873 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -68,8 +68,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
 // key:     on: 0/off: 1
 // prev:    unknown: output previous key state(negated)?
 
-#ifdef HOST_PJRC
-// Ports for Teensy
+#if defined(__AVR_AT90USB1286__)
+// Ports for Teensy++
 // row:     PB0-2
 // col:     PB3-5,6
 // key:     PE6(pull-uped)
@@ -90,7 +90,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
 #define KEY_PREV_OFF()          (PORTE &= ~(1<<7))
 #define KEY_POWER_ON()
 #define KEY_POWER_OFF()
-#else
+
+#elif defined(__AVR_ATmega328P__)
 // Ports for V-USB
 // key:     PB0(pull-uped)
 // prev:    PB1
@@ -126,6 +127,9 @@ static bool matrix_has_ghost_in_row(uint8_t row);
     DDRC  &= ~0x0F;                     \
     PORTC &= ~0x0F;                     \
 } while (0)
+
+#else
+#   error "define code for matrix scan"
 #endif
 
 
diff --git a/keyboard/macway/Makefile.lufa b/keyboard/macway/Makefile.lufa
index 2f2b6401d..9c9388ee2 100644
--- a/keyboard/macway/Makefile.lufa
+++ b/keyboard/macway/Makefile.lufa
@@ -107,9 +107,7 @@ EXTRAKEY_ENABLE = yes	# Audio control and System control
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
-#ifndef BOOT_SIZE
-#define BOOT_SIZE 512
-#endif
+#OPT_DEFS += -DBOOT_SIZE=4096
 
 
 # Search Path
diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc
index d2fb8ff2f..ecc236e3d 100644
--- a/keyboard/macway/Makefile.pjrc
+++ b/keyboard/macway/Makefile.pjrc
@@ -48,8 +48,7 @@ TOP_DIR = ../..
 TARGET_DIR = .
 
 # keyboard dependent files
-SRC =	protocol/pjrc/main.c \
-	keymap.c \
+SRC =	keymap.c \
 	matrix.c \
 	led.c