Added files for Bantam-44

6 files changed, 332 insertions, 0 deletions

diff --git a/keyboard/Bantam44/Bantam44.c b/keyboard/Bantam44/Bantam44.c
new file mode 100644
index 000000000..cfd8730a0
--- /dev/null
+++ b/keyboard/Bantam44/Bantam44.c
@@ -0,0 +1,29 @@
+#include "Bantam44.h"
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+	// leave these blank
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+	// leave these blank
+};
+
+void * matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+};
+
+void * matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};
\ No newline at end of file
diff --git a/keyboard/Bantam44/Bantam44.h b/keyboard/Bantam44/Bantam44.h
new file mode 100644
index 000000000..0170b871d
--- /dev/null
+++ b/keyboard/Bantam44/Bantam44.h
@@ -0,0 +1,29 @@
+#ifndef BANTAM44_H
+#define BANTAM44_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include "backlight.h"
+#include <stddef.h>
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19,    K1A, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30,   K31,   K32,   K33,     K34,    K35,   K36, K37, K38  \
+) \
+{ \
+    { K00, K01, K02, K03,   K04, K05,   K06, K07,   K08, K09, K0A,   K0B   }, \
+    { K10, K11, K12, K13,   K14, K15,   K16, K17,   K18, K19, KC_NO, K2A }, \
+	{ K20, K21, K22, K23,   K24, K25,   K26, K27,   K28, K29, K2A,   K2B   }, \
+	{ K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37,   K38   }, \
+}
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif
diff --git a/keyboard/Bantam44/Makefile b/keyboard/Bantam44/Makefile
new file mode 100644
index 000000000..e7dea9f60
--- /dev/null
+++ b/keyboard/Bantam44/Makefile
@@ -0,0 +1,139 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = Bantam44
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = Bantam44.c
+
+ifdef KEYMAP
+    SRC := keymaps/$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk
+
diff --git a/keyboard/Bantam44/README.md b/keyboard/Bantam44/README.md
new file mode 100644
index 000000000..cd059a66c
--- /dev/null
+++ b/keyboard/Bantam44/README.md
@@ -0,0 +1,24 @@
+Bantam44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent README.md](/README.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboard/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file
diff --git a/keyboard/Bantam44/config.h b/keyboard/Bantam44/config.h
new file mode 100644
index 000000000..26d680704
--- /dev/null
+++ b/keyboard/Bantam44/config.h
@@ -0,0 +1,81 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bantam Keyboards
+#define PRODUCT         Bantam44
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+// Planck PCB default pin-out
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#define COLS (int []){ B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 }
+#define ROWS (int []){ F0, D6, D4, D5 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/Bantam44/keymaps/default.c b/keyboard/Bantam44/keymaps/default.c
new file mode 100644
index 000000000..17ade6241
--- /dev/null
+++ b/keyboard/Bantam44/keymaps/default.c
@@ -0,0 +1,30 @@
+#include "Bantam44.h"
+ 
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = { /* Base */
+        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   MO(1),   KC_NO,   KC_SPC,  KC_NO,   MO(2),   KC_SCLN, KC_QUOT, KC_SLSH }
+    },
+    [1] = { /* LOWER */
+        {KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
+        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_GRV,  KC_BSLS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NO,   KC_HOME, KC_PGUP, KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   KC_TRNS, KC_NO,   KC_SPC,  KC_NO,   KC_TRNS, KC_END,  KC_PGDN, KC_EXLM }
+    },
+    [2] = { /* RAISE */
+        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
+        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO,   KC_ENT  },
+        {KC_CAPS, KC_LSFT, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_NO,   KC_UP,   KC_RSFT },
+        {KC_LCTL, KC_LGUI, KC_LALT,  KC_NO,   KC_TRNS, KC_NO,   KC_SPC,  KC_NO,   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }
+    }
+};
+ 
+const uint16_t PROGMEM fn_actions[] = {
+};
+ 
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
+{
+    return MACRO_NONE;
+};
\ No newline at end of file