[Keyboard] Convert mf68_ble to keymap (#5287)

* Initial refactor of handwired bluetooth mod to keymap

* Initial refactor of handwired bluetooth mod to keymap - strip out unnecessary duplicate config, update readme

* Initial refactor of handwired bluetooth mod to keymap - reduce firmware size

* Initial refactor of handwired bluetooth mod to keymap - update readme image

10 files changed, 72 insertions, 230 deletions

diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h
index 857205c37..25252d160 100644
--- a/keyboards/40percentclub/mf68/config.h
+++ b/keyboards/40percentclub/mf68/config.h
@@ -52,6 +52,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h b/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h
new file mode 100644
index 000000000..7d96ab9e2
--- /dev/null
+++ b/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h
@@ -0,0 +1,43 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* Overrides for Feather 32u4 Bluefruit */
+
+/* USB Device descriptor parameter */
+#undef DESCRIPTION
+#define DESCRIPTION     Magicforce 68 BLE
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#undef UNUSED_PINS
+#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 }
+#define UNUSED_PINS {B5}
diff --git a/keyboards/40percentclub/mf68_ble/keymaps/default/keymap.c b/keyboards/40percentclub/mf68/keymaps/mf68_ble/keymap.c
index ae7e7297c..ae7e7297c 100644
--- a/keyboards/40percentclub/mf68_ble/keymaps/default/keymap.c
+++ b/keyboards/40percentclub/mf68/keymaps/mf68_ble/keymap.c
diff --git a/keyboards/40percentclub/mf68_ble/readme.md b/keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md
index 0e0f4b90d..e590ae3e6 100644
--- a/keyboards/40percentclub/mf68_ble/readme.md
+++ b/keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md
@@ -1,6 +1,6 @@
 # mf68_ble
 
-![mf68_ble](https://3.bp.blogspot.com/-0YCA3Hx2Rq0/WD3U3GWhyvI/AAAAAAAB_Uo/RWTeyCPblGcxDrDwT9WL9ck2ZRuR26DgACLcB/s640/IMG_20161129_063741.jpg)
+![mf68_ble](https://i.imgur.com/zuTyy7k.jpg)
 ===
 
 Magicforce 68 with [replacement PCB](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) designed by [di0ib](https://github.com/di0ib).
@@ -24,6 +24,6 @@ Below is how you wire the Feather to PCB
 
 Make example for this keyboard (after setting up your build environment):  
 
-    make 40percentclub/mf68_ble:default
+    make 40percentclub/mf68:mf68_ble
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/40percentclub/mf68_ble/rules.mk b/keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk
index 2ca811833..2509d0bf4 100644
--- a/keyboards/40percentclub/mf68_ble/rules.mk
+++ b/keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk
@@ -1,3 +1,4 @@
+# Overrides for Feather 32u4 Bluefruit
 # MCU name
 MCU = atmega32u4
 
@@ -61,19 +62,5 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-
 BLUETOOTH = AdafruitBLE
+BACKLIGHT_ENABLE = no
diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk
index 38c9f517b..27642d860 100644
--- a/keyboards/40percentclub/mf68/rules.mk
+++ b/keyboards/40percentclub/mf68/rules.mk
@@ -63,13 +63,14 @@ BOOTLOADER = caterina
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/40percentclub/mf68_ble/config.h b/keyboards/40percentclub/mf68_ble/config.h
deleted file mode 100644
index 3d9bb360b..000000000
--- a/keyboards/40percentclub/mf68_ble/config.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
-#define PRODUCT_ID      0x0510
-#define DEVICE_VER      0x0101
-#define MANUFACTURER    di0ib
-#define PRODUCT         MF68
-#define DESCRIPTION     Magicforce 68 BLE
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 9
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 }
-#define UNUSED_PINS {B5}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-/*
-#define BACKLIGHT_PIN B5
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-*/
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/40percentclub/mf68_ble/info.json b/keyboards/40percentclub/mf68_ble/info.json
deleted file mode 100644
index 4cd9b2c83..000000000
--- a/keyboards/40percentclub/mf68_ble/info.json
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "MF68 BLE",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 17.25,
-  "height": 5,
-  "layouts": {
-      "LAYOUT_68_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
-      }
-  }
-}
diff --git a/keyboards/40percentclub/mf68_ble/mf68_ble.c b/keyboards/40percentclub/mf68_ble/mf68_ble.c
deleted file mode 100644
index 95f8592f8..000000000
--- a/keyboards/40percentclub/mf68_ble/mf68_ble.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "mf68_ble.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
diff --git a/keyboards/40percentclub/mf68_ble/mf68_ble.h b/keyboards/40percentclub/mf68_ble/mf68_ble.h
deleted file mode 100644
index a34f9cde8..000000000
--- a/keyboards/40percentclub/mf68_ble/mf68_ble.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_68_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
-    { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
-    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
-    { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \
-    { K70, K71, K72, K73, K74 } \
-}
-
-#define LAYOUT_kc( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) LAYOUT_68_ansi( \
-    KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, \
-    KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, \
-    KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, \
-    KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, \
-    KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, \
-    KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, \
-    KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \
-    KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \
-)