included amj40 implementation of nhou7 from https://github.com/nhou7/qmk_firmware_amj40

11 files changed, 523 insertions, 0 deletions

diff --git a/keyboards/amj40/Makefile b/keyboards/amj40/Makefile
new file mode 100755
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/amj40/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/amj40/amj40.c b/keyboards/amj40/amj40.c
new file mode 100755
index 000000000..5a2376999
--- /dev/null
+++ b/keyboards/amj40/amj40.c
@@ -0,0 +1,30 @@
+#include "amj40.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/amj40/amj40.h b/keyboards/amj40/amj40.h
new file mode 100755
index 000000000..ab629cba7
--- /dev/null
+++ b/keyboards/amj40/amj40.h
@@ -0,0 +1,38 @@
+#ifndef AMJ40_H
+#define AMJ40_H
+
+#include "quantum.h"
+
+// readability  
+#define XXX KC_NO
+
+/* AMJ40 ver2.0 layout1 配列一
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B    |
+ * |-----------------------------------------------------------|
+ * | 20     | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 |  2A | 2B |
+ * |-----------------------------------------------------------|
+ * | 30  | 31 | 32  |   34      |  35         | 39  | 3A | 3B  |
+ * `-----------------------------------------------------------'
+ */
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19,      k1b,  \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,  \
+    k30, k31, k32,      k34, k35,                k39, k3a, k3b  \
+) { \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \
+    {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \
+    {k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \
+}
+
+
+
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h
new file mode 100755
index 000000000..411011122
--- /dev/null
+++ b/keyboards/amj40/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6072
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Han Chen
+#define PRODUCT         AMJ40
+#define DESCRIPTION     qmk port of AMJ40 v2 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F4, F5, F6, F7}
+#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amj40/keymaps/default/Makefile b/keyboards/amj40/keymaps/default/Makefile
new file mode 100755
index 000000000..034e697bc
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/Makefile
@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj40/keymaps/default/build.sh b/keyboards/amj40/keymaps/default/build.sh
new file mode 100755
index 000000000..6b4b4568f
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj40/keymaps/default/keymap.c b/keyboards/amj40/keymaps/default/keymap.c
new file mode 100755
index 000000000..13b48c2ad
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/keymap.c
@@ -0,0 +1,173 @@
+
+
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "amj40.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+
+
+
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  ,  |  . | /? |
+     * |-----------------------------------------------------------|
+     * | LCtl | LGui| LAlt|  spc fn0  |  spc fn1    |fn2|RAlt|RCtl |
+     * `-----------------------------------------------------------'
+     */
+    [_QWERTY] = KEYMAP( \
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,\
+        KC_TAB,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,\
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,\
+        KC_LCTL, KC_LGUI, KC_LALT,          F(0),           F(1),        F(2), KC_RALT, KC_RCTL \
+		),
+
+    /* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |   ~  |   !   |  @  | # | $ | % | ^ | & | * | ( | ) | Bkspc|
+     * |-----------------------------------------------------------|
+     * |   F1   | F2 | F3 | F4 | F5 |  F6 | _ | + | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 |  F10  |  F11 |  F12 | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = KEYMAP( \
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \
+		_______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+		),
+	
+	/* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |Caps|    |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus|  ↑ | Ins| Del|
+     * |-----------------------------------------------------------|
+     * |      | 🔇 | ⏏ |    |  * |  / |Hone|PgUp|  ← |  → |       |
+     * |-----------------------------------------------------------|
+     * |        | 🔉 | 🔊 |    |  + |  - | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = KEYMAP( \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \
+		_______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \
+		),
+	
+	/* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |Caps|    |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus|  ↑ | Ins| Del|
+     * |-----------------------------------------------------------|
+     * |      | 🔇 | ⏏ |    |  * |  / |Hone|PgUp|  ← |  → |       |
+     * |-----------------------------------------------------------|
+     * |        | 🔉 | 🔊 |    |  + |  - | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_ADJUST] = KEYMAP( \
+        _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+		_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______, _______,  _______,  \
+		_______, _______, _______, RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD, \
+		KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \
+		),
+
+    
+
+};
+
+
+		
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+	[1]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+	[2]  = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI),
+
+};
+
+
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+   
+    return MACRO_NONE;
+};
+
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ 
+  switch (keycode) {
+    
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/amj40/keymaps/default/readme.md b/keyboards/amj40/keymaps/default/readme.md
new file mode 100755
index 000000000..2659292ae
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/readme.md
@@ -0,0 +1,11 @@
+AMJ40 Default Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers.
+* View the keymap.c file to understand they layout of the keymap.
+* Has keys to toggle both the switch LEDs and underglow LEDs.
+
diff --git a/keyboards/amj40/keymaps/default/updatemerge.sh b/keyboards/amj40/keymaps/default/updatemerge.sh
new file mode 100755
index 000000000..da5457e19
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master
diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md
new file mode 100755
index 000000000..e705f20fe
--- /dev/null
+++ b/keyboards/amj40/readme.md
@@ -0,0 +1,35 @@
+AMJ40 keyboard firmware
+======================
+DIY/Assembled compact 40% keyboard.
+
+Ported by N.Hou from the original TMK firmware.
+
+*Supports both backlight LEDs as well as RGB underglow. 
+
+*For reference, the AMJ40 uses pin D3 for underglow lighting.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/amj40
+folder. Once your dev env is setup, you'll be able to type `make` to generate
+your .hex - you can then use `make dfu` to program your PCB once you hit the
+reset button. 
+
+Depending on which keymap you would like to use, you will have to compile
+slightly differently.
+
+### Default
+To build with the default keymap, simply run `sudo make all`.
+The .hex file will appear in the root of the qmk firmware folder.
+
+
+
+
+### Original tmk firmware
+The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40).
+
+
diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk
new file mode 100755
index 000000000..18403ac32
--- /dev/null
+++ b/keyboards/amj40/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID