Merge remote-tracking branch 'upstream/master'

8 files changed, 341 insertions, 9 deletions

diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h
index 0e0393478..51162cde3 100644
--- a/keyboards/atreus/config.h
+++ b/keyboards/atreus/config.h
@@ -37,7 +37,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // COLS: Left to right, ROWS: Top to bottom
 #if defined(ATREUS_ASTAR)
 #   define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#if defined(PCBDOWN)
+#   define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+#else
 #   define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
+#endif
 #   define UNUSED_PINS
 #elif defined(ATREUS_TEENSY2)
 #   define MATRIX_ROW_PINS { D0, D1, D2, D3 }
@@ -85,4 +89,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
\ No newline at end of file
+#endif
diff --git a/keyboards/atreus/keymaps/classic/keymap.c b/keyboards/atreus/keymaps/classic/keymap.c
new file mode 100644
index 000000000..6ca0b2077
--- /dev/null
+++ b/keyboards/atreus/keymaps/classic/keymap.c
@@ -0,0 +1,48 @@
+#include "atreus.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _RS 1
+#define _LW 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QW] = { /* Qwerty */
+  {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_TRNS,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P    },
+  {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_TRNS,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN },
+  {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_LALT,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH },
+  {KC_ESC, KC_TAB, KC_LGUI,  KC_LSFT, KC_BSPC,  KC_LCTL, KC_SPC,  MO(_RS), KC_MINS, KC_QUOT, KC_ENT  }
+},
+[_RS] = { /* [> RAISE <] */
+  {KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_PGUP, KC_7,    KC_8,   KC_9, KC_ASTR},
+  {KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS, KC_PGDN, KC_4,    KC_5,   KC_6, KC_PLUS},
+  {KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_LALT, KC_AMPR, KC_1,    KC_2,   KC_3, KC_BSLS},
+  {TG(_LW), KC_INS,  KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC,  KC_TRNS, KC_DOT, KC_0, KC_EQL}
+},
+[_LW] = { /* [> LOWER <] */
+  {KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_TRNS, KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10},
+  {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11},
+  {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F12},
+  {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC,  DF(_QW), KC_TRNS, KC_TRNS, RESET}
+}};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c
index 1c4280ff5..04ad66fed 100644
--- a/keyboards/atreus/keymaps/default/keymap.c
+++ b/keyboards/atreus/keymaps/default/keymap.c
@@ -18,17 +18,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_LALT,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH },
   {KC_ESC, KC_TAB, KC_LGUI,  KC_LSFT, KC_BSPC,  KC_LCTL, KC_SPC,  MO(_RS), KC_MINS, KC_QUOT, KC_ENT  }
 },
+/*
+ *  !       @     up     {    }        ||     pgup    7     8     9    *
+ *  #     left   down  right  $        ||     pgdn    4     5     6    +
+ *  [       ]      (     )    &        ||       `     1     2     3    \
+ * lower  insert super shift bksp ctrl || alt space   fn    .     0    =
+ */
 [_RS] = { /* [> RAISE <] */
-  {KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_PGUP, KC_7,    KC_8,   KC_9, KC_ASTR},
-  {KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS, KC_PGDN, KC_4,    KC_5,   KC_6, KC_PLUS},
-  {KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_LALT, KC_AMPR, KC_1,    KC_2,   KC_3, KC_BSLS},
+  {KC_EXLM, KC_AT,   KC_UP,   KC_LCBR, KC_RCBR, KC_TRNS, KC_PGUP, KC_7,    KC_8,   KC_9, KC_ASTR},
+  {KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR,  KC_TRNS, KC_PGDN, KC_4,    KC_5,   KC_6, KC_PLUS},
+  {KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_LALT, KC_GRV,  KC_1,    KC_2,   KC_3, KC_BSLS},
   {TG(_LW), KC_INS,  KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC,  KC_TRNS, KC_DOT, KC_0, KC_EQL}
 },
+/*
+ * insert home   up  end   pgup       ||      up     F7    F8    F9   F10
+ *  del   left  down right pgdn       ||     down    F4    F5    F6   F11
+ *       volup             reset      ||             F1    F2    F3   F12
+ *       voldn  super shift bksp ctrl || alt space   L0  prtsc scroll pause
+ */
 [_LW] = { /* [> LOWER <] */
   {KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_TRNS, KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10},
   {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11},
-  {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F12},
-  {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC,  DF(_QW), KC_TRNS, KC_TRNS, RESET}
+  {KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET,   KC_LALT, KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F12},
+  {KC_TRNS, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC,  DF(_QW), KC_PSCR, KC_SLCK, KC_PAUS}
 }};
 
 const uint16_t PROGMEM fn_actions[] = {
diff --git a/keyboards/atreus/keymaps/erlandsona/config.h b/keyboards/atreus/keymaps/erlandsona/config.h
new file mode 100644
index 000000000..d9eb1903e
--- /dev/null
+++ b/keyboards/atreus/keymaps/erlandsona/config.h
@@ -0,0 +1,96 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+
+/* Make Overloaded Keys switch faster */
+#define TAPPING_TERM 150
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Technomancy
+#define PRODUCT         Atreus
+#define DESCRIPTION     q.m.k. keyboard firmware for Atreus
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#if defined(ATREUS_ASTAR)
+#   define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#if defined(PCBDOWN)
+#   define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+#else
+#   define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
+#endif
+#   define UNUSED_PINS
+#elif defined(ATREUS_TEENSY2)
+#   define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#   define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 }
+#   define UNUSED_PINS
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/atreus/keymaps/erlandsona/keymap.c b/keyboards/atreus/keymaps/erlandsona/keymap.c
new file mode 100644
index 000000000..32c8826e0
--- /dev/null
+++ b/keyboards/atreus/keymaps/erlandsona/keymap.c
@@ -0,0 +1,61 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "atreus.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define BASE 0
+#define NUMS 1
+#define MOUS 2
+
+// Some quick aliases, just to make it look pretty
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Qwerty */
+  KC_Q       , KC_W   , KC_E   , KC_R   ,  KC_T   ,                 KC_Y  ,  KC_U   , KC_I   , KC_O   , KC_P          ,
+  KC_A       , KC_S   , KC_D   , KC_F   ,  KC_G   ,                 KC_H  ,  KC_J   , KC_K   , KC_L   , KC_SCLN       ,
+  SFT_T(KC_Z), KC_X   , KC_C   , KC_V   ,  KC_B   ,                 KC_N  ,  KC_M   , KC_COMM, KC_DOT , SFT_T(KC_QUOT),
+  KC_LCTL    , KC_LALT, KC_LALT, KC_LGUI,  KC_BSPC, KC_ESC, KC_ENT, KC_SPC,  F(NUMS), KC_RALT, KC_SLSH, KC_BSLS      ),
+
+[NUMS] = KEYMAP( /* Numbers / Arrows / Symbols */
+  KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   ,                   KC_LPRN, KC_RPRN, KC_MINS, KC_EQL , KC_LBRC,
+  KC_TAB , KC_5   , KC_6   , KC_7   , KC_8   ,                   KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, KC_RBRC,
+  _______, KC_9   , KC_0   , KC_DOT , KC_COMM,                   KC_HOME, KC_PGDN, KC_PGUP, KC_END , _______,
+  _______, _______, _______, _______, KC_DEL , F(MOUS), _______, _______, _______, _______, _______, _______),
+
+[MOUS] = KEYMAP( /* Mouse and Media Keys */
+  KC_SLCK, KC_PAUSE, KC_F11 , KC_F10 , KC_F9  ,                   KC_F8  , KC_F7  , KC_F6  , KC_F5  , KC_F4,
+  KC_VOLD, KC_ACL0 , KC_ACL1, KC_ACL2, KC_VOLU,                   KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_F3,
+  KC_MUTE, KC_MPRV , KC_MPLY, KC_MNXT, KC_MUTE,                   KC_WH_R, KC_WH_U, KC_WH_D, KC_WH_L, KC_F2,
+  _______, _______ , _______, _______, _______, _______, _______, KC_BTN1, F(BASE), RESET  , KC_F12 , KC_F1)
+};
+
+
+// I prefer this layer switching strategy to the TG and MO functions.
+// so that I can get out of mouse mode just by tapping/holding my base layer FN key.
+const uint16_t PROGMEM fn_actions[] = {
+  [BASE] = ACTION_LAYER_OFF(2, 1),  // switch back to layer 0
+  [NUMS] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+  [MOUS] = ACTION_LAYER_ON(2, 1)  // switch to layer 2
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c
new file mode 100644
index 000000000..90ec6f904
--- /dev/null
+++ b/keyboards/atreus/keymaps/jeremy/keymap.c
@@ -0,0 +1,66 @@
+// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer.
+
+#include "atreus.h"
+#include "action_layer.h"
+#include "keymap_colemak.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define ALPH 0
+#define NUMS 1
+#define CURS 2
+#define SYMB 3
+#define FKEY 4
+
+// Some handy macros to keep the keymaps clean and easier to maintain
+#define KM_SAVE LGUI(CM_S)
+#define KM_CLSE LGUI(CM_W)
+#define KM_OPEN LGUI(CM_O)
+
+#define KM_COPY LGUI(KC_C)
+#define KM_CUT  LGUI(KC_X)
+#define KM_PAST LGUI(KC_V)
+#define KM_UNDO LGUI(KC_Z)
+#define KM_REDO LGUI(LSFT(KC_Z))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[ALPH] = {
+  {KC_Q,    KC_W,           KC_E,           KC_R,    KC_T,    KC_TRNS, KC_Y,    KC_U,    KC_I,           KC_O,           KC_P},
+  {KC_A,    LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F,    KC_G,    KC_TRNS, KC_H,    KC_J,    LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN},
+  {KC_Z,    KC_X,           KC_C,           KC_V,    KC_B,    KC_LALT, KC_N,    KC_M,    KC_COMM,        KC_DOT,         KC_SLSH},
+  {KC_LCTL, KC_ESC,         KC_NO,          KC_LSFT, KC_SPC,  KC_LGUI, KC_ENT,  KC_RSFT, KC_NO,          KC_ESC,         KC_RCTL}
+},
+[NUMS] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_ASTR, KC_SLSH, KC_TRNS, KC_TRNS, KC_7,    KC_8,           KC_9,           KC_SLSH},
+  {KC_TRNS, KC_TRNS,        KC_EQL,         KC_PLUS, KC_MINS, KC_TRNS, KC_LPRN, KC_4,    KC_5,           KC_6,           KC_ASTR},
+  {KC_TRNS, KC_TRNS,        KC_DOT,         KC_COMM, CM_SCLN, KC_TRNS, KC_RPRN, KC_1,    KC_2,           KC_3,           KC_MINS},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0,    KC_DOT,         KC_EQL,         KC_PLUS}
+},
+[CURS] = {
+  {KC_TRNS, KC_BSPC,        KC_UP,          KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KM_SAVE, KC_TRNS,        KM_OPEN,        KC_TRNS},
+  {KC_TRNS, KC_LEFT,        KC_DOWN,        KC_RGHT, KC_PGDN, KC_TRNS, KM_UNDO, KC_LALT, KC_TRNS,        KC_LGUI,        KC_TRNS},
+  {KC_TRNS, KC_VOLD,        KC_MUTE,        KC_VOLU, KC_MPLY, KM_COPY, KM_REDO, KM_CLSE, KC_TRNS,        KC_TRNS,        KC_TRNS},
+  {KC_TRNS, KC_TRNS,        RESET,          KC_TRNS, KC_TAB,  KM_CUT,  KM_PAST, KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS}
+},
+[SYMB] = {
+  {KC_BSLS, KC_EXLM,        KC_LABK,        KC_RABK, CM_COLN, KC_TRNS, KC_UNDS, KC_DLR,  KC_QUES,       KC_TRNS,         KC_PERC},
+  {KC_AT,   KC_AMPR,        KC_LPRN,        KC_RPRN, CM_SCLN, KC_TRNS, KC_COMM, KC_DOT,  KC_QUOT,       KC_TRNS,         KC_TILD},
+  {KC_HASH, KC_PIPE,        KC_LCBR,        KC_RCBR, KC_SLSH, KC_TRNS, KC_TRNS, KC_GRV,  KC_DQT,        KC_TRNS,         KC_CIRC},
+  {KC_TRNS, KC_TRNS,        KC_LBRC,        KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+},
+[FKEY] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9,   KC_F10,        KC_F11,          KC_F12},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5,   KC_F6,         KC_F7,           KC_F8},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1,   KC_F2,         KC_F3,           KC_F4},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+}};
+
+const uint16_t PROGMEM fn_actions[] = {};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {}
+
+  return MACRO_NONE;
+};
diff --git a/keyboards/atreus/keymaps/jeremy/readme.md b/keyboards/atreus/keymaps/jeremy/readme.md
new file mode 100644
index 000000000..df0179a8e
--- /dev/null
+++ b/keyboards/atreus/keymaps/jeremy/readme.md
@@ -0,0 +1,45 @@
+Jeremy's Atreus Key Mapping
+===========================
+
+I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling.
+
+My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015).
+
+## Main Layers
+
+1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac)
+2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5)
+3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4)
+4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973)
+5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89)
+
+## Notes
+
+### General
+
+Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching.
+
+I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory.
+
+### Symbol Layer
+
+1. I placed characters that deal with an if statement close together, such as !, & and |.
+2. All matching brace/bracket characters are together as well.
+
+### Number Layer
+
+1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could.
+2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key.
+3. Parentheses were added for typing on the calculator.
+
+### Cursor Layer
+
+1. It includes basic audio controls because they didn't really fit anywhere else
+2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard.
+3. It contains the backspace and delete keys right on top of the left and right arrows.
+4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word.
+
+### Function Layer
+
+1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row.
+2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved.
diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk
index d71f50bb2..3a00993bd 100644
--- a/keyboards/atreus/rules.mk
+++ b/keyboards/atreus/rules.mk
@@ -2,11 +2,11 @@
 
 ifdef TEENSY2
     OPT_DEFS += -DATREUS_TEENSY2
-    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
     OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
 
@@ -79,4 +79,4 @@ UNICODE_ENABLE ?= YES 		# Unicode
 USB ?= /dev/cu.usbmodem1411
 
 upload: build
-	$(ATRUES_UPLOAD_COMMAND)
\ No newline at end of file
+	$(ATREUS_UPLOAD_COMMAND)