Reorganize clueboard into a single directory (#1855)

13 files changed, 531 insertions, 0 deletions

diff --git a/keyboards/clueboard/card/cluecard.c b/keyboards/clueboard/card/cluecard.c
new file mode 100644
index 000000000..81db252d2
--- /dev/null
+++ b/keyboards/clueboard/card/cluecard.c
@@ -0,0 +1,98 @@
+#include "cluecard.h"
+#define BL_RED OCR1B
+#define BL_GREEN OCR1A
+#define BL_BLUE OCR1C
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+void backlight_init_ports(void)
+{
+	// Set B5, B6, and B7 as output
+	DDRB |= (1<<7)|(1<<6)|(1<<5);
+
+	// Setup PWM
+	ICR1 = 0xFFFF;
+	TCCR1A = 0b10101010;
+	TCCR1B = 0b00011001;
+
+	BL_RED = 0xFFFF;
+	BL_GREEN = 0xFFFF;
+	BL_BLUE = 0xFFFF;
+}
+
+void backlight_set(uint8_t level)
+{
+	// Set the RGB color
+	switch (level)
+	{
+	case 0:
+		// Off
+		BL_RED = 0xFFFF;
+		BL_GREEN = 0xFFFF;
+		BL_BLUE = 0xFFFF;
+		break;
+	case 1:
+		// Red
+		BL_RED = 0x0000;
+		BL_GREEN = 0xFFFF;
+		BL_BLUE = 0xFFFF;
+		break;
+	case 2:
+		// Green
+		BL_RED = 0xFFFF;
+		BL_GREEN = 0x0000;
+		BL_BLUE = 0xFFFF;
+		break;
+	case 3:
+		// Blue
+		BL_RED = 0xFFFF;
+		BL_GREEN = 0xFFFF;
+		BL_BLUE = 0x0000;
+		break;
+	case 4:
+		// Magenta
+		BL_RED = 0x4000;
+		BL_GREEN = 0x4000;
+		BL_BLUE = 0x4000;
+		break;
+	case 5:
+		// Purple
+		BL_RED = 0x0000;
+		BL_GREEN = 0xFFFF;
+		BL_BLUE = 0x0000;
+		break;
+	case 6:
+		// Yellow
+		BL_RED = 0x0000;
+		BL_GREEN = 0x0000;
+		BL_BLUE = 0xFFFF;
+		break;
+	default:
+		xprintf("Unknown level: %d\n", level);
+	}
+}
diff --git a/keyboards/clueboard/card/cluecard.h b/keyboards/clueboard/card/cluecard.h
new file mode 100644
index 000000000..3342a0823
--- /dev/null
+++ b/keyboards/clueboard/card/cluecard.h
@@ -0,0 +1,22 @@
+#ifndef CLUECARD_H
+#define CLUECARD_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+	k00, k01, k02, \
+	k10, k12, \
+	k20, k21, k22, \
+	k11, \
+	k30, k31, k32 \
+) { \
+	{ k00, k01, k02, }, \
+	{ k10, k11, k12, }, \
+	{ k20, k21, k22, }, \
+	{ k30, k31, k32, } \
+}
+
+#endif
diff --git a/keyboards/clueboard/card/config.h b/keyboards/clueboard/card/config.h
new file mode 100644
index 000000000..6520eb557
--- /dev/null
+++ b/keyboards/clueboard/card/config.h
@@ -0,0 +1,167 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2330
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         ATMEGA32U4 Firmware Dev Kit
+#define DESCRIPTION     A small board to help you hack on QMK.
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F5, F4, B4 }
+#define MATRIX_COL_PINS { F1, F7, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+ 
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 20
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN E6
+//#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/clueboard/card/keymaps/default/config.h b/keyboards/clueboard/card/keymaps/default/config.h
new file mode 100644
index 000000000..8893d122e
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/clueboard/card/keymaps/default/keymap.c b/keyboards/clueboard/card/keymaps/default/keymap.c
new file mode 100644
index 000000000..cd87750a8
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/default/keymap.c
@@ -0,0 +1,63 @@
+#include "cluecard.h"
+#ifdef AUDIO_ENABLE
+	#include "audio.h"
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = KEYMAP(
+		RGB_TOG,        RGB_SAI,        RGB_VAI, \
+		        RGB_HUD,        RGB_HUI,         \
+		RGB_MOD,        RGB_SAD,        RGB_VAD, \
+		BL_STEP,                                 \
+		F(0),   F(1),   F(2)                     \
+	)
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+float tone_plover[][2] = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_FUNCTION(0),
+	[1] = ACTION_FUNCTION(1),
+	[2] = ACTION_FUNCTION(2)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	if (record->event.pressed) {
+		switch (id) {
+			case 0:
+				PLAY_SONG(tone_startup);
+				break;
+			case 1:
+				PLAY_SONG(music_scale);
+				break;
+			case 2:
+				PLAY_SONG(tone_goodbye);
+				break;
+		}
+	}
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+}
diff --git a/keyboards/clueboard/card/keymaps/default/readme.md b/keyboards/clueboard/card/keymaps/default/readme.md
new file mode 100644
index 000000000..53ba90253
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for cluecard
+
+Note that this keymap has audio enabled, so the RGB mode button does not go through the different effects.  So the LEDs will still show a static light, that is configurable with the hue, staturation and brightness buttons. You can of course also turn them on and off with the on/off button.
diff --git a/keyboards/clueboard/card/keymaps/default/rules.mk b/keyboards/clueboard/card/keymaps/default/rules.mk
new file mode 100644
index 000000000..8ee841da0
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/default/rules.mk
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/config.h b/keyboards/clueboard/card/keymaps/rgb_effects/config.h
new file mode 100644
index 000000000..c6c9342c8
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/rgb_effects/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 3
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2
+
+#endif
diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c b/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c
new file mode 100644
index 000000000..74c95ce8a
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c
@@ -0,0 +1,28 @@
+#include "cluecard.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = KEYMAP(
+		RGB_TOG,        RGB_SAI,        RGB_VAI, \
+		        RGB_HUD,        RGB_HUI,         \
+		RGB_MOD,        RGB_SAD,        RGB_VAD, \
+		BL_STEP,                                 \
+		KC_NO,   KC_NO,   KC_NO                  \
+	)
+};
+
+const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {255, 170, 85};
+const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {255, 170, 85};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+}
diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/readme.md b/keyboards/clueboard/card/keymaps/rgb_effects/readme.md
new file mode 100644
index 000000000..f99dcebf0
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/rgb_effects/readme.md
@@ -0,0 +1,5 @@
+# RGB effect test keymap for cluecard
+
+This keymap is made for testing the RGB effects. Audio is disabled and the mode buttons goes through each effect. If you run HID-listen you will be able to see which effect is active. For a list of effects, check the `rgblight.c` file.
+
+The hue, saturation and brightness buttons will work depending on which effect is active.
diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk
new file mode 100644
index 000000000..00670c0cf
--- /dev/null
+++ b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/clueboard/card/readme.md b/keyboards/clueboard/card/readme.md
new file mode 100644
index 000000000..27089d465
--- /dev/null
+++ b/keyboards/clueboard/card/readme.md
@@ -0,0 +1,13 @@
+# Cluecard
+
+A simple QMK dev kit.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Cluecard 1.0
+* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clueboard/card:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/clueboard/card/rules.mk b/keyboards/clueboard/card/rules.mk
new file mode 100644
index 000000000..2117c8127
--- /dev/null
+++ b/keyboards/clueboard/card/rules.mk
@@ -0,0 +1,70 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6