Reorganize clueboard into a single directory (#1855)

13 files changed, 0 insertions, 535 deletions

diff --git a/keyboards/cluecard/cluecard.c b/keyboards/cluecard/cluecard.c
deleted file mode 100644
index 81db252d2..000000000
--- a/keyboards/cluecard/cluecard.c
+++ /dev/null
@@ -1,98 +0,0 @@
-#include "cluecard.h"
-#define BL_RED OCR1B
-#define BL_GREEN OCR1A
-#define BL_BLUE OCR1C
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
-void backlight_init_ports(void)
-{
-	// Set B5, B6, and B7 as output
-	DDRB |= (1<<7)|(1<<6)|(1<<5);
-
-	// Setup PWM
-	ICR1 = 0xFFFF;
-	TCCR1A = 0b10101010;
-	TCCR1B = 0b00011001;
-
-	BL_RED = 0xFFFF;
-	BL_GREEN = 0xFFFF;
-	BL_BLUE = 0xFFFF;
-}
-
-void backlight_set(uint8_t level)
-{
-	// Set the RGB color
-	switch (level)
-	{
-	case 0:
-		// Off
-		BL_RED = 0xFFFF;
-		BL_GREEN = 0xFFFF;
-		BL_BLUE = 0xFFFF;
-		break;
-	case 1:
-		// Red
-		BL_RED = 0x0000;
-		BL_GREEN = 0xFFFF;
-		BL_BLUE = 0xFFFF;
-		break;
-	case 2:
-		// Green
-		BL_RED = 0xFFFF;
-		BL_GREEN = 0x0000;
-		BL_BLUE = 0xFFFF;
-		break;
-	case 3:
-		// Blue
-		BL_RED = 0xFFFF;
-		BL_GREEN = 0xFFFF;
-		BL_BLUE = 0x0000;
-		break;
-	case 4:
-		// Magenta
-		BL_RED = 0x4000;
-		BL_GREEN = 0x4000;
-		BL_BLUE = 0x4000;
-		break;
-	case 5:
-		// Purple
-		BL_RED = 0x0000;
-		BL_GREEN = 0xFFFF;
-		BL_BLUE = 0x0000;
-		break;
-	case 6:
-		// Yellow
-		BL_RED = 0x0000;
-		BL_GREEN = 0x0000;
-		BL_BLUE = 0xFFFF;
-		break;
-	default:
-		xprintf("Unknown level: %d\n", level);
-	}
-}
diff --git a/keyboards/cluecard/cluecard.h b/keyboards/cluecard/cluecard.h
deleted file mode 100644
index 3342a0823..000000000
--- a/keyboards/cluecard/cluecard.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef CLUECARD_H
-#define CLUECARD_H
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-	k00, k01, k02, \
-	k10, k12, \
-	k20, k21, k22, \
-	k11, \
-	k30, k31, k32 \
-) { \
-	{ k00, k01, k02, }, \
-	{ k10, k11, k12, }, \
-	{ k20, k21, k22, }, \
-	{ k30, k31, k32, } \
-}
-
-#endif
diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h
deleted file mode 100644
index 6520eb557..000000000
--- a/keyboards/cluecard/config.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xC1ED
-#define PRODUCT_ID      0x2330
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Clueboard
-#define PRODUCT         ATMEGA32U4 Firmware Dev Kit
-#define DESCRIPTION     A small board to help you hack on QMK.
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 3
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F5, F4, B4 }
-#define MATRIX_COL_PINS { F1, F7, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
- 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 20
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/* Underlight configuration
- */
-#define RGB_DI_PIN E6
-//#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 4     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/cluecard/keymaps/default/config.h b/keyboards/cluecard/keymaps/default/config.h
deleted file mode 100644
index 8893d122e..000000000
--- a/keyboards/cluecard/keymaps/default/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
diff --git a/keyboards/cluecard/keymaps/default/keymap.c b/keyboards/cluecard/keymaps/default/keymap.c
deleted file mode 100644
index cd87750a8..000000000
--- a/keyboards/cluecard/keymaps/default/keymap.c
+++ /dev/null
@@ -1,63 +0,0 @@
-#include "cluecard.h"
-#ifdef AUDIO_ENABLE
-	#include "audio.h"
-#endif
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		RGB_TOG,        RGB_SAI,        RGB_VAI, \
-		        RGB_HUD,        RGB_HUI,         \
-		RGB_MOD,        RGB_SAD,        RGB_VAD, \
-		BL_STEP,                                 \
-		F(0),   F(1),   F(2)                     \
-	)
-};
-
-#ifdef AUDIO_ENABLE
-
-float tone_startup[][2] = SONG(STARTUP_SOUND);
-float tone_qwerty[][2] = SONG(QWERTY_SOUND);
-float tone_dvorak[][2] = SONG(DVORAK_SOUND);
-float tone_colemak[][2] = SONG(COLEMAK_SOUND);
-float tone_plover[][2] = SONG(PLOVER_SOUND);
-float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
-float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
-
-float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_FUNCTION(0),
-	[1] = ACTION_FUNCTION(1),
-	[2] = ACTION_FUNCTION(2)
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	if (record->event.pressed) {
-		switch (id) {
-			case 0:
-				PLAY_SONG(tone_startup);
-				break;
-			case 1:
-				PLAY_SONG(music_scale);
-				break;
-			case 2:
-				PLAY_SONG(tone_goodbye);
-				break;
-		}
-	}
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-}
diff --git a/keyboards/cluecard/keymaps/default/readme.md b/keyboards/cluecard/keymaps/default/readme.md
deleted file mode 100644
index fa4e8ccad..000000000
--- a/keyboards/cluecard/keymaps/default/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-# The default keymap for cluecard
-
-Note that this keymap has audio enabled, so the RGB mode button does not go through the different effects. 
-So the LEDs will still show a static light, that is configurable with the hue, staturation and brightness
-buttons. You can of course also turn them on and off with the on/off button.
diff --git a/keyboards/cluecard/keymaps/default/rules.mk b/keyboards/cluecard/keymaps/default/rules.mk
deleted file mode 100644
index 8ee841da0..000000000
--- a/keyboards/cluecard/keymaps/default/rules.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/cluecard/keymaps/rgb_effects/config.h b/keyboards/cluecard/keymaps/rgb_effects/config.h
deleted file mode 100644
index c6c9342c8..000000000
--- a/keyboards/cluecard/keymaps/rgb_effects/config.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_EFFECT_SNAKE_LENGTH 3
-#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2
-
-#endif
diff --git a/keyboards/cluecard/keymaps/rgb_effects/keymap.c b/keyboards/cluecard/keymaps/rgb_effects/keymap.c
deleted file mode 100644
index 74c95ce8a..000000000
--- a/keyboards/cluecard/keymaps/rgb_effects/keymap.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#include "cluecard.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		RGB_TOG,        RGB_SAI,        RGB_VAI, \
-		        RGB_HUD,        RGB_HUI,         \
-		RGB_MOD,        RGB_SAD,        RGB_VAD, \
-		BL_STEP,                                 \
-		KC_NO,   KC_NO,   KC_NO                  \
-	)
-};
-
-const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {255, 170, 85};
-const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {255, 170, 85};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-}
diff --git a/keyboards/cluecard/keymaps/rgb_effects/readme.md b/keyboards/cluecard/keymaps/rgb_effects/readme.md
deleted file mode 100644
index 949cac394..000000000
--- a/keyboards/cluecard/keymaps/rgb_effects/readme.md
+++ /dev/null
@@ -1,7 +0,0 @@
-# RGB effect test keymap for cluecard
-
-This keymap is made for testing the RGB effects. Audio is disabled and the mode buttons goes through each
-effect. If you run HID-listen you will be able to see which effect is active. For a list of effects, check
-the `rgblight.c` file.
-
-The hue, saturation and brightness buttons will work depending on which effect is active.
diff --git a/keyboards/cluecard/keymaps/rgb_effects/rules.mk b/keyboards/cluecard/keymaps/rgb_effects/rules.mk
deleted file mode 100644
index 00670c0cf..000000000
--- a/keyboards/cluecard/keymaps/rgb_effects/rules.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md
deleted file mode 100644
index 589eb57f3..000000000
--- a/keyboards/cluecard/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# Cluecard
-
-A simple QMK dev kit.
-
-* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
-* Hardware Supported: Cluecard 1.0
-* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make cluecard:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk
deleted file mode 100644
index 2117c8127..000000000
--- a/keyboards/cluecard/rules.mk
+++ /dev/null
@@ -1,70 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = yes           # Audio output on port C6