Add Dilly keyboard

8 files changed, 272 insertions, 0 deletions

diff --git a/keyboards/dilly/README.md b/keyboards/dilly/README.md
new file mode 100644
index 000000000..866d07ccb
--- /dev/null
+++ b/keyboards/dilly/README.md
@@ -0,0 +1,14 @@
+Dilly
+=====
+
+A 3x10 ortholinear keyboard using Kailh PG1350 Lower Profile Choc switches.
+
+Keyboard Maintainer: Keebio  
+Hardware Supported: Dilly PCB, Arduino Pro Micro  
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dilly:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/dilly/config.h b/keyboards/dilly/config.h
new file mode 100644
index 000000000..97a6e533b
--- /dev/null
+++ b/keyboards/dilly/config.h
@@ -0,0 +1,62 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x113a
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         Dilly
+#define DESCRIPTION     30 percent ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 5
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D7, E6, B4, B1, B3, B2 }
+#define MATRIX_COL_PINS { D2, D4, C6, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 10
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#endif
\ No newline at end of file
diff --git a/keyboards/dilly/dilly.c b/keyboards/dilly/dilly.c
new file mode 100644
index 000000000..89affe850
--- /dev/null
+++ b/keyboards/dilly/dilly.c
@@ -0,0 +1 @@
+#include "dilly.h"
diff --git a/keyboards/dilly/dilly.h b/keyboards/dilly/dilly.h
new file mode 100644
index 000000000..ca75704bf
--- /dev/null
+++ b/keyboards/dilly/dilly.h
@@ -0,0 +1,31 @@
+#ifndef DILLY_H
+#define DILLY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) { \
+    { A1, A2, A3, A4, A5 }, \
+    { B1, B2, B3, B4, B5 }, \
+    { C1, C2, C3, C4, C5 }, \
+    { A10, A9, A8, A7, A6 }, \
+    { B10, B9, B8, B7, B6 }, \
+    { C10, C9, C8, C7, C6 } \
+}
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) \
+    KEYMAP( \
+        KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, \
+        KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, \
+        KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10 \
+    )
+
+#endif
diff --git a/keyboards/dilly/keymaps/default/config.h b/keyboards/dilly/keymaps/default/config.h
new file mode 100644
index 000000000..7fa3bf328
--- /dev/null
+++ b/keyboards/dilly/keymaps/default/config.h
@@ -0,0 +1,6 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif
diff --git a/keyboards/dilly/keymaps/default/keymap.c b/keyboards/dilly/keymaps/default/keymap.c
new file mode 100644
index 000000000..56e1ef4c7
--- /dev/null
+++ b/keyboards/dilly/keymaps/default/keymap.c
@@ -0,0 +1,101 @@
+#include "dilly.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+#define _BASE 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
+#define _FN4 4
+#define _FN5 5
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_ZCTL MT(MOD_LCTL, KC_Z)
+#define KC_XALT MT(MOD_LALT, KC_X)
+#define KC_C_L3 LT(_FN3, KC_C)
+#define KC_V_L4 LT(_FN4, KC_V)
+#define KC_SPL2 LT(_FN2, KC_SPC)
+#define KC_BSL1 LT(_FN1, KC_BSPC)
+#define KC_B_L5 LT(_FN5, KC_B)
+#define KC_NALT MT(MOD_RALT, KC_N)
+#define KC_MCTL MT(MOD_RCTL, KC_M)
+#define KC_ENTS MT(MOD_RSFT, KC_ENT)
+
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BASE] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+      A  , S  , D  , F  , G  , H  , J  , K  , L  ,ESC ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     ZCTL,XALT,C_L3,V_L4,SPL2,BSL1,B_L5,NALT,MCTL,ENTS
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN1] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,DEL ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN2] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,
+  //|----+----+----+----+----+----+----+----+----+----|
+     F11 ,F12 ,    ,    ,    ,    ,    ,    ,    ,GRV ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN3] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,MINS,EQL ,LBRC,RBRC,BSLS,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    ,COMM,DOT ,SLSH,SCLN,QUOT,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN4] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,UNDS,PLUS,LCBR,RCBR,PIPE,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    , LT , GT ,QUES,COLN,DQUO,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,HOME,PGDN,PGUP,END 
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN5] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     RTOG,RMOD,    ,RST ,RHUI,RSAI,RVAI,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,DBUG,    ,RHUD,RSAD,RVAD,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     BL_S,    ,    ,    ,    ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  )
+
+};
diff --git a/keyboards/dilly/keymaps/default/rules.mk b/keyboards/dilly/keymaps/default/rules.mk
new file mode 100644
index 000000000..1e3cebb14
--- /dev/null
+++ b/keyboards/dilly/keymaps/default/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/dilly/rules.mk b/keyboards/dilly/rules.mk
new file mode 100644
index 000000000..9c4082da2
--- /dev/null
+++ b/keyboards/dilly/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
\ No newline at end of file