Keyboard: xealous (#3731)

* Keyboard: HandWired/XeaL60

* Updated rules.mk

* Mapping for layout was flipped

* Figured out how to re-map bad pins.

* Updated Keymap

* Enabled audio, Forced NKRO

* Added QMK_KEYS_PER_SCAN

* Removed more unnecessary files, since split_keyboards are in main QMK branch already.

* Simplified rules.mk in rev1

* Removed i2c from matrix.c

* Re-formatted to 4 spaces per tab,

* Changed note for NUMPAD

* Added I2C support back!

* Fixed keyboard mappings. Both sides work

* Moved i2c configuration from keymaps/default/config.h to config.h

* Changed SCL_CLOCK to 400000L

* Added DEBUG_MATRIX_SCAN_RATE for future optimization efforts

* Removed row2col code to clean up matrix.c

* Scan rate from 2100 -> 4200 by using Nop instead of waiting 30us between columns.

* Further optimized column reading via optimized_col_reader.

* Immediate key-recognition

* Switched back to own implementation of SPLIT_KEYBOARD. Will optimize so that slave interrupts master.

* Moved scanrate debug messages to another file.

* Made matrix_scanrate.c compile if CONSOLE_ENABLE is off. Updated to latest i2c.c

* Latest i2c uses a few bytes for lighting information

* Optimizations in i2c.h to determine buffer size.

* Disabled a whole bunch of features. TODO: Test that keyboard still works fine.

* Minimum #define NO_ACTION's with still working keyboard

* Fixed matrix not working due to offsets not being respected

* Added numlock button for keymap.

* Use I2C_KEYMAP_START offset

* Removed serial, Backlight and RGB support

* Removed need for split_flags.

* Added audio on and off for numlock.

* Renamed from xeal60 to xealous, simplified build system.

* Used more shared split_common code.

* Updated audio code.

* moved tone_qwerty and tone_numpad to config.h. Removed keymaps/default/config.h

* Added more shortcut keys in _FN layer. Increased debounce to 6ms due to fencepost error.

* DF used with incorrect argument. Custom_keycodes no longer required.

* Fixed bug in update_debounce_counters which was resulting in no debouncing!

* Removed unnecessary #include

1 files changed, 73 insertions, 0 deletions

diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk
new file mode 100644
index 000000000..717895960
--- /dev/null
+++ b/keyboards/handwired/xealous/rules.mk
@@ -0,0 +1,73 @@
+SRC += matrix_scanrate.c matrix.c 
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SPLIT_KEYBOARD = yes        # Use shared split_common code
+SUBPROJECT_rev1 = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+LAYOUTS = split60
+
+DEFAULT_FOLDER = handwired/xealous/rev1