Moving cannonkeys boards to one place, eeprom fix (#4999)

* Move boards to cannonkeys and share resources

* Share common files between cannonkey boards

* Fix ortho60 keymap

* update LED numbers

* Add RGB keys to Ortho60 and Ortho48

* Add Backlight control to default layout Ortho60 and 48

* Remove unnecessary ws2812.c SRC from rules.mk

41 files changed, 0 insertions, 4511 deletions

diff --git a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.c b/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.c
deleted file mode 100644
index 8c5a87f35..000000000
--- a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-// Value to place in RTC backup register 10 for persistent bootloader mode
-#define RTC_BOOTLOADER_FLAG 0x424C
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-   //JTAG-DP Disabled and SW-DP Enabled
-   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
-   //Set backup register DR10 to enter bootloader on reset
-   BKP->DR10 = RTC_BOOTLOADER_FLAG;
-}
diff --git a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.h b/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.h
deleted file mode 100644
index 9427adabf..000000000
--- a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOA_LED               8
-#define GPIOD_OSC_IN            0
-#define GPIOD_OSC_OUT           1
-
-/* In case your board has a "USB enable" hardware
-   controlled by a pin, define it here. (It could be just
-   a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC          10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output  (USART2 TX).
- * PA3  - Normal input      (USART2 RX).
- * PA9  - Alternate output  (USART1 TX).
- * PA10 - Normal input      (USART1 RX).
- */
-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10    - Push Pull output  (USB switch).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13    - Push Pull output  (LED).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
-   have a 1.5k resistor connected on one end to the D+ line
-   and on the other end to some pin. Or even a slightly more
-   complicated "USB enable" circuit, controlled by a pin.
-   That should go here.
-
-   However on some boards (e.g. one that I have), there's no
-   such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.mk b/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.mk
deleted file mode 100644
index 6b8b312fd..000000000
--- a/keyboards/handwired/ortho60/boards/GENERIC_STM32_F103/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/handwired/ortho60/bootloader_defs.h b/keyboards/handwired/ortho60/bootloader_defs.h
deleted file mode 100644
index 0f45203cb..000000000
--- a/keyboards/handwired/ortho60/bootloader_defs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
diff --git a/keyboards/handwired/ortho60/chconf.h b/keyboards/handwired/ortho60/chconf.h
deleted file mode 100644
index bbd9b2da6..000000000
--- a/keyboards/handwired/ortho60/chconf.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 100000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 0
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 FALSE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/ortho60/config.h b/keyboards/handwired/ortho60/config.h
deleted file mode 100644
index 7234b54af..000000000
--- a/keyboards/handwired/ortho60/config.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER QMK
-#define PRODUCT Ortho60
-#define DESCRIPTION Ortho60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 12
-
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
-#define BACKLIGHT_LEVELS 1
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/handwired/ortho60/halconf.h b/keyboards/handwired/ortho60/halconf.h
deleted file mode 100644
index 5fba285a3..000000000
--- a/keyboards/handwired/ortho60/halconf.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 TRUE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/keyboards/handwired/ortho60/hsv2rgb.c b/keyboards/handwired/ortho60/hsv2rgb.c
deleted file mode 100644
index adb7af8fa..000000000
--- a/keyboards/handwired/ortho60/hsv2rgb.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* hsv2rgb.c
- * Integer only conversion functions between HSV and RGB
- */
-
-#include "hsv2rgb.h"
-
-// TODO fix these buggy macros
-#define max(x,y) ((x>y) ? x:y)
-#define min(x,y) ((x>y) ? y:x)
-#define min3(x,y,z) (min(min(x,y),z))
-#define max3(x,y,z) (max(max(x,y),z))
-
-
-rgb_color hsv2rgb(hsv_color hsv)
-{
-  // From : http://qscribble.blogspot.fr/2008/06/integer-conversion-from-hsl-to-rgb.html
-  int h = hsv.h;
-  int s = hsv.s;
-  int v = hsv.v;
-  rgb_color rgb = {0, 0, 0};
-
-  if (v == 0)
-    return rgb;
-
-  // sextant = 0 .. 5
-  int sextant = (h*6)/256;
-  // f = 0 .. 42
-  int f = h - (sextant*256)/6;
-
-  int p = (v * (256 - s))/256;
-  int q = (v * (256*43 - s*f))/(256*43);
-  int t = (v * (256*43 - s*(43-f)))/(256*43);
-
-  // Corrige les erreurs dues aux arrondis
-  p = max(min(p, 255), 0);
-  q = max(min(q, 255), 0);
-  t = max(min(t, 255), 0);
-
-  switch(sextant){
-  case 0: rgb.r = v; rgb.g = t; rgb.b = p; break;
-  case 1: rgb.r = q; rgb.g = v; rgb.b = p; break;
-  case 2: rgb.r = p; rgb.g = v; rgb.b = t; break;
-  case 3: rgb.r = p; rgb.g = q; rgb.b = v; break;
-  case 4: rgb.r = t; rgb.g = p; rgb.b = v; break;
-  default:rgb.r = v; rgb.g = p; rgb.b = q; break;
-  }
-  return rgb;
-}
-
-
-hsv_color rgb2hsv(rgb_color rgb)
-{
-  // From : http://www.ruinelli.ch/rgb-to-hsv
-  hsv_color hsv = {0, 0, 0};
-  int min, max, delta;
-
-  min = min3(rgb.r, rgb.g, rgb.b);
-  max = max3(rgb.r, rgb.g, rgb.b);
-
-  if(max==0) {
-    hsv.h = 0;
-    hsv.s = 0;
-    hsv.v = 0;
-    return hsv;
-  }
-
-  hsv.v = max;
-  delta = max - min;
-
-  hsv.s = (delta)*255 / max;
-
-  if(rgb.r == max)
-    hsv.h = (rgb.g - rgb.b)*42/delta;        // between yellow & magenta
-  else if(rgb.g == max)
-    hsv.h = 120 + (rgb.b - rgb.r)*42/delta;    // between cyan & yellow
-  else
-    hsv.h = 240 + (rgb.r - rgb.g)*42/delta;    // between magenta & cyan
-
-  return hsv;
-}
\ No newline at end of file
diff --git a/keyboards/handwired/ortho60/hsv2rgb.h b/keyboards/handwired/ortho60/hsv2rgb.h
deleted file mode 100644
index 99566c32c..000000000
--- a/keyboards/handwired/ortho60/hsv2rgb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* hsv2rgb.h
- * Convert Hue Saturation Value to Red Green Blue
- *
- * Programme de convertion d'une information HSV en RGB
- */
-#ifndef HSV2RGB_H
-#define HSV2RGB_H
-
-typedef struct {
-  unsigned char h;
-  unsigned char s;
-  unsigned char v;
-} hsv_color;
-
-typedef struct {
-  unsigned char r;
-  unsigned char g;
-  unsigned char b;
-} rgb_color;
-
-rgb_color hsv2rgb(hsv_color hsv);
-
-#endif
\ No newline at end of file
diff --git a/keyboards/handwired/ortho60/info.json b/keyboards/handwired/ortho60/info.json
deleted file mode 100644
index b94bfc7b5..000000000
--- a/keyboards/handwired/ortho60/info.json
+++ /dev/null
@@ -1,136 +0,0 @@
-{
-  "keyboard_name": "Ortho60",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 12,
-  "height": 5,
-  "layouts": {
-    "LAYOUT_ortho_5x12": {
-      "layout": [
-        {"label":"`", "x":0, "y":0},
-        {"label":"1", "x":1, "y":0},
-        {"label":"2", "x":2, "y":0},
-        {"label":"3", "x":3, "y":0},
-        {"label":"4", "x":4, "y":0},
-        {"label":"5", "x":5, "y":0},
-        {"label":"6", "x":6, "y":0},
-        {"label":"7", "x":7, "y":0},
-        {"label":"8", "x":8, "y":0},
-        {"label":"9", "x":9, "y":0},
-        {"label":"0", "x":10, "y":0},
-        {"label":"Backspace", "x":11, "y":0},
-        {"label":"Tab", "x":0, "y":1},
-        {"label":"Q", "x":1, "y":1},
-        {"label":"W", "x":2, "y":1},
-        {"label":"E", "x":3, "y":1},
-        {"label":"R", "x":4, "y":1},
-        {"label":"T", "x":5, "y":1},
-        {"label":"Y", "x":6, "y":1},
-        {"label":"U", "x":7, "y":1},
-        {"label":"I", "x":8, "y":1},
-        {"label":"O", "x":9, "y":1},
-        {"label":"P", "x":10, "y":1},
-        {"label":"Delete", "x":11, "y":1},
-        {"label":"Esc", "x":0, "y":2},
-        {"label":"A", "x":1, "y":2},
-        {"label":"S", "x":2, "y":2},
-        {"label":"D", "x":3, "y":2},
-        {"label":"F", "x":4, "y":2},
-        {"label":"G", "x":5, "y":2},
-        {"label":"H", "x":6, "y":2},
-        {"label":"J", "x":7, "y":2},
-        {"label":"K", "x":8, "y":2},
-        {"label":"L", "x":9, "y":2},
-        {"label":";", "x":10, "y":2},
-        {"label":"'", "x":11, "y":2},
-        {"label":"Shift", "x":0, "y":3},
-        {"label":"Z", "x":1, "y":3},
-        {"label":"X", "x":2, "y":3},
-        {"label":"C", "x":3, "y":3},
-        {"label":"V", "x":4, "y":3},
-        {"label":"B", "x":5, "y":3},
-        {"label":"N", "x":6, "y":3},
-        {"label":"M", "x":7, "y":3},
-        {"label":",", "x":8, "y":3},
-        {"label":".", "x":9, "y":3},
-        {"label":"/", "x":10, "y":3},
-        {"label":"Enter", "x":11, "y":3},
-        {"label":"Fn", "x":0, "y":4},
-        {"label":"Ctrl", "x":1, "y":4},
-        {"label":"Alt", "x":2, "y":4},
-        {"label":"Meta", "x":3, "y":4},
-        {"label":"Lower", "x":4, "y":4},
-        {"label":"Space", "x":5, "y":4},
-        {"label":"Space", "x":6, "y":4},
-        {"label":"Raise", "x":7, "y":4},
-        {"label":"Left", "x":8, "y":4},
-        {"label":"Down", "x":9, "y":4},
-        {"label":"Up", "x":10, "y":4},
-        {"label":"Right", "x":11, "y":4}
-      ]
-    },
-    "LAYOUT_1x2uC": {
-      "layout": [
-        {"label":"`", "x":0, "y":0},
-        {"label":"1", "x":1, "y":0},
-        {"label":"2", "x":2, "y":0},
-        {"label":"3", "x":3, "y":0},
-        {"label":"4", "x":4, "y":0},
-        {"label":"5", "x":5, "y":0},
-        {"label":"6", "x":6, "y":0},
-        {"label":"7", "x":7, "y":0},
-        {"label":"8", "x":8, "y":0},
-        {"label":"9", "x":9, "y":0},
-        {"label":"0", "x":10, "y":0},
-        {"label":"Backspace", "x":11, "y":0},
-        {"label":"Tab", "x":0, "y":1},
-        {"label":"Q", "x":1, "y":1},
-        {"label":"W", "x":2, "y":1},
-        {"label":"E", "x":3, "y":1},
-        {"label":"R", "x":4, "y":1},
-        {"label":"T", "x":5, "y":1},
-        {"label":"Y", "x":6, "y":1},
-        {"label":"U", "x":7, "y":1},
-        {"label":"I", "x":8, "y":1},
-        {"label":"O", "x":9, "y":1},
-        {"label":"P", "x":10, "y":1},
-        {"label":"Delete", "x":11, "y":1},
-        {"label":"Esc", "x":0, "y":2},
-        {"label":"A", "x":1, "y":2},
-        {"label":"S", "x":2, "y":2},
-        {"label":"D", "x":3, "y":2},
-        {"label":"F", "x":4, "y":2},
-        {"label":"G", "x":5, "y":2},
-        {"label":"H", "x":6, "y":2},
-        {"label":"J", "x":7, "y":2},
-        {"label":"K", "x":8, "y":2},
-        {"label":"L", "x":9, "y":2},
-        {"label":";", "x":10, "y":2},
-        {"label":"'", "x":11, "y":2},
-        {"label":"Shift", "x":0, "y":3},
-        {"label":"Z", "x":1, "y":3},
-        {"label":"X", "x":2, "y":3},
-        {"label":"C", "x":3, "y":3},
-        {"label":"V", "x":4, "y":3},
-        {"label":"B", "x":5, "y":3},
-        {"label":"N", "x":6, "y":3},
-        {"label":"M", "x":7, "y":3},
-        {"label":",", "x":8, "y":3},
-        {"label":".", "x":9, "y":3},
-        {"label":"/", "x":10, "y":3},
-        {"label":"Enter", "x":11, "y":3},
-        {"label":"Fn", "x":0, "y":4},
-        {"label":"Ctrl", "x":1, "y":4},
-        {"label":"Alt", "x":2, "y":4},
-        {"label":"Meta", "x":3, "y":4},
-        {"label":"Lower", "x":4, "y":4},
-        {"label":"Space", "x":5, "y":4, "w":2},
-        {"label":"Raise", "x":7, "y":4},
-        {"label":"Left", "x":8, "y":4},
-        {"label":"Down", "x":9, "y":4},
-        {"label":"Up", "x":10, "y":4},
-        {"label":"Right", "x":11, "y":4}
-      ]
-    }
-  }
-}
diff --git a/keyboards/handwired/ortho60/keymaps/default/keymap.c b/keyboards/handwired/ortho60/keymaps/default/keymap.c
deleted file mode 100644
index 8617b6341..000000000
--- a/keyboards/handwired/ortho60/keymaps/default/keymap.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BASE 0
-#define _RAISE 1
-#define _LOWER 2
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_BASE] = LAYOUT_ortho_5x12( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
-  BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
-),
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = LAYOUT_ortho_5x12( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = LAYOUT_ortho_5x12( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
-)
-};
diff --git a/keyboards/handwired/ortho60/ld/MKL26Z64.ld b/keyboards/handwired/ortho60/ld/MKL26Z64.ld
deleted file mode 100644
index c4ca8b874..000000000
--- a/keyboards/handwired/ortho60/ld/MKL26Z64.ld
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x100
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 62k - 0x410
-  flash3   : org = 0x0000F800, len = 2k
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFFF800, len = 8k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__  = LENGTH(flash3);
-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
diff --git a/keyboards/handwired/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/handwired/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld
deleted file mode 100644
index d0688ef60..000000000
--- a/keyboards/handwired/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * ST32F103xB memory setup for use with the maplemini bootloader.
- * You will have to
- * 	#define CORTEX_VTOR_INIT 0x5000
- * in your projects chconf.h
- */
-MEMORY
-{
-    flash0  : org = 0x08002000, len = 64k - 0x2000
-    flash1  : org = 0x00000000, len = 0
-    flash2  : org = 0x00000000, len = 0
-    flash3  : org = 0x00000000, len = 0
-    flash4  : org = 0x00000000, len = 0
-    flash5  : org = 0x00000000, len = 0
-    flash6  : org = 0x00000000, len = 0
-    flash7  : org = 0x00000000, len = 0
-    ram0    : org = 0x20000000, len = 20k
-    ram1    : org = 0x00000000, len = 0
-    ram2    : org = 0x00000000, len = 0
-    ram3    : org = 0x00000000, len = 0
-    ram4    : org = 0x00000000, len = 0
-    ram5    : org = 0x00000000, len = 0
-    ram6    : org = 0x00000000, len = 0
-    ram7    : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
diff --git a/keyboards/handwired/ortho60/led.c b/keyboards/handwired/ortho60/led.c
deleted file mode 100644
index f15baed16..000000000
--- a/keyboards/handwired/ortho60/led.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-#include "backlight.h"
-#include "led.h"
-#include "printf.h"
-
-void backlight_init_ports(void) {
-    printf("backlight_init_ports()\n");
-    #ifdef BACKLIGHT_ENABLE
-    palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(GPIOA, 8);
-    #endif
-}
-
-void backlight_set(uint8_t level) {
-    printf("backlight_set(%d)\n", level);
-    #ifdef BACKLIGHT_ENABLE
-    if (level == 0) {
-        // Turn backlight off
-        palSetPad(GPIOA, 8);
-    } else {
-        // Turn backlight on
-        palClearPad(GPIOA, 8);
-    }
-    #endif
-}
-
-void led_set(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        palClearPad(GPIOC, 13);
-    } else {
-    	palSetPad(GPIOC, 13);
-    }
-}
diff --git a/keyboards/handwired/ortho60/mcuconf.h b/keyboards/handwired/ortho60/mcuconf.h
deleted file mode 100644
index 9945e7408..000000000
--- a/keyboards/handwired/ortho60/mcuconf.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   FALSE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC1_IRQ_PRIORITY         6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM8                  FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY              15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-#endif /* _MCUCONF_H_ */
diff --git a/keyboards/handwired/ortho60/ortho60.c b/keyboards/handwired/ortho60/ortho60.c
deleted file mode 100644
index 32db007b6..000000000
--- a/keyboards/handwired/ortho60/ortho60.c
+++ /dev/null
@@ -1,32 +0,0 @@
-
-#include "ortho60.h"
-
-#include "ch.h"
-#include "hal.h"
-
-#include "underglow.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-
-/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-#define LED_ON()    do { palClearPad(GPIOC, 13) ;} while (0)
-#define LED_OFF()   do { palSetPad(GPIOC, 13); } while (0)
-#define LED_TGL()   do { palTogglePad(GPIOC, 13); } while (0)
-#endif
-
-void matrix_init_kb(void){
-      /* MOSI pin*/
-    palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-
-    LED_ON();
-    palSetPad(GPIOA, 8);
-    wait_ms(500);
-    palClearPad(GPIOA, 8);
-    LED_OFF();
-
-    leds_init();
-
-
-}
diff --git a/keyboards/handwired/ortho60/ortho60.h b/keyboards/handwired/ortho60/ortho60.h
deleted file mode 100644
index 0f3ae127a..000000000
--- a/keyboards/handwired/ortho60/ortho60.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_1x2uC( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
-    k40, k41, k42, k43, k44,   k45   , k47, k48, k49, k4a, k4b \
-) \
-{ \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
-    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \
-    { k40, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4a, k4b }, \
-}
-
-#define LAYOUT_ortho_5x12( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
-    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \
-) \
-{ \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
-    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \
-    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b }, \
-}
diff --git a/keyboards/handwired/ortho60/readme.md b/keyboards/handwired/ortho60/readme.md
deleted file mode 100644
index be2a027c4..000000000
--- a/keyboards/handwired/ortho60/readme.md
+++ /dev/null
@@ -1,12 +0,0 @@
-# Ortho 60
-
-A Blue Pill STM32F103C8T6-based 12x5 ortholinear keyboard.
-
-Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
-Hardware Supported: Blue Pill STM32F103C8T6  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/ortho60:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/ortho60/rules.mk b/keyboards/handwired/ortho60/rules.mk
deleted file mode 100644
index 91acb3c5c..000000000
--- a/keyboards/handwired/ortho60/rules.mk
+++ /dev/null
@@ -1,54 +0,0 @@
-# project specific files
-SRC =	led.c \
-		  underglow.c \
-		  hsv2rgb.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes
-
-LAYOUTS = ortho_5x12
diff --git a/keyboards/handwired/ortho60/underglow.c b/keyboards/handwired/ortho60/underglow.c
deleted file mode 100644
index 1383af189..000000000
--- a/keyboards/handwired/ortho60/underglow.c
+++ /dev/null
@@ -1,157 +0,0 @@
-#include "ch.h"
-#include "hal.h"
-
-#include "hsv2rgb.h"
-#include "underglow.h"
-
-#define BYTES_FOR_LED_BYTE 4
-#define NB_COLORS 3
-#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
-#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
-#define RESET_SIZE 200
-#define PREAMBLE_SIZE 4
-
-// Define the spi your LEDs are plugged to here
-#define LEDS_SPI SPID2
-// Define the number of LEDs you wish to control in your LED strip
-#define NB_LEDS 8
-
-#define LED_SPIRAL 1
-
-static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
-static uint8_t get_protocol_eq(uint8_t data, int pos);
-
-/*
- * This lib is meant to be used asynchronously, thus the colors contained in
- * the txbuf will be sent in loop, so that the colors are always the ones you
- * put in the table (the user thus have less to worry about)
- *
- * Since the data are sent via DMA, and the call to spiSend is a blocking one,
- * the processor ressources are not used to much, if you see your program being
- * too slow, simply add a:
- * chThdSleepMilliseconds(x);
- * after the spiSend, where you increment x untill you are satisfied with your
- * program speed, another trick may be to lower this thread priority : your call
- */
-static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
-static THD_FUNCTION(ledsThread, arg) {
-  (void) arg;
-  while(1){
-    spiSend(&LEDS_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
-  }
-}
-
-#if LED_SPIRAL
-/*
- * 'Led spiral' is a simple demo in which we put all the leds to the same
- * color, where this color does all the hsv circle in loop.
- * If you want to launch the thread that will chage the led colors to the
- * appropriate value, simply set LED_SPIRAL to 1.
- */
-static THD_WORKING_AREA(HSVTRANS_WA, 128);
-static THD_FUNCTION(hsv_transThread, arg){
-  (void) arg;
-  hsv_color color = {0, 255, 127};
-  while(1){
-    color.h += 1;
-    color.h %= 256;
-    set_leds_color_hsv(color);
-    chThdSleepMilliseconds(50);
-  }
-}
-#endif
-
-static const SPIConfig spicfg = {
-  NULL,
-  GPIOB,
-  15,
-  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
-};
-
-/*
- * Function used to initialize the driver.
- *
- * Starts by shutting off all the LEDs.
- * Then gets access on the LED_SPI driver.
- * May eventually launch an animation on the LEDs (e.g. a thread setting the
- * txbuff values)
- */
-void leds_init(void){
-  for(int i = 0; i < RESET_SIZE; i++)
-    txbuf[DATA_SIZE+i] = 0x00;
-  for (int i=0; i<PREAMBLE_SIZE; i++)
-    txbuf[i] = 0x00;
-  spiAcquireBus(&LEDS_SPI);              /* Acquire ownership of the bus.    */
-  spiStart(&LEDS_SPI, &spicfg);          /* Setup transfer parameters.       */
-  spiSelect(&LEDS_SPI);                  /* Slave Select assertion.          */
-  chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
-#if LED_SPIRAL
-  chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
-      NORMALPRIO, hsv_transThread, NULL);
-#endif
-}
-
-/*
- * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
- * the ws2812b protocol, we use this helper function to translate bytes into
- * 0s and 1s for the LED (with the appropriate timing).
- */
-static uint8_t get_protocol_eq(uint8_t data, int pos){
-  uint8_t eq = 0;
-  if (data & (1 << (2*(3-pos))))
-    eq = 0b1110;
-  else
-    eq = 0b1000;
-  if (data & (2 << (2*(3-pos))))
-    eq += 0b11100000;
-  else
-    eq += 0b10000000;
-  return eq;
-}
-
-/*
- * If you want to set a LED's color in the HSV color space, simply call this
- * function with a hsv_color containing the desired color and the index of the
- * led on the LED strip (starting from 0, the first one being the closest the
- * first plugged to the board)
- *
- * Only set the color of the LEDs through the functions given by this API
- * (unless you really know what you are doing)
- */
-void set_led_color_hsv(hsv_color color, int pos){
-  set_led_color_rgb(hsv2rgb(color), pos);
-}
-
-/*
- * If you want to set a LED's color in the RGB color space, simply call this
- * function with a hsv_color containing the desired color and the index of the
- * led on the LED strip (starting from 0, the first one being the closest the
- * first plugged to the board)
- *
- * Only set the color of the LEDs through the functions given by this API
- * (unless you really know what you are doing)
- */
-void set_led_color_rgb(rgb_color color, int pos){
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
-}
-
-/*
- * Same as the two above, but sets all the LEDs in the LED strip (HSV)
- */
-void set_leds_color_hsv(hsv_color color){
-  for(int i = 0; i < NB_LEDS; i++)
-    set_led_color_hsv(color, i);
-}
-
-/*
- * Same as the two above, but sets all the LEDs in the LED strip (RGB)
- */
-void set_leds_color_rgb(rgb_color color){
-  for(int i = 0; i < NB_LEDS; i++)
-    set_led_color_rgb(color, i);
-}
\ No newline at end of file
diff --git a/keyboards/handwired/ortho60/underglow.h b/keyboards/handwired/ortho60/underglow.h
deleted file mode 100644
index ff1195279..000000000
--- a/keyboards/handwired/ortho60/underglow.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#pragma once
-
-#include "hsv2rgb.h"
-
-void set_leds_color_hsv(hsv_color color);
-void set_leds_color_rgb(rgb_color color);
-void set_led_color_hsv(hsv_color color, int pos);
-void set_led_color_rgb(rgb_color color, int pos);
-
-void leds_init(void);
diff --git a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.c b/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.c
deleted file mode 100644
index 8c5a87f35..000000000
--- a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-// Value to place in RTC backup register 10 for persistent bootloader mode
-#define RTC_BOOTLOADER_FLAG 0x424C
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-   //JTAG-DP Disabled and SW-DP Enabled
-   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
-   //Set backup register DR10 to enter bootloader on reset
-   BKP->DR10 = RTC_BOOTLOADER_FLAG;
-}
diff --git a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.h b/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.h
deleted file mode 100644
index 9427adabf..000000000
--- a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOA_LED               8
-#define GPIOD_OSC_IN            0
-#define GPIOD_OSC_OUT           1
-
-/* In case your board has a "USB enable" hardware
-   controlled by a pin, define it here. (It could be just
-   a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC          10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output  (USART2 TX).
- * PA3  - Normal input      (USART2 RX).
- * PA9  - Alternate output  (USART1 TX).
- * PA10 - Normal input      (USART1 RX).
- */
-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10    - Push Pull output  (USB switch).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13    - Push Pull output  (LED).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
-   have a 1.5k resistor connected on one end to the D+ line
-   and on the other end to some pin. Or even a slightly more
-   complicated "USB enable" circuit, controlled by a pin.
-   That should go here.
-
-   However on some boards (e.g. one that I have), there's no
-   such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.mk b/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.mk
deleted file mode 100644
index 6b8b312fd..000000000
--- a/keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/handwired/practice60/bootloader_defs.h b/keyboards/handwired/practice60/bootloader_defs.h
deleted file mode 100644
index 6b8fa9f72..000000000
--- a/keyboards/handwired/practice60/bootloader_defs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
diff --git a/keyboards/handwired/practice60/chconf.h b/keyboards/handwired/practice60/chconf.h
deleted file mode 100644
index bbd9b2da6..000000000
--- a/keyboards/handwired/practice60/chconf.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 100000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 0
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 FALSE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/practice60/config.h b/keyboards/handwired/practice60/config.h
deleted file mode 100644
index c015bb746..000000000
--- a/keyboards/handwired/practice60/config.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER QMK
-#define PRODUCT Practice 60
-#define DESCRIPTION Practice 60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
-#define BACKLIGHT_LEVELS 6
-#define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define RGBLIGHT_ANIMATIONS
-
-#define WS2812_LED_N 9
-#define RGBLED_NUM WS2812_LED_N
-#define PORT_WS2812     GPIOB
-#define PIN_WS2812      15
-#define WS2812_SPI SPID2
-
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/handwired/practice60/halconf.h b/keyboards/handwired/practice60/halconf.h
deleted file mode 100644
index 72879a575..000000000
--- a/keyboards/handwired/practice60/halconf.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 TRUE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 TRUE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/keyboards/handwired/practice60/info.json b/keyboards/handwired/practice60/info.json
deleted file mode 100644
index cffbcf492..000000000
--- a/keyboards/handwired/practice60/info.json
+++ /dev/null
@@ -1,74 +0,0 @@
-{
-  "keyboard_name": "Practice 60",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
-  "layouts": {
-    "LAYOUT_60_ansi": {
-      "layout": [
-        {"label":"`", "x":0, "y":0},
-        {"label":"1", "x":1, "y":0},
-        {"label":"2", "x":2, "y":0},
-        {"label":"3", "x":3, "y":0},
-        {"label":"4", "x":4, "y":0},
-        {"label":"5", "x":5, "y":0},
-        {"label":"6", "x":6, "y":0},
-        {"label":"7", "x":7, "y":0},
-        {"label":"8", "x":8, "y":0},
-        {"label":"9", "x":9, "y":0},
-        {"label":"0", "x":10, "y":0},
-        {"label":"-", "x":11, "y":0},
-        {"label":"=", "x":12, "y":0},
-        {"label":"Backspace", "x":13, "y":0, "w":2},
-        {"label":"Tab", "x":0, "y":1, "w":1.5},
-        {"label":"Q", "x":1.5, "y":1},
-        {"label":"W", "x":2.5, "y":1},
-        {"label":"E", "x":3.5, "y":1},
-        {"label":"R", "x":4.5, "y":1},
-        {"label":"T", "x":5.5, "y":1},
-        {"label":"Y", "x":6.5, "y":1},
-        {"label":"U", "x":7.5, "y":1},
-        {"label":"I", "x":8.5, "y":1},
-        {"label":"O", "x":9.5, "y":1},
-        {"label":"P", "x":10.5, "y":1},
-        {"label":"[", "x":11.5, "y":1},
-        {"label":"]", "x":12.5, "y":1},
-        {"label":"\\", "x":13.5, "y":1, "w":1.5},
-        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-        {"label":"A", "x":1.75, "y":2},
-        {"label":"S", "x":2.75, "y":2},
-        {"label":"D", "x":3.75, "y":2},
-        {"label":"F", "x":4.75, "y":2},
-        {"label":"G", "x":5.75, "y":2},
-        {"label":"H", "x":6.75, "y":2},
-        {"label":"J", "x":7.75, "y":2},
-        {"label":"K", "x":8.75, "y":2},
-        {"label":"L", "x":9.75, "y":2},
-        {"label":";", "x":10.75, "y":2},
-        {"label":"'", "x":11.75, "y":2},
-        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-        {"label":"Shift", "x":0, "y":3, "w":2.25},
-        {"label":"Z", "x":2.25, "y":3},
-        {"label":"X", "x":3.25, "y":3},
-        {"label":"C", "x":4.25, "y":3},
-        {"label":"V", "x":5.25, "y":3},
-        {"label":"B", "x":6.25, "y":3},
-        {"label":"N", "x":7.25, "y":3},
-        {"label":"M", "x":8.25, "y":3},
-        {"label":",", "x":9.25, "y":3},
-        {"label":".", "x":10.25, "y":3},
-        {"label":"/", "x":11.25, "y":3},
-        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
-        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-        {"label":"GUI", "x":1.25, "y":4, "w":1.25},
-        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-        {"label":"Space", "x":3.75, "y":4, "w":6.25},
-        {"label":"Alt", "x":10, "y":4, "w":1.25},
-        {"label":"GUI", "x":11.25, "y":4, "w":1.25},
-        {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-        {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-      ]
-    }
-  }
-}
diff --git a/keyboards/handwired/practice60/keymaps/default/keymap.c b/keyboards/handwired/practice60/keymaps/default/keymap.c
deleted file mode 100644
index 66ebe0646..000000000
--- a/keyboards/handwired/practice60/keymaps/default/keymap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BASE 0
-#define _FN1 1
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = LAYOUT_60_ansi(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
-  ),
-
-  [_FN1] = LAYOUT_60_ansi(
-    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
-    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \
-    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, \
-    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, _______
-  )
-};
diff --git a/keyboards/handwired/practice60/ld/MKL26Z64.ld b/keyboards/handwired/practice60/ld/MKL26Z64.ld
deleted file mode 100644
index c4ca8b874..000000000
--- a/keyboards/handwired/practice60/ld/MKL26Z64.ld
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x100
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 62k - 0x410
-  flash3   : org = 0x0000F800, len = 2k
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFFF800, len = 8k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__  = LENGTH(flash3);
-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
diff --git a/keyboards/handwired/practice60/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/handwired/practice60/ld/STM32F103x8_stm32duino_bootloader.ld
deleted file mode 100644
index d0688ef60..000000000
--- a/keyboards/handwired/practice60/ld/STM32F103x8_stm32duino_bootloader.ld
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * ST32F103xB memory setup for use with the maplemini bootloader.
- * You will have to
- * 	#define CORTEX_VTOR_INIT 0x5000
- * in your projects chconf.h
- */
-MEMORY
-{
-    flash0  : org = 0x08002000, len = 64k - 0x2000
-    flash1  : org = 0x00000000, len = 0
-    flash2  : org = 0x00000000, len = 0
-    flash3  : org = 0x00000000, len = 0
-    flash4  : org = 0x00000000, len = 0
-    flash5  : org = 0x00000000, len = 0
-    flash6  : org = 0x00000000, len = 0
-    flash7  : org = 0x00000000, len = 0
-    ram0    : org = 0x20000000, len = 20k
-    ram1    : org = 0x00000000, len = 0
-    ram2    : org = 0x00000000, len = 0
-    ram3    : org = 0x00000000, len = 0
-    ram4    : org = 0x00000000, len = 0
-    ram5    : org = 0x00000000, len = 0
-    ram6    : org = 0x00000000, len = 0
-    ram7    : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
diff --git a/keyboards/handwired/practice60/led.c b/keyboards/handwired/practice60/led.c
deleted file mode 100644
index a9ede5bba..000000000
--- a/keyboards/handwired/practice60/led.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-#include "backlight.h"
-#include "led.h"
-#include "led_custom.h"
-#include "printf.h"
-
-static void breathing_callback(PWMDriver *pwmp);
-
-static PWMConfig pwmCFG = {
-  0xFFFF,                              /* PWM clock frequency  */
-  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
-  NULL,                               /* No Callback */
-  {
-      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
-      {PWM_OUTPUT_DISABLED, NULL},
-      {PWM_OUTPUT_DISABLED, NULL},
-      {PWM_OUTPUT_DISABLED, NULL}
-  },
-  0,                                  /* HW dependent part.*/
-  0
-};
-
-static PWMConfig pwmCFG_breathing = {
-  0xFFFF,                              /* 10kHz PWM clock frequency  */
-  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
-  breathing_callback,                               /* Breathing Callback */
-  {
-      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
-      {PWM_OUTPUT_DISABLED, NULL},
-      {PWM_OUTPUT_DISABLED, NULL},
-      {PWM_OUTPUT_DISABLED, NULL}
-  },
-  0,                                  /* HW dependent part.*/
-  0
-};
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-
-void backlight_init_ports(void) {
-    printf("backlight_init_ports()\n");
-    #ifdef BACKLIGHT_ENABLE
-
-    palSetPadMode(GPIOA, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-    pwmStart(&PWMD1, &pwmCFG);
-    pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1, 0xFFFF,cie_lightness(0xFFFF)));
-    #endif
-}
-
-void backlight_set(uint8_t level) {
-    printf("backlight_set(%d)\n", level);
-    #ifdef BACKLIGHT_ENABLE
-    uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
-    printf("duty: (%d)\n", duty);
-    if (level == 0) {
-        // Turn backlight off
-        pwmDisableChannel(&PWMD1, 0);
-    } else {
-      // Turn backlight on
-      if(!is_breathing()){
-        pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1,0xFFFF,duty));
-      }
-    }
-    #endif
-}
-
-
-uint8_t backlight_tick = 0;
-
-void backlight_task(void) {
-}
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-bool is_breathing(void) {
-    return PWMD1.config == &pwmCFG_breathing;
-}
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
-
-
-void breathing_interrupt_enable(void){
-    pwmStop(&PWMD1);
-    printf("starting with callback\n");
-    pwmStart(&PWMD1, &pwmCFG_breathing);
-    chSysLockFromISR();
-    pwmEnablePeriodicNotification(&PWMD1);
-    pwmEnableChannelI(
-      &PWMD1,
-      0,
-      PWM_FRACTION_TO_WIDTH(
-        &PWMD1,
-        0xFFFF,
-        0xFFFF
-      )
-    );
-    chSysUnlockFromISR();
-}
-
-void breathing_interrupt_disable(void){
-    pwmStop(&PWMD1);
-    printf("starting without callback\n");
-    pwmStart(&PWMD1, &pwmCFG);
-}
-
-void breathing_enable(void)
-{
-  printf("breathing_enable()\n");
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  breathing_interrupt_enable();
-}
-
-void breathing_pulse(void)
-{
-    if (get_backlight_level() == 0)
-      breathing_min();
-    else
-      breathing_max();
-    breathing_halt = BREATHING_HALT_ON;
-    breathing_interrupt_enable();
-}
-
-void breathing_disable(void)
-{
-    printf("breathing_disable()\n");
-    breathing_interrupt_disable();
-    // Restore backlight level
-    backlight_set(get_backlight_level());
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing()){
-    printf("disable breathing\n");
-    breathing_disable();
-  } else {
-    printf("enable breathing\n");
-    breathing_enable();
-  }
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-static void breathing_callback(PWMDriver *pwmp)
-{
-  (void)pwmp;
-  uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      breathing_interrupt_disable();
-  }
-
-  uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
-
-  chSysLockFromISR();
-  pwmEnableChannelI(
-    &PWMD1,
-    0,
-    PWM_FRACTION_TO_WIDTH(
-      &PWMD1,
-      0xFFFF,
-      duty
-    )
-  );
-  chSysUnlockFromISR();
-}
-
-
-void led_set(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-      palSetPad(GPIOC, 13);
-    } else {
-    	palClearPad(GPIOC, 13);
-    }
-}
diff --git a/keyboards/handwired/practice60/led_custom.h b/keyboards/handwired/practice60/led_custom.h
deleted file mode 100644
index 8451c06d6..000000000
--- a/keyboards/handwired/practice60/led_custom.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#pragma once
-
-void backlight_task(void);
-void breathing_interrupt_disable(void);
-void breathing_interrupt_enable(void);
-bool is_breathing(void);
diff --git a/keyboards/handwired/practice60/mcuconf.h b/keyboards/handwired/practice60/mcuconf.h
deleted file mode 100644
index fced27289..000000000
--- a/keyboards/handwired/practice60/mcuconf.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   FALSE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC1_IRQ_PRIORITY         6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM8                  FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  TRUE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY              15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-#endif /* _MCUCONF_H_ */
diff --git a/keyboards/handwired/practice60/practice60.c b/keyboards/handwired/practice60/practice60.c
deleted file mode 100644
index acc0f00e5..000000000
--- a/keyboards/handwired/practice60/practice60.c
+++ /dev/null
@@ -1,35 +0,0 @@
-
-#include "practice60.h"
-
-#include "ch.h"
-#include "hal.h"
-#include "led_custom.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-
-/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-#define LED_ON()    do { palClearPad(GPIOC, 13) ;} while (0)
-#define LED_OFF()   do { palSetPad(GPIOC, 13); } while (0)
-#define LED_TGL()   do { palTogglePad(GPIOC, 13); } while (0)
-#endif
-
-void matrix_init_kb(void){
-      /* MOSI pin*/
-    palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-    LED_ON();
-    wait_ms(500);
-    LED_OFF();
-
-#ifdef RGBLIGHT_ENABLE
-    leds_init();
-#endif
-}
-
-void matrix_scan_kb(void)
-{
-  #ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-  #endif
-}
diff --git a/keyboards/handwired/practice60/practice60.h b/keyboards/handwired/practice60/practice60.h
deleted file mode 100644
index 5ebba8fb8..000000000
--- a/keyboards/handwired/practice60/practice60.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_60_ansi( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-  K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,     K2C, \
-  K30,    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,        K3B, \
-  K40,  K41,  K42,              K43,             K49,  K4A,  K4B,  K4C \
-) { \
-  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D    }, \
-  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    K1D    }, \
-  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  K2C,    KC_NO  }, \
-  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KC_NO,  KC_NO  }, \
-  {  K40,  K41,  K42,  K43,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,    KC_NO  }  \
-}
diff --git a/keyboards/handwired/practice60/readme.md b/keyboards/handwired/practice60/readme.md
deleted file mode 100644
index b23d7de69..000000000
--- a/keyboards/handwired/practice60/readme.md
+++ /dev/null
@@ -1,3 +0,0 @@
-# Practice 60
-
-Blue Pill STM32F103C8T6 based 60% board
\ No newline at end of file
diff --git a/keyboards/handwired/practice60/rules.mk b/keyboards/handwired/practice60/rules.mk
deleted file mode 100644
index e417c91ee..000000000
--- a/keyboards/handwired/practice60/rules.mk
+++ /dev/null
@@ -1,56 +0,0 @@
-# project specific files
-SRC =	led.c \
-		  ws2812.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-
-LAYOUTS = 60_ansi
-
-DEFAULT_FOLDER = handwired/practice60
diff --git a/keyboards/handwired/practice60/ws2812.c b/keyboards/handwired/practice60/ws2812.c
deleted file mode 100644
index 7d0f909c0..000000000
--- a/keyboards/handwired/practice60/ws2812.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * LEDDriver.c
- *
- *  Created on: Aug 26, 2013
- *      Author: Omri Iluz
- */
-
-#include "ws2812.h"
-#include "stdlib.h"
-
-#define BYTES_FOR_LED_BYTE 4
-#define NB_COLORS 3
-#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
-#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
-#define RESET_SIZE 200
-#define PREAMBLE_SIZE 4
-// Define the spi your LEDs are plugged to here
-#define WS2812_SPI SPID2
-// Define the number of LEDs you wish to control in your LED strip
-#define NB_LEDS RGBLED_NUM
-
- #define LED_SPIRAL 1
-
- static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
-static uint8_t get_protocol_eq(uint8_t data, int pos);
-
- /*
- * This lib is meant to be used asynchronously, thus the colors contained in
- * the txbuf will be sent in loop, so that the colors are always the ones you
- * put in the table (the user thus have less to worry about)
- *
- * Since the data are sent via DMA, and the call to spiSend is a blocking one,
- * the processor ressources are not used to much, if you see your program being
- * too slow, simply add a:
- * chThdSleepMilliseconds(x);
- * after the spiSend, where you increment x untill you are satisfied with your
- * program speed, another trick may be to lower this thread priority : your call
- */
-static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
-static THD_FUNCTION(ledsThread, arg) {
-  (void) arg;
-  while(1){
-    spiSend(&WS2812_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
-  }
-}
-
- static const SPIConfig spicfg = {
-  NULL,
-  PORT_WS2812,
-  PIN_WS2812,
-  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us (2.25 MHz)
-};
-
- /*
- * Function used to initialize the driver.
- *
- * Starts by shutting off all the LEDs.
- * Then gets access on the LED_SPI driver.
- * May eventually launch an animation on the LEDs (e.g. a thread setting the
- * txbuff values)
- */
-void leds_init(void){
-  /* MOSI pin*/
-  palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-  for(int i = 0; i < RESET_SIZE; i++)
-    txbuf[DATA_SIZE+i] = 0x00;
-  for (int i=0; i<PREAMBLE_SIZE; i++)
-    txbuf[i] = 0x00;
-  spiAcquireBus(&WS2812_SPI);              /* Acquire ownership of the bus.    */
-  spiStart(&WS2812_SPI, &spicfg);          /* Setup transfer parameters.       */
-  spiSelect(&WS2812_SPI);                  /* Slave Select assertion.          */
-  chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
-}
-
- /*
- * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
- * the ws2812b protocol, we use this helper function to translate bytes into
- * 0s and 1s for the LED (with the appropriate timing).
- */
-static uint8_t get_protocol_eq(uint8_t data, int pos){
-  uint8_t eq = 0;
-  if (data & (1 << (2*(3-pos))))
-    eq = 0b1110;
-  else
-    eq = 0b1000;
-  if (data & (2 << (2*(3-pos))))
-    eq += 0b11100000;
-  else
-    eq += 0b10000000;
-  return eq;
-}
-
-
- void WS2812_init(void) {
-  leds_init();
-}
-
- void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
-  uint8_t i = 0;
-  while (i < number_of_leds) {
-    set_led_color_rgb(ledarray[i], i);
-    i++;
-  }
-}
-
- /*
- * If you want to set a LED's color in the RGB color space, simply call this
- * function with a hsv_color containing the desired color and the index of the
- * led on the LED strip (starting from 0, the first one being the closest the
- * first plugged to the board)
- *
- * Only set the color of the LEDs through the functions given by this API
- * (unless you really know what you are doing)
- */
-void set_led_color_rgb(LED_TYPE color, int pos){
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
-  for(int j = 0; j < 4; j++)
-    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
-}
-
- void set_leds_color_rgb(LED_TYPE color){
-  for(int i = 0; i < NB_LEDS; i++)
-    set_led_color_rgb(color, i);
-}
-
-
- void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
-
- }
diff --git a/keyboards/handwired/practice60/ws2812.h b/keyboards/handwired/practice60/ws2812.h
deleted file mode 100644
index 3b61ddcfa..000000000
--- a/keyboards/handwired/practice60/ws2812.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#pragma once
-
-#include "hal.h"
-#include "rgblight_types.h"
-
-
-void set_leds_color_rgb(LED_TYPE color);
-void set_led_color_rgb(LED_TYPE color, int pos);
-void leds_init(void);
-
-
- // This is what users will use to interface with this
-void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
-
-
-void WS2812_init(void);
-void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
-void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
-void WS2812_send_colors(void);