summaryrefslogtreecommitdiffstats
path: root/keyboards/planck/keymaps
diff options
context:
space:
mode:
authorJack Humbert <jack.humb@gmail.com>2017-06-10 03:09:52 +0200
committerGitHub <noreply@github.com>2017-06-10 03:09:52 +0200
commitd81135410cb6c6160395bf38fd0332893a68ea58 (patch)
tree6c206bc9cef755f3c244383de1baca29ab108608 /keyboards/planck/keymaps
parent5801a1f8af5f13779581dbf16052d7286af1f579 (diff)
parent1502c9c93529c44ba7c67f48c939fbeca2c97bed (diff)
downloadqmk_firmware-d81135410cb6c6160395bf38fd0332893a68ea58.tar.gz
qmk_firmware-d81135410cb6c6160395bf38fd0332893a68ea58.tar.xz
Merge pull request #1382 from binaryplease/handwired_binaryplease
Handwired binaryplease
Diffstat (limited to 'keyboards/planck/keymaps')
-rw-r--r--keyboards/planck/keymaps/handwired_binaryplease/Makefile74
-rw-r--r--keyboards/planck/keymaps/handwired_binaryplease/config.h39
-rw-r--r--keyboards/planck/keymaps/handwired_binaryplease/keymap.c317
-rw-r--r--keyboards/planck/keymaps/handwired_binaryplease/readme.md2
4 files changed, 432 insertions, 0 deletions
diff --git a/keyboards/planck/keymaps/handwired_binaryplease/Makefile b/keyboards/planck/keymaps/handwired_binaryplease/Makefile
new file mode 100644
index 000000000..538b1c26c
--- /dev/null
+++ b/keyboards/planck/keymaps/handwired_binaryplease/Makefile
@@ -0,0 +1,74 @@
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+MIDI_ENABLE ?= yes # MIDI controls
+AUDIO_ENABLE ?= no # Audio output on port C6
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
diff --git a/keyboards/planck/keymaps/handwired_binaryplease/config.h b/keyboards/planck/keymaps/handwired_binaryplease/config.h
new file mode 100644
index 000000000..5a90634bf
--- /dev/null
+++ b/keyboards/planck/keymaps/handwired_binaryplease/config.h
@@ -0,0 +1,39 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* USB Device descriptor parameter */
+
+
+
+#undef VENDOR_ID
+#undef PRODUCT_ID
+#undef MANUFACTURER
+#undef PRODUCT
+#undef DESCRIPTION
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#undef UNUSED_PINS
+#undef BACKLIGHT_PIN
+#undef BACKLIGHT_LEVELS
+
+
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define MANUFACTURER binaryplease
+#define PRODUCT Teensy_Planck
+#define DESCRIPTION A compact ortholinear keyboard using a teensy 2.0
+
+#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 0
+
+
+#endif
diff --git a/keyboards/planck/keymaps/handwired_binaryplease/keymap.c b/keyboards/planck/keymaps/handwired_binaryplease/keymap.c
new file mode 100644
index 000000000..25a422dbb
--- /dev/null
+++ b/keyboards/planck/keymaps/handwired_binaryplease/keymap.c
@@ -0,0 +1,317 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum planck_layers {
+ _QWERTY,
+ _COLEMAK,
+ /*_DVORAK,*/
+ _LOWER,
+ _RAISE,
+ /*_PLOVER,*/
+ _ADJUST
+};
+
+enum planck_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ /*DVORAK,*/
+ /*PLOVER,*/
+ LOWER,
+ RAISE,
+ BACKLIT
+ /*EXT_PLV*/
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
+ {KC_LCTL, KC_LGUI, _______, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
+ {KC_LCTL, KC_LGUI, XXXXXXX, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | O | E | U | I | D | H | T | N | S | / |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+/*[_DVORAK] = {*/
+ /*{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},*/
+ /*{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},*/
+ /*{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },*/
+ /*{KC_LCTL, BACKLIT, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}*/
+/*},*/
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
+ {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * | # | # | # | # | # | # | # | # | # | # | # | # |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | S | T | P | H | * | * | F | P | L | T | D |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | S | K | W | R | * | * | R | B | G | S | Z |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit | | | A | O | | E | U | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+/*[_PLOVER] = {*/
+ /*{KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 },*/
+ /*{XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC},*/
+ /*{XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},*/
+ /*{EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX}*/
+/*},*/
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+ {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
+ {_______, _______, _______, AU_ON, AU_OFF, _______, _______, _______, _______, _______, QWERTY, COLEMAK},
+ {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+float tone_plover[][2] = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ /*case DVORAK:*/
+ /*if (record->event.pressed) {*/
+ /*#ifdef AUDIO_ENABLE*/
+ /*PLAY_NOTE_ARRAY(tone_dvorak, false, 0);*/
+ /*#endif*/
+ /*persistant_default_layer_set(1UL<<_DVORAK);*/
+ /*}*/
+ /*return false;*/
+ /*break;*/
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ /*case PLOVER:*/
+ /*if (record->event.pressed) {*/
+ /*#ifdef AUDIO_ENABLE*/
+ /*stop_all_notes();*/
+ /*PLAY_NOTE_ARRAY(tone_plover, false, 0);*/
+ /*#endif*/
+ /*layer_off(_RAISE);*/
+ /*layer_off(_LOWER);*/
+ /*layer_off(_ADJUST);*/
+ /*layer_on(_PLOVER);*/
+ /*if (!eeconfig_is_enabled()) {*/
+ /*eeconfig_init();*/
+ /*}*/
+ /*keymap_config.raw = eeconfig_read_keymap();*/
+ /*keymap_config.nkro = 1;*/
+ /*eeconfig_update_keymap(keymap_config.raw);*/
+ /*}*/
+ /*return false;*/
+ /*break;*/
+ /*case EXT_PLV:*/
+ /*if (record->event.pressed) {*/
+ /*#ifdef AUDIO_ENABLE*/
+ /*PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);*/
+ /*#endif*/
+ /*layer_off(_PLOVER);*/
+ /*}*/
+ /*return false;*/
+ /*break;*/
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(20); // gets rid of tick
+ PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/planck/keymaps/handwired_binaryplease/readme.md b/keyboards/planck/keymaps/handwired_binaryplease/readme.md
new file mode 100644
index 000000000..de9680b49
--- /dev/null
+++ b/keyboards/planck/keymaps/handwired_binaryplease/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+