summaryrefslogtreecommitdiffstats
path: root/keyboards/preonic
diff options
context:
space:
mode:
authorJack Humbert <jack.humb@gmail.com>2019-01-26 01:18:14 +0100
committerJack Humbert <jack.humb@gmail.com>2019-01-26 17:36:35 +0100
commit8da9d3330e7904c57b240cfb1b2d3312ad81ccf9 (patch)
treedd7ff8d6d06a2471e7ebcb39b408657e0fffb379 /keyboards/preonic
parent0772b4932c9ab2734e51cdff58a566bf6b3bc922 (diff)
downloadqmk_firmware-8da9d3330e7904c57b240cfb1b2d3312ad81ccf9.tar.gz
qmk_firmware-8da9d3330e7904c57b240cfb1b2d3312ad81ccf9.tar.xz
use built-in arm stuff
Diffstat (limited to 'keyboards/preonic')
-rw-r--r--keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c126
-rw-r--r--keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h1187
-rw-r--r--keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk5
-rw-r--r--keyboards/preonic/rev3/bootloader_defs.h7
-rw-r--r--keyboards/preonic/rev3/chconf.h520
-rw-r--r--keyboards/preonic/rev3/config.h4
-rw-r--r--keyboards/preonic/rev3/halconf.h388
-rw-r--r--keyboards/preonic/rev3/matrix.c22
-rw-r--r--keyboards/preonic/rev3/mcuconf.h257
-rw-r--r--keyboards/preonic/rev3/rules.mk48
10 files changed, 12 insertions, 2552 deletions
diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c
deleted file mode 100644
index 4331155df..000000000
--- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
- VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
- VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
- enter_bootloader_mode_if_requested();
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return true;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return true;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return false;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h
deleted file mode 100644
index ec26557f3..000000000
--- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h
+++ /dev/null
@@ -1,1187 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Clueboard 60% Keyboard
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME "Planck PCB"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 0U
-#endif
-
-#define STM32_LSEDRV (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000U
-#endif
-
-// #define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F303xC
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_PIN0 0U
-#define GPIOA_PIN1 1U
-#define GPIOA_PIN2 2U
-#define GPIOA_PIN3 3U
-#define GPIOA_PIN4 4U
-#define GPIOA_PIN5 5U
-#define GPIOA_PIN6 6U
-#define GPIOA_PIN7 7U
-#define GPIOA_PIN8 8U
-#define GPIOA_PIN9 9U
-#define GPIOA_PIN10 10U
-#define GPIOA_USB_DM 11U
-#define GPIOA_USB_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_PIN0 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_PIN3 3U
-#define GPIOB_PIN4 4U
-#define GPIOB_PIN5 5U
-#define GPIOB_PIN6 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_PIN8 8U
-#define GPIOB_PIN9 9U
-#define GPIOB_PIN10 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_PIN13 13U
-#define GPIOB_PIN14 14U
-#define GPIOB_PIN15 15U
-
-#define GPIOC_PIN0 0U
-#define GPIOC_PIN1 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_PIN3 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_PIN6 6U
-#define GPIOC_PIN7 7U
-#define GPIOC_PIN8 8U
-#define GPIOC_PIN9 9U
-#define GPIOC_PIN10 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_PIN12 12U
-#define GPIOC_PIN13 13U
-#define GPIOC_PIN14 14U
-#define GPIOC_PIN15 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_PIN4 4U
-#define GPIOD_PIN5 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_PIN12 12U
-#define GPIOD_PIN13 13U
-#define GPIOD_PIN14 14U
-#define GPIOD_PIN15 15U
-
-#define GPIOE_PIN0 0U
-#define GPIOE_PIN1 1U
-#define GPIOE_PIN2 2U
-#define GPIOE_PIN3 3U
-#define GPIOE_PIN4 4U
-#define GPIOE_PIN5 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_I2C2_SDA 0U
-#define GPIOF_I2C2_SCL 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-#define GPIOG_PIN0 0U
-#define GPIOG_PIN1 1U
-#define GPIOG_PIN2 2U
-#define GPIOG_PIN3 3U
-#define GPIOG_PIN4 4U
-#define GPIOG_PIN5 5U
-#define GPIOG_PIN6 6U
-#define GPIOG_PIN7 7U
-#define GPIOG_PIN8 8U
-#define GPIOG_PIN9 9U
-#define GPIOG_PIN10 10U
-#define GPIOG_PIN11 11U
-#define GPIOG_PIN12 12U
-#define GPIOG_PIN13 13U
-#define GPIOG_PIN14 14U
-#define GPIOG_PIN15 15U
-
-#define GPIOH_PIN0 0U
-#define GPIOH_PIN1 1U
-#define GPIOH_PIN2 2U
-#define GPIOH_PIN3 3U
-#define GPIOH_PIN4 4U
-#define GPIOH_PIN5 5U
-#define GPIOH_PIN6 6U
-#define GPIOH_PIN7 7U
-#define GPIOH_PIN8 8U
-#define GPIOH_PIN9 9U
-#define GPIOH_PIN10 10U
-#define GPIOH_PIN11 11U
-#define GPIOH_PIN12 12U
-#define GPIOH_PIN13 13U
-#define GPIOH_PIN14 14U
-#define GPIOH_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
-#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-
-#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
-#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
-
-#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
-
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0 - NC
- * PA1 - NC
- * PA2 - COL1
- * PA3 - COL2
- * PA4 - SPEAKER1
- * PA5 - SPEAKER2
- * PA6 - COL3
- * PA7 - COL8
- * PA8 - COL6
- * PA9 - COL7
- * PA10 - ROW5
- * PA11 - USB_DM (alternate 14).
- * PA12 - USB_DP (alternate 14).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - ROW4
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \
- PIN_MODE_ALTERNATE(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_INPUT(GPIOA_PIN7) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_PIN9) | \
- PIN_MODE_INPUT(GPIOA_PIN10) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \
- PIN_OSPEED_HIGH(GPIOA_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
- PIN_OSPEED_HIGH(GPIOA_USB_DM) | \
- PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
- PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
- PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
- PIN_OSPEED_VERYLOW(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOA_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
- PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
- PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_HIGH(GPIOA_PIN7) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_PIN9) | \
- PIN_ODR_HIGH(GPIOA_PIN10) | \
- PIN_ODR_HIGH(GPIOA_USB_DM) | \
- PIN_ODR_HIGH(GPIOA_USB_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 1) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 5) | \
- PIN_AFIO_AF(GPIOA_PIN6, 5) | \
- PIN_AFIO_AF(GPIOA_PIN7, 5))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_PIN9, 0) | \
- PIN_AFIO_AF(GPIOA_PIN10, 0) | \
- PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
- PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - PIN2 (input pullup).
- * PB3 - PIN3 (alternate 0).
- * PB4 - PIN4 (input pullup).
- * PB5 - PIN5 (input pullup).
- * PB6 - PIN6 LSM303DLHC_SCL (alternate 4).
- * PB7 - PIN7 LSM303DLHC_SDA (alternate 4).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_PIN3) | \
- PIN_MODE_INPUT(GPIOB_PIN4) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_PIN6) | \
- PIN_MODE_OUTPUT(GPIOB_PIN7) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \
- PIN_OSPEED_HIGH(GPIOB_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
- PIN_OSPEED_HIGH(GPIOB_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \
- PIN_OSPEED_VERYLOW(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_PIN6) | \
- PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_PIN3) | \
- PIN_ODR_HIGH(GPIOB_PIN4) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_PIN6) | \
- PIN_ODR_LOW(GPIOB_PIN7) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_PIN3, 0) | \
- PIN_AFIO_AF(GPIOB_PIN4, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_PIN6, 4) | \
- PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - PIN0 (input pullup).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PIN3 (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - PIN10 (input pullup).
- * PC11 - PIN11 (input pullup).
- * PC12 - PIN12 (input pullup).
- * PC13 - PIN13 (input pullup).
- * PC14 - PIN14 (input floating).
- * PC15 - PIN15 (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PIN3) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_INPUT(GPIOC_PIN10) | \
- PIN_MODE_INPUT(GPIOC_PIN11) | \
- PIN_MODE_INPUT(GPIOC_PIN12) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_PIN14) | \
- PIN_MODE_INPUT(GPIOC_PIN15))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
- PIN_OSPEED_HIGH(GPIOC_PIN14) | \
- PIN_OSPEED_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOC_PIN15))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PIN3) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_PIN10) | \
- PIN_ODR_HIGH(GPIOC_PIN11) | \
- PIN_ODR_HIGH(GPIOC_PIN12) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_PIN14) | \
- PIN_ODR_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PIN3, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_PIN10, 0) | \
- PIN_AFIO_AF(GPIOC_PIN11, 0) | \
- PIN_AFIO_AF(GPIOC_PIN12, 0) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_PIN14, 0) | \
- PIN_AFIO_AF(GPIOC_PIN15, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - PIN2 (input pullup).
- * PD3 - PIN3 (input pullup).
- * PD4 - PIN4 (input pullup).
- * PD5 - PIN5 (input pullup).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD11 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_INPUT(GPIOD_PIN2) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_INPUT(GPIOD_PIN4) | \
- PIN_MODE_INPUT(GPIOD_PIN5) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
- PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_PIN2) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_PIN4) | \
- PIN_ODR_HIGH(GPIOD_PIN5) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_PIN2, 0) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_PIN4, 0) | \
- PIN_AFIO_AF(GPIOD_PIN5, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - PIN0 (input pullup).
- * PE1 - PIN1 (input pullup).
- * PE2 - PIN2 (input pullup).
- * PE3 - PIN3 L3GD20_CS (output pushpull maximum).
- * PE4 - PIN4 (input pullup).
- * PE5 - PIN5 (input pullup).
- * PE6 - PIN6 (input pullup).
- * PE7 - PIN7 (input pullup).
- * PE8 - PIN8 (output pushpull maximum).
- * PE9 - PIN9 (output pushpull maximum).
- * PE10 - PIN10 (output pushpull maximum).
- * PE11 - PIN11 (output pushpull maximum).
- * PE12 - PIN12 (output pushpull maximum).
- * PE13 - PIN13 (output pushpull maximum).
- * PE14 - PIN14 (output pushpull maximum).
- * PE15 - PIN15 (output pushpull maximum).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
- PIN_MODE_INPUT(GPIOE_PIN1) | \
- PIN_MODE_INPUT(GPIOE_PIN2) |\
- PIN_MODE_OUTPUT(GPIOE_PIN3) | \
- PIN_MODE_INPUT(GPIOE_PIN4) |\
- PIN_MODE_INPUT(GPIOE_PIN5) |\
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_OUTPUT(GPIOE_PIN8) | \
- PIN_MODE_OUTPUT(GPIOE_PIN9) | \
- PIN_MODE_OUTPUT(GPIOE_PIN10) | \
- PIN_MODE_OUTPUT(GPIOE_PIN11) | \
- PIN_MODE_OUTPUT(GPIOE_PIN12) | \
- PIN_MODE_OUTPUT(GPIOE_PIN13) | \
- PIN_MODE_OUTPUT(GPIOE_PIN14) | \
- PIN_MODE_OUTPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
- PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
- PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
- PIN_OSPEED_HIGH(GPIOE_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
- PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
- PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
- PIN_OSPEED_HIGH(GPIOE_PIN8) | \
- PIN_OSPEED_HIGH(GPIOE_PIN9) | \
- PIN_OSPEED_HIGH(GPIOE_PIN10) | \
- PIN_OSPEED_HIGH(GPIOE_PIN11) | \
- PIN_OSPEED_HIGH(GPIOE_PIN12) | \
- PIN_OSPEED_HIGH(GPIOE_PIN13) | \
- PIN_OSPEED_HIGH(GPIOE_PIN14) | \
- PIN_OSPEED_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
- PIN_PUPDR_FLOATING(GPIOE_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
- PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
- PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
- PIN_PUPDR_FLOATING(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
- PIN_ODR_HIGH(GPIOE_PIN1) | \
- PIN_ODR_HIGH(GPIOE_PIN2) | \
- PIN_ODR_HIGH(GPIOE_PIN3) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_LOW(GPIOE_PIN8) | \
- PIN_ODR_LOW(GPIOE_PIN9) | \
- PIN_ODR_LOW(GPIOE_PIN10) | \
- PIN_ODR_LOW(GPIOE_PIN11) | \
- PIN_ODR_LOW(GPIOE_PIN12) | \
- PIN_ODR_LOW(GPIOE_PIN13) | \
- PIN_ODR_LOW(GPIOE_PIN14) | \
- PIN_ODR_LOW(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
- PIN_AFIO_AF(GPIOE_PIN1, 0) | \
- PIN_AFIO_AF(GPIOE_PIN2, 0) |\
- PIN_AFIO_AF(GPIOE_PIN3, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) |\
- PIN_AFIO_AF(GPIOE_PIN5, 0) |\
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
- PIN_AFIO_AF(GPIOE_PIN9, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PIN14, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - I2C2_SDA (input floating).
- * PF1 - I2C2_SCL (input floating).
- * PF2 - PIN2 (input pullup).
- * PF3 - PIN3 (input pullup).
- * PF4 - PIN4 (input pullup).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - PIN9 (input pullup).
- * PF10 - PIN10 (input pullup).
- * PF11 - PIN11 (input pullup).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \
- PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \
- PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
- PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \
- PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \
- PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \
- PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-/*
- * GPIOG setup:
- *
- * PG0 - PIN0 (input pullup).
- * PG1 - PIN1 (input pullup).
- * PG2 - PIN2 (input pullup).
- * PG3 - PIN3 (input pullup).
- * PG4 - PIN4 (input pullup).
- * PG5 - PIN5 (input pullup).
- * PG6 - PIN6 (input pullup).
- * PG7 - PIN7 (input pullup).
- * PG8 - PIN8 (input pullup).
- * PG9 - PIN9 (input pullup).
- * PG10 - PIN10 (input pullup).
- * PG11 - PIN11 (input pullup).
- * PG12 - PIN12 (input pullup).
- * PG13 - PIN13 (input pullup).
- * PG14 - PIN14 (input pullup).
- * PG15 - PIN15 (input pullup).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
- PIN_MODE_INPUT(GPIOG_PIN1) | \
- PIN_MODE_INPUT(GPIOG_PIN2) | \
- PIN_MODE_INPUT(GPIOG_PIN3) | \
- PIN_MODE_INPUT(GPIOG_PIN4) | \
- PIN_MODE_INPUT(GPIOG_PIN5) | \
- PIN_MODE_INPUT(GPIOG_PIN6) | \
- PIN_MODE_INPUT(GPIOG_PIN7) | \
- PIN_MODE_INPUT(GPIOG_PIN8) | \
- PIN_MODE_INPUT(GPIOG_PIN9) | \
- PIN_MODE_INPUT(GPIOG_PIN10) | \
- PIN_MODE_INPUT(GPIOG_PIN11) | \
- PIN_MODE_INPUT(GPIOG_PIN12) | \
- PIN_MODE_INPUT(GPIOG_PIN13) | \
- PIN_MODE_INPUT(GPIOG_PIN14) | \
- PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \
- PIN_OSPEED_VERYLOW(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
- PIN_ODR_HIGH(GPIOG_PIN1) | \
- PIN_ODR_HIGH(GPIOG_PIN2) | \
- PIN_ODR_HIGH(GPIOG_PIN3) | \
- PIN_ODR_HIGH(GPIOG_PIN4) | \
- PIN_ODR_HIGH(GPIOG_PIN5) | \
- PIN_ODR_HIGH(GPIOG_PIN6) | \
- PIN_ODR_HIGH(GPIOG_PIN7) | \
- PIN_ODR_HIGH(GPIOG_PIN8) | \
- PIN_ODR_HIGH(GPIOG_PIN9) | \
- PIN_ODR_HIGH(GPIOG_PIN10) | \
- PIN_ODR_HIGH(GPIOG_PIN11) | \
- PIN_ODR_HIGH(GPIOG_PIN12) | \
- PIN_ODR_HIGH(GPIOG_PIN13) | \
- PIN_ODR_HIGH(GPIOG_PIN14) | \
- PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
- PIN_AFIO_AF(GPIOG_PIN1, 0) | \
- PIN_AFIO_AF(GPIOG_PIN2, 0) | \
- PIN_AFIO_AF(GPIOG_PIN3, 0) | \
- PIN_AFIO_AF(GPIOG_PIN4, 0) | \
- PIN_AFIO_AF(GPIOG_PIN5, 0) | \
- PIN_AFIO_AF(GPIOG_PIN6, 0) | \
- PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
- PIN_AFIO_AF(GPIOG_PIN9, 0) | \
- PIN_AFIO_AF(GPIOG_PIN10, 0) | \
- PIN_AFIO_AF(GPIOG_PIN11, 0) | \
- PIN_AFIO_AF(GPIOG_PIN12, 0) | \
- PIN_AFIO_AF(GPIOG_PIN13, 0) | \
- PIN_AFIO_AF(GPIOG_PIN14, 0) | \
- PIN_AFIO_AF(GPIOG_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0 - PIN0 (input pullup).
- * PH1 - PIN1 (input pullup).
- * PH2 - PIN2 (input pullup).
- * PH3 - PIN3 (input pullup).
- * PH4 - PIN4 (input pullup).
- * PH5 - PIN5 (input pullup).
- * PH6 - PIN6 (input pullup).
- * PH7 - PIN7 (input pullup).
- * PH8 - PIN8 (input pullup).
- * PH9 - PIN9 (input pullup).
- * PH10 - PIN10 (input pullup).
- * PH11 - PIN11 (input pullup).
- * PH12 - PIN12 (input pullup).
- * PH13 - PIN13 (input pullup).
- * PH14 - PIN14 (input pullup).
- * PH15 - PIN15 (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \
- PIN_MODE_INPUT(GPIOH_PIN1) | \
- PIN_MODE_INPUT(GPIOH_PIN2) | \
- PIN_MODE_INPUT(GPIOH_PIN3) | \
- PIN_MODE_INPUT(GPIOH_PIN4) | \
- PIN_MODE_INPUT(GPIOH_PIN5) | \
- PIN_MODE_INPUT(GPIOH_PIN6) | \
- PIN_MODE_INPUT(GPIOH_PIN7) | \
- PIN_MODE_INPUT(GPIOH_PIN8) | \
- PIN_MODE_INPUT(GPIOH_PIN9) | \
- PIN_MODE_INPUT(GPIOH_PIN10) | \
- PIN_MODE_INPUT(GPIOH_PIN11) | \
- PIN_MODE_INPUT(GPIOH_PIN12) | \
- PIN_MODE_INPUT(GPIOH_PIN13) | \
- PIN_MODE_INPUT(GPIOH_PIN14) | \
- PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \
- PIN_OSPEED_VERYLOW(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \
- PIN_ODR_HIGH(GPIOH_PIN1) | \
- PIN_ODR_HIGH(GPIOH_PIN2) | \
- PIN_ODR_HIGH(GPIOH_PIN3) | \
- PIN_ODR_HIGH(GPIOH_PIN4) | \
- PIN_ODR_HIGH(GPIOH_PIN5) | \
- PIN_ODR_HIGH(GPIOH_PIN6) | \
- PIN_ODR_HIGH(GPIOH_PIN7) | \
- PIN_ODR_HIGH(GPIOH_PIN8) | \
- PIN_ODR_HIGH(GPIOH_PIN9) | \
- PIN_ODR_HIGH(GPIOH_PIN10) | \
- PIN_ODR_HIGH(GPIOH_PIN11) | \
- PIN_ODR_HIGH(GPIOH_PIN12) | \
- PIN_ODR_HIGH(GPIOH_PIN13) | \
- PIN_ODR_HIGH(GPIOH_PIN14) | \
- PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \
- PIN_AFIO_AF(GPIOH_PIN1, 0) | \
- PIN_AFIO_AF(GPIOH_PIN2, 0) | \
- PIN_AFIO_AF(GPIOH_PIN3, 0) | \
- PIN_AFIO_AF(GPIOH_PIN4, 0) | \
- PIN_AFIO_AF(GPIOH_PIN5, 0) | \
- PIN_AFIO_AF(GPIOH_PIN6, 0) | \
- PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
- PIN_AFIO_AF(GPIOH_PIN9, 0) | \
- PIN_AFIO_AF(GPIOH_PIN10, 0) | \
- PIN_AFIO_AF(GPIOH_PIN11, 0) | \
- PIN_AFIO_AF(GPIOH_PIN12, 0) | \
- PIN_AFIO_AF(GPIOH_PIN13, 0) | \
- PIN_AFIO_AF(GPIOH_PIN14, 0) | \
- PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-// #define usb_lld_connect_bus(usbp)
-#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
-// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-// #define usb_lld_disconnect_bus(usbp)
-#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
-// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk
deleted file mode 100644
index 43377629a..000000000
--- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC
diff --git a/keyboards/preonic/rev3/bootloader_defs.h b/keyboards/preonic/rev3/bootloader_defs.h
deleted file mode 100644
index 3b0e9d20a..000000000
--- a/keyboards/preonic/rev3/bootloader_defs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/keyboards/preonic/rev3/chconf.h b/keyboards/preonic/rev3/chconf.h
deleted file mode 100644
index b52ca7d2c..000000000
--- a/keyboards/preonic/rev3/chconf.h
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 16
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 10000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM TRUE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h
index 98899dc6a..3dc9dc4eb 100644
--- a/keyboards/preonic/rev3/config.h
+++ b/keyboards/preonic/rev3/config.h
@@ -43,6 +43,10 @@
* #define UNUSED_PINS
*/
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+
#define MUSIC_MAP
#undef AUDIO_VOICES
#undef C6_AUDIO
diff --git a/keyboards/preonic/rev3/halconf.h b/keyboards/preonic/rev3/halconf.h
deleted file mode 100644
index 5e5d70219..000000000
--- a/keyboards/preonic/rev3/halconf.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC TRUE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
-#endif
-
-/**
- * @brief Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB TRUE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 1
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/keyboards/preonic/rev3/matrix.c b/keyboards/preonic/rev3/matrix.c
index 05f6da71b..db7a4f2a3 100644
--- a/keyboards/preonic/rev3/matrix.c
+++ b/keyboards/preonic/rev3/matrix.c
@@ -21,10 +21,6 @@ static matrix_col_t matrix_debouncing[MATRIX_COLS];
static bool debouncing = false;
static uint16_t debouncing_time = 0;
-static uint8_t encoder_state = 0;
-static int8_t encoder_value = 0;
-static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 };
-
static bool dip_switch[4] = {0, 0, 0, 0};
__attribute__ ((weak))
@@ -53,12 +49,6 @@ void matrix_init(void) {
palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLUP);
palSetPadMode(GPIOB, 9, PAL_MODE_INPUT_PULLUP);
- // encoder setup
- palSetPadMode(GPIOB, 12, PAL_MODE_INPUT_PULLUP);
- palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP);
-
- encoder_state = (palReadPad(GPIOB, 12) << 0) | (palReadPad(GPIOB, 13) << 1);
-
// actual matrix setup
palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
@@ -110,18 +100,6 @@ uint8_t matrix_scan(void) {
}
memcpy(last_dip_switch, dip_switch, sizeof(&dip_switch));
- // encoder on B12 and B13
- encoder_state <<= 2;
- encoder_state |= (palReadPad(GPIOB, 12) << 0) | (palReadPad(GPIOB, 13) << 1);
- encoder_value += encoder_LUT[encoder_state & 0xF];
- if (encoder_value >= ENCODER_RESOLUTION) {
- encoder_update(0);
- }
- if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
- encoder_update(1);
- }
- encoder_value %= ENCODER_RESOLUTION;
-
// actual matrix
for (int col = 0; col < MATRIX_COLS; col++) {
matrix_col_t data = 0;
diff --git a/keyboards/preonic/rev3/mcuconf.h b/keyboards/preonic/rev3/mcuconf.h
deleted file mode 100644
index 2d27bee4e..000000000
--- a/keyboards/preonic/rev3/mcuconf.h
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_USART2SW STM32_USART2SW_PCLK
-#define STM32_USART3SW STM32_USART3SW_PCLK
-#define STM32_UART4SW STM32_UART4SW_PCLK
-#define STM32_UART5SW STM32_UART5SW_PCLK
-#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE FALSE
-#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_ADC4_DMA_PRIORITY 2
-#define STM32_ADC_ADC12_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_IRQ_PRIORITY 5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 TRUE
-#define STM32_GPT_USE_TIM7 TRUE
-#define STM32_GPT_USE_TIM8 TRUE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 10
-#define STM32_I2C_I2C2_IRQ_PRIORITY 10
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 TRUE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 TRUE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 4
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-#endif /* MCUCONF_H */
diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk
index 7c40d514d..0c171b2fb 100644
--- a/keyboards/preonic/rev3/rules.mk
+++ b/keyboards/preonic/rev3/rules.mk
@@ -1,56 +1,24 @@
# project specific files
-SRC = matrix.c
+SRC = matrix.c
LAYOUTS += ortho_5x12
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
# Cortex version
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover
+NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = yes # Custom matrix file
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
# SERIAL_LINK_ENABLE = yes
+ENCODER_ENABLE = yes